Author Topic: Deathwish to possibly make twin nose boards?  (Read 6260 times)

0 Members and 1 Guest are viewing this topic.

Jud Nestorkins

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1914
  • Rep: -59
  • Only YOU can prevent corporate espionage.
Deathwish to possibly make twin nose boards?
« on: June 13, 2019, 04:27:58 PM »
http://www.youtube.com/watch?v=h9wKmLtCgq8










Maybe they'll put them into production? I see what he means though. I do everything off the tail but heels and front shoves have to be off the nose.
« Last Edit: June 13, 2019, 04:31:24 PM by Jud Nestorkins »

usedtostillskate

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 30
  • Rep: -1
Re: Deathwish to possibly make twin nose boards?
« Reply #1 on: June 13, 2019, 04:42:08 PM »
This is what I've always been looking for. I'll buy one if it goes through production.

Brad Breath

  • Trade Count: (+4)
  • Hero Member
  • *****
  • Posts: 723
  • Rep: 42
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Deathwish to possibly make twin nose boards?
« Reply #2 on: June 13, 2019, 06:27:47 PM »
This is what I've always been looking for. I'll buy one if it goes through production.

Same

Shuh

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 679
  • Rep: 4
Re: Deathwish to possibly make twin nose boards?
« Reply #3 on: June 13, 2019, 09:03:37 PM »
Id buy it if he shorten the overall length, im ok with 14 inch wheelbase, but 14 inch wheelbase with total length of 33 inches in length making it sound like its a longboat.

Dustwardprez

  • Guest
Re: Deathwish to possibly make twin nose boards?
« Reply #4 on: June 13, 2019, 09:11:35 PM »
So long as the ARtwin has the same wheelbase as the reg this is a good idea. I would definitely buy one.

Jud Nestorkins

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1914
  • Rep: -59
  • Only YOU can prevent corporate espionage.
Re: Deathwish to possibly make twin nose boards?
« Reply #5 on: June 13, 2019, 09:59:20 PM »
Id buy it if he shorten the overall length, im ok with 14 inch wheelbase, but 14 inch wheelbase with total length of 33 inches in length making it sound like its a longboat.
Wouldn't that require making both noses smaller basically making it a twin tail though?

Shuh

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 679
  • Rep: 4
Re: Deathwish to possibly make twin nose boards?
« Reply #6 on: June 14, 2019, 01:49:08 AM »
Expand Quote
Id buy it if he shorten the overall length, im ok with 14 inch wheelbase, but 14 inch wheelbase with total length of 33 inches in length making it sound like its a longboat.
[close]
Wouldn't that require making both noses smaller basically making it a twin tail though?

There should be compromise somewhere the exact replicating off the nose on both sides makes the board too long. The other thing they could do is making the wheelbase sub 14 inches to reign in length to atleast 32 inches.

Suffice to say this wont be a cut a paste process if they want to produce it, it will take alot of RnD if they want to do it properly

JB77

  • Guest
Re: Deathwish to possibly make twin nose boards?
« Reply #7 on: June 14, 2019, 02:36:45 AM »
Neen's got an Iron Gym pull-up bar hanging on his door frame behind him.  I've got one of those.  Great piece of equipment, for the money.  Also, cool deck.

Vintagebody

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 655
  • Rep: 76
Re: Deathwish to possibly make twin nose boards?
« Reply #8 on: June 14, 2019, 03:10:11 AM »
I dont know the shape, but I asume theres around half a inch to 1 inch from bolts to the start of the nose. So if they want to make a 32" board, they have to cut this out. Which basicly mean that the nose starts from right behind the bolts.

BMCsteve

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 776
  • Rep: 54
Re: Deathwish to possibly make twin nose boards?
« Reply #9 on: June 14, 2019, 04:21:38 AM »
His wheelbase measurement is off.  it's actually 14.5"

Murge

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2991
  • Rep: 427
Re: Deathwish to possibly make twin nose boards?
« Reply #10 on: June 14, 2019, 04:52:12 AM »
Would definitely buy a twin nose. Especially if they can get that wheel base floating around 14-14.25

SHIREFLIP

  • Guest
Re: Deathwish to possibly make twin nose boards?
« Reply #11 on: June 14, 2019, 06:54:12 AM »
http://www.youtube.com/watch?v=h9wKmLtCgq8










Maybe they'll put them into production? I see what he means though. I do everything off the tail but heels and front shoves have to be off the nose.

You just wrinkled my brain.

el chino

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1880
  • Rep: -375
  • ants suck!
Re: Deathwish to possibly make twin nose boards?
« Reply #12 on: June 14, 2019, 10:14:29 AM »
http://www.youtube.com/watch?v=h9wKmLtCgq8










Maybe they'll put them into production? I see what he means though. I do everything off the tail but heels and front shoves have to be off the nose.
lil kid shit
<iframe class="imgur-album" width="100%" height="550" frameborder="0" src="http://imgur.com/a/8ph4y/embed"></iframe>

whorific

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 568
  • Rep: -169
  • User posts join approval queueModerated
Re: Deathwish to possibly make twin nose boards?
« Reply #13 on: June 14, 2019, 10:22:00 AM »
Id buy it if he shorten the overall length, im ok with 14 inch wheelbase, but 14 inch wheelbase with total length of 33 inches in length making it sound like its a longboat.

