Slap MessageBoards
Skateboarding => Shoes & Gear => Topic started by: ChuckRamone on September 18, 2017, 09:47:05 PM
-
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
-
I think those P2 boards with the carbon insert make good rain boards. I rode one in snow, rain, etc.. and the pop and such doesn't feel any different than the day I bought it.
-
Do these actually work/last?
http://www.rushbearings.com/skateboardbearings/all-weather-stainless-steel-bearings (http://www.rushbearings.com/skateboardbearings/all-weather-stainless-steel-bearings)
-
I found an old Jeff Kendal reissue w bombers and it's great.....funny how the bearings run good....
-
My friend/old roommate had a rain board that I used to borrow a bunch so I set up my own. I just use whatever cheap bearings I can find with soft cruiser wheels, old trucks and whatever razortailed deck I don't care about.
-
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
-
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
-
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
-
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
Born and raised in Enumclaw. Not sure if you know were that is but its a really small town. I live in Hawaii now.But I visit home pretty often to film and see family and friends.
-
I just built out a brand new setup that is 90% the same parts as my beat up set up so i'm retiring the beat one to a rain/snow board
-
when I lived in Oregon I ran an old 8.5, mini logo bearings, used ace trucks and OJ 60mm Hot Juice wheels that held up really well, I had to re grip that setup a few times but I am a big fan of rain boards
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
Born and raised in Enumclaw. Not sure if you know were that is but its a really small town. I live in Hawaii now.But I visit home pretty often to film and see family and friends.
I've heard of Enumclaw but don't think I've ever been there. I grew up in Snohomish County. Hawaii is a place I've thought about living. Maybe when I'm a retiree and surfing will be the better option.
-
Borderline not on topic, but I ended up getting rained out bombing a relatively mellow hill about a year back, and I was using those cheap Indy bearings with a metal shield. Immediately after the session they seized up (as one would expect), and were nearly unridable. It was the only board setup I had a couple hours from home, so I rode through it till eventually they loosened back up. Now they are one of the fastest set of bearings I own. I don't understand why, and I certainly would not recommend them to anyone, but somehow the rain and dirt caused my bearings to improve.
That's my shit story, and now I too wanna build a rain/snow setup.
-
I went to lolapalooza in enumclaw.....
Skating through puddles is fun.....
-
Borderline not on topic, but I ended up getting rained out bombing a relatively mellow hill about a year back, and I was using those cheap Indy bearings with a metal shield. Immediately after the session they seized up (as one would expect), and were nearly unridable. It was the only board setup I had a couple hours from home, so I rode through it till eventually they loosened back up. Now they are one of the fastest set of bearings I own. I don't understand why, and I certainly would not recommend them to anyone, but somehow the rain and dirt caused my bearings to improve.
That's my shit story, and now I too wanna build a rain/snow setup.
I once skated home in the rain with my cruiser set up which had Bones Reds in there. I was drunk and hungover and busy the next couple of days so I couldn't be bothered sorting out the bearings right away. They seized up completely and were rusty as fuck. I took them apart, cleaned them properly and after that they've been the most excellent bearings I've had. This was over two years ago and they're still going strong. Maybe rusting up your bearings is the secret trick to make them last. :)
Also thinking about that time and the stories in this thread, I kinda wanna make a rain set up myself now too. Got all the other shit I'd need except stainless steel bearings. Maybe next time I get some skate stuff, I'll try to find some stainless steel bearings also. :)
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
Born and raised in Enumclaw. Not sure if you know were that is but its a really small town. I live in Hawaii now.But I visit home pretty often to film and see family and friends.
I've heard of Enumclaw but don't think I've ever been there. I grew up in Snohomish County. Hawaii is a place I've thought about living. Maybe when I'm a retiree and surfing will be the better option.
Hawaii isn't the place you'd want to move to unless you know you're going to have a good stable job. Foreign investors are buying up property like crazy, driving up the cost of living and homes. Making $53k a year is considered "low income".
But if you wanna retire out here, have lots of money saved up, then go for it! I'd recommend not Oahu though.
-
i have one. it was originally just a second setup, but i ended up skating in the rain with it so now its all heavy and squeaky so now its exclusively a rain board. its a welcome 8.something, ace 44s with slipped axles, 50-something mm welcome wheels and rusty bearings.
-
I got a cruiser which ended up being a board for bad weather, its a welcome 8.6 from last summer, with thunders, mini logos (not worth spending much if they may get ruined fast) and 55 spitfires, I forget the exact type of spitfire but one of the softer ones. Its nice to have a board that i don't care about considering theres snow/melting snow for over half of the year here.
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
Born and raised in Enumclaw. Not sure if you know were that is but its a really small town. I live in Hawaii now.But I visit home pretty often to film and see family and friends.
