Slap MessageBoards

Skateboarding => USELESS WOODEN TOY BANTER => Topic started by: JusticeAbberdash on September 10, 2017, 10:21:17 PM

Title: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 10, 2017, 10:21:17 PM
You name it, I've heard about it second hand ??? Never underestimate the depth of my worldwide skate contacts. If I say something I wasn't supposed to, I'll focus my account right away.
Title: Re: I am the ultimate industry insider, AMA
Post by: h00man on September 10, 2017, 10:33:52 PM
Describe in detail, Nyjah's Nike contract.
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 10, 2017, 10:37:38 PM
Describe in detail, Nyjah's Nike contract.

It used to be a bigger, more glamorous deal. Nike has slowly sized down their SB budget. Nyjah has too many "outside" investments, add to that his failure to follow certain trends, leads to NJ only being worth a $500,000 commitment.
Title: Re: I am the ultimate industry insider, AMA
Post by: doublesteveburger on September 10, 2017, 10:54:00 PM
What's the rest of Brinks story.
Title: Re: I am the ultimate industry insider, AMA
Post by: Schmaltz on September 10, 2017, 11:02:06 PM
If i melt dry ice can i swim without getting wet?
Title: Re: I am the ultimate industry insider, AMA
Post by: dr.prestige on September 10, 2017, 11:09:45 PM
How many people do you know with science or engineering backgrounds that are part of a company in the skateboard industry? Are there any occupations in skateboarding that are specifically suited for people with science or engineering training and experience?
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 10, 2017, 11:38:25 PM
What's the rest of Brinks story.

Brink was a desperate hooligan ready to say anything for a paycheque. That's the rest of the story 8)
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 10, 2017, 11:49:38 PM
How many people do you know with science or engineering backgrounds that are part of a company in the skateboard industry? Are there any occupations in skateboarding that are specifically suited for people with science or engineering training and experience?

Not as many as you'd think. As some already know, 80% of the hard goods industry is marketing and distributing. Anything relating to manufacturing skategoods/doing R & D etc.. is tough to break into. As always, networking is gold, the actual engineering of wheels, trucks, and decks is a pretty tiny group of workers (compared to a lot of other industries a sci/eng type could work in).

This is why you see so many new projects in the longboard world, regular skateboards are hard to find design/engineering opportunities in.
Title: Re: I am the ultimate industry insider, AMA
Post by: other2 on September 11, 2017, 12:05:26 AM
Girl/Chocolate... what's actually going on?
Title: Re: I am the ultimate industry insider, AMA
Post by: SodaJerk on September 11, 2017, 12:12:56 AM
Girl/Chocolate... what's actually going on?
This, and please be in depth about Rickk, Mike, Megan and Spike. The entire Crail shtick seems to have been a series of inside jokes steeped in veiled elitism , do they really care about us? What have they really given back to skateboarding?
Title: Re: I am the ultimate industry insider, AMA
Post by: Gray Imp Sausage Metal on September 11, 2017, 12:14:35 AM
why does Brink avoid touching on the subject of Chase every time he comes on here (yet defended him on here by claiming to know the whole story)?
Also, Jereme Rogers' rap career is the longest ongoing troll in the history of skateboarding right? RIGHT?
Title: Re: I am the ultimate industry insider, AMA
Post by: SodaJerk on September 11, 2017, 12:16:54 AM
why does Brink avoid touching on the subject of Chase every time he comes on here (yet defended him on here by claimed to know the whole story)?
Also, Jereme Rogers' rap career is the longest ongoing troll in the history of skateboarding right? RIGHT?
I think I can handle this one. No, not a troll. The world just isn't ready to recognise his genius yet.
Title: Re: I am the ultimate industry insider, AMA
Post by: Grind King Rims on September 11, 2017, 12:29:23 AM
Why is Jadakiss as hard as it gets?
Title: Re: I am the ultimate industry insider, AMA
Post by: Gray Imp Sausage Metal on September 11, 2017, 12:39:13 AM
I think I can handle this one. No, not a troll. The world just isn't ready to recognise his genius yet.
I WANT TO BELIEVE!
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 11, 2017, 12:44:58 AM
Girl/Chocolate... what's actually going on?

I'm not gonna put anyone specifically on blast, but girl/chocolate has been a significant part of the fashion and "cultural cultivation" business. They've gotten so used to cushy high society sponsorship that they stopped paying attention to what the average joe skater cares about.
Title: Re: I am the ultimate industry insider, AMA
Post by: SodaJerk on September 11, 2017, 12:49:56 AM
Expand Quote
Girl/Chocolate... what's actually going on?
[close]

I'm not gonna put anyone specifically on blast, but girl/chocolate has been a significant part of the fashion and "cultural cultivation" business. They've gotten so used to cushy high society sponsorship that they stopped paying attention to what the average joe skater cares about.
So you're saying Sam Smyth has a Napoleonic syndrome that has infected the business by osmosis.
Title: Re: I am the ultimate industry insider, AMA
Post by: Mate. on September 11, 2017, 01:02:13 AM
Why hasn't grip tape bee. Replaced by a shoe-friendly alternative? Is the shoe industry suppressing it all?
Title: Re: I am the ultimate industry insider, AMA
Post by: Paco Supreme on September 11, 2017, 01:30:42 AM
Just how far did the screwdriver go
Title: Re: I am the ultimate industry insider, AMA
Post by: colt cannon lunchbox on September 11, 2017, 01:46:36 AM
Why hasn't grip tape bee. Replaced by a shoe-friendly alternative? Is the shoe industry suppressing it all?

There is many different variations of shoe friendly grip but they're all really shit
Title: Re: I am the ultimate industry insider, AMA
Post by: colt cannon lunchbox on September 11, 2017, 01:49:53 AM
How the fuck are all of the smaller skate shoe companies surviving? Is DVS even paying Walker?
Title: Re: I am the ultimate industry insider, AMA
Post by: Ghost Face on September 11, 2017, 03:13:12 AM
Why'd Rowely leave Flip?
Title: Re: I am the ultimate industry insider, AMA
Post by: sms_b on September 11, 2017, 03:38:07 AM
Did Sean Pablo bring it down the pipe to Miami?
Title: Re: I am the ultimate industry insider, AMA
Post by: Grind King Rims on September 11, 2017, 04:04:50 AM
Why'd Rowely leave Flip?
And is he currently involved in a lawsuit against them?
Title: Re: I am the ultimate industry insider, AMA
Post by: super-basic on September 11, 2017, 04:21:20 AM
If i melt dry ice can i swim without getting wet?

CO2 can't exist as a liquid at standard atm pressure, so it sublimates into a gas, it doesn't melt.
Title: Re: I am the ultimate industry insider, AMA
Post by: Esquivel on September 11, 2017, 04:24:29 AM
^what if we increased the pressure?


Just how far did the screwdriver go

I also do not recall coming to a conclusion on whether it was a flathead, phillips or pozidriv
Title: Re: I am the ultimate industry insider, AMA
Post by: augustmoon on September 11, 2017, 05:55:28 AM
^what if we increased the pressure?


Expand Quote
Just how far did the screwdriver go
[close]

I also do not recall coming to a conclusion on whether it was a flathead, phillips or pozidriv

Chase looks like a Torx man to me
Title: Re: I am the ultimate industry insider, AMA
Post by: Pigeon on September 11, 2017, 06:17:59 AM
How many anal probes has Berra conducted?
Title: Re: I am the ultimate industry insider, AMA
Post by: ducky darnsworth on September 11, 2017, 06:29:15 AM
is ti true that the industry encourages drinking/partying/dropping out of school so the skaters wont be the wiser when the company's make all the profit while paying skaters pennys on the dollar for representing their subpar products?
Title: Re: I am the ultimate industry insider, AMA
Post by: QueeferMadness on September 11, 2017, 06:36:34 AM
Expand Quote
^what if we increased the pressure?


Expand Quote
Just how far did the screwdriver go
[close]

I also do not recall coming to a conclusion on whether it was a flathead, phillips or pozidriv
[close]

Chase looks like a Torx man to me

Probably a ratcheting one at that
Title: Re: I am the ultimate industry insider, AMA
Post by: GershonSweaty on September 11, 2017, 06:40:38 AM
With regards to crailtap why do they so often jump on trends late when realistically they should focus on what makes them popular and provide more of the same ? The whole flowers/women thing was really contrived.

How much intimidation exists ? Obviously Mickey Reyes stuff has been fairly well documented but is there any other examples ?

Have Dwindle bought into Revive ?

Does Nike have a controlling factor of Skate Mental

Why didn't Al Boglio and Jeremie Daclain go ahead with bonjour skateboards

Is Pontus a sex fiend ?

How is Clark Hassler still Pro ?

 
Title: Re: I am the ultimate industry insider, AMA
Post by: Esquivel on September 11, 2017, 07:27:44 AM
Expand Quote
^what if we increased the pressure?


