The Set-up Thread

[toque]

OK I'm vibing with the LV grip haha

[pops]

My 3yr old Indys are close to retirement. Not sure if I should stick with Indys because i'm also interested trying Film hollows. any word on Film Trucks who has ridden those?

[jay_nev]

My 3yr old Indys are close to retirement. Not sure if I should stick with Indys because i'm also interested trying Film hollows. any word on Film Trucks who has ridden those?

see trucks/less popular trucks thread re: search film. Also indy’s $25 outta ccs right now see sale gear thread.

[SneakySecrets]

Expand Quote

My 3yr old Indys are close to retirement. Not sure if I should stick with Indys because i'm also interested trying Film hollows. any word on Film Trucks who has ridden those?

[close]

see trucks/less popular trucks thread re: search film. Also indy’s $25 outta ccs right now see sale gear thread.

I’ve got a set of Films and love them.  They sit just a tad lower than indy’s but keep the wheelbase in like indy’s do (doesn’t push it out like ventures/thunders)  Turn and grind great.

[JoelyRighteous]

Saintmarks Arabian Leopard - Squarish shape 8.5 WB:14.5 L:32.33
149 hollows
OJ elite 53s
Sunday bearings

Haven't skated it yet but digging the look of the shape



Retired my slave to build a deck for cruising/beers/daily transport.

Slave 8.5
149 hollows
53mm Keyframes
Collective Co ti bearings

[pops]

Expand Quote

Expand Quote

My 3yr old Indys are close to retirement. Not sure if I should stick with Indys because i'm also interested trying Film hollows. any word on Film Trucks who has ridden those?

[close]

see trucks/less popular trucks thread re: search film. Also indy’s $25 outta ccs right now see sale gear thread.

[close]

I’ve got a set of Films and love them.  They sit just a tad lower than indy’s but keep the wheelbase in like indy’s do (doesn’t push it out like ventures/thunders)  Turn and grind great.

Thanks a lot, I might cop a set of hollows next then.

[newspaperparty]

Frog 8.6
Ace 55
F4 Conical full 56mm

[TheLowerBack]

Saintmarks Arabian Leopard - Squarish shape 8.5 WB:14.5 L:32.33
149 hollows
OJ elite 53s
Sunday bearings

Haven't skated it yet but digging the look of the shape



Retired my slave to build a deck for cruising/beers/daily transport.

Slave 8.5
149 hollows
53mm Keyframes
Collective Co ti bearings

Those Saintsmark’s look dope. If they get US distro I’ll get one for sure. Says they’re Mexican made, I’m assuming Clutch?

[JoelyRighteous]

Expand Quote

Saintmarks Arabian Leopard - Squarish shape 8.5 WB:14.5 L:32.33
149 hollows
OJ elite 53s
Sunday bearings

Haven't skated it yet but digging the look of the shape



Retired my slave to build a deck for cruising/beers/daily transport.

Slave 8.5
149 hollows
53mm Keyframes
Collective Co ti bearings

[close]

Those Saintsmark’s look dope. If they get US distro I’ll get one for sure. Says they’re Mexican made, I’m assuming Clutch?

I believe so, but not positive to be honest. The wood feels great though, real crisp and snappy.

[tom]

I got 7 sessions with the Darkroom, but a poorly landed heelflip shortly later followed up with an equally poorly landed switch flip led to a couple cracks in the middle of the board. I’ve had several people ask if I were skating an old AWS that I held onto

[chappers]

Frog 8.6
Ace 55
F4 Conical full 56mm

i like this a lot

[munchbox]

gnar
was waiting for someone to pull the trigger on this, gotta let us know how it skates. loving the grip job

[Gray Imp Sausage Metal]

Guess I’m buying another Shin model once my surf shape is done...

[bigdave]

Polar 9" Bengt Alv "Probability Studies"
Ace 55mm
Swap between 52mm spits and 56mm OJ II Dressens depending on what I'm riding.
Bronson raws in both.

Shoes....currently vans low pro, GT Blazers, vans slip on pro (ditching these, hate how they feel on the top of my arches)
my carts got two pairs of vans ol skool pro hi-tops imma bout to get into I think.

[jay_nev]

Polar 9" Bengt Alv "Probability Studies"
Ace 55mm
Swap between 52mm spits and 56mm OJ II Dressens depending on what I'm riding.
Bronson raws in both.

Shoes....currently vans low pro, GT Blazers, vans slip on pro (ditching these, hate how they feel on the top of my arches)
my carts got two pairs of vans ol skool pro hi-tops imma bout to get into I think.

got a pic of this setup?

[bigdave]

Expand Quote

Polar 9" Bengt Alv "Probability Studies"
Ace 55mm
Swap between 52mm spits and 56mm OJ II Dressens depending on what I'm riding.
Bronson raws in both.

Shoes....currently vans low pro, GT Blazers, vans slip on pro (ditching these, hate how they feel on the top of my arches)
my carts got two pairs of vans ol skool pro hi-tops imma bout to get into I think.

[close]

got a pic of this setup?

Sure, at home. At the office now, can post later if I remember. Funny I almost threw my board in to skate some curbs at lunch, now wish I had.

[Esmith5488]

I got 7 sessions with the Darkroom, but a poorly landed heelflip shortly later followed up with an equally poorly landed switch flip led to a couple cracks in the middle of the board. I’ve had several people ask if I were skating an old AWS that I held onto

Have that raney board in my basement. Set up after I got ventures and it was a little too short with those trucks. Saving it incase I go back to thunder or indy since I really liked that shape on thunders

[Alex]

Expand Quote

Weirdly hit axle on my front truck first so decided to use that as an excuse for a Christmas complete . The cleaver has a huuuuuge nose I'm excited about.
Old:
Orchard 8.75 eggy shape
Film 6.0 with krux dlk
Spitfire F4 conical 53mm 99a
Rockin rons

New:
Cleaver 8.38
Film 5.5 Leo Valls
Haze wheels 54mm 99a conical
Blurs bearings

[close]

Can I please get the specs on that Orchard eggy? I skate their shop popsicles typically, but if they drop that shape again I might give it a shot.

