Author Topic: Trick Tips  (Read 137703 times)

0 Members and 2 Guests are viewing this topic.

timmywheeler

  • Guest
Re: Trick Tips
« Reply #270 on: July 23, 2008, 01:42:42 PM »
For some reason, trick tips never help me...I just skate and get it eventually.

bbk

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 5151
  • Rep: 278
  • Dopeness
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #271 on: July 23, 2008, 06:36:07 PM »
inward heels anyone??  i started fooling around with them today and my friend told me that you need to scissor kick it in order to catch it....

thanks....
i point my backfoot a little bit backwards with my toes on pretty much the middle of the tail, I place my front foot just a lil bit more up then the middle, and i stand on the balls behind the toes on the edge, than i lean forward(forward like in front of your body, not the way you're riding), shoulders paralel with the board, pop with a slight shove-motion, and just kick straight out, I don't think i "scissor kick", I havn't filmed one so I don't know how they look, but my friends said I do them the proper non-pressurey way...

timmywheeler

  • Guest
Re: Trick Tips
« Reply #272 on: July 23, 2008, 08:35:26 PM »
My biggest problem is that I can drop in 10 foot bowls and shit, but I can't ride switch, so even a simple rock and roll will throw me off.  Any suggestions?

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #273 on: July 25, 2008, 12:16:34 PM »
ok i need help coming out of a backside boneless on tranny.... i just dont how to properly jump with my board back into the ramp....

suggestions??
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

gnartastic

  • Guest
Re: Trick Tips
« Reply #274 on: July 25, 2008, 12:35:57 PM »

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #275 on: July 25, 2008, 12:49:54 PM »
Expand Quote
i need help riding off curbs  :( :'(
[close]

try castration and shutting the fuck up....
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

gnartastic

  • Guest
Re: Trick Tips
« Reply #276 on: July 25, 2008, 01:14:44 PM »
Expand Quote
Expand Quote
i need help riding off curbs  :( :'(
[close]
[close]

try castration and shutting the fuck up....
FUCK YOU PIECE OF SHIT

skate_Toronto

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 70
  • Rep: -7
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #277 on: July 26, 2008, 10:48:55 AM »
noseblunts on ledges? I can get out to fakie, but to regular has been hard. Is it kinda like getting out of nosegrind, or different?

EricLogan

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 6254
  • Rep: 836
  • the ghost of Turd Ferguson's past
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #278 on: July 26, 2008, 08:12:53 PM »
^ more like coming out of a lipslide to regular the way you gotta keep your body contorted to turn it back
I rarely venture into classic slap and the one time I do it I find a guy getting his dick eaten by a dolphin.

Tuna

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 5367
  • Rep: 224
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #279 on: July 27, 2008, 12:41:52 AM »
I need help with varial heels, anyone got any good tips?

I can get it to flip, but it flips really low to the ground and slow as hell,

i always see so many guys do fuckin sick ones, Dill, Rowley, Gino, etc and i just want to learn them

skate_Toronto

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 70
  • Rep: -7
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #280 on: July 28, 2008, 07:35:24 AM »
it helps if you flick in the direction it's spinning, to me that helps it get a faster spin, and makes it look better. So basically your feet would be going in two opposite directions. I'm regular, so my front foot flicks to the left, and my right foot goes to the right, shoving the board frontside.

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #281 on: July 28, 2008, 06:23:01 PM »
ok i need help coming out of a backside boneless on tranny.... i just dont how to properly jump with my board back into the ramp....

suggestions??
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

goyle

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 77
  • Rep: -8
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #282 on: August 02, 2008, 09:05:18 PM »
Wallies are probably the funnest trick. Easiest to learn out of a mellow bank before you try them on something verticle. The simplest and nicest looking way to do them is backside.

heckler

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 6170
  • Rep: 475
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Trick Tips
« Reply #283 on: August 04, 2008, 07:11:44 PM »
Impossibles, every time I try to get the front foot off I end up flipping the board.
Ha SLAP's resident libtard and NY pro cocksucker.