Expand Quote
Just how far did the screwdriver go
[close]

I also do not recall coming to a conclusion on whether it was a flathead, phillips or pozidriv
[close]

Chase looks like a Torx man to me

(https://s26.postimg.org/aihz2mnhh/chasetool.jpg) (https://postimg.org/image/aihz2mnhh/)
Title: Re: I am the ultimate industry insider, AMA
Post by: MC3 on September 11, 2017, 07:41:08 AM
Word on the street is Brian Anderson is gay...
Title: Re: I am the ultimate industry insider, AMA
Post by: Ankle_Lift on September 11, 2017, 09:25:29 AM
What's the deal with braydon szafranski? Has he ever tried to get back onto Baker?

Also, does Ed Templeton even skate anymore, or does he just sit around and eat vegan cupcakes?
Title: Re: I am the ultimate industry insider, AMA
Post by: pizzafliptofakie on September 11, 2017, 09:36:49 AM
What is "it" crazy like?
Title: Re: I am the ultimate industry insider, AMA
Post by: Big Baby Jesus on September 11, 2017, 09:39:45 AM
why does Brink avoid touching on the subject of Chase every time he comes on here (yet defended him on here by claiming to know the whole story)?
Also, Jereme Rogers' rap career is the longest ongoing troll in the history of skateboarding right? RIGHT?

My theory is Brink only knows the whole story because he's the one who got screwdrived...
Title: Re: I am the ultimate industry insider, AMA
Post by: mooraga on September 11, 2017, 10:50:48 AM
Expand Quote
why does Brink avoid touching on the subject of Chase every time he comes on here (yet defended him on here by claiming to know the whole story)?
Also, Jereme Rogers' rap career is the longest ongoing troll in the history of skateboarding right? RIGHT?
[close]

My theory is Brink only knows the whole story because he's the one who got screwdrived...

 ::)
Title: Re: I am the ultimate industry insider, AMA
Post by: dirty ol man on September 11, 2017, 11:04:49 AM
what is Nora's cup size?

did a few stretches on 9-club skate copa, something going on there.
Title: Re: I am the ultimate industry insider, AMA
Post by: Tyroneshoelaces on September 11, 2017, 11:25:24 AM
ROBERT BRINK I LIKE YOU BUT WHY DO YOU DEFEND CHASE GABOR.  IT KEEPS ME FROM LOVING YOU.  SO IF THE SCREWDRIVER DID INDEED GO UP A NON-WELCOMING RECTUM WHAT MORE OF A STORY COULD THERE BE?   

Title: Re: I am the ultimate industry insider, AMA
Post by: headtowall on September 11, 2017, 11:47:28 AM
what is Nora's cup size?
Reported
Title: Re: I am the ultimate industry insider, AMA
Post by: JB on September 11, 2017, 12:50:47 PM
is sheckler finally ready to release that secret part?

we've all seen it, im just wondering in hes ready to make it public.
Title: Re: I am the ultimate industry insider, AMA
Post by: Babby on September 11, 2017, 01:08:19 PM
Who is the new 917 pro?
Title: Re: I am the ultimate industry insider, AMA
Post by: Guwop on September 11, 2017, 02:37:14 PM
is sheckler finally ready to release that secret part?

we've all seen it, im just wondering in hes ready to make it public.

Jesus I've been wanting to re watch that ever since it got taken down, one of the best parts of the time.
Title: Re: I am the ultimate industry insider, AMA
Post by: sid vicious on September 11, 2017, 02:47:07 PM
Did flip attempt to have appleyards work visa cancelled when he quit forcing him back too Canada?
Did he get his finally years pay ever
Title: Re: I am the ultimate industry insider, AMA
Post by: Zak on September 11, 2017, 03:11:16 PM
Will anyone on Slap ever back Pizza skateboards?
Title: Re: I am the ultimate industry insider, AMA
Post by: fangen on September 11, 2017, 04:01:20 PM
Who is the new 917 pro?

Some dude on Nike. 917, the elite country club squad.
Title: Re: I am the ultimate industry insider, AMA
Post by: Lorn Au Arcos on September 11, 2017, 04:02:46 PM
Did flip attempt to have appleyards work visa cancelled when he quit, forcing him back too Canada?
Did he get his finally years pay ever?


Title: Re: I am the ultimate industry insider, AMA
Post by: offkilter on September 11, 2017, 04:04:57 PM
Expand Quote
what is Nora's cup size?
[close]
Reported
Title: Re: I am the ultimate industry insider, AMA
Post by: QueeferMadness on September 11, 2017, 05:37:20 PM
Will don't fear the reefer ever get unbanned??
Title: Re: I am the ultimate industry insider, AMA
Post by: Mr. Fink on September 11, 2017, 06:24:51 PM
What year is this?
Title: Re: I am the ultimate industry insider, AMA
Post by: Donald Rump on September 11, 2017, 06:30:49 PM
Just how far did the screwdriver go

Adding to this which end of the screwdriver went up?

I'd personally prefer the handle if I had a choice.
Title: Re: I am the ultimate industry insider, AMA
Post by: wheelies on September 11, 2017, 06:42:45 PM
Well if your a industry insider, whats inside of the industry then?
Title: Re: I am the ultimate industry insider, AMA
Post by: georgethecat on September 11, 2017, 07:03:18 PM
Well if your a industry insider, whats inside of the industry then?

Rocco watching porn while riding a unicorn wearing only a pair of Sheeps
Title: Re: I am the ultimate industry insider, AMA
Post by: Gray Imp Sausage Metal on September 11, 2017, 07:20:52 PM
tell us about the conspiracy at Adidas whereby all of Silas' shoe are pretty much amazing and yet they've slowly reduced him to one colourway on a vulc when clearly he's not a even a vulc guy.
Meanwhile match courts/ seeleys get a whole fucking bukkake of colourways and everyone goes nuts over them ???
Title: Re: I am the ultimate industry insider, AMA
Post by: venture5.8 on September 11, 2017, 07:41:13 PM
Who is the new 917 pro?
When will we get a Nik Stain pro board???
Title: Re: I am the ultimate industry insider, AMA
Post by: mooraga on September 11, 2017, 07:47:40 PM
how can new balance sell their pj's v2 at the same price (or cheaper) than the janoski's?
...dunno why I'm asking this but they are fucking amazing for the price  ;)
Title: Re: I am the ultimate industry insider, AMA
Post by: Allez_Jambon on September 11, 2017, 07:53:40 PM
Can you just tell us stuff that we're not going to ask because you're dying to tell us anyway?
Title: Re: I am the ultimate industry insider, AMA
Post by: Paletta on September 11, 2017, 09:21:48 PM
How many people do you know with science or engineering backgrounds that are part of a company in the skateboard industry? Are there any occupations in skateboarding that are specifically suited for people with science or engineering training and experience?

I am a Civil Engineer and currently building a skatepark fo a local government.
Not technically in the industry but a childhood dream come true  :)
Title: Re: I am the ultimate industry insider, AMA
Post by: Fecal Fury on September 11, 2017, 09:26:18 PM
Favourite Skater?
Favourite Video?
Favourite Video Part?
Favourite Style?
Most Talented Skater on Planet Earth?
Favourite Trick?
Hardest Trick for you?
Most Illegal Trick?
Favourite Clip you've ever gotten?
Gnarliest trick you've ever witnessed?
Worst Bunt of your career?
What Trick was the biggest battle for you to land?
Who's your Guilty Pleasure Skater?
Favourite Local Brand?
Favourite Local Skater?
Favourite Teammate ever?
Worst Company?
Worst Trend?
Worst Style?
Last Person you want on the sesh?

Can ya boy get a box ya diiggg?
Title: Re: I am the ultimate industry insider, AMA
Post by: Ronald Wilson Reagan on September 11, 2017, 10:40:01 PM
Expand Quote
Expand Quote
what is Nora's cup size?
[close]
Reported
[close]
Get it?! Cool guys are weird and creepy, and people who don't like creeps are uptight nerds!
Title: Re: I am the ultimate industry insider, AMA
Post by: IHOP on September 11, 2017, 11:03:39 PM
Who is the new 917 pro?

cyrus duh
Title: Re: I am the ultimate industry insider, AMA
Post by: IHOP on September 11, 2017, 11:06:40 PM
Did elijah to FA already get mentioned on SLAP yet
Title: Re: I am the ultimate industry insider, AMA
Post by: Atiba Applebum on September 12, 2017, 12:35:10 AM
Expand Quote
Expand Quote
Expand Quote
what is Nora's cup size?
[close]
Reported
[close]
[close]
Get it?! Cool guys are weird and creepy, and people who don't like creeps are uptight nerds!


woah he's back...and perhaps not getting the "reported" thing that happened during his absence
Title: Re: I am the ultimate industry insider, AMA
Post by: fangen on September 12, 2017, 01:08:13 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
what is Nora's cup size?
[close]
Reported
[close]
[close]
Get it?! Cool guys are weird and creepy, and people who don't like creeps are uptight nerds!
[close]


woah he's back...and perhaps not getting the "reported" thing that happened during his absence

Nobody is more easily triggered than this questionable character.
Title: Re: I am the ultimate industry insider, AMA
Post by: QueeferMadness on September 12, 2017, 04:59:16 AM
Did elijah to FA already get mentioned on SLAP yet

Ewww I hope not
Title: Re: I am the ultimate industry insider, AMA
Post by: Jerkstore on September 12, 2017, 05:26:50 AM
Expand Quote
Did elijah to FA already get mentioned on SLAP yet
[close]

Ewww I hope not

longtime coming, elijah is way too good for chocolate
Title: Re: I am the ultimate industry insider, AMA
Post by: Mcfctid on September 12, 2017, 07:04:07 AM
Why did they stop making "rims" ?


