Author Topic: The Set-up Thread (Read 4800815 times)

tzhangdox · « **Reply #18570 on:** July 31, 2018, 02:18:19 PM »

Quote from: mariomister on July 31, 2018, 05:54:21 AM

Isle Jon Nguyen 8.375 full deep white
Film trucks 6.0
Taste Wheels 53mm conical shape
ashes griptape
Screwhead hardware
Modus bearings i think abec 5 (the cheapest one)

vans slip on Pro

how are the film trucks?

shripshrapper · « **Reply #18571 on:** July 31, 2018, 02:47:51 PM »

Quote from: shit_for_brains on July 30, 2018, 12:16:31 PM

I saw someone with vertical slide marks on their noise and tail and it disgusted me. Those are not from nose or tail slides. Then there are a few horizontal ones way away from the baseplate and it was just a horror show. What are you doing to produce those? Stop whatever it is. I won't even get into 45 degree looking board/lip marks.

Oh shit.. I think I met SFB somewhere

Seadramon · « **Reply #18572 on:** July 31, 2018, 03:17:21 PM »

Quote from: tzhangdox on July 31, 2018, 02:18:19 PM

Quote from: mariomister on July 31, 2018, 05:54:21 AM
Expand Quote

Isle Jon Nguyen 8.375 full deep white
Film trucks 6.0
Taste Wheels 53mm conical shape
ashes griptape
Screwhead hardware
Modus bearings i think abec 5 (the cheapest one)

vans slip on Pro
[close]

how are the film trucks?

....gets asked everytime he posts a set up

tzhangdox · « **Reply #18573 on:** July 31, 2018, 03:34:22 PM »

Quote from: Seadramon on July 31, 2018, 03:17:21 PM

Quote from: tzhangdox on July 31, 2018, 02:18:19 PM
Expand Quote
Quote from: mariomister on July 31, 2018, 05:54:21 AM
Expand Quote

Isle Jon Nguyen 8.375 full deep white
Film trucks 6.0
Taste Wheels 53mm conical shape
ashes griptape
Screwhead hardware
Modus bearings i think abec 5 (the cheapest one)

vans slip on Pro
[close]

how are the film trucks?
[close]

....gets asked everytime he posts a set up

what do you expect when its the only set of them on the entire forum

TheVisitor · « **Reply #18574 on:** July 31, 2018, 10:38:24 PM »

I took everyone's advice in regards to wanting to support Quasi, but having reservations about PS Stix recent quality control issues. First session was pretty good, although I must say the board doesn't have the same *snap* sound that BBS/DSM boards make when you smack the tail, but the pop didn't seem lacking.

144p · « **Reply #18575 on:** August 01, 2018, 11:48:04 AM »

Sized down a bit.
Real Mellow Low Pro 8.5 x 32.25
Venture polished 5.8
spitfire f4 53 classic 99a
bronson g3
mob
Nike SB Dunk High BA W/ fp kingfoam orthotics

Xen · « **Reply #18576 on:** August 01, 2018, 12:30:05 PM »

Quote from: 144p on August 01, 2018, 11:48:04 AM

Sized down a bit.
Real Mellow Low Pro 8.5 x 32.25
Venture polished 5.8
spitfire f4 53 classic 99a
bronson g3
mob
Nike SB Dunk High BA W/ fp kingfoam orthotics

Venture love!

Was looking at the 8.3 lowpro but want something short and fat, like a B16 but not a B16

Vitriol · « **Reply #18577 on:** August 01, 2018, 05:50:35 PM »

Quote from: 144p on August 01, 2018, 11:48:04 AM

Nike SB Dunk High BA W/ fp kingfoam orthotics

I wanted to try something like that next, but I was wondering, does the very narrow middle of the dunk sole not affect how the insole sits in there? I mean, rising the arch support too much or something?
Oh! and how is the cushioning with your combo then? Thanks.

144p · « **Reply #18578 on:** August 01, 2018, 10:04:54 PM »

The arch hasn’t bothered me at all. To me they fit perfect in the dunks.
I plan on running this combo for a while.
Little more board feel than the standard insoles

mariomister · « **Reply #18579 on:** August 02, 2018, 01:15:25 AM »

Quote from: tzhangdox on July 31, 2018, 02:18:19 PM

Quote from: mariomister on July 31, 2018, 05:54:21 AM
Expand Quote

Isle Jon Nguyen 8.375 full deep white
Film trucks 6.0
Taste Wheels 53mm conical shape
ashes griptape
Screwhead hardware
Modus bearings i think abec 5 (the cheapest one)

vans slip on Pro
[close]

how are the film trucks?

good trucks

Deekay · « **Reply #18580 on:** August 02, 2018, 04:04:36 AM »

Quote from: mariomister on August 02, 2018, 01:15:25 AM

Quote from: tzhangdox on July 31, 2018, 02:18:19 PM
Expand Quote
Quote from: mariomister on July 31, 2018, 05:54:21 AM
Expand Quote

Isle Jon Nguyen 8.375 full deep white
Film trucks 6.0
Taste Wheels 53mm conical shape
ashes griptape
Screwhead hardware
Modus bearings i think abec 5 (the cheapest one)

vans slip on Pro
[close]

how are the film trucks?
[close]

good trucks

tl;dr: "good"

TwisT · « **Reply #18581 on:** August 02, 2018, 12:05:05 PM »

