The Set-up Thread

[Sk.A.T.A.N]

Sized down from an 8.38 to an 8.25. Not sure if i'll regret it yet. Been having a gear crisis with boards and shoes this year, I don't even know what I like anymore.

Pass~Port 8.25, Indy 149 standard, F4 Tablets 53mm.

Love that board graphic. Pass~port boards are always really good too.

[jimstolz]

Expand Quote

[close]

This image screams
 "I put my hand on my griptape as i fully bend down to stationary mob kickflip"

I can't kickflip unless I'm moving and it's a very level flick, thank you very much.

But the essence of what you're saying is true. I am a terrible skateboarder.

[jimstolz]

don't make me go grab my other board. It's a David Loy. I am that cool.
 It also has big wheels and wack new trucks. both my sets of good trucks are in nyc still.

[DR EVIL]

impressive

[DR EVIL]

very nice

[jimstolz]

Why only one rail?

[jtrpma]

Why only one rail?

don't know about his personal reason, but i don't really need a heelside rail (only helps me to bone bs grabs) toeside helps for all boneless stuff and for bs boardslides you can lean foreward nicely without sticking and therefore slide "more aggressively"
on fs boardslides it gives you a little stopper before washing out but doesn't slow you down.

basically you'll end up with two contact points to the ledge/rail (one rail, one deck) and that is as stable as two rails.

[Shufflessss]

Ah, the Tershy/ Couch shape. So sick. I thought the WB was a little shorter than 14"?

Expand Quote

9.25" with a 14" WB
Thunder 149s
Bones STF v1 53mm
Bones Swiss 6
Mob

Skating some 3ST.002's currently. I'm in that purgatory of not knowing what shoes I like anymore.

[close]

Great shape.. No overhang wit the 149s?

Update, couldn't do it. The WB ended up measuring at 14" long but it was still too short. I've been working on making a football and that's definitely not what I wanted. The board overhung the trucks and it felt super off.




Colony Sample
9" wide with a 14.5" WB
Thunder 149s
New set of Bones STF v1 53mm
Bones Swiss 6
Mob

[Global Moderator]

7.625 x 31.625" w/ 14" WB Control blank
Venture 5.0 Low Lights w/Bones Hard bushings
Hitek 45mm, 83b wheels
Bones Swiss Ceramics
World Pygmy Nuts hardware
Jessup Grip

[Technique]

Expand Quote

Ah, the Tershy/ Couch shape. So sick. I thought the WB was a little shorter than 14"?

[close]

Expand Quote

Expand Quote

9.25" with a 14" WB
Thunder 149s
Bones STF v1 53mm
Bones Swiss 6
Mob

Skating some 3ST.002's currently. I'm in that purgatory of not knowing what shoes I like anymore.

[close]

Great shape.. No overhang wit the 149s?

[close]

Update, couldn't do it. The WB ended up measuring at 14" long but it was still too short. I've been working on making a football and that's definitely not what I wanted. The board overhung the trucks and it felt super off.




Colony Sample
9" wide with a 14.5" WB
Thunder 149s
New set of Bones STF v1 53mm
Bones Swiss 6
Mob

My man!
I’ve been riding one of these chocolate decks for about a month and some change now and it still feels amazing. Definitely looking for similar stuff, otherwise just gonna but another crail deck soon.
Those shoes look like some high-tech crocs though, no offense. Get yourself something classier with a board like that.

[ScarceOne]

Snack 8.5” wb 14.25” ps stix
Venture 5.8
Wayward puig 52mm


the closest td bank to this location

free image upload api

[Shufflessss]

Expand Quote

Expand Quote

Ah, the Tershy/ Couch shape. So sick. I thought the WB was a little shorter than 14"?

[close]

Expand Quote

Expand Quote

9.25" with a 14" WB
Thunder 149s
Bones STF v1 53mm
Bones Swiss 6
Mob

Skating some 3ST.002's currently. I'm in that purgatory of not knowing what shoes I like anymore.

[close]

Great shape.. No overhang wit the 149s?

[close]

Update, couldn't do it. The WB ended up measuring at 14" long but it was still too short. I've been working on making a football and that's definitely not what I wanted. The board overhung the trucks and it felt super off.




Colony Sample
9" wide with a 14.5" WB
Thunder 149s
New set of Bones STF v1 53mm
Bones Swiss 6
Mob

[close]

My man!
I’ve been riding one of these chocolate decks for about a month and some change now and it still feels amazing. Definitely looking for similar stuff, otherwise just gonna but another crail deck soon.
Those shoes look like some high-tech crocs though, no offense. Get yourself something classier with a board like that.