(https://i.ebayimg.com/images/g/OdsAAOSwKfVXJ2HA/s-l300.jpg)
Title: Re: I am the ultimate industry insider, AMA
Post by: Francis Xavier on September 12, 2017, 07:06:51 AM
Why did they stop making "rims" ?


(https://i.ebayimg.com/images/g/OdsAAOSwKfVXJ2HA/s-l300.jpg)

Because theres babydubs wheels
Title: Re: I am the ultimate industry insider, AMA
Post by: Grind King Rims on September 12, 2017, 07:18:00 AM
Expand Quote
Why did they stop making "rims" ?


(https://i.ebayimg.com/images/g/OdsAAOSwKfVXJ2HA/s-l300.jpg)

[close]
Because theres babydubs wheels

Looks like we got a right pair of fucking comedians over here.

Motherfuckers, rims are for life.
They WORK god damn it!
Why won't you people listen to me?!
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 12, 2017, 07:18:19 AM
How the fuck are all of the smaller skate shoe companies surviving? Is DVS even paying Walker?

There's a few smaller core companies that survive due to secret absorption into "big sporting goods". Since sales are so shitty, all they're able to do is keep the doors open (no crazy budgets or risky shoes).
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 12, 2017, 07:25:31 AM
Why'd Rowely leave Flip?

I would say, but I wouldnt want to be

REPORTED
Title: Re: I am the ultimate industry insider, AMA
Post by: Cuban_Lynx on September 12, 2017, 07:48:02 AM
Seriously, where the fuck is my Killer tape?
Title: Re: I am the ultimate industry insider, AMA
Post by: thebacker on September 12, 2017, 07:52:54 AM
5 best rappers of all time?
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 12, 2017, 08:35:43 AM
is ti true that the industry encourages drinking/partying/dropping out of school so the skaters wont be the wiser when the company's make all the profit while paying skaters pennys on the dollar for representing their subpar products?

Why you gotta ask the hard questions?! :o It depends on what section of the industry we're talking about.. skateboarding "taps" a certain risk taking/freewheeling mindset. Plenty of pro level skaters would've become drunk/drugged out lunatics if they weren't skating all the time. It's not a conspiracy, its just people prone to substance abuse trying to make as much money as possible (with popular culture still romanticizing all kinds of mind altering substances).

If you're willing to put the effort in, you can put your real life on hold and have skating be your main "thing". There might not be a focused effort to exploit and push harmful lifestyles, but some companies will indirectly profit from them. This is why older skaters always have a place in the market, there's an unspoken narrative that your youth is for busting your ass (so that in your middle age you can have fun/be healthy and stay relevant).

Could it be that young skaters will think older rippers are boring, and older skaters will usually appreciate mature healthy people skating for enjoyment (instead of crushing huge gaps and snapping every bone in their body). If you think in terms of advertising, you need people in every category of lifestyles. There's always going to be PD and people drinking coconut water.
Title: Re: I am the ultimate industry insider, AMA
Post by: Emerson on September 12, 2017, 08:39:08 AM
Mike Sinclair's cup size?
Title: Re: I am the ultimate industry insider, AMA
Post by: Pigeon on September 12, 2017, 08:46:05 AM
5 best rappers of all time?
Dylan (I spit hot fire) (http://www.youtube.com/watch?v=5HRY4LUl5lc#)
Title: Re: I am the ultimate industry insider, AMA
Post by: calvinsdream on September 12, 2017, 08:47:34 AM
Expand Quote
Why'd Rowely leave Flip?
[close]

I would say, but I wouldnt want to be

REPORTED


Just beat the joke into a nice, bloody, pulp
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 12, 2017, 08:52:20 AM
With regards to crailtap why do they so often jump on trends late when realistically they should focus on what makes them popular and provide more of the same ? The whole flowers/women thing was really contrived.

How much intimidation exists ? Obviously Mickey Reyes stuff has been fairly well documented but is there any other examples ?

Have Dwindle bought into Revive ?

Does Nike have a controlling factor of Skate Mental

Why didn't Al Boglio and Jeremie Daclain go ahead with bonjour skateboards

Is Pontus a sex fiend ?

How is Clark Hassler still Pro ?

 

That's too much inside information! Like I said, crailtap doesn't operate like a traditional skate company anymore. If they stick around for a few more years they'll be forced to go back to what fans want.

Revive is independent, nike is pulling back their SB budget. Revive ironically has a few sponsors that don't want their name attached to the brand (we'll give you product, but don't mention our name). Revive/braille makes money, but its built on a house of cards!

Title: Re: I am the ultimate industry insider, AMA
Post by: perverted super otaku! on September 12, 2017, 08:59:42 AM
If the Flip guys were embezzling funds/hiding some of Geoff's share of the pie ,resulting in a lawsuit to get the money he was owed, wink twice
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 12, 2017, 09:01:56 AM
What's the deal with braydon szafranski? Has he ever tried to get back onto Baker?

Also, does Ed Templeton even skate anymore, or does he just sit around and eat vegan cupcakes?

Mr. Szafranski lost focus! Personality can never replace skating, he just got distracted by the party bee-bop hip-hop skiddly-bop lifestyle. There's still a chance for him to get a new pro board on baker, the boss is still in the SZA business!

Templeton?! don't you dare speak his name, he owes every one a backside blunt, WHY ARE YOU WALKING ED?!?!
Title: Re: I am the ultimate industry insider, AMA
Post by: Watson on September 12, 2017, 09:21:06 AM
What did Rodney whisper it Twuan's ear?
Title: Re: I am the ultimate industry insider, AMA
Post by: Ronald Wilson Reagan on September 12, 2017, 10:00:00 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
what is Nora's cup size?
[close]
Reported
[close]
[close]
Get it?! Cool guys are weird and creepy, and people who don't like creeps are uptight nerds!
[close]


woah he's back...and perhaps not getting the "reported" thing that happened during his absence
[close]

Nobody is more easily triggered than this questionable character.
"
At least I don't obviously focus accounts and start new ones. That really comes off as triggered and pathetic. "Nobody likes me...it must be my username, if I start over with a new account nobody will know that I got hated off the site before!" Except its REALLY obvious...
Title: Re: I am the ultimate industry insider, AMA
Post by: Atiba Applebum on September 12, 2017, 10:33:17 AM
Expand Quote
What's the deal with braydon szafranski? Has he ever tried to get back onto Baker?

Also, does Ed Templeton even skate anymore, or does he just sit around and eat vegan cupcakes?
[close]

Mr. Szafranski lost focus! Personality can never replace skating, he just got distracted by the party bee-bop hip-hop skiddly-bop lifestyle. There's still a chance for him to get a new pro board on baker, the boss is still in the SZA business!

Templeton?! don't you dare speak his name, he owes every one a backside blunt, WHY ARE YOU WALKING ED?!?!

Is Braydon the first baker boy to have the same nickname as a musician before the musician uses it?
Title: Re: I am the ultimate industry insider, AMA
Post by: Tyroneshoelaces on September 12, 2017, 10:47:53 AM
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
Title: Re: I am the ultimate industry insider, AMA
Post by: Nosferatu on September 12, 2017, 11:32:53 AM
this thread has me questioning everything I thought I knew about the skateboard industry.
Title: Re: I am the ultimate industry insider, AMA
Post by: Francis Xavier on September 12, 2017, 12:14:39 PM
Mike Sinclair's cup size?
He was a 38C but I think he went down to 34 judging by pics
Title: Re: I am the ultimate industry insider, AMA
Post by: Mcfctid on September 12, 2017, 12:27:20 PM
Expand Quote
Expand Quote
Why did they stop making "rims" ?


(https://i.ebayimg.com/images/g/OdsAAOSwKfVXJ2HA/s-l300.jpg)

[close]
Because theres babydubs wheels
[close]

Looks like we got a right pair of fucking comedians over here.

Motherfuckers, rims are for life.
They WORK god damn it!
Why won't you people listen to me?!


Man, you really like rims
Title: Re: I am the ultimate industry insider, AMA
Post by: Billy Ocean on September 12, 2017, 01:27:45 PM
Can you kick flip?

What ABEC are your bearings?

Want to play skate?
Title: Re: I am the ultimate industry insider, AMA
Post by: Ronald Wilson Reagan on September 12, 2017, 02:23:07 PM
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
Title: Re: I am the ultimate industry insider, AMA
Post by: Grind King Rims on September 12, 2017, 02:26:07 PM
Expand Quote
Expand Quote
Expand Quote
Why did they stop making "rims" ?


(https://i.ebayimg.com/images/g/OdsAAOSwKfVXJ2HA/s-l300.jpg)

[close]
Because theres babydubs wheels
[close]

Looks like we got a right pair of fucking comedians over here.

Motherfuckers, rims are for life.
They WORK god damn it!
Why won't you people listen to me?!