I've heard of Enumclaw but don't think I've ever been there. I grew up in Snohomish County. Hawaii is a place I've thought about living. Maybe when I'm a retiree and surfing will be the better option.
yea not much in the claw you aint missing nothing. Snoho is super sick. Its expensive over here man. Like everything. Luckily me and my wife don't have to worry about it because shes in the military so that helps a lot.
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
Born and raised in Enumclaw. Not sure if you know were that is but its a really small town. I live in Hawaii now.But I visit home pretty often to film and see family and friends.
I've heard of Enumclaw but don't think I've ever been there. I grew up in Snohomish County. Hawaii is a place I've thought about living. Maybe when I'm a retiree and surfing will be the better option.
Hawaii isn't the place you'd want to move to unless you know you're going to have a good stable job. Foreign investors are buying up property like crazy, driving up the cost of living and homes. Making $53k a year is considered "low income".
But if you wanna retire out here, have lots of money saved up, then go for it! I'd recommend not Oahu though.
Couldn't have said it better. I am on Oahu currently. When I first moved here a year ago the Mcdonolds was offering something like 7.75. And I am not sure if that was the minimum wage. But thinking about that is crazy. We lived in a 300sq ft "shack" for a year and we paid way more then I want to say. Do you live on island?
-
Living in Portland rain boards are a must .I ride my cruiser in all weather. Roskopp reissue, Indy 169s, some 60mm longboard wheels(Maybe Gumballs?) and Reds. I got the wheels and bearings off of a longboard I bought at Goodwill for around $15. I've had them at least 7 years and the bearings still cook, despite being ridden through puddles and never cleaned.
I also have a Politic/Domestics shaped deck with orange Reynolds Indy's(also a goodwill score) and Jivaro softies on it. I'll take this one out to spots on soggier days.
-
I?ve been thinking of this more and more today and have come to the conclusion that I need a rain setup. Fuck being rained out from a session.
Any recommendations for bearings and a board? Ideally I?d like bearings that won?t rust and a board that won?t go soggy. :)
-
Well, I set up a rain cruiser and a normal rain setup a few days ago. Went cruising a bit in the wet yesterday and then skating for about an hour and it was 100% awesome. Normal boards and normal bearings. They haven't rusted or gone soggy yet, but time will tell how it'll all play out. Just came back from cruising to the pharmacy and corner store in the rain and 8°C (46°F) with my shorts on cuz I busted my knee yesterday and it was so fucking nice cruising in the rain. I didn't remember how much I love rain and skating in the rain somehow has a special aspect to it that makes it somehow even more amazing. 😄
I guess the point of my rambling is: get a rain setup, it's awesome!
If the bearings rust too easily or become a hassle, I think I gotta try out some stainless steel ones. 🤔
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
do any of you have one? I'm thinking of setting one up. here in the rainy pnw it would get some good use.
what part of pnw
western washington
that's whats up. Try and enjoy the rain
thanks. I will. are you in the pnw too?
Born and raised in Enumclaw. Not sure if you know were that is but its a really small town. I live in Hawaii now.But I visit home pretty often to film and see family and friends.
I swear you guys are just making these town names up.
-
uhivurf is a real town
no, just joking ;D
-
Cruised some 8 km in the rain yesterday and it was still awesome. Slippery as fuck though with all the fallen leaves even more so. 🙂
-
Do these actually work/last?
http://www.rushbearings.com/skateboardbearings/all-weather-stainless-steel-bearings (http://www.rushbearings.com/skateboardbearings/all-weather-stainless-steel-bearings)
good question. hard luck also has all-weather bearings. I wonder how they hold up after lots of use in bad weather. anyone tried these kinds of bearings?
-
sugar deck,tensor trucks, and old reds...I just don`t give a fuck when wet
-
My rain setup bearings (Indy 5s) pretty much completely seized up. I put a bunch more lube in there when they had dried out and forced them to spin. Now they seem to spin ok. Haven't tried skating it after that yet as it's dark & cold and I've been busy with life. Bearings with removable shields popped seem to work much better for a rain setup. Got that in my rain cruiser and I haven't had much problems with that if I remember to lube it after a proper soak.
-
I will do everything within my power to not be outside if it's raining, so a rain set up? No.
-
mine is a couch, the tv, and beer.
-
Years ago homie in Eugene had an uncut deck as his rain board. I think it was one of those "shape your own" kits companies occasionally make, like Creature and Alien. He said it was sick and it was so huge it acted as a fender, if you know what I'm trying to say. It looked kinda crazy but seemed like a rad idea.
(http://skatearea.com/wp-content/uploads/2016/07/custom-skateboard-decks-shapes-deck-uncut-skateboard-decks-picture.jpg)
-
The new Powell Flight decks are getting a lot of positive feedback. Could be a potential rain deck?
https://www.youtube.com/watch?v=bpb5gbEO7qU
-
I used to live in Portland so I pretty much dealt with rain every day, but a little trick I picked up was to clean your bearings and pack them with white lithium grease (you can buy a tube from an auto parts store for like $3) This will pretty much water proof your bearings and not allow them to rust up, as long as you give your wheels a spin before storing it. It's good for riding in the rain, but when it's dry it can make you slightly slower than normal since the grease is pretty thick.