No offense taken, I hate these shoes. Some days they feel great the others they make my feet cramp. I'm just trying to kill them now so I can skate something else.

[sneakpeekmeek]

7.625 x 31.625" w/ 14" WB Control blank
Venture 5.0 Low Lights w/Bones Hard bushings
Hitek 45mm, 83b wheels
Bones Swiss Ceramics
World Pygmy Nuts hardware
Jessup Grip

Not sure how I feel about the griptape over the bolts but neat setup

[straight]

7.625 x 31.625" w/ 14" WB Control blank
Venture 5.0 Low Lights w/Bones Hard bushings
Hitek 45mm, 83b wheels
Bones Swiss Ceramics
World Pygmy Nuts hardware
Jessup Grip

why tho

[JB77]

7.625 x 31.625" w/ 14" WB Control blank
Venture 5.0 Low Lights w/Bones Hard bushings
Hitek 45mm, 83b wheels
Bones Swiss Ceramics
World Pygmy Nuts hardware
Jessup Grip

This is such a rad setup.  Looks like 1994.

[Ok]

Expand Quote

7.625 x 31.625" w/ 14" WB Control blank
Venture 5.0 Low Lights w/Bones Hard bushings
Hitek 45mm, 83b wheels
Bones Swiss Ceramics
World Pygmy Nuts hardware
Jessup Grip

[close]

This is such a rad setup.  Looks like 1994.

Yup

[HyenaChaser]

Expand Quote

Why only one rail?

[close]

don't know about his personal reason, but i don't really need a heelside rail (only helps me to bone bs grabs) toeside helps for all boneless stuff and for bs boardslides you can lean foreward nicely without sticking and therefore slide "more aggressively"
on fs boardslides it gives you a little stopper before washing out but doesn't slow you down.

basically you'll end up with two contact points to the ledge/rail (one rail, one deck) and that is as stable as two rails.

I am now considering getting rails. This was a compelling case.

[Gray Imp Sausage Metal]

Expand Quote

Expand Quote

Expand Quote

Ah, the Tershy/ Couch shape. So sick. I thought the WB was a little shorter than 14"?

[close]

Expand Quote

Expand Quote

9.25" with a 14" WB
Thunder 149s
Bones STF v1 53mm
Bones Swiss 6
Mob

Skating some 3ST.002's currently. I'm in that purgatory of not knowing what shoes I like anymore.

[close]

Great shape.. No overhang wit the 149s?

[close]

Update, couldn't do it. The WB ended up measuring at 14" long but it was still too short. I've been working on making a football and that's definitely not what I wanted. The board overhung the trucks and it felt super off.




Colony Sample
9" wide with a 14.5" WB
Thunder 149s
New set of Bones STF v1 53mm
Bones Swiss 6
Mob

[close]

My man!
I’ve been riding one of these chocolate decks for about a month and some change now and it still feels amazing. Definitely looking for similar stuff, otherwise just gonna but another crail deck soon.
Those shoes look like some high-tech crocs though, no offense. Get yourself something classier with a board like that.

[close]

No offense taken, I hate these shoes. Some days they feel great the others they make my feet cramp. I'm just trying to kill them now so I can skate something else.

are those the shoes Gay referred to as ankle vaginas?

Also, don’t knock gripping over your bolts until you’ve tried it; it’s like tossing salad, once you’ve done it you can never go back to not doing it 🤪

[jtrpma]

Haven’t had a setup this fresh in a long time


8.75 x 32.5 madness “disease”
159 hollows with random bushings
1/8” hard risers
F4 conical fulls used to be 58s now 54ish
Cheap ceramic something bearings
A bit of mob and a bit of jessup
Whatever hardware

[Hefe43]

8.75 x 32.5 madness “disease”
159 hollows with random bushings
1/8” hard risers
F4 conical fulls used to be 58s now 54ish
Cheap ceramic something bearings
A bit of mob and a bit of jessup
Whatever hardware

Is that deck asymmetrical or am I tripping?

[jtrpma]

Expand Quote

8.75 x 32.5 madness “disease”
159 hollows with random bushings
1/8” hard risers
F4 conical fulls used to be 58s now 54ish
Cheap ceramic something bearings
A bit of mob and a bit of jessup
Whatever hardware

[close]

Is that deck asymmetrical or am I tripping?

