Author Topic: Woodshop Directory 2018 Thread  (Read 36474 times)

0 Members and 1 Guest are viewing this topic.

RumpelFoarskin

  • Guest
Re: Woodshop Directory 2018 Thread
« Reply #210 on: March 30, 2018, 02:58:32 PM »
Revive is made by clutch, they are good and strong
how you know what Revive boards are made of  ::)

I want more on this. Schrock says they come from the same place as Birdhouse, Slap theorists state that NHS has invested in them somehow, and now this.

I want to see who is supplying this empire.
It’s in the clutch catalogue page 33 says they got their test from their friends at “revive skateboards” so I asked Andy where they were made on Instagram and he responded with “clutch”. Then I asked clutch if they made revive on Instagram and they said yes.
https://issuu.com/clutchdistribution/docs/clutch_summer_2017_magalog?e=27566739/51518760
« Last Edit: March 30, 2018, 03:01:53 PM by RumpelFoarskin »

curbdrop

  • Newbie
  • *
  • Posts: 31
  • Rep: -3
Re: Woodshop Directory 2018 Thread
« Reply #211 on: March 30, 2018, 09:16:48 PM »
Revive is made by clutch, they are good and strong
how you know what Revive boards are made of  ::)

I want more on this. Schrock says they come from the same place as Birdhouse, Slap theorists state that NHS has invested in them somehow, and now this.

I want to see who is supplying this empire.
It’s in the clutch catalogue page 33 says they got their test from their friends at “revive skateboards” so I asked Andy where they were made on Instagram and he responded with “clutch”. Then I asked clutch if they made revive on Instagram and they said yes.
https://issuu.com/clutchdistribution/docs/clutch_summer_2017_magalog?e=27566739/51518760

Well. There it is.

CrappyChan

  • Full Member
  • ***
  • Posts: 131
  • Rep: -7
Re: Woodshop Directory 2018 Thread
« Reply #212 on: April 02, 2018, 01:40:04 PM »
Also I got a black label recently and it was a Watson laminates, granted it was a pig shape
"From Todd Falcon to Tony Hawk, the Ben Raybourne story"


roba

  • Hero Member
  • *****
  • Posts: 650
  • Rep: 23
Re: Woodshop Directory 2018 Thread
« Reply #213 on: April 03, 2018, 04:57:59 AM »
who makes skatemental? (asking for a friend)
I want a Hollywood movie about dudes in mesh hats forming bonds while pouring DIY 'crete

@grandroba

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12578
  • Rep: 666
Re: Woodshop Directory 2018 Thread
« Reply #214 on: April 03, 2018, 08:37:28 AM »
It had thought same mystery Chinese shop as Crail.....

Matthew_James

  • Hero Member
  • *****
  • Posts: 756
  • Rep: -154
Re: Woodshop Directory 2018 Thread
« Reply #215 on: April 03, 2018, 12:18:41 PM »
did palace change woodshops over the years? had one in 2013 maybe 2014 and it was great then got one late 2016 and it was pretty bad imo


No. Sometimes there's a few flukes in a batch. My last one was pretty good, but it was purchased back in September.

What was wrong with the deck you had?
At least when you're a washed-out hipster douchebag in NY, you can milk it at some decent looking, hard to skate spots. In LA you're just a tan-lined faggot in a school yard somewhere.

Dima

  • Jr. Member
  • **
  • Posts: 60
  • Rep: -4
Re: Woodshop Directory 2018 Thread
« Reply #216 on: April 03, 2018, 12:49:50 PM »
It had thought same mystery Chinese shop as Crail.....

Excel is where crail at least is coming from...

Bristol_Palin

  • Sr. Member
  • ****
  • Posts: 328
  • Rep: 41
Re: Woodshop Directory 2018 Thread
« Reply #217 on: April 09, 2018, 10:14:11 AM »
I remember a while back people talking in this thread about boards they had warping from just sitting around before setting them up. I just set up a passport (generator wood) I got a few months back and it feels great. I also left it in my car for a week during multiple snow storms because I was planning on setting it up while traveling (weather stopped me from setting it up/skating).  No warping at all, but this thread made me kind of nervous about it.

