It might seem completely too deep, but I was thinking about an earlier conversation in this thread regarding the overall length and other dimensions that didn't add up.
From checking wheelbase, length of nose / tail and overall length, why hadn't someone listed here the number that relates to the measurement of the trucks in a deck.
Each truck from center holes is about 53mm, so 106mm in total, which equates to about 4.175 " so now when measuring decks, you can use that to add or subtract to get the length or other missing figures.
Eg Wheelbase 14.25, nose 7, tail 6.625 (then +4.175 trucks) = 32.05" which seems about right for this board in front of me right now.
There would still be the slight differences between individual boards from some brands, or the difference between laying the tape measure flat on the concave, vs keeping it tight across for the overall length, but this could definitely help work out some of those measurements.
The funny thing is when I apply that method to this chart from Real, the truck measurements vary a bit, 4.13 on one and 4.27 on another, so I guess it is relative and not absolute.
* I will have to go and measure my Real boards like this now and see.