[close]

Man, you really like rims
To be completely honest, they were kind of shit. I don't know how it worked, but in my experience they seemed to keep dirt in the bearing. I think it was the same principle that popping the shields somehow let more dirt out of your bearings. It doesn't make sense, but it works.

Now tail devils: those I would genuinely like to buy again.
Title: Re: I am the ultimate industry insider, AMA
Post by: stevedave on September 12, 2017, 03:25:45 PM
Expand Quote
Mike Sinclair's cup size?
[close]
He was a 38C but I think he went down to 34 judging by pics

I thought that, but then I was thinking, maybe he's asking about Big Gulps.  I can see Sinclair with one of those 96oz mugs of Slurpee or Cherry Vanilla Dr. Pepper x Mtn. Dew collabo that the truckers are always drinking. 
Title: Re: I am the ultimate industry insider, AMA
Post by: Pigeon on September 12, 2017, 03:46:03 PM
What's are the length/girth measurements of everyone's penises?
Title: Re: I am the ultimate industry insider, AMA
Post by: fangen on September 12, 2017, 04:11:10 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
what is Nora's cup size?
[close]
Reported
[close]
[close]
Get it?! Cool guys are weird and creepy, and people who don't like creeps are uptight nerds!
[close]


woah he's back...and perhaps not getting the "reported" thing that happened during his absence
[close]

Nobody is more easily triggered than this questionable character.
[close]
"
At least I don't obviously focus accounts and start new ones. That really comes off as triggered and pathetic. "Nobody likes me...it must be my username, if I start over with a new account nobody will know that I got hated off the site before!" Except its REALLY obvious...


hahah. Your explosive temperament is way too easy to draw out.

https://en.wikipedia.org/wiki/Intermittent_explosive_disorder
Title: Re: I am the ultimate industry insider, AMA
Post by: Joust Ostrich on September 12, 2017, 04:43:43 PM
Did the Bones Brigade ever, you know, gay off?

Title: Re: I am the ultimate industry insider, AMA
Post by: Cherb on September 12, 2017, 05:05:39 PM
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
Yeah Trump sucks and all, but he didn't invent the alt-left term. The alt-left is the super far left just like the alt-right is the super far right. Both of these groups tend to resort to intimidation and violence to push their ideologies. And both of them suck.
Title: Re: I am the ultimate industry insider, AMA
Post by: Buck Russell on September 12, 2017, 05:35:21 PM
Expand Quote
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
[close]
Yeah Trump sucks and all, but he didn't invent the alt-left term. The alt-left is the super far left just like the alt-right is the super far right. Both of these groups tend to resort to intimidation and violence to push their ideologies. And both of them suck.

lol ronron is back and hes more of a blithering idiot than ever. go back to your hole you provincial dipshit.
Title: Re: I am the ultimate industry insider, AMA
Post by: Francis Xavier on September 12, 2017, 06:28:25 PM
Expand Quote
Expand Quote
Mike Sinclair's cup size?
[close]
He was a 38C but I think he went down to 34 judging by pics
[close]

I thought that, but then I was thinking, maybe he's asking about Big Gulps.  I can see Sinclair with one of those 96oz mugs of Slurpee or Cherry Vanilla Dr. Pepper x Mtn. Dew collabo that the truckers are always drinking. 
Oh shit like those half gallon therm mugs?! Yea he has have a few of those on deck with cola cocktails
Title: Re: I am the ultimate industry insider, AMA
Post by: Cuban_Lynx on September 12, 2017, 07:27:32 PM
Did Popps ever get the ATL Twins' email?
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 12, 2017, 07:30:40 PM
what is Nora's cup size?

did a few stretches on 9-club skate copa, something going on there.

You son of a bitch!! :o you can't ask those kinds of sexual questions.. you need to find out like I did!

reported!
Title: Re: I am the ultimate industry insider, AMA
Post by: wheelies on September 12, 2017, 07:37:19 PM
Expand Quote
what is Nora's cup size?

did a few stretches on 9-club skate copa, something going on there.
[close]

You son of a bitch!! :o you can't ask those kinds of sexual questions.. you need to find out like I did!

reported!
Panty raid?
Title: Re: I am the ultimate industry insider, AMA
Post by: other2 on September 12, 2017, 07:45:56 PM
Tell me what you know about industry dude "Adrian Cramp" aka Crampy
Title: Re: I am the ultimate industry insider, AMA
Post by: AllBranFlakes69 on September 12, 2017, 08:06:53 PM
What is "it" crazy like?

 :D :D :D ;D ;D ;D
Title: Re: I am the ultimate industry insider, AMA
Post by: pabloalvarado on September 12, 2017, 09:37:16 PM
What is that thing Guy Mariano means ?
Title: Re: I am the ultimate industry insider, AMA
Post by: Daniel on September 12, 2017, 11:03:04 PM
How do companies find clothing and board manufacturers?
If I were to try and create a company and make boards through bbs, generator, or ps,
how do I go about contacting the manufacturers? Who would I contact to make clothes?
It may seem unrealistic to start a brand or company in skateboarding and expect to
Do well with all these brands popping up. I just want to know out of curiosity.
Title: Re: I am the ultimate industry insider, AMA
Post by: Paul Cicero on September 12, 2017, 11:15:37 PM
Did Popps ever get the ATL Twins' email?

LOL, and what the hell did it say? We need answers!
Title: Re: I am the ultimate industry insider, AMA
Post by: Ronald Wilson Reagan on September 13, 2017, 12:00:17 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
what is Nora's cup size?
[close]
Reported
[close]
[close]
Get it?! Cool guys are weird and creepy, and people who don't like creeps are uptight nerds!
[close]


woah he's back...and perhaps not getting the "reported" thing that happened during his absence
[close]

Nobody is more easily triggered than this questionable character.
[close]
"
At least I don't obviously focus accounts and start new ones. That really comes off as triggered and pathetic. "Nobody likes me...it must be my username, if I start over with a new account nobody will know that I got hated off the site before!" Except its REALLY obvious...
[close]


hahah. Your explosive temperament is way too easy to draw out.

https://en.wikipedia.org/wiki/Intermittent_explosive_disorder
Really? Did I have a meltdown, focus my account, and start a new one based on the assumption that a new username would make people like me? Or did I just calmly type 4 sentences that captured you perfectly? Because I'm pretty sure it was the second one, dork.
Title: Re: I am the ultimate industry insider, AMA
Post by: Ronald Wilson Reagan on September 13, 2017, 12:03:09 AM
Expand Quote
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
[close]
Yeah Trump sucks and all, but he didn't invent the alt-left term. The alt-left is the super far left just like the alt-right is the super far right. Both of these groups tend to resort to intimidation and violence to push their ideologies. And both of them suck.
no, alt-right isn't extreme right, its a different view of right wing ideology centered around nationalism rather than economic issues. The "alt-left" was a made up term used by Trump to imply that there is an equivalent to the alt-right on the left.
Title: Re: I am the ultimate industry insider, AMA
Post by: Cherb on September 13, 2017, 12:57:48 AM
Expand Quote
Expand Quote
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
[close]
Yeah Trump sucks and all, but he didn't invent the alt-left term. The alt-left is the super far left just like the alt-right is the super far right. Both of these groups tend to resort to intimidation and violence to push their ideologies. And both of them suck.
[close]
no, alt-right isn't extreme right, its a different view of right wing ideology centered around nationalism rather than economic issues. The "alt-left" was a made up term used by Trump to imply that there is an equivalent to the alt-right on the left.
Okay and if nationalism and segregation isn't extreme I don't know what is. . . Alt right was only a made up term until it gained traction. But Trump wasn't the one who coined the term.

Enough with the politics. I'm an idiot for getting sucked into talking politics on slap of all places.
Title: Re: I am the ultimate industry insider, AMA
Post by: Gray Imp Sausage Metal on September 13, 2017, 01:14:09 AM
oh ffs, get back on topic, this was supposed to be a light-hearted thread not some bullshit 5 page argument with gipper
Title: Re: I am the ultimate industry insider, AMA
Post by: Vert Reynolds on September 13, 2017, 01:23:44 AM
Kareeem wouldn't ride Bearing shielded Nutz .....So why Question the functionality of them? Even if they did work, It's Whack.
SOmetimes you just have to Tuff it out...Fashion Never Function ;-)

WHat WOuld Kareem Do?  I base my Sk8 lyfe off that

WWKD
Title: Re: I am the ultimate industry insider, AMA
Post by: Grind King Rims on September 13, 2017, 02:23:25 AM
What did Rodney whisper it Twuan's ear?
"Psst! ...You tryna catch my fade nigga? We can square up no problem, it's whatever, whatever, doo doo.
Title: Re: I am the ultimate industry insider, AMA
Post by: colt cannon lunchbox on September 13, 2017, 02:59:24 AM
What did Rodney whisper it Twuan's ear?