8.25 City Stars
Destructo
Crupie 53mm 101a
Diamond bearings
Bronza hardware

FrenchFriedClownFingers · « **Reply #18582 on:** August 02, 2018, 03:04:04 PM »

this thing is fun.

indy 149
bronson g2
thrasher hardware
spitfire f4
bones bushings

Slacks · « **Reply #18583 on:** August 02, 2018, 07:27:15 PM »

Has anyone tried a Foundation recently .... cause KOTR is kinda getting me hyped

Little Debbie · « **Reply #18584 on:** August 02, 2018, 07:31:28 PM »

they're good, still flat as you remember them

toque · « **Reply #18585 on:** August 02, 2018, 11:39:30 PM »

Isle set up is cool
nice to see 144 feeling AWAKE

Jollyoli · « **Reply #18586 on:** August 03, 2018, 05:19:27 AM »

Polar 8
thunder HiTi 147
Spitfire Classics 54
Swiss 6
Krux DL kingpins
Bones 1/8 riser
bolts

Some Herman G6 rediscovered in the back of a cupboard.

art hellman · « **Reply #18587 on:** August 03, 2018, 09:42:06 AM »

Polar Hjalte 8.5
Indy 149 ti (w/cast 6 hole baseplates and indy aftermarket conical bushings)
Spitfire Formula 4 53mm Radial Worrest 99a
Swiss 6
3D Allen hardware
Jessup

it's a homage to Looks OK to Me

http://vimeo.com/190080675

shit_for_brains · « **Reply #18588 on:** August 03, 2018, 10:13:03 AM »

^ Two of my favorites in one of my favorite parts

drinny · « **Reply #18589 on:** August 03, 2018, 11:09:01 AM »

Almost Willow 7.75"
Venture V-Hollow Hi 5.25"
Spitfire Lock-ins 52mm 101d
Swiss 6
Shorty's 7/8" Allen Bolts
Jessup
Stickers

First attempt at sanding and painting off a graphic.
2 inside washers for flush wheel edge (looks wide on pic, but isn't).
Lathed a few mm off the tail, felt weird & long out of the box.

HangtenNoseblunt · « **Reply #18590 on:** August 04, 2018, 12:06:18 AM »

those wheels look gigantic

BMCsteve · « **Reply #18591 on:** August 04, 2018, 07:18:30 AM »

Quote from: 144p on August 01, 2018, 11:48:04 AM

Sized down a bit.
Real Mellow Low Pro 8.5 x 32.25
Venture polished 5.8
spitfire f4 53 classic 99a
bronson g3
mob
Nike SB Dunk High BA W/ fp kingfoam orthotics

How does the low pro mellow feel? I used to skate low pros all the time but since I started skating more mellow concave/kick boards I stopped. this might be perfect

Not Local · « **Reply #18592 on:** August 04, 2018, 12:22:16 PM »

Tom Knox/ 159s/ Bullet Church Glass 60mm 95a

the snake · « **Reply #18593 on:** August 04, 2018, 12:33:40 PM »

Quote from: drinny on August 03, 2018, 11:09:01 AM

Almost Willow 7.75"
Venture V-Hollow Hi 5.25"
Spitfire Lock-ins 52mm 101d
Swiss 6
Shorty's 7/8" Allen Bolts
Jessup
Stickers

First attempt at sanding and painting off a graphic.
2 inside washers for flush wheel edge (looks wide on pic, but isn't).
Lathed a few mm off the tail, felt weird & long out of the box.

that wings hands sticker is great

Buck Bundy · « **Reply #18594 on:** August 04, 2018, 10:03:41 PM »

WKND 8x31.75
Hollow Indy 139’s
F4’s 54mm
Swiss
Bones medium bushings
Indy hardware
Jessup

I’ve been riding Quasi decks for a few months so I stuck with PS and picked up another WKND. I had one that I rode for a few sessions but the wheelbase was way too big and was throwing me off. This set up is perfect. The F4/Swiss/Indy combo is amazing. I grabbed another WKND since it was on sale so I’m set for the next few months.

Nth syd bear · « **Reply #18595 on:** August 05, 2018, 07:37:36 AM »

^^ive been eyeing up a koston wknd deck on sale..
That’s got me thinking might have to grab

Jared · « **Reply #18596 on:** August 05, 2018, 11:29:58 PM »

Quote from: TwisT on August 02, 2018, 12:05:05 PM

8.25 City Stars
Destructo
Crupie 53mm 101a
Diamond bearings
Bronza hardware

I back this but WTF? How?

full of jerks · « **Reply #18597 on:** August 05, 2018, 11:34:36 PM »

which one of you guys is this?

Slacks · « **Reply #18598 on:** August 05, 2018, 11:35:46 PM »

Quote from: Not Local on August 04, 2018, 12:22:16 PM

Tom Knox/ 159s/ Bullet Church Glass 60mm 95a

By god does this look fun, you always skate this shape?

TwisT · « **Reply #18599 on:** August 06, 2018, 05:19:29 AM »

Quote from: Jared on August 05, 2018, 11:29:58 PM

Quote from: TwisT on August 02, 2018, 12:05:05 PM
Expand Quote
8.25 City Stars
Destructo
Crupie 53mm 101a
Diamond bearings
Bronza hardware

[close]
I back this but WTF? How?

The distributor sells them on amazon. It’s new stock. I’m not riding some random 15 year deck

Author Topic: The Set-up Thread (Read 4800815 times)

Little Debbie

shit_for_brains

Not Local