Author Topic: Skate Shit you've Bought Recently  (Read 293284 times)

0 Members and 1 Guest are viewing this topic.

Krooked antihero

  • Hero Member
  • *****
  • Posts: 640
  • Rep: 32
Re: Skate Shit you've Bought Recently
« Reply #1830 on: May 04, 2017, 01:47:24 AM »
Quote from: Krooked antihero  link=topic=82832.msg2638064#msg2638064 date=1493800271
Quote from: Krooked antihero  link=topic=82832.msg2638042#msg2638042 date=1493793074
Where did you get that 411-hoodie?


Transworld sells them http://shoptws.mybigcommerce.com/411vm-sweathsirt-black/
Yea I know that transworld sells them but assuming by that Aste beanie (finnish brand) firstblood82 is in europe like myself...

sorry, 2 package. one from tactics and one from lamina (411 was from tactics)
Damn, I was hoping to get that hoodie from EU.
europe's like the capitol of england and france and whatever

tangar

  • SLAP Pal
  • ******
  • Posts: 1908
  • Rep: 62
  • THINK LESS
Re: Skate Shit you've Bought Recently
« Reply #1831 on: May 04, 2017, 10:41:37 AM »
bones swiss and hard luck ceramics
excited to take the pepsi challenge
Please keep us updated, my next bearing purchase is depending on you.
Man the long board truck thing killed indy for me. I was willing to set aside the racism, but long boarding, gtfo... - DH

Jud Nestorkins

  • Hero Member
  • *****
  • Posts: 815
  • Rep: -39
Re: Skate Shit you've Bought Recently
« Reply #1832 on: May 05, 2017, 02:37:18 AM »
Just ordered this.


8.625 90s football shaped deck.











Also got:

Ace 44s (all they had in 44s were 380 specials but I'll just use normal nuts)
50mm Formula 4s 101D classics (fuck it I like ,y wheels small even if my deck is huge)
Bones Swiss L2s



And this belt.





Krooked antihero

  • Hero Member
  • *****
  • Posts: 640
  • Rep: 32
Re: Skate Shit you've Bought Recently
« Reply #1833 on: May 05, 2017, 12:47:08 PM »

Got my first paycheck today :)
europe's like the capitol of england and france and whatever

Silky Johnson

  • SLAP Pal
  • ******
  • Posts: 4199
  • Rep: 814
Re: Skate Shit you've Bought Recently
« Reply #1834 on: May 05, 2017, 01:46:02 PM »
Shit matches your quilt dog, rad purchase ^

clamy

  • Sr. Member
  • ****
  • Posts: 479
  • Rep: 81
Re: Skate Shit you've Bought Recently
« Reply #1835 on: May 09, 2017, 03:04:12 AM »
ATTN: Finland :-*





Bought the two slicks for the wall, the stabbing is for my friend and the spaceman is for myself.

I'm about to set the one in the middle up.


CINCINNATI

  • SLAP Pal
  • ******
  • Posts: 1339
  • Rep: 61
Re: Skate Shit you've Bought Recently
« Reply #1836 on: May 09, 2017, 12:43:08 PM »
ATTN: Finland :-*





Bought the two slicks for the wall, the stabbing is for my friend and the spaceman is for myself.

I'm about to set the one in the middle up.




<3

Joe Pesci

  • SLAP Pal
  • ******
  • Posts: 1599
  • Rep: -87
Re: Skate Shit you've Bought Recently
« Reply #1837 on: May 09, 2017, 09:31:08 PM »




Internet sales too good
« Last Edit: May 10, 2017, 04:58:21 PM by Joe Pesci »

Noble Experiment

  • SLAP Pal
  • ******
  • Posts: 1881
  • Rep: 76
Re: Skate Shit you've Bought Recently
« Reply #1838 on: May 10, 2017, 09:34:43 AM »
Indy universal hardware; works for both phillips and allen
« Last Edit: May 10, 2017, 11:23:09 AM by Noble Experiment »

CINCINNATI

  • SLAP Pal
  • ******
  • Posts: 1339
  • Rep: 61
Re: Skate Shit you've Bought Recently
« Reply #1839 on: May 10, 2017, 09:51:21 AM »
anyone on here score any of the danny way alien workshops or the selego habitat from goodwill? if so, congrats, you outbid me.

micky682

  • SLAP Pal
  • ******
  • Posts: 1641
  • Rep: -29
Re: Skate Shit you've Bought Recently
« Reply #1840 on: May 10, 2017, 10:08:37 AM »
Indy universal hardware; works for both phillips and allen

Wouldn't they strip easier?
Keenan had that special ability to make his switch tricks better than his regular tricks but still let you know they were switch.

Roisto

  • SLAP Pal
  • ******
  • Posts: 1090
  • Rep: 47
Re: Skate Shit you've Bought Recently
« Reply #1841 on: May 10, 2017, 10:14:39 AM »
Indy universal hardware; works for both phillips and allen

Wouldn't they strip easier?