Is the funky dank really that great?
Title: Re: I am the ultimate industry insider, AMA
Post by: Jerkstore on September 13, 2017, 03:01:43 AM
Expand Quote
What did Rodney whisper it Twuan's ear?
[close]
"Psst! ...You tryna catch my fade nigga? We can square up no problem, it's whatever, whatever, doo doo.

you know he told him to keep his upper body relaxed or something while doing tricks

pretty sure it's been said somewhere here before
Title: Re: I am the ultimate industry insider, AMA
Post by: Big Baby Jesus on September 13, 2017, 06:15:53 AM
Expand Quote
Who is the new 917 pro?
[close]
When will we get a Nik Stain Max Palmer pro board???
Title: Re: I am the ultimate industry insider, AMA
Post by: micky682 on September 13, 2017, 06:17:50 AM
oh ffs, get back on topic, this was supposed to be a light-hearted thread not some bullshit 5 page argument with gipper
Title: Re: I am the ultimate industry insider, AMA
Post by: SodaJerk on September 13, 2017, 06:57:40 AM
Tell me what you know about industry dude "Adrian Cramp" aka Crampy
That's super random. Be specific and I might be able to help you out within reason.
Title: Re: I am the ultimate industry insider, AMA
Post by: sms_b on September 13, 2017, 07:10:20 AM
What's are the length/girth measurements of everyone's penises?

Girth: (--------------------------------------------------------------------------------------------------------------------------------------------------------)

Length: <-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------->

Legend: Each unit (-) equals ten metric feet.
Title: Re: I am the ultimate industry insider, AMA
Post by: QueeferMadness on September 13, 2017, 07:22:47 AM
Why/how did think go outta business? They had the best cheap boards good shape and Adrian Williams fuckin kills it
Title: Re: I am the ultimate industry insider, AMA
Post by: calvinsdream on September 13, 2017, 07:40:35 AM
Expand Quote
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
[close]
Yeah Trump sucks and all, but he didn't invent the alt-left term. The alt-left is the super far left just like the alt-right is the super far right. Both of these groups tend to resort to intimidation and violence to push their ideologies. And both of them suck.

Yeahhhh, not so much. Richard Spencer came up with the phrase alt-right phrase to name a movement. Alt-left is just a buzzword for snowflakes, antifa, pussies, or whatever liberals are getting called today.

"According to the Washington Post, the term ?alt-left? was first used on conspiracy theory-pushing websites like WorldNetDaily. As early as August 2016, that site published an op-ed entitled ?Let?s look at the alt left? that argued that the Democratic party was as racist as the right, and that it should be considered extreme because it welcomed into its ranks communists and socialists.

By December 2016, Fox News was also using the term ?alt-left,? but in a different way, to argue that the mainstream left was out of step with the majority of Americans. "

http://www.pbs.org/newshour/rundown/term-alt-left-came/ (http://www.pbs.org/newshour/rundown/term-alt-left-came/)
Title: Re: I am the ultimate industry insider, AMA
Post by: QueeferMadness on September 13, 2017, 07:44:22 AM
Expand Quote
Expand Quote
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
[close]
Yeah Trump sucks and all, but he didn't invent the alt-left term. The alt-left is the super far left just like the alt-right is the super far right. Both of these groups tend to resort to intimidation and violence to push their ideologies. And both of them suck.
[close]

Yeahhhh, not so much. Richard Spencer came up with the phrase alt-right phrase to name a movement. Alt-left is just a buzzword for snowflakes, antifa, pussies, or whatever liberals are getting called today.

"According to the Washington Post, the term ?alt-left? was first used on conspiracy theory-pushing websites like WorldNetDaily. As early as August 2016, that site published an op-ed entitled ?Let?s look at the alt left? that argued that the Democratic party was as racist as the right, and that it should be considered extreme because it welcomed into its ranks communists and socialists.

By December 2016, Fox News was also using the term ?alt-left,? but in a different way, to argue that the mainstream left was out of step with the majority of Americans. "

http://www.pbs.org/newshour/rundown/term-alt-left-came/ (http://www.pbs.org/newshour/rundown/term-alt-left-came/)

Mods, if we go down this road again somebody else needs to get banned, I'm lonely here I'm my exile.
Title: Re: I am the ultimate industry insider, AMA
Post by: bo golden on September 13, 2017, 08:02:14 AM
Expand Quote
With regards to crailtap why do they so often jump on trends late when realistically they should focus on what makes them popular and provide more of the same ? The whole flowers/women thing was really contrived.

How much intimidation exists ? Obviously Mickey Reyes stuff has been fairly well documented but is there any other examples ?

Have Dwindle bought into Revive ?

Does Nike have a controlling factor of Skate Mental

Why didn't Al Boglio and Jeremie Daclain go ahead with bonjour skateboards

Is Pontus a sex fiend ?

How is Clark Hassler still Pro ?

 
[close]

That's too much inside information! Like I said, crailtap doesn't operate like a traditional skate company anymore. If they stick around for a few more years they'll be forced to go back to what fans want.

Revive is independent, nike is pulling back their SB budget. Revive ironically has a few sponsors that don't want their name attached to the brand (we'll give you product, but don't mention our name). Revive/braille makes money, but its built on a house of cards!



Revive backed by Netflix confirmed. 
Title: Re: I am the ultimate industry insider, AMA
Post by: Cuban_Lynx on September 13, 2017, 08:19:42 AM
Expand Quote
What's are the length/girth measurements of everyone's penises?
[close]

Girth: (--------------------------------------------------------------------------------------------------------------------------------------------------------)

Length: <-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------->

Legend: Each unit (-) equals ten metric feet.
(https://i.imgur.com/5elbpjU.gif)
Title: Re: I am the ultimate industry insider, AMA
Post by: sfa on September 13, 2017, 09:51:25 AM
This supposed industry insider isn't answering very many questions?

Why hasn't Cons signed a female skater to their roster like ever other big shoe brand getting ready for the Olympics?

Where's Dyrdek been? (other than getting ready for the Olympics)

Title: Re: I am the ultimate industry insider, AMA
Post by: Buck Russell on September 13, 2017, 10:54:01 AM
How do companies find clothing and board manufacturers?
If I were to try and create a company and make boards through bbs, generator, or ps,
how do I go about contacting the manufacturers? Who would I contact to make clothes?
It may seem unrealistic to start a brand or company in skateboarding and expect to
Do well with all these brands popping up. I just want to know out of curiosity.


this ones easy and a big reason the skate market sucks: everyone just uses what everyone else uses. finding factories is kind of hard you gotta go overseas and meet people and inspect etc to find your own.  other option is there's sort of show rooms here basically just middle men that have their own set of factories that you go thru.

if you have $10k you can start a company no problemo but likely wont be able to sell it.
Title: Re: I am the ultimate industry insider, AMA
Post by: TheDraught on September 13, 2017, 10:58:35 AM
Who are the biggest drunks / junkies in skateboarding right now, OP?
Title: Re: I am the ultimate industry insider, AMA
Post by: alraunen on September 13, 2017, 11:18:30 AM
Is true that the big shoe corps are putting money on small board brands like Polar, Magenta, 917... To win visibility and destroy the core brands?
Title: Re: I am the ultimate industry insider, AMA
Post by: Daniel on September 13, 2017, 11:50:14 AM
Expand Quote
How do companies find clothing and board manufacturers?
If I were to try and create a company and make boards through bbs, generator, or ps,
how do I go about contacting the manufacturers? Who would I contact to make clothes?
It may seem unrealistic to start a brand or company in skateboarding and expect to
Do well with all these brands popping up. I just want to know out of curiosity.

[close]

this ones easy and a big reason the skate market sucks: everyone just uses what everyone else uses. finding factories is kind of hard you gotta go overseas and meet people and inspect etc to find your own.  other option is there's sort of show rooms here basically just middle men that have their own set of factories that you go thru.

if you have $10k you can start a company no problemo but likely wont be able to sell it.

Hell yeah, I appreciate the feedback.
Yeah it seems super tough to start one now in this market.
Title: Re: I am the ultimate industry insider, AMA
Post by: Tyroneshoelaces on September 13, 2017, 12:11:45 PM
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.

looolll such a classic Gipper answer to a joke question, I love it.  Anytime you get called/insinuated to be a moron/idiot by Gip it was a good day.  Nice to have you back posting.   
Title: Re: I am the ultimate industry insider, AMA
Post by: TheDraught on September 13, 2017, 12:56:57 PM
Expand Quote
Expand Quote
How many times has Gipper donned the black to go hang out with his Alt Left Antifa suburb white friends?   Is Gipper going to tell me how to feel about my own race?
[close]
Nobody is telling you how to feel about anybody, though apparently you make racial assumptions and like to repeat Donald Trump's bullshit without thinking about it. Alt-Left is a Trump invention. Be smarter than a Trump moron, most of the country are.
[close]

looolll such a classic Gipper answer to a joke question, I love it.  Anytime you get called/insinuated to be a moron/idiot by Gip it was a good day.  Nice to have you back posting.   