Also I see that this thread says Evisen boards found in North America are South Central. Can anyone confirm this? I really want to try one but do not really want to skate any DSM wood.

fat philly skater

  • Full Member
  • ***
  • Posts: 179
  • Rep: -2
Re: Woodshop Directory 2018 Thread
« Reply #218 on: April 09, 2018, 11:43:58 AM »
I remember a while back people talking in this thread about boards they had warping from just sitting around before setting them up. I just set up a passport (generator wood) I got a few months back and it feels great. I also left it in my car for a week during multiple snow storms because I was planning on setting it up while traveling (weather stopped me from setting it up/skating).  No warping at all, but this thread made me kind of nervous about it.

Also I see that this thread says Evisen boards found in North America are South Central. Can anyone confirm this? I really want to try one but do not really want to skate any DSM wood.
I've heard north american evison boards are dsm

Clock3rs

  • Newbie
  • *
  • Posts: 19
  • Rep: 1
Re: Woodshop Directory 2018 Thread
« Reply #219 on: April 09, 2018, 12:02:38 PM »
Am I the only one not feeling the hype about ps stix boards? I was riding 2 x quasi boards lately and both ended up either chipping in 2 sessions or just breaking after one fucking day.

My generator polar deck was holding up 2 months straight.

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12578
  • Rep: 666
Re: Woodshop Directory 2018 Thread
« Reply #220 on: April 09, 2018, 12:05:30 PM »
You sure they were PS?  Serial number?

Clock3rs

  • Newbie
  • *
  • Posts: 19
  • Rep: 1
Re: Woodshop Directory 2018 Thread
« Reply #221 on: April 09, 2018, 12:14:23 PM »
You sure they were PS?  Serial number?

just ungripped the nose. definitely a ps. "Hand Crafted by PS Stix" blablabla PS59178-0237

probably my last ps stix board for now. gonna stick to generator as they never disappointed me (yet)

Bristol_Palin

  • Sr. Member
  • ****
  • Posts: 328
  • Rep: 41
Re: Woodshop Directory 2018 Thread
« Reply #222 on: April 09, 2018, 12:21:02 PM »
I remember a while back people talking in this thread about boards they had warping from just sitting around before setting them up. I just set up a passport (generator wood) I got a few months back and it feels great. I also left it in my car for a week during multiple snow storms because I was planning on setting it up while traveling (weather stopped me from setting it up/skating).  No warping at all, but this thread made me kind of nervous about it.

Also I see that this thread says Evisen boards found in North America are South Central. Can anyone confirm this? I really want to try one but do not really want to skate any DSM wood.
I've heard north american evison boards are dsm

I just checked Theories online store and it says, "These decks have been imported direct from Japan and are super limited, so jump on these asap!" I am just going to check one out when I see one in a shop, or send an email to Theories and just ask.

NJFly318

  • Jr. Member
  • **
  • Posts: 72
  • Rep: 0
Re: Woodshop Directory 2018 Thread
« Reply #223 on: April 09, 2018, 01:51:52 PM »
Am I the only one not feeling the hype about ps stix boards? I was riding 2 x quasi boards lately and both ended up either chipping in 2 sessions or just breaking after one fucking day.

My generator polar deck was holding up 2 months straight.

I have a Street Plant shaped board, first session tail blows out and splits, like it was really dry. The DLX boards that I usually ride just feel so much better and last forever.
« Last Edit: April 10, 2018, 05:18:08 PM by NJFly318 »

Gay Imp Sausage Metal

  • SLAP Pal
  • ******
  • Posts: 8846
  • Rep: -383
  • We're just 2 lo(b)s(t)ers sitting behind a screen
Re: Woodshop Directory 2018 Thread
« Reply #224 on: April 09, 2018, 05:48:49 PM »
I remember a while back people talking in this thread about boards they had warping from just sitting around before setting them up. I just set up a passport (generator wood) I got a few months back and it feels great. I also left it in my car for a week during multiple snow storms because I was planning on setting it up while traveling (weather stopped me from setting it up/skating).  No warping at all, but this thread made me kind of nervous about it.