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #284 on: August 04, 2008, 09:28:54 PM »
Impossibles, every time I try to get the front foot off I end up flipping the board.

same here...
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

Jonorhea

  • Guest
Re: Trick Tips
« Reply #285 on: August 04, 2008, 10:08:31 PM »
50-50 :-\

Achilles Heel

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 40
  • Rep: 3
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #286 on: August 06, 2008, 12:38:22 PM »

loophole

  • Guest
Re: Trick Tips
« Reply #287 on: August 11, 2008, 09:18:52 PM »
i just can't lock my blunts and noseblunts. tips, anyone?

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #288 on: August 12, 2008, 01:07:59 AM »
i just can't lock my blunts and noseblunts. tips, anyone?

frontside or backside?  on tranny, rails or curbs??

well i can only help you on doing front blunts on rails because the box i skate is made of wood and is shit to slide....

for front blunts it feels pretty instinctive, like you really just have to pop your tail over and center your weight on it, forcing it down onto the rail....  coming out fakie also comes pretty naturally, its coming for normal thats tough and your really have to work to keep yourself from rolling out fakie....

as for front noseblunts, all i can say is that they feel like frontside lipsides, you got to ge t that big swinging motion going to bring your nose over the rail...  a friend told me that is a good idea to do them kinda like a transfer noseslide first before trying to go full on noseblunt, so maybe that helps....  i might try it later when i skate...

come back to singapore and skate man!!
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

Tuna

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 5367
  • Rep: 224
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #289 on: September 10, 2008, 09:35:23 PM »
270 out of half cab noseslides please.

i can do the half cab noseslide just fine, but the 270 out is getting the best of me.

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #290 on: September 12, 2008, 07:45:23 PM »
coming out regular from back tails? i finally got them slightly consistent on curbs but keep coming out fakie......
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

skate_Toronto

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 70
  • Rep: -7
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #291 on: September 13, 2008, 07:22:47 AM »
it's all in your shoulders. Keep them more parallel to the ledge and then just tell youself to turn out at the end.

EricLogan

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 6254
  • Rep: 836
  • the ghost of Turd Ferguson's past
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #292 on: September 13, 2008, 10:17:16 PM »
270 out of half cab noseslides please.

i can do the half cab noseslide just fine, but the 270 out is getting the best of me.

learn power-slidey full cabs first?

no one ever spins all the way outta nose slide 270's, I'd assume it's the same as the cheater cab's
I rarely venture into classic slap and the one time I do it I find a guy getting his dick eaten by a dolphin.

Tuna

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 5367
  • Rep: 224
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #293 on: September 13, 2008, 10:53:46 PM »
for the trick i need this one for, i think i need to spin all the way out.

or at least 180.

ugly ass kook

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 475
  • Rep: -58
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #294 on: September 22, 2008, 11:48:05 PM »
for the trick i need this one for, i think i need to spin all the way out.

or at least 180.
rotate them shoulders son

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #295 on: October 05, 2008, 10:21:53 AM »
backside 360s anyone?   can get a semi-high bs 225 degree rotation before the board flies away from my feet....

thanks in advance....
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

Cheapboarder

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1925
  • Rep: -73
  • IT'S THE GOOCH!
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #296 on: October 05, 2008, 11:07:57 AM »
Expand Quote
270 out of half cab noseslides please.

i can do the half cab noseslide just fine, but the 270 out is getting the best of me.
[close]

learn power-slidey full cabs first?

no one ever spins all the way outta nose slide 270's, I'd assume it's the same as the cheater cab's

We call it a che-vert in the bis.

I mean ronnie creager at least.

kyleishere

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 49
  • Rep: -5
  • massimo!
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #297 on: November 22, 2008, 07:26:10 PM »
HARDFLIPS. PLEASE. they are such a bitch...

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1890
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Trick Tips
« Reply #298 on: November 22, 2008, 09:48:46 PM »
HARDFLIPS. PLEASE. they are such a bitch...

check a few pages back i posted a trick tip on them.....  but make sure you have a solid fs pop shove before anything else....
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

kyleishere

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 49
  • Rep: -5
  • massimo!
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Trick Tips
« Reply #299 on: November 22, 2008, 11:33:40 PM »
Expand Quote
HARDFLIPS. PLEASE. they are such a bitch...
[close]

check a few pages back i posted a trick tip on them.....  but make sure you have a solid fs pop shove before anything else....
thanks, and yeah, front shoves are one of my favorite tricks.