They do. And sadly they seem to be the most common bolts in many shops around here. Allen all the way for me, but I'll rather take philips than these.

HFS40000

  • Jr. Member
  • **
  • Posts: 80
  • Rep: 0
Re: Skate Shit you've Bought Recently
« Reply #1842 on: May 10, 2017, 07:20:16 PM »
Remember Randoms Hardware?  I thought that shit was so dope when I was a kid.  I miss weird pointless gimmicks in skating

Paco Supreme

  • SLAP Pal
  • ******
  • Posts: 2984
  • Rep: 168
  • One Trick Pony
Re: Skate Shit you've Bought Recently
« Reply #1843 on: May 10, 2017, 07:36:18 PM »
Randoms are still around, because who doesn't want to pound bolts out of a board once it's done

HFS40000

  • Jr. Member
  • **
  • Posts: 80
  • Rep: 0
Re: Skate Shit you've Bought Recently
« Reply #1844 on: May 10, 2017, 07:51:50 PM »
haha I just googled them.  Ten bucks for bolts?  Fuuuuck that, the gimmick wasn't that cool

alraunen

  • Hero Member
  • *****
  • Posts: 726
  • Rep: -4
    • www.davidcampillo.net
Re: Skate Shit you've Bought Recently
« Reply #1845 on: May 11, 2017, 11:03:23 PM »
Indy universal hardware; works for both phillips and allen
Wouldn't they strip easier?

They do. And sadly they seem to be the most common bolts in many shops around here. Allen all the way for me, but I'll rather take philips than these.

Been using a set for a year and a half, no problems but they were the only 7/8 silver hardware I found recently

Deekay

  • SLAP Pal
  • ******
  • Posts: 2148
  • Rep: 80
Re: Skate Shit you've Bought Recently
« Reply #1846 on: May 12, 2017, 02:40:36 AM »
Indy universal hardware; works for both phillips and allen
Wouldn't they strip easier?

They do. And sadly they seem to be the most common bolts in many shops around here. Allen all the way for me, but I'll rather take philips than these.

Been using a set for a year and a half, no problems but they were the only 7/8 silver hardware I found recently

Mine stripped right away, I don't think I'll use combi bolts again unless I really don't have a choice. So gross looking too

mynameisnotjeff

  • SLAP Pal
  • ******
  • Posts: 2748
  • Rep: 47
Re: Skate Shit you've Bought Recently
« Reply #1847 on: May 12, 2017, 03:26:23 AM »
Indy universal hardware; works for both phillips and allen
Wouldn't they strip easier?

They do. And sadly they seem to be the most common bolts in many shops around here. Allen all the way for me, but I'll rather take philips than these.

Been using a set for a year and a half, no problems but they were the only 7/8 silver hardware I found recently

Mine stripped right away, I don't think I'll use combi bolts again unless I really don't have a choice. So gross looking too

Picked up a pair of Plus Reserve bolts and they're the same thing. Not sure if these also have the problem they have where the bolts stick out and you have to force them into the deck.
Nothing I do deserves more than an iphone camera.

the_unknown_soldier

  • SLAP Pal
  • ******
  • Posts: 3677
  • Rep: -71
Re: Skate Shit you've Bought Recently
« Reply #1848 on: May 12, 2017, 06:31:53 AM »





Decided to actually try giving bearing maintenance a try rather than just buying new ones whenever they get bad. Was actually very satisfying and it's made a big difference!

20matar

  • SLAP Pal
  • ******
  • Posts: 1507
  • Rep: 125
  • All we like to listen to is Barry Manilow.
Re: Skate Shit you've Bought Recently
« Reply #1849 on: May 12, 2017, 11:07:51 AM »
Decided to actually try giving bearing maintenance a try rather than just buying new ones whenever they get bad. Was actually very satisfying and it's made a big difference!



I just use a gatorade bottle with a rod, full of diesel oil -- since it's the cheapest fuel. But welcome to the club, nonetheless.

Krooked antihero

  • Hero Member
  • *****
  • Posts: 640
  • Rep: 32
Re: Skate Shit you've Bought Recently
« Reply #1850 on: May 12, 2017, 11:57:05 PM »





Decided to actually try giving bearing maintenance a try rather than just buying new ones whenever they get bad. Was actually very satisfying and it's made a big difference!
I have this homie who cleans his set of Swiss atleast once in a month, he takes them fully apart, like removing cages and cleaning every ball manually... He's been been riding that same set for years and years now...
europe's like the capitol of england and france and whatever

fulfillthedream

  • SLAP Pal
  • ******
  • Posts: 3606
  • Rep: -38
Re: Skate Shit you've Bought Recently
« Reply #1851 on: May 13, 2017, 12:22:28 AM »
Quote from: Krooked antihero  link=topic=82832.msg2641460#msg2641460 date=1494658625





