Author Topic: Woodshop Directory 2017 Thread  (Read 40507 times)

0 Members and 1 Guest are viewing this topic.

Cherb

  • SLAP Pal
  • ******
  • Posts: 1013
  • Rep: -15
Re: Woodshop Directory 2017 Thread
« Reply #180 on: September 20, 2017, 05:10:19 AM »
Got a Krooked board with an " IV" stamped on it, is that generator/BBS?
Yeah. the IV is where the deck was in the stack when it was pressed.

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #181 on: September 20, 2017, 05:13:04 AM »
hook-ups / jk industries ?

BBS I think.....


Anyone that can confirm?
Does the guy from Colony still post here? Who were they pressed by again?
Re: jeremy klein has sent you a package
"I have a few left, they are now on the front page of my website. I use the same woodshop as baker, Deathwish, real, antihero. Glad you like the boards."


From Klein himself...
nice one!

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12571
  • Rep: 666
Re: Woodshop Directory 2017 Thread
« Reply #182 on: September 20, 2017, 09:25:25 AM »
What am I, chopped liver?

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #183 on: September 20, 2017, 10:34:05 AM »
What am I, chopped liver?
lol shit, I only asked because you said "I think....", I always value your input and opinion on gear and hold it in high regard

I used to really like pate as a kid so chopped liver isn't all bad anyway!

Horsemeat

  • Newbie
  • *
  • Posts: 32
  • Rep: 0
Re: Woodshop Directory 2017 Thread
« Reply #184 on: September 20, 2017, 04:17:38 PM »
Got a Krooked board with an " IV" stamped on it, is that generator/BBS?
Yeah. the IV is where the deck was in the stack when it was pressed.

Thanks!

Gay Imp Sausage Metal

  • SLAP Pal
  • ******
  • Posts: 8839
  • Rep: -383
  • We're just 2 lo(b)s(t)ers sitting behind a screen
Re: Woodshop Directory 2017 Thread
« Reply #185 on: September 22, 2017, 12:36:58 AM »
did we get to the bottom of evisen's woodshop? new series is the bomb!
Apparently dwindle
hmmmmm...
haha yeah, nothing definitive I guess, but someone or a couple people said dwindle in this thread and/or others
http://permanentdist.com/about-us/ is saying south central and I can't find them on dwindle's page anymore...
maybe I'll hit them up on insta...

"This is untrue, my client has not been attacked in every country" #yearoftheeagle

Matthew_James

  • Hero Member
  • *****
  • Posts: 756
  • Rep: -154
Re: Woodshop Directory 2017 Thread
« Reply #186 on: September 22, 2017, 06:01:10 AM »
did we get to the bottom of evisen's woodshop? new series is the bomb!
Apparently dwindle
hmmmmm...
haha yeah, nothing definitive I guess, but someone or a couple people said dwindle in this thread and/or others
http://permanentdist.com/about-us/ is saying south central and I can't find them on dwindle's page anymore...
maybe I'll hit them up on insta...


This is what happens when people try to make lists without researching each point on the list, as if things aren't subject to change...
At least when you're a washed-out hipster douchebag in NY, you can milk it at some decent looking, hard to skate spots. In LA you're just a tan-lined faggot in a school yard somewhere.

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #187 on: September 22, 2017, 06:26:22 AM »
did we get to the bottom of evisen's woodshop? new series is the bomb!
Apparently dwindle
hmmmmm...
haha yeah, nothing definitive I guess, but someone or a couple people said dwindle in this thread and/or others
http://permanentdist.com/about-us/ is saying south central and I can't find them on dwindle's page anymore...
maybe I'll hit them up on insta...
ahh right on, cheers! also says on the Evisen page "Evisen skateboards are proudly manufactured in the USA by one of the most in-demand woodshops in the country, and for the first time ever – the brand is now available in the United States thru PERMANENT."
« Last Edit: September 22, 2017, 06:28:26 AM by perverted super otaku! »

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #188 on: September 22, 2017, 06:37:10 AM »
did we get to the bottom of evisen's woodshop? new series is the bomb!
Apparently dwindle
hmmmmm...
haha yeah, nothing definitive I guess, but someone or a couple people said dwindle in this thread and/or others
http://permanentdist.com/about-us/ is saying south central and I can't find them on dwindle's page anymore...
maybe I'll hit them up on insta...