Also I see that this thread says Evisen boards found in North America are South Central. Can anyone confirm this? I really want to try one but do not really want to skate any DSM wood.
I've heard north american evison boards are dsm

I just checked Theories online store and it says, "These decks have been imported direct from Japan and are super limited, so jump on these asap!" I am just going to check one out when I see one in a shop, or send an email to Theories and just ask.
but even the ones they sell in Japan are DSM

"This is untrue, my client has not been attacked in every country" #yearoftheeagle

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12578
  • Rep: 666
Re: Woodshop Directory 2018 Thread
« Reply #225 on: April 09, 2018, 09:46:47 PM »
You sure they were PS?  Serial number?

just ungripped the nose. definitely a ps. "Hand Crafted by PS Stix" blablabla PS59178-0237

probably my last ps stix board for now. gonna stick to generator as they never disappointed me (yet)

Good news is that it's actually kinda hard to skate a PS board....everyone seems to be switching over.

Horsemeat

  • Newbie
  • *
  • Posts: 32
  • Rep: 0
Re: Woodshop Directory 2018 Thread
« Reply #226 on: April 10, 2018, 02:28:49 AM »
Also had a couple ps stix crap out on me. One started delaminating and chipping off the tail and the other sogged out in like a week. Bummer

Shuh

  • Jr. Member
  • **
  • Posts: 63
  • Rep: 0
Re: Woodshop Directory 2018 Thread
« Reply #227 on: April 10, 2018, 06:30:22 AM »
Currently on ps stix quasi 8.25 last year's release, I dunno it's holding up even I rode it once in the rain which I thought it  was gonna die but didnt. But then again I'm sort of still a newb only flatground and hillbombs so maybe that's why it's holding up

fat philly skater

  • Full Member
  • ***
  • Posts: 179
  • Rep: -2
Re: Woodshop Directory 2018 Thread
« Reply #228 on: April 10, 2018, 07:04:30 AM »
Am I the only one not feeling the hype about ps stix boards? I was riding 2 x quasi boards lately and both ended up either chipping in 2 sessions or just breaking after one fucking day.

My generator polar deck was holding up 2 months straight.
PS is so hit or miss the last one I had was a super old FA dill photo board that was one of the first few runs they did and I had that for almost 2 months but the one before that was a pretty recent quasi with the bugs on it and it died at almost 2 weeks

micky682

  • SLAP Pal
  • ******
  • Posts: 1642
  • Rep: -29
Re: Woodshop Directory 2018 Thread
« Reply #229 on: April 10, 2018, 07:28:06 AM »
Am I the only one not feeling the hype about ps stix boards? I was riding 2 x quasi boards lately and both ended up either chipping in 2 sessions or just breaking after one fucking day.

My generator polar deck was holding up 2 months straight.
PS is so hit or miss the last one I had was a super old FA dill photo board that was one of the first few runs they did and I had that for almost 2 months but the one before that was a pretty recent quasi with the bugs on it and it died at almost 2 weeks
This. When it’s good PS stix is on par with Generator/bbs but it’s not as consistent as them.
Keenan had that special ability to make his switch tricks better than his regular tricks but still let you know they were switch.

NJFly318

  • Jr. Member
  • **
  • Posts: 72
  • Rep: 0
Re: Woodshop Directory 2018 Thread
« Reply #230 on: April 13, 2018, 03:56:57 PM »
How do South Central produced decks stack up against Bareback/Generator produced DLX decks?
I’ve never skated SC wood.

j....soy.....

  • SLAP Pal
  • ******
  • Posts: 12578
  • Rep: 666
Re: Woodshop Directory 2018 Thread
« Reply #231 on: April 14, 2018, 12:10:56 AM »
A bit heavier.....but not too clunky.  generator has a pretty broad spectrum but I'd say the SC boards I had were a bit steeper.  I'd say the SC was strong too.  I'd say SC is between generator and chapman.