This is how I imagine The Gipper:
(https://lh5.googleusercontent.com/-6tzLXh9wmIk/UBWiHqj5o6I/AAAAAAAAAHE/t5_0I1nF5JA/w800-h800/2%2BANGRY%2BMAN%2BLaptop%2BScreen%2Band%2BKeyboard%2BRepairs.jpg)
Title: Re: I am the ultimate industry insider, AMA
Post by: 7 year old on September 13, 2017, 01:26:25 PM
Will I ever find true love?   :(
Title: Re: I am the ultimate industry insider, AMA
Post by: Buck Russell on September 13, 2017, 01:48:20 PM
Is true that the big shoe corps are putting money on small board brands like Polar, Magenta, 917... To win visibility and destroy the core brands?
wasn't true w/ Skate Mental isn't true for new small brands. they don't put any money into any of this but do pay riders, fund trips, finance filming n stuff so brands don't need budget for much besides production.
Title: Re: I am the ultimate industry insider, AMA
Post by: augor on September 13, 2017, 03:54:09 PM
Expand Quote
Well if your a industry insider, whats inside of the industry then?
[close]

Rocco watching porn while riding a unicorn wearing only a pair of Sheeps Dukes
Title: Re: I am the ultimate industry insider, AMA
Post by: AllBranFlakes69 on September 13, 2017, 04:31:44 PM
Expand Quote
What's are the length/girth measurements of everyone's penises?
[close]

Girth: (--------------------------------------------------------------------------------------------------------------------------------------------------------)

Length: <-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------->

Legend: Each unit (-) equals ten metric feet.

Lol what the frig is a metric foot?
Title: Re: I am the ultimate industry insider, AMA
Post by: sms_b on September 13, 2017, 06:27:47 PM
Expand Quote
Expand Quote
What's are the length/girth measurements of everyone's penises?
[close]

Girth: (--------------------------------------------------------------------------------------------------------------------------------------------------------)

Length: <-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------->

Legend: Each unit (-) equals ten metric feet.
[close]

Lol what the frig is a metric foot?

It's a standard of measurement intended for measuring extreme manhood. If a Berra is a unit of measurement that measures the saturation point of a tampon, then the Metric Foot measures a dick so large it defies both reason and comprehension.
Title: Re: I am the ultimate industry insider, AMA
Post by: Pauly Walnuts on September 13, 2017, 06:57:22 PM
Will I ever find true love?   :(
true love will find you in the end :)
Title: Re: I am the ultimate industry insider, AMA
Post by: venture5.8 on September 13, 2017, 07:41:46 PM
Expand Quote
Will I ever find true love?   :(
[close]
true love will find you in the end :)

only after you go through the love wheel?
Title: Re: I am the ultimate industry insider, AMA
Post by: Joust Ostrich on September 13, 2017, 07:48:39 PM
Expand Quote
Expand Quote
Expand Quote
What's are the length/girth measurements of everyone's penises?
[close]

Girth: (--------------------------------------------------------------------------------------------------------------------------------------------------------)

Length: <-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------->

Legend: Each unit (-) equals ten metric feet.
[close]

Lol what the frig is a metric foot?
[close]

It's a standard of measurement intended for measuring extreme manhood. If a Berra is a unit of measurement that measures the saturation point of a tampon, then the Metric Foot measures a dick so large it defies both reason and comprehension.
Thanks for breaking that down into words us Slapiens can understand.  +1
Title: Re: I am the ultimate industry insider, AMA
Post by: Ghost Face on September 13, 2017, 11:22:29 PM
Is it true that every time someone writes "off" the industry gets a notification?
Title: Re: I am the ultimate industry insider, AMA
Post by: Molte on September 14, 2017, 12:26:41 AM
Will I ever find true love?   :(
If you didn't the day you started skateboarding, you're screwed !!
Title: Re: I am the ultimate industry insider, AMA
Post by: 7 year old on September 14, 2017, 11:28:46 AM
Expand Quote
Will I ever find true love?   :(
[close]
true love will find you in the end :)
  8)
Title: Re: I am the ultimate industry insider, AMA
Post by: Allen. on September 14, 2017, 11:40:57 AM
Is it true that every time someone writes "off" the industry gets a notification?

No. This shit started in 06 as an inside joke when someone claimed Gino was 'of choclate.'
Title: Re: I am the ultimate industry insider, AMA
Post by: happenstance on September 14, 2017, 12:01:16 PM
Expand Quote
Is it true that every time someone writes "off" the industry gets a notification?
[close]

No. This shit started in 06 as an inside joke when someone claimed Gino was 'of choclate.'
I have no idea what you are talking about. When someone is of a company, they are of, and it can be a real hardship. I don't see what's funny about that. These people have families to feed.
Title: Re: I am the ultimate industry insider, AMA
Post by: n0torious on September 14, 2017, 12:18:58 PM
I have no idea what you are talking about. When someone is of a company, they are of, and it can be a real hardship. I don't see what's funny about that. These people have families to feed.

Easy now. Don't go flying of the handle.
Title: Re: I am the ultimate industry insider, AMA
Post by: TheDraught on September 14, 2017, 01:51:32 PM
OP doesnt deliver.
Title: Re: I am the ultimate industry insider, AMA
Post by: the canadian suit on September 14, 2017, 02:34:54 PM
Expand Quote
Expand Quote
Will I ever find true love?   :(
[close]
true love will find you in the end :)
[close]
  8)
you'll find out just who is your friend :)
Title: Re: I am the ultimate industry insider, AMA
Post by: Gray Imp Sausage Metal on September 14, 2017, 05:49:24 PM
OP doesnt deliver.
 ikr?
Title: Re: I am the ultimate industry insider, AMA
Post by: Allen. on September 14, 2017, 06:17:30 PM
Expand Quote
Expand Quote
Is it true that every time someone writes "off" the industry gets a notification?
[close]

No. This shit started in 06 as an inside joke when someone claimed Gino was 'of choclate.'
[close]
I have no idea what you are talking about. When someone is of a company, they are of, and it can be a real hardship. I don't see what's funny about that. These people have families to feed.

When you're right, you're right.
Title: Re: I am the ultimate industry insider, AMA
Post by: shark tits on September 14, 2017, 06:23:58 PM
Expand Quote
Expand Quote
Expand Quote
Will I ever find true love?   :(
[close]
true love will find you in the end :)
[close]
  8)
[close]
you'll find out just who is your friend :)
don't be sad i know you will  :)
Title: Re: I am the ultimate industry insider, AMA
Post by: Lloyd on September 15, 2017, 11:32:32 AM
What happened to the replies, loads of questions still to be answered.
Title: Re: I am the ultimate industry insider, AMA
Post by: ducky darnsworth on September 15, 2017, 11:35:15 AM
i am a industry outsider and will answer the hard hitting softball questions
Title: Re: I am the ultimate industry insider, AMA
Post by: happenstance on September 15, 2017, 11:36:22 AM
What happened to the replies, loads of questions still to be answered.
He forgot his keys and accidentally locked himself out of the industry.
Title: Re: I am the ultimate industry insider, AMA
Post by: shit_for_brains on September 15, 2017, 11:42:47 AM
Is saying you're an industry insider really all it takes to get you guys going?
Title: Re: I am the ultimate industry insider, AMA
Post by: Watson on September 15, 2017, 12:24:43 PM
The industry darkmen who pressured High Speed to install the of-filter got to Abberdash and silenced him with promises of Tate-proportioned boxes.
Title: Re: I am the ultimate industry insider, AMA
Post by: Tracer on September 15, 2017, 12:43:06 PM
Can i get a box?

(http://scontent.cdninstagram.com/t51.2885-15/s640x640/e15/17075982_1937620929801776_8374555068870950912_n.jpg)
Title: Re: I am the ultimate industry insider, AMA
Post by: Maggie on September 15, 2017, 12:49:21 PM
tmz.com
Title: Re: I am the ultimate industry insider, AMA
Post by: Casey Jones on September 15, 2017, 02:27:28 PM
confessions of a darkman
Title: Re: I am the ultimate industry insider, AMA
Post by: Matthew_James on September 15, 2017, 02:40:02 PM
When did Slap become Reddit?

Also, did you know that North Korea actually has prefab skateparks? You won't find one skateboard, it's just a city full of rollerbladers. It's Gipper's socialist utopia come to life ❤️


How come you only answer questions that can be answered exclusively with common sense and info from an intro to business management course from a local junior college?
Title: Re: I am the ultimate industry insider, AMA
Post by: GAY on September 15, 2017, 02:45:08 PM
Every time I see this thread name I think of this song:

Dimitri From Paris - Une Very Stylish Fille (http://www.youtube.com/watch?v=aWdr-ohVmOc#)
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 15, 2017, 04:46:33 PM
When did Slap become Reddit?

Also, did you know that North Korea actually has prefab skateparks? You won't find one skateboard, it's just a city full of rollerbladers. It's Gipper's socialist utopia come to life ❤️


How come you only answer questions that can be answered exclusively with common sense and info from an intro to business management course from a local junior college?

That's because I have common sense, and I've gone to a community college (and am now slacking my way through a nice university too).