This is what happens when people try to make lists without researching each point on the list, as if things aren't subject to change...
lol dude why even bother trying to troll?, I guarantee this is the most up-to date and accurate list anywhere and it was made with the help of everyone that contributes, I defy you to find me a better one or you could always make your own? if you don't like the idea of a list why even bother to click on the thread? It must be one of two reasons, to fail at trolling or because your own company isn't listed and you're butthurt about it
« Last Edit: September 22, 2017, 01:07:50 PM by perverted super otaku! »

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12571
  • Rep: 666
Re: Woodshop Directory 2017 Thread
« Reply #189 on: September 22, 2017, 08:47:59 AM »
We are the truth....signed....chop liver....


delaware county

  • Jr. Member
  • **
  • Posts: 89
  • Rep: 4
    • www.kineticskateboarding.com
Re: Woodshop Directory 2017 Thread
« Reply #190 on: September 22, 2017, 11:37:01 AM »
We got some Scumco boards in the other day, I always ride em even though I hate pennswood. The ones that came in had made in Canada stickers, They also look and felt different from Penns. Anyone know if they switched and if so what woodshop they came out of because they look awesome.

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #191 on: September 22, 2017, 11:41:17 AM »
We got some Scumco boards in the other day, I always ride em even though I hate pennswood. The ones that came in had made in Canada stickers, They also look and felt different from Penns. Anyone know if they switched and if so what woodshop they came out of because they look awesome.
I'll guess Control, are they light, snappy and have squared off sides you can feel around the edges of the deck? compared to the more curved sanding on boards normally?

pointandclick

  • SLAP Pal
  • ******
  • Posts: 1738
  • Rep: 55
Re: Woodshop Directory 2017 Thread
« Reply #192 on: September 22, 2017, 03:33:06 PM »
We got some Scumco boards in the other day, I always ride em even though I hate pennswood. The ones that came in had made in Canada stickers, They also look and felt different from Penns. Anyone know if they switched and if so what woodshop they came out of because they look awesome.
I'll guess Control, are they shitty, dead and have squared off sides you can feel around the edges of the deck? compared to the more curved sanding on boards normally?
control is the fucking worst wood shop.

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12571
  • Rep: 666
Re: Woodshop Directory 2017 Thread
« Reply #193 on: September 22, 2017, 03:43:18 PM »
We got some Scumco boards in the other day, I always ride em even though I hate pennswood. The ones that came in had made in Canada stickers, They also look and felt different from Penns. Anyone know if they switched and if so what woodshop they came out of because they look awesome.
I'll guess Control, are they shitty, dead and have squared off sides you can feel around the edges of the deck? compared to the more curved sanding on boards normally?
control is the fucking worst wood shop.

Not gonna say control is shitty...but I like pennswood.....yes...control has a more square bevel...and the ones I've seen are pretty mellow

yungapplejuice

  • Jr. Member
  • **
  • Posts: 78
  • Rep: 9
Re: Woodshop Directory 2017 Thread
« Reply #194 on: September 22, 2017, 06:24:42 PM »
hook-ups / jk industries ?

BBS I think.....


Anyone that can confirm?
Does the guy from Colony still post here? Who were they pressed by again?


Re: jeremy klein has sent you a package
"I have a few left, they are now on the front page of my website. I use the same woodshop as baker, Deathwish, real, antihero. Glad you like the boards."


From Klein himself...

good lookin out

Gay Imp Sausage Metal

  • SLAP Pal
  • ******
  • Posts: 8839
  • Rep: -383
  • We're just 2 lo(b)s(t)ers sitting behind a screen
Re: Woodshop Directory 2017 Thread
« Reply #195 on: September 22, 2017, 11:20:07 PM »
https://www.thepalomino.com/collections/latest/products/evisen-usgrow-jewel-8-25
And now we're hearing DSM again... I really wanted a board from this series, and to support these guys after their new vid blows minds, but I don't know if I can do dwindle wood

"This is untrue, my client has not been attacked in every country" #yearoftheeagle

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #196 on: September 23, 2017, 04:44:17 AM »
Ohh looks like they are using SC for NA and DSM for EU and Asia, thanks man! And dwindle makes some of the best boards IMO most definitely skate-able, I'd say give it a try 

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #197 on: September 23, 2017, 04:47:17 AM »
Anyone know who presses Skateboard Cafe?

Matthew_James

  • Hero Member
  • *****
  • Posts: 756
  • Rep: -154
Re: Woodshop Directory 2017 Thread
« Reply #198 on: September 23, 2017, 07:59:42 AM »
At least when you're a washed-out hipster douchebag in NY, you can milk it at some decent looking, hard to skate spots. In LA you're just a tan-lined faggot in a school yard somewhere.

Basingstoke

  • Full Member
  • ***
  • Posts: 239
  • Rep: 8
Re: Woodshop Directory 2017 Thread
« Reply #199 on: September 23, 2017, 12:53:22 PM »
Anyone know who presses Skateboard Cafe?

Pretty sure it was DSM/dwindle and have been told by my local skate shop they are going over to HLC/Jart.

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #200 on: September 24, 2017, 06:58:28 AM »
Anyone know who presses Skateboard Cafe?