-
My rain setup is my basement.
-
I used to live in Portland so I pretty much dealt with rain every day, but a little trick I picked up was to clean your bearings and pack them with white lithium grease (you can buy a tube from an auto parts store for like $3) This will pretty much water proof your bearings and not allow them to rust up, as long as you give your wheels a spin before storing it. It's good for riding in the rain, but when it's dry it can make you slightly slower than normal since the grease is pretty thick.
I moved to Portland. Got any covered spots you can share? It fucking rains so much here.
-
Expand Quote
I used to live in Portland so I pretty much dealt with rain every day, but a little trick I picked up was to clean your bearings and pack them with white lithium grease (you can buy a tube from an auto parts store for like $3) This will pretty much water proof your bearings and not allow them to rust up, as long as you give your wheels a spin before storing it. It's good for riding in the rain, but when it's dry it can make you slightly slower than normal since the grease is pretty thick.
I moved to Portland. Got any covered spots you can share? It fucking rains so much here.
Pretty much any parking garage (I liked Lloyd Center's) or Burnside, and there's a tiny indoor skatepark (and I mean tiny) on SE 20th, which is really just a mini bowl, mini ramp, and mini street section and it costs like 7 bucks a day/50 a month, worth it if you're desperate and can spare the cash. https://www.cwskate.com/
But yeah, the rain there is a real bummer.
-
Expand Quote
Expand Quote
I used to live in Portland so I pretty much dealt with rain every day, but a little trick I picked up was to clean your bearings and pack them with white lithium grease (you can buy a tube from an auto parts store for like $3) This will pretty much water proof your bearings and not allow them to rust up, as long as you give your wheels a spin before storing it. It's good for riding in the rain, but when it's dry it can make you slightly slower than normal since the grease is pretty thick.
I moved to Portland. Got any covered spots you can share? It fucking rains so much here.
Pretty much any parking garage (I liked Lloyd Center's) or Burnside, and there's a tiny indoor skatepark (and I mean tiny) on SE 20th, which is really just a mini bowl, mini ramp, and mini street section and it costs like 7 bucks a day/50 a month, worth it if you're desperate and can spare the cash. https://www.cwskate.com/
But yeah, the rain there is a real bummer.
Safeway on SE Cesar Chavez and Powell has a curb and a wall to wallride. I live right next to it and see people skating all the time.
-
Expand Quote
Expand Quote
Expand Quote
I used to live in Portland so I pretty much dealt with rain every day, but a little trick I picked up was to clean your bearings and pack them with white lithium grease (you can buy a tube from an auto parts store for like $3) This will pretty much water proof your bearings and not allow them to rust up, as long as you give your wheels a spin before storing it. It's good for riding in the rain, but when it's dry it can make you slightly slower than normal since the grease is pretty thick.
I moved to Portland. Got any covered spots you can share? It fucking rains so much here.
Pretty much any parking garage (I liked Lloyd Center's) or Burnside, and there's a tiny indoor skatepark (and I mean tiny) on SE 20th, which is really just a mini bowl, mini ramp, and mini street section and it costs like 7 bucks a day/50 a month, worth it if you're desperate and can spare the cash. https://www.cwskate.com/
But yeah, the rain there is a real bummer.
Safeway on SE Cesar Chavez and Powell has a curb and a wall to wallride. I live right next to it and see people skating all the time.
ooh thats close to me, the safeway on broadway also has a nice curb in the underground truck loading area, got kicked out the other day but normally dont have issues.
-
if your bearings stop moving from rust, just skate again in the rain and they will get moving once they’re wet.
-
do you sierra fellers think that a wheel with a wider riding surface would provide more traction or less in the rain/wet? one would think its relatable to bike tires.
-
do you sierra fellers think that a wheel with a wider riding surface would provide more traction or less in the rain/wet? one would think its relatable to bike tires.
Less. A wider wheel will hydroplane more easily. Dunno what that'd be like on a skateboard but I imagine it not being very fun at all. 😊
-
Yes it's worth it if you live in the northwest, I grew up in Olympia, WA. There's a pretty strong scene for a smaller city and everyone in my crew had a rain board at one time. Just some old trucks and a deck with soft wheels so you don't slip out just making a turn or something while you're cruising. Rain boarding almost becomes a different activity in itself, fat puddles become spots. It's dope and definitely helps you keep your sanity over the winter. Spending this winter in AZ though (-:
And just as with normal skating, "higher quality" bearings don't really matter. If your wheels are spinning too well just roll through some more puddles and that shit'll be good