It looks like my inside insights are just too heavy and damaging to skate culture. :'(
Title: Re: I am the ultimate industry insider, AMA
Post by: el chino on September 15, 2017, 05:21:40 PM
Why is atiba respected?
Title: Re: I am the ultimate industry insider, AMA
Post by: billyerlife on September 15, 2017, 06:36:35 PM
Wow y'all really just fell into that. Let me try; I am a member of a secret society of world controlling purple haired lizard people. Ask me anything about anything and I will give you vague answers to very few of your questions.
Title: Re: I am the ultimate industry insider, AMA
Post by: ducky darnsworth on September 15, 2017, 07:26:03 PM
Why is atiba respected?

because he has a twin brother, so before it was common knowledge people thought he could actually be at two places at once, and people fear/respect that.
Title: Re: I am the ultimate industry insider, AMA
Post by: layzieyez on September 15, 2017, 08:28:37 PM
Every time I see this thread name I think of this song:

Dimitri From Paris - Une Very Stylish Fille (http://www.youtube.com/watch?v=aWdr-ohVmOc#)
I was always big on this one from that album
Dimitri from Paris - Love Love Mode long version (http://www.youtube.com/watch?v=zYT8whXO_sk#)
Title: Re: I am the ultimate industry insider, AMA
Post by: Atiba Applebum on September 16, 2017, 08:59:27 AM
Is saying you're an industry insider really all it takes to get you guys going?

I'm convinced this is the Euro TM based off their use of "cheque"
Title: Re: I am the ultimate industry insider, AMA
Post by: MexicanSpaniard on September 16, 2017, 10:18:00 AM
thanks for the Dimitri from Paris links guys, liking it so far
Title: Re: I am the ultimate industry insider, AMA
Post by: Guwop on September 16, 2017, 09:37:44 PM
(https://image.ibb.co/b54tG5/roger.jpg)
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 17, 2017, 05:46:37 PM
Did elijah to FA already get mentioned on SLAP yet

Mr. Berle is currently entertaining 3 different offers, one from FA.. one from Real.. And one from..
Title: Re: I am the ultimate industry insider, AMA
Post by: Cherb on September 17, 2017, 06:18:48 PM
Expand Quote
Did elijah to FA already get mentioned on SLAP yet
[close]

Mr. Berle is currently entertaining 3 different offers, one from FA.. one from Real.. And one from..
Is this real life? I know that you're just trolling us saying you're an industry insider but this rumor is just too juicy for me to ignore. Hopefully he wouldn't go to FA. But if he went to Real that would be lit AF. What's the third one that you're making up. YOU HAVE TO FINISH YOUR RUMORS BRO.
Title: Re: I am the ultimate industry insider, AMA
Post by: pabloalvarado on September 17, 2017, 06:41:58 PM
Expand Quote
Expand Quote
Did elijah to FA already get mentioned on SLAP yet
[close]

Mr. Berle is currently entertaining 3 different offers, one from FA.. one from Real.. And one from..
[close]
Is this real life? I know that you're just trolling us saying you're an industry insider but this rumor is just too juicy for me to ignore. Hopefully he wouldn't go to FA. But if he went to Real that would be lit AF. What's the third one that you're making up. YOU HAVE TO FINISH YOUR RUMORS BRO.

Krooked, of course.
Title: Re: I am the ultimate industry insider, AMA
Post by: Jonny Utah on September 17, 2017, 06:50:18 PM
will Tom Schaar join the Blood Wizards?
Title: Re: I am the ultimate industry insider, AMA
Post by: Cherb on September 17, 2017, 06:53:24 PM
Expand Quote
Expand Quote
Expand Quote
Did elijah to FA already get mentioned on SLAP yet
[close]

Mr. Berle is currently entertaining 3 different offers, one from FA.. one from Real.. And one from..
[close]
Is this real life? I know that you're just trolling us saying you're an industry insider but this rumor is just too juicy for me to ignore. Hopefully he wouldn't go to FA. But if he went to Real that would be lit AF. What's the third one that you're making up. YOU HAVE TO FINISH YOUR RUMORS BRO.
[close]

Krooked, of course.
That would be weird lol.

will Tom Schaar join the Blood Wizards?
That would be hilarious yet awesome.
Title: Re: I am the ultimate industry insider, AMA
Post by: Guwop on September 17, 2017, 09:21:31 PM
Expand Quote
Expand Quote
Expand Quote
Did elijah to FA already get mentioned on SLAP yet
[close]

Mr. Berle is currently entertaining 3 different offers, one from FA.. one from Real.. And one from..
[close]
Is this real life? I know that you're just trolling us saying you're an industry insider but this rumor is just too juicy for me to ignore. Hopefully he wouldn't go to FA. But if he went to Real that would be lit AF. What's the third one that you're making up. YOU HAVE TO FINISH YOUR RUMORS BRO.
[close]

Krooked, of course.
(http://68.media.tumblr.com/c6588acb0593712b00095b842e1d182b/tumblr_mysv7iG6LJ1s593tro1_1280.jpg)

confirmed!  :o
Title: Re: I am the ultimate industry insider, AMA
Post by: JusticeAbberdash on September 17, 2017, 09:47:54 PM
Lizard king stopped using indys cause his ankles are all fucked, he rides thunder for life because thunder makes skating easier.
Title: Re: I am the ultimate industry insider, AMA
Post by: Molte on September 18, 2017, 01:36:22 AM
Lizard king stopped using indys cause his ankles are all fucked, he rides thunder for life because thunder makes skating easier.
That's a horrible statement
Title: Re: I am the ultimate industry insider, AMA
Post by: Turtle Boy on September 18, 2017, 02:21:07 AM
Lizard king stopped using indys cause his ankles are all fucked, he rides thunder for life because thunder makes skating easier.
To be honest it worked for me.
Title: Re: I am the ultimate industry insider, AMA
Post by: Esquivel on September 18, 2017, 03:40:04 AM
Expand Quote
Lizard king stopped using indys cause his ankles are all fucked, he rides thunder for life because thunder makes skating easier.
[close]
To be honest it worked for me.

It is common knowledge that thunders make nose/tailslides happen much easier :)
Title: Re: I am the ultimate industry insider, AMA
Post by: Atiba Applebum on September 18, 2017, 04:54:28 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Did elijah to FA already get mentioned on SLAP yet
[close]

Mr. Berle is currently entertaining 3 different offers, one from FA.. one from Real.. And one from..
[close]
Is this real life? I know that you're just trolling us saying you're an industry insider but this rumor is just too juicy for me to ignore. Hopefully he wouldn't go to FA. But if he went to Real that would be lit AF. What's the third one that you're making up. YOU HAVE TO FINISH YOUR RUMORS BRO.
[close]

Krooked, of course.
[close]
(http://68.media.tumblr.com/c6588acb0593712b00095b842e1d182b/tumblr_mysv7iG6LJ1s593tro1_1280.jpg)

confirmed!  :o

Real hasn't added an established skater since Gonz

Hockey is more suited to Elijah's image

Not one fake mention of Anti Hero?
Title: Re: I am the ultimate industry insider, AMA
Post by: other2 on September 18, 2017, 10:40:40 PM
its the 18

not Krooked

nor Real

Raven is next
Title: Re: I am the ultimate industry insider, AMA
Post by: rob on September 18, 2017, 10:48:58 PM
Lizard king stopped using indys cause his ankles are all fucked, he rides thunder for life because thunder makes skating easier.

Cause they're the perfect mid height so you don't have to put in as much effort to Pop and jump for everything
Title: Re: I am the ultimate industry insider, AMA
Post by: FrenchFriedClownFingers on September 18, 2017, 11:36:29 PM
i am the ultimate anal inside, please ask me anything about thee anal
Title: Re: I am the ultimate industry insider, AMA
Post by: Preda on June 29, 2021, 01:43:24 AM
Hahaha, I must say there are some great lines on this topic. The best way to detect an insider threat is to monitor user behavior and generate alerts when anomalous activity is spotted. Unfortunately, native auditing is not an appropriate method to do this, as it lacks the reporting capabilities and is in general too much of a hands-on method. There are five main types of insider activity: unauthorized disclosure of sensitive information, process corruption, facilitation of third-party access to an organization's assets, physical sabotage, and electronic or IT sabotage. I work with manufacturing factoring (https://factorforyou.com/manufacturing-factoring/) companies who provide help for factoring companies to grow their businesses.
Title: Re: I am the ultimate industry insider, AMA
Post by: dorothyd on June 29, 2021, 03:03:32 AM
I see no reason why would an industry insider post on a forum.
Title: Re: I am the ultimate industry insider, AMA
Post by: Dalton on June 29, 2021, 03:12:28 AM
What's the status of Lakai? It seems they don't update their team.
Title: Re: I am the ultimate industry insider, AMA
Post by: arrbee on June 29, 2021, 04:53:39 AM
I see no reason why would an industry insider post on a forum.

The same reason celebrity agents/managers leak stories to TMZ
Title: Re: I am the ultimate industry insider, AMA
Post by: flippy lippy on June 29, 2021, 05:58:37 AM
OP left to get cigs and isn't coming back
Title: Re: I am the ultimate industry insider, AMA
Post by: jerrygurneyscream on June 29, 2021, 06:21:37 AM
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
Title: Re: I am the ultimate industry insider, AMA
Post by: Jean-Ralphio Zaperstein on June 29, 2021, 06:25:00 AM
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA

But how did KID write on that water tower ??
Title: Re: I am the ultimate industry insider, AMA
Post by: cky enthusiast on June 29, 2021, 06:26:27 AM
(https://i.redd.it/h0vskretzpj21.jpg)
Title: Re: I am the ultimate industry insider, AMA
Post by: jerrygurneyscream on June 29, 2021, 06:26:46 AM
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??