Decided to actually try giving bearing maintenance a try rather than just buying new ones whenever they get bad. Was actually very satisfying and it's made a big difference!
I have this homie who cleans his set of Swiss atleast once in a month, he takes them fully apart, like removing cages and cleaning every ball manually... He's been been riding that same set for years and years now...

ha must take some patience... i do it once every 6 months..
Skateboarding is like jacking-off, it's that good- Jeremy Klein

[

SodaJerk

  • SLAP Pal
  • ******
  • Posts: 7775
  • Rep: 800
  • Butterscotch yo!
Re: Skate Shit you've Bought Recently
« Reply #1852 on: May 14, 2017, 05:55:07 AM »
Quote from: Krooked antihero  link=topic=82832.msg2641460#msg2641460 date=1494658625





Decided to actually try giving bearing maintenance a try rather than just buying new ones whenever they get bad. Was actually very satisfying and it's made a big difference!
I have this homie who cleans his set of Swiss atleast once in a month, he takes them fully apart, like removing cages and cleaning every ball manually... He's been been riding that same set for years and years now...

ha must take some patience... i do it once every 6 months..
I do it when it's already too late. I've normally cracked a cage or something before I remember to clean them.

fulfillthedream

  • SLAP Pal
  • ******
  • Posts: 3606
  • Rep: -38
Re: Skate Shit you've Bought Recently
« Reply #1853 on: May 16, 2017, 07:34:55 PM »
I changed wheels recently and saw some rust on my accels so rinsed my bearings - taking the cages in and out is annoying so just take the shields off- rinse the bearings in acetone, dry em well and then rub the shields clean with rubbing alc. so worth it for swiss's


Here's the shit i got recently.




not the most ergonomic but saves a ton of space to take with me on the go- if i need to tighten some bolts during a sesh its nice. Not practical to setup a board with though.




So for the f4's ive tried classics, classic slims, classic wides, conical full and now these radial silms. so far there pretty awesome. probably will revert back to the classics as always though haha wanted to give these a go after seeing a few of you PALs posting em on the set up thread.






had a cheap clip on fish eye. a homie of mine gifted me the VX handle made by death lens so i figured i'd get this. HUGE difference in quality.


Skateboarding is like jacking-off, it's that good- Jeremy Klein

[

Paco Supreme

  • SLAP Pal
  • ******
  • Posts: 2984
  • Rep: 168
  • One Trick Pony
Re: Skate Shit you've Bought Recently
« Reply #1854 on: May 16, 2017, 09:52:58 PM »
Found some SLAP angel stickers online

jamersonbass

  • Sr. Member
  • ****
  • Posts: 267
  • Rep: 11
Re: Skate Shit you've Bought Recently
« Reply #1855 on: May 18, 2017, 02:47:59 PM »





Decided to actually try giving bearing maintenance a try rather than just buying new ones whenever they get bad. Was actually very satisfying and it's made a big difference!

I'm sure there's more cost effective ways to go about it, but this thing along with acetone and speed cream literally brought my Swiss 6 back from the dead.  I got over eager to skate during the spring thaw here in MI and one of the bank spots I regularly skate had a bit of ice with a ton of water trapped beneath on the lip of the bank.  After that session my wheels were literally seizing up.  Bought the cleaning kit, speed cream, and acetone and I'm good as new.  Way less cost than a new set of swiss too.  I suggest just taking the shields off though.

DaveFuck

  • Hero Member
  • *****
  • Posts: 973
  • Rep: 35
Re: Skate Shit you've Bought Recently
« Reply #1856 on: May 24, 2017, 10:13:51 AM »
Got Mindfield AND the DC video from @thesecrettape. dudes the best



Nora9

  • Sr. Member
  • ****
  • Posts: 367
  • Rep: -81
Re: Skate Shit you've Bought Recently
« Reply #1857 on: May 25, 2017, 02:57:55 AM »
2 sets of bones swiss... spending that much on bearings was hard to do hopefully they are worth it.

Monkey_Mcpott

  • SLAP Pal
  • ******
  • Posts: 3518
  • Rep: 160
  • Go buy a Ryan Lay board!
Re: Skate Shit you've Bought Recently
« Reply #1858 on: May 25, 2017, 05:22:38 AM »
A little late to the party but i finally got my hands on this one, Was thinking about making it a cruiser but the graphic is too sick. Might just go ahead and make it a wall board.


shit_for_brains

  • SLAP Pal
  • ******
  • Posts: 11288
  • Rep: 861
Re: Skate Shit you've Bought Recently
« Reply #1859 on: May 25, 2017, 05:48:13 AM »
A little late to the party but i finally got my hands on this one, Was thinking about making it a cruiser but the graphic is too sick. Might just go ahead and make it a wall board.



I really wanted to snag that when it came out and get a big setup going, but collectors and newfound BA fans snatched them all up. I just wanted a good shape. Now I don't care anymore THANKS EVERYBODY

Andrew Allen is a living legend and must be protected.