yeah even in the vid Neen is like "um,,,ok" as the noses is longer from the bolts on both sides they gotta drop a half in from the center and keep the wheelbase some how maybe 1/4 fromthe center and an 1/8 from each nose? something 33 is way to long
" I did not say this I am not here"

givecigstosurfgroms

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 7013
  • Rep: -958
  • User posts join approval queueModerated
Re: Deathwish to possibly make twin nose boards?
« Reply #14 on: June 14, 2019, 05:44:37 PM »
  I custom order symetrical decks.  I switch the trucks around every while and ride it the other way.  Takes twice as long to razor 'the tail'.   Thats the only reason I get them symetrical.
"I just care about the river, I dont care about your back"

usedtostillskate

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 30
  • Rep: -1
Re: Deathwish to possibly make twin nose boards?
« Reply #15 on: June 14, 2019, 06:21:46 PM »
  I custom order symetrical decks.  I switch the trucks around every while and ride it the other way.  Takes twice as long to razor 'the tail'.   Thats the only reason I get them symetrical.
Where do you custom order them from? I had been thinking about that too, but didn't see where that was an option anywhere.

Nate.Dog

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 119
  • Rep: -9
Re: Deathwish to possibly make twin nose boards?
« Reply #16 on: June 15, 2019, 07:59:45 AM »
  I custom order symetrical decks.  I switch the trucks around every while and ride it the other way.  Takes twice as long to razor 'the tail'.   Thats the only reason I get them symetrical.

Or you could just bite the bullet and learn how to do the switch

SHIREFLIP

  • Guest
Re: Deathwish to possibly make twin nose boards?
« Reply #17 on: June 15, 2019, 10:14:11 AM »
Expand Quote
  I custom order symetrical decks.  I switch the trucks around every while and ride it the other way.  Takes twice as long to razor 'the tail'.   Thats the only reason I get them symetrical.
[close]

Or you could just bite the bullet and learn how to do the switch

Are you implying that he doesn’t know how to do the switch?

Hefty allegation.

Xen

  • Trade Count: (+8)
  • SLAP Pal
  • ******
  • Posts: 8217
  • Rep: 939
  • U neg cuz UR insecure-glad I got under your skin
Re: Deathwish to possibly make twin nose boards?
« Reply #18 on: June 15, 2019, 07:05:38 PM »
There have twin tails and noses long before Neen thought of it, where has he been? I feel his struggle though. My F/S pop shuvs and f/s variel heels are easier and thereby cleaner off the nose (it's also my ocd tell me that).

The Mystery Symetry run from what, 7 years ago were just that: Twin Noses

Twin nose: too big
Twin tail: too small (tho the Ishod shape is damn good).

I wish someone would just make a symmetrical board that is a hybrid; most noses are 7", most tails are 6.5 and usually more rounded (overall). Get a 6.75" kick and merge the nose/tail shapes somehow (or just make slightly shorter noses instead).

Complements4U

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 459
  • Rep: 397
Re: Deathwish to possibly make twin nose boards?
« Reply #19 on: June 16, 2019, 07:37:53 AM »
Xen ur crazy man. Ur the rob of board dimensions. I love it so much it makes me smile . You need a 3d printer so you can print every single sixteenth of an inch varience in every dimension over and over again, you have a hunger that I feel cannot be satiated by the mere mortals at generator

antiwaxxer

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 32
  • Rep: -6
Re: Deathwish to possibly make twin nose boards?
« Reply #20 on: June 20, 2019, 02:15:08 AM »
Matt Berger rides a twin nose shape on Flip. He had a model out but at the time it's not out there. He said on insta he is working on the shape again. In his my set up vid he explains he always used to ride his boards backwards and designed the shape to be twin nose.

Jud Nestorkins

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1914
  • Rep: -59
  • Only YOU can prevent corporate espionage.

Esmith5488

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2286
  • Rep: 390

Starm

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 25
  • Rep: -1
Re: Deathwish to possibly make twin nose boards?
« Reply #23 on: November 12, 2019, 10:54:01 AM »
Double nose if you want to buy.

https://www.deathwishskateboards.com/products/neen-classic-8-5?_pos=1&_sid=725def814&_ss=r
Damn, i've seen that deck around for a bit but they never really marketed it as a twin nose.
« Last Edit: November 12, 2019, 10:57:51 AM by Starm »

CBP

  • Trade Count: (+2)
  • Full Member
  • ***
  • Posts: 116
  • Rep: 26

palelight

  • Trade Count: (+2)
  • SLAP Pal
  • ******
  • Posts: 1010
  • Rep: 166
Re: Deathwish to possibly make twin nose boards?
« Reply #25 on: November 12, 2019, 02:45:54 PM »

FS-OverKOOK

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 1184
  • Rep: 42

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10129
  • Rep: 1891
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Deathwish to possibly make twin nose boards?
« Reply #27 on: November 12, 2019, 10:49:04 PM »
Expand Quote
Expand Quote

I want to grab one but that graphic is bad  :-[.
[close]

Incredibly lazy graphic.
[close]

Baby's first board graphic; I've seen shop boards with more effort put in.
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

palelight

  • Trade Count: (+2)
  • SLAP Pal
  • ******
  • Posts: 1010
  • Rep: 166
Re: Deathwish to possibly make twin nose boards?
« Reply #28 on: November 13, 2019, 12:03:26 AM »
I get wanting to put some respect on the '96 Bulls, but jesus christ, throw the jersey pinstripes on there, the trim, do the font right.

Xen

  • Trade Count: (+8)
  • SLAP Pal
  • ******
  • Posts: 8217
  • Rep: 939
  • U neg cuz UR insecure-glad I got under your skin