You’re trippin, it looks weird in the picture...

[GBLange]

Expand Quote

Ah, the Tershy/ Couch shape. So sick. I thought the WB was a little shorter than 14"?

[close]

Expand Quote

Expand Quote

9.25" with a 14" WB
Thunder 149s
Bones STF v1 53mm
Bones Swiss 6
Mob

Skating some 3ST.002's currently. I'm in that purgatory of not knowing what shoes I like anymore.

[close]

Great shape.. No overhang wit the 149s?

[close]

Update, couldn't do it. The WB ended up measuring at 14" long but it was still too short. I've been working on making a football and that's definitely not what I wanted. The board overhung the trucks and it felt super off.




Colony Sample
9" wide with a 14.5" WB
Thunder 149s
New set of Bones STF v1 53mm
Bones Swiss 6
Mob

Damn loving that shape as well.. Hard to find egg shaped decks here in my country..

[Krooked antihero]

New board and wheels
AH Black Widow 8.5" x 31.7" w/ 14.12" wb
Ace 44
Spitfire F4 52mm classic shape 101du
Swiss
Jessup
Indy bolts

[mynameisnotjeff]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Ah, the Tershy/ Couch shape. So sick. I thought the WB was a little shorter than 14"?

[close]

Expand Quote

Expand Quote

9.25" with a 14" WB
Thunder 149s
Bones STF v1 53mm
Bones Swiss 6
Mob

Skating some 3ST.002's currently. I'm in that purgatory of not knowing what shoes I like anymore.

[close]

Great shape.. No overhang wit the 149s?

[close]

Update, couldn't do it. The WB ended up measuring at 14" long but it was still too short. I've been working on making a football and that's definitely not what I wanted. The board overhung the trucks and it felt super off.

Colony Sample
9" wide with a 14.5" WB
Thunder 149s
New set of Bones STF v1 53mm
Bones Swiss 6
Mob

[close]

My man!
I’ve been riding one of these chocolate decks for about a month and some change now and it still feels amazing. Definitely looking for similar stuff, otherwise just gonna but another crail deck soon.
Those shoes look like some high-tech crocs though, no offense. Get yourself something classier with a board like that.

[close]

No offense taken, I hate these shoes. Some days they feel great the others they make my feet cramp. I'm just trying to kill them now so I can skate something else.

[close]

are those the shoes Gay referred to as ankle vaginas?

Also, don’t knock gripping over your bolts until you’ve tried it; it’s like tossing salad, once you’ve done it you can never go back to not doing it 🤪

Yes, they are. Had a pair of the Adidas equivalent of that knit material and while comfy these shoes aren't for wider feet.

[TwisT]

Grip over the bolts is great! It’s only annoying if you have to switch boards quick

[Shuh]

I dont know if this is the place to ask but I'll try anyway, has anyone successful done 8 inch board with 8.25 truck setup?

[WorkClothscape]

I dont know if this is the place to ask but I'll try anyway, has anyone successful done 8 inch board with 8.25 truck setup?

I haven't seen exactly 8 inch board on 8.25 trucks but I know many people who don't mind having wider trucks than the deck. That 0.25" difference probably makes your wheels flush with the board.

[Shuh]

Expand Quote

I dont know if this is the place to ask but I'll try anyway, has anyone successful done 8 inch board with 8.25 truck setup?

[close]

I haven't seen exactly 8 inch board on 8.25 trucks but I know many people who don't mind having wider trucks than the deck. That 0.25" difference probably makes your wheels flush with the board.

I actually been running 8.25 with thunder 149 for the longest time find no problem, my only concern tail shapes with 8 inch boards cause I have no experience with them

[FrozenIndustries]

New board and wheels
AH Black Widow 8.5" x 31.7" w/ 14.12" wb
Ace 44
Spitfire F4 52mm classic shape 101du
Swiss
Jessup
Indy bolts

That looks amazing. Is this your first time running that shape, and either way, how is it?

[Krooked antihero]

Expand Quote

New board and wheels
AH Black Widow 8.5" x 31.7" w/ 14.12" wb
Ace 44
Spitfire F4 52mm classic shape 101du
Swiss
Jessup
Indy bolts

[close]

That looks amazing. Is this your first time running that shape, and either way, how is it?

Yes it is my first time on this shape, I skated it like 30mins last night and so far it’s so awesome. Never really had football shape before but I can see myself skating another one in future for sure, 360’s and big spins off the nose felt so fucking nice😊