Pretty sure it was DSM/dwindle and have been told by my local skate shop they are going over to HLC/Jart.
Sweeet, thanks man

Gay Imp Sausage Metal

  • SLAP Pal
  • ******
  • Posts: 8839
  • Rep: -383
  • We're just 2 lo(b)s(t)ers sitting behind a screen
Re: Woodshop Directory 2017 Thread
« Reply #201 on: September 25, 2017, 10:42:12 PM »
Ohh looks like they are using SC for NA and DSM for EU and Asia, thanks man! And dwindle makes some of the best boards IMO most definitely skate-able, I'd say give it a try  
Why would they do that ??? ugh... I just want to skate one of those jewel/ tama boards from that series!
I think you're in the minority on that dwindle wood, you have some good experience with them?
I swear I'm just going to buy a magenta/ passport because I don't have to worry about about whacky colored plies and low quality wood. Currently eyeing up a few Northern Co.s too though
« Last Edit: September 25, 2017, 10:43:50 PM by Gay Imp Sausage Metal »

"This is untrue, my client has not been attacked in every country" #yearoftheeagle

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #202 on: September 26, 2017, 04:39:19 AM »
I think it's just to save on shipping costs and import tax etc.
I am in the Dwindle preference minority, but from my experience, they come super stiff and stay stiff and poppy longer than anything else, apparently some Pros on non dwindle companies also ride dwindle boards and I feel like this isn't a coincidence
« Last Edit: September 26, 2017, 04:45:48 AM by perverted super otaku! »

sharkin

  • SLAP Pal
  • ******
  • Posts: 1073
  • Rep: 61
Re: Woodshop Directory 2017 Thread
« Reply #203 on: September 26, 2017, 06:24:44 AM »
I can't believe Scumco would stop using pennswood.

Makes me never want another scumco  :-X

Firebert

  • SLAP Pal
  • ******
  • Posts: 2431
  • Rep: -39
    • WEEKEND skateboards
Re: Woodshop Directory 2017 Thread
« Reply #204 on: September 26, 2017, 07:15:45 AM »
I can't believe Scumco would stop using pennswood.

Makes me never want another scumco  :-X

In their defense - pennswood is really hard to deal with.
I've hated immigrants ever since I got here.

perverted super otaku!

  • SLAP Pal
  • ******
  • Posts: 4557
  • Rep: -211
  • "Needless to say, I had the last laugh."
Re: Woodshop Directory 2017 Thread
« Reply #205 on: September 26, 2017, 09:23:57 AM »
I've actually heard that about Generator too, sup with all that?

TheVisitor

  • Full Member
  • ***
  • Posts: 115
  • Rep: -12
Re: Woodshop Directory 2017 Thread
« Reply #206 on: September 26, 2017, 10:26:42 AM »
I know it's 'cool' to shit on Dwindle and I'm personally not a fan of any of their brands when it comes to aesthetics but they really do make some of the best boards on the market. How many companies are using resin epoxy glue, doing individual board pressing and offer a 30 day warranty against breakage?  Oh and their quality control is pretty fucking top notch as well. No fucked up misaligned drilled holes or funky ass concave ala PS Stix. Dwindle has even recently jumped on the fullshape/shovel nose trend with some of their new shapes as well. 

heritage

  • SLAP Pal
  • ******
  • Posts: 3102
  • Rep: 62
Re: Woodshop Directory 2017 Thread
« Reply #207 on: September 26, 2017, 10:41:31 AM »
We got some Scumco boards in the other day, I always ride em even though I hate pennswood. The ones that came in had made in Canada stickers, They also look and felt different from Penns. Anyone know if they switched and if so what woodshop they came out of because they look awesome.
I'll guess Control, are they shitty, dead and have squared off sides you can feel around the edges of the deck? compared to the more curved sanding on boards normally?
control is the fucking worst wood shop.
Not gonna say control is shitty...but I like pennswood.....yes...control has a more square bevel...and the ones I've seen are pretty mellow

I love boards pressed at Control. The shapes are good and I really like the mellow concave.

Firebert

  • SLAP Pal
  • ******
  • Posts: 2431
  • Rep: -39
    • WEEKEND skateboards
Re: Woodshop Directory 2017 Thread
« Reply #208 on: September 26, 2017, 01:02:12 PM »
sup with all that?
Don't know why they choose to ignore people that give them thousands of dollars - pretty weird if you ask me. If I took your money, I would at least return your e-mails/phone calls.
I've hated immigrants ever since I got here.

heritage

  • SLAP Pal
  • ******
  • Posts: 3102
  • Rep: 62
Re: Woodshop Directory 2017 Thread
« Reply #209 on: September 26, 2017, 01:04:41 PM »
^^Can second that. Not here to throw shade or advance anything negative but Penns been jamming people up. It does not surprise me one bit that Scumco had to use Control for a run.