It's a clutch T1 shape. 8.75X32.25 14.25 WB. I have one and it measures about 8.5 wide over the front trucks and 8.25 over the back.

[jay_nev]

good call T1




edit i dont know when you embed using the "+Add image to post" option it crops it a bit - have to click for full image

[Seventyfrigginseven]

Expand Quote

Expand Quote

Weirdly hit axle on my front truck first so decided to use that as an excuse for a Christmas complete . The cleaver has a huuuuuge nose I'm excited about.
Old:
Orchard 8.75 eggy shape
Film 6.0 with krux dlk
Spitfire F4 conical 53mm 99a
Rockin rons

New:
Cleaver 8.38
Film 5.5 Leo Valls
Haze wheels 54mm 99a conical
Blurs bearings

[close]

Can I please get the specs on that Orchard eggy? I skate their shop popsicles typically, but if they drop that shape again I might give it a shot.

[close]

It's a clutch T1 shape. 8.75X32.25 14.25 WB. I have one and it measures about 8.5 wide over the front trucks and 8.25 over the back.

Thanks man!

[Freelancevagrant]

I’m in love with that orchard deck, how did you like it?

I really want to try a clutch t3

[Alex]

I’m in love with that orchard deck, how did you like it?

I really want to try a clutch t3

I'm enjoying it! Flips around very easy for the width. My only complaint is is the taper. 149s fit the nose perfectly but the tail was a bit skinny for them. Overall it skates like an 8.375.

I actually have a T3 deck too. Ended up being too big to trick on but makes a great cruiser. This photo shows the T3 on the left, 8.5 in the middle, and the Orchard football on the right

[munchbox]

Expand Quote

I’m in love with that orchard deck, how did you like it?

I really want to try a clutch t3

[close]

I'm enjoying it! Flips around very easy for the width. My only complaint is is the taper. 149s fit the nose perfectly but the tail was a bit skinny for them. Overall it skates like an 8.375.

I actually have a T3 deck too. Ended up being too big to trick on but makes a great cruiser. This photo shows the T3 on the left, 8.5 in the middle, and the Orchard football on the right

how is the wood and the kicks? might have to pick one up

[moonordie]

First Habitat in ages, back to good ol 8.5

[GoneWithTheSchwinn]

8.38 Killing Floor
Indy 149s, after market bushings
53mm Spitfire F4s
Bones Swiss six-ball
7/8 Allen bolts
free MOB grip

Vans Half-Cabs
Vans Gilbert highs

[Deletniez]

Girl 8.125 (G026)
F4 Conicals 52mm
Indy 139's
Bones Big Balls
Mob grip

Rocking some eS accel slims too

[Seventyfrigginseven]

Expand Quote

Expand Quote

I’m in love with that orchard deck, how did you like it?

I really want to try a clutch t3

[close]

I'm enjoying it! Flips around very easy for the width. My only complaint is is the taper. 149s fit the nose perfectly but the tail was a bit skinny for them. Overall it skates like an 8.375.

I actually have a T3 deck too. Ended up being too big to trick on but makes a great cruiser. This photo shows the T3 on the left, 8.5 in the middle, and the Orchard football on the right

[close]

how is the wood and the kicks? might have to pick one up

The wood is real good on Orchard shop decks.

[Sativa Lung]

Ya know, lately I've been under a lot of stress and I was doing some thinkin.. What can I do to counteract all the stress? Then it hit me... I needed to find some FUN. What could be more FUN than a football shaped deck? So I bought one.. But it wasn't FUN enough on its own. I still hadn't reached the level of FUN I was seeking. So I bought some vintage ventures and boy howdy were they FUN. But it still wasn't enough. I wasn't quite to the apex of FUN yet.. there was something missing. So I started to do some more thinking. It took me a while but all of a sudden I had an epiphany - tiny wheels! Like the ones people used to skate in the early 90s, which is scientifically proven to have been the most FUN era in the existence of mankind. Thus, I present to you - the pure, distilled essence of the very concept of FUN. FUN FUN FUN FUN IT'S SO FUN!

Blind 8.12 Brian Lotti reissue
Vinture 5.2s (original bushings and authentic lack of turning included)
Boardy Cakes 44mm fat bundts
GMN bearings
Black Magic
Jessup grip

[Seventyfrigginseven]

Ya know, lately I've been under a lot of stress and I was doing some thinkin.. What can I do to counteract all the stress? Then it hit me... I needed to find some FUN. What could be more FUN than a football shaped deck? So I bought one.. But it wasn't FUN enough on its own. I still hadn't reached the level of FUN I was seeking. So I bought some vintage ventures and boy howdy were they FUN. But it still wasn't enough. I wasn't quite to the apex of FUN yet.. there was something missing. So I started to do some more thinking. It took me a while but all of a sudden I had an epiphany - tiny wheels! Like the ones people used to skate in the early 90s, which is scientifically proven to have been the most FUN era in the existence of mankind. Thus, I present to you - the pure, distilled essence of the very concept of FUN. FUN FUN FUN FUN IT'S SO FUN!

Blind 8.12 Brian Lotti reissue
Vinture 5.2s (original bushings and authentic lack of turning included)
Boardy Cakes 44mm fat bundts
GMN bearings
Black Magic
Jessup grip

You have produced two of the best setups ever on here.

[kneebone]

that Lotti setup is perfect, makes me want to run out and get the exact same thing