Hey man, some secrets are better off untold, Some would say he got so high on his baltimore laced k2 that he just floated right up there...
Title: Re: I am the ultimate industry insider, AMA
Post by: Frank on June 29, 2021, 06:29:13 AM
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??

i don't know but i want to see drones used to do graffiti in unlikely places. that would be sick. i'd start again, too. i'd just sit in my house playing some sort of video game for all i know. who will be the first writer to do drone bombings? not real bombings of course, that shit sucks.
Title: Re: I am the ultimate industry insider, AMA
Post by: jerrygurneyscream on June 29, 2021, 06:31:10 AM
Expand Quote
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??
[close]

i don't know but i want to see drones used to do graffiti in unlikely places. that would be sick. i'd start again, too. i'd just sit in my house playing some sort of video game for all i know. who will be the first writer to do drone bombings? not real bombings of course, that shit sucks.

https://www.youtube.com/watch?v=We12p6yvNW0
Title: Re: I am the ultimate industry insider, AMA
Post by: Hinna on June 29, 2021, 06:32:35 AM
gane texas roller kings
Title: Re: I am the ultimate industry insider, AMA
Post by: Frank on June 29, 2021, 06:33:21 AM
Expand Quote
Expand Quote
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??
[close]

i don't know but i want to see drones used to do graffiti in unlikely places. that would be sick. i'd start again, too. i'd just sit in my house playing some sort of video game for all i know. who will be the first writer to do drone bombings? not real bombings of course, that shit sucks.
[close]

https://www.youtube.com/watch?v=We12p6yvNW0

damn, i should've known everything's been done at this point.
Title: Re: I am the ultimate industry insider, AMA
Post by: cky enthusiast on June 29, 2021, 06:37:28 AM
she’s def taller than u
Title: Re: I am the ultimate industry insider, AMA
Post by: donkey on June 29, 2021, 06:47:02 AM
lets make every thread on the front page a discussion on how the hell kid pk got on the water tower
Title: Re: I am the ultimate industry insider, AMA
Post by: Low standards on June 29, 2021, 07:41:06 AM
Tony Hawks eyebrows
Title: Re: I am the ultimate industry insider, AMA
Post by: lemonchicken91 on June 29, 2021, 09:57:29 AM
who is the hottest girl writer

utah, texas, merlot, itse?

or CLAW
Title: Re: I am the ultimate industry insider, AMA
Post by: conqueso on June 29, 2021, 10:13:01 AM
didn't even get flew'd out by strobeck tho
Title: Re: I am the ultimate industry insider, AMA
Post by: cky enthusiast on June 29, 2021, 10:17:33 AM
who is the hottest girl writer

utah, texas, merlot, itse?

or CLAW

abra
Title: Re: I am the ultimate industry insider, AMA
Post by: donkey on June 29, 2021, 10:42:44 AM
graff dudes when thyey see a girl writer: *eyes pop out of head* AWOOOGA... M'lady, care to take my hand? Shall we go smoke sherm on this factory rooftop while we practice our handstyles?
Title: Re: I am the ultimate industry insider, AMA
Post by: cky enthusiast on June 29, 2021, 10:44:08 AM
my eyes pop out of my skull and my tongue rolls out and then snaps back into my head
Title: Re: I am the ultimate industry insider, AMA
Post by: Sightunseen on June 29, 2021, 11:05:56 AM
(https://i.redd.it/h0vskretzpj21.jpg)

So good.
Title: Re: I am the ultimate industry insider, AMA
Post by: jerrygurneyscream on June 29, 2021, 11:07:50 AM
graff dudes when thyey see a girl writer: *eyes pop out of head* AWOOOGA... M'lady, care to take my hand? Shall we go do whipits on this factory rooftop while we practice our handstyles?

Fixed that for ya
Title: Re: I am the ultimate industry insider, AMA
Post by: UselessAsshole on June 29, 2021, 11:21:30 AM
my eyes pop out of my skull and my tongue rolls out and then snaps back into my head

 ;D

(https://i.gifer.com/KZT.gif)
Title: Re: I am the ultimate industry insider, AMA
Post by: Miserable Old Sack of Shit on June 29, 2021, 10:06:46 PM
Whole lotta dry snitching in here.
Title: Re: I am the ultimate industry insider, AMA
Post by: Hinna on June 30, 2021, 04:09:29 AM
Whole lotta dry snitching in here.
these people are famous and have ig and some post pretty personal stuff. plus theyve been popped before. not saying its helping their own cause or anything but ya dude what is even style wars these days. dont get mad at someone irl for letting out the huge secret that utahs a chick because thatd be embarrassing
Title: Re: I am the ultimate industry insider, AMA
Post by: Craig Lutzka on June 30, 2021, 11:08:17 AM
Expand Quote
who is the hottest girl writer

utah, texas, merlot, itse?

or CLAW
[close]

abra
(https://spraydaily.com/wp-content/uploads/2014/04/Thorfine_Flash-1_07_Abra.jpg)
Title: Re: I am the ultimate industry insider, AMA
Post by: Sightunseen on June 30, 2021, 11:30:34 AM
Expand Quote
Expand Quote
who is the hottest girl writer

utah, texas, merlot, itse?

or CLAW
[close]

abra
[close]
(https://spraydaily.com/wp-content/uploads/2014/04/Thorfine_Flash-1_07_Abra.jpg)

Damn, I missed this discussion

Joji and Mia are dope
Title: Re: I am the ultimate industry insider, AMA
Post by: ok boomer on June 30, 2021, 11:42:50 AM
http://www.youtube.com/watch?v=Pn0T0EOwUw8
Title: Re: I am the ultimate industry insider, AMA
Post by: Pete on June 30, 2021, 01:14:20 PM
Nah Utah is sucha
 fine whitegirl back in 09 when we worked together. Skinny as hell with a fat ass.


Free max b
Title: Re: I am the ultimate industry insider, AMA
Post by: matty_c on June 30, 2021, 01:19:36 PM
Expand Quote
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??
[close]

i don't know but i want to see drones used to do graffiti in unlikely places. that would be sick. i'd start again, too. i'd just sit in my house playing some sort of video game for all i know. who will be the first writer to do drone bombings? not real bombings of course, that shit sucks.

Could he have rappelled sort of thing? Like abseiling?

I don’t know much about drones but I think it would be difficult to carry the paint and whatever pressurised container you had it in
I mean like the weight? You’d need a sick drone
Title: Re: I am the ultimate industry insider, AMA
Post by: matty_c on June 30, 2021, 01:21:27 PM
Expand Quote
(https://i.redd.it/h0vskretzpj21.jpg)
[close]

So good.

Yeah oath
Never seen that before only the one colour usual sort of stuff, that photo’s crazy
Title: Re: I am the ultimate industry insider, AMA
Post by: donkey on June 30, 2021, 01:27:17 PM
Expand Quote
Expand Quote
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??
[close]

i don't know but i want to see drones used to do graffiti in unlikely places. that would be sick. i'd start again, too. i'd just sit in my house playing some sort of video game for all i know. who will be the first writer to do drone bombings? not real bombings of course, that shit sucks.
[close]

Could he have rappelled sort of thing? Like abseiling?

I don’t know much about drones but I think it would be difficult to carry the paint and whatever pressurised container you had it in
I mean like the weight? You’d need a sick drone
KATSU, linked in this thread with a video of one of his more famous works, often works with AI and drones in his artwork. the most notable and my favorite techniques of his is how he uses an AI system to paint faces using a drone. its on his insta if you want to check it out, it's very cool and hes always pushing boundaries
Title: Re: I am the ultimate industry insider, AMA
Post by: Sightunseen on June 30, 2021, 03:28:59 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
I got news for you, industry insider, Berle is on FA, nickel boards are being screened over, we got nick merlino of foundation and Chadd sinclair himself of punisher, Lotties is closed, and the grateful dead are never coming back into style. AMA
[close]

But how did KID write on that water tower ??
[close]

i don't know but i want to see drones used to do graffiti in unlikely places. that would be sick. i'd start again, too. i'd just sit in my house playing some sort of video game for all i know. who will be the first writer to do drone bombings? not real bombings of course, that shit sucks.
[close]

Could he have rappelled sort of thing? Like abseiling?

I don’t know much about drones but I think it would be difficult to carry the paint and whatever pressurised container you had it in
I mean like the weight? You’d need a sick drone
[close]
KATSU, linked in this thread with a video of one of his more famous works, often works with AI and drones in his artwork. the most notable and my favorite techniques of his is how he uses an AI system to paint faces using a drone. its on his insta if you want to check it out, it's very cool and hes always pushing boundaries

Yeah, katsu is dope. Between the drone work and extinguisher tags he’s a goat
Title: Re: I am the ultimate industry insider, AMA
Post by: sometimeperhaps on June 30, 2021, 03:39:54 PM
Nah Utah is sucha
 fine whitegirl back in 09 when we worked together. Skinny as hell with a fat ass.


Free max b

total babe.

(https://i.ibb.co/NyFQTqw/utah.jpg) (https://imgbb.com/)
Title: Re: I am the ultimate industry insider, AMA
Post by: fongool on June 30, 2021, 07:38:28 PM
the scale of this IRL is pretty insane:

(https://live.staticflickr.com/65535/50419471088_242ae4ddb1_b.jpg)