NJFly318

  • Jr. Member
  • **
  • Posts: 72
  • Rep: 0
Re: Woodshop Directory 2018 Thread
« Reply #232 on: April 14, 2018, 04:02:04 AM »
A bit heavier.....but not too clunky.  generator has a pretty broad spectrum but I'd say the SC boards I had were a bit steeper.  I'd say the SC was strong too.  I'd say SC is between generator and chapman.

Thanks for the feedback soy.

furiruuzu

  • Guest
Re: Woodshop Directory 2018 Thread
« Reply #233 on: April 14, 2018, 12:57:09 PM »
Brujaria is split between Clutch and Quincy. Skating two of their Quincy made 8.3" boards right now and really enjoying them! Just wanted you to know so you could update the list, thanks!

halfsleeper

  • Newbie
  • *
  • Posts: 26
  • Rep: 8
Re: Woodshop Directory 2018 Thread
« Reply #234 on: May 04, 2018, 10:25:54 AM »
if there’s a shape thread that exists, please point me to it. apologies for being uneducated / out of place / generally existing.

i really love a specific hockey shape. 8.5 x 32ish x 14ish wb, stubby nose and tail, steeper concave but not as crazy as some FA boards (some have such short tails it's crazy). the last 3 i’ve skated have delammed and exploded in a similar way. i’m really bummed on quality, fairly certain they were all PS.

i just want this shape. where go / wat do?

FrozenIndustries

  • Jr. Member
  • **
  • Posts: 65
  • Rep: 5
Re: Woodshop Directory 2018 Thread
« Reply #235 on: May 04, 2018, 11:08:01 AM »
if there’s a shape thread that exists, please point me to it. apologies for being uneducated / out of place / generally existing.

i really love a specific hockey shape. 8.5 x 32ish x 14ish wb, stubby nose and tail, steeper concave but not as crazy as some FA boards (some have such short tails it's crazy). the last 3 i’ve skated have delammed and exploded in a similar way. i’m really bummed on quality, fairly certain they were all PS.

i just want this shape. where go / wat do?

If it is what I am thinking of, the Quasi 8.5x32.12 (14.25wb), squarish nose and tail. Also a PS board.

halfsleeper

  • Newbie
  • *
  • Posts: 26
  • Rep: 8
Re: Woodshop Directory 2018 Thread
« Reply #236 on: May 04, 2018, 11:16:57 AM »
If it is what I am thinking of, the Quasi 8.5x32.12 (14.25wb), squarish nose and tail. Also a PS board.

right, very similar. but again i'm mainly bummed on the PS quality control issues.

anyone make this shape through BBS? i've heard hockey/FA are transitioning to BBS so i'm on the lookout. just curious if this shape exists in other BBS clients - maybe hookups/JK?

TwisT

  • SLAP Pal
  • ******
  • Posts: 1981
  • Rep: -13
Re: Woodshop Directory 2018 Thread
« Reply #237 on: May 04, 2018, 11:26:10 AM »
If it is what I am thinking of, the Quasi 8.5x32.12 (14.25wb), squarish nose and tail. Also a PS board.

right, very similar. but again i'm mainly bummed on the PS quality control issues.

anyone make this shape through BBS? i've heard hockey/FA are transitioning to BBS so i'm on the lookout. just curious if this shape exists in other BBS clients - maybe hookups/JK?

Hookups/JK are on the pointier side. WKND may have what you're looking for

FrenchFriedClownFingers

  • Hero Member
  • *****
  • Posts: 595
  • Rep: 86
  • AndyRoysNeck
Re: Woodshop Directory 2018 Thread
« Reply #238 on: May 04, 2018, 11:53:21 AM »
scumco logo boards are made by control

pointandclick

  • SLAP Pal
  • ******
  • Posts: 1738
  • Rep: 55
Re: Woodshop Directory 2018 Thread
« Reply #239 on: May 04, 2018, 05:44:22 PM »
scumco logo boards are made by control
which logo boards?