Slap MessageBoards
Skateboarding => PHOTOS/VIDEO => Topic started by: Arto!Arto!WakeUp! on August 15, 2022, 06:09:55 AM
-
v good
https://www.youtube.com/watch?v=buwGAblXjds&t=3s
-
Yikes! there was some shit in there that surprised me
-
That was excellent, the spots alone are entertaining. Looking forward to the full vid
-
good stuff, some very creative tricks in there
-
Yeah, well the Tjerk Store called… they’re running outta you!
-
hey thanks! I filmed and edited this. nice to see it here. full video next week
-
wajo kk dik
-
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
-
Expand Quote
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
The kickflip nosemanual through the loop also had an egregious touch. Good part otherwise!
-
Expand Quote
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
ender is a grind and tbh, I don't see it touching, it's close but he's in the clear
same for the nosewheelie duck although that's even harder to tell
-
Expand Quote
Expand Quote
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
ender is a grind and tbh, I don't see it touching, it's close but he's in the clear
same for the nosewheelie duck although that's even harder to tell
If you watch it frame by frame ( , and . keys on youtube), you see him touching so hard the wheel pinches on the ender.
And on the nosemanny he's riding on the ground with all wheels for 4 frames.
-
Expand Quote
Expand Quote
Expand Quote
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
ender is a grind and tbh, I don't see it touching, it's close but he's in the clear
same for the nosewheelie duck although that's even harder to tell
If you watch it frame by frame ( , and . keys on youtube), you see him touching so hard the wheel pinches on the ender.
And on the nosemanny he's riding on the ground with all wheels for 4 frames.
don't wanna tell you how to live your life, but if you have to watch it frame by frame to see it, it's not worth worrying about.
-
Expand Quote
Expand Quote
Expand Quote
Expand Quote
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
ender is a grind and tbh, I don't see it touching, it's close but he's in the clear
same for the nosewheelie duck although that's even harder to tell
If you watch it frame by frame ( , and . keys on youtube), you see him touching so hard the wheel pinches on the ender.
And on the nosemanny he's riding on the ground with all wheels for 4 frames.
don't wanna tell you how to live your life, but if you have to watch it frame by frame to see it, it's not worth worrying about.
You don't have to, which is how I noticed it. But it's nice to check.
I don't like to be that guy either, but just accepting touching on manuals also feels very wrong. Especially in an edit that tries so hard to hide it by using slowmo right after touches.
-
haha i didn't try to hide a touch by making a slow mo afterwards. Had more to do with editting it to the music. the kickflip nosemanny doesn't have a touch i'm 100% sure but now you guys said it about the ender it makes me doubt a little on that one haha. I thought it was clean. Maybe its the filming angle. There is no sound to be found in the clip of a touch and he himself didn't feel anything from a touch. But yeah frame by frame it kinda looks like it now that you mention
-
haha i didn't try to hide a touch by making a slow mo afterwards. Had more to do with editting it to the music. the kickflip nosemanny doesn't have a touch i'm 100% sure but now you guys said it about the ender it makes me doubt a little on that one haha. I thought it was clean. Maybe its the filming angle. There is no sound to be found in the clip of a touch and he himself didn't feel anything from a touch. But yeah frame by frame it kinda looks like it now that you mention
Keeping it real. Thumbs up
-
Expand Quote
Expand Quote
Expand Quote
hey thanks! I filmed and edited this. nice to see it here. full video next week
Really nice video and no hate, but how did nobody care that he clearly touched on the ender manual? There are 2-3 frames fully touching. Always wondering how that stuff makes it to the final video, especially the last trick. And the slowmo starts exactly after the touch so there was a conscious decision.
ender is a grind and tbh, I don't see it touching, it's close but he's in the clear
same for the nosewheelie duck although that's even harder to tell
If you watch it frame by frame ( , and . keys on youtube), you see him touching so hard the wheel pinches on the ender.
And on the nosemanny he's riding on the ground with all wheels for 4 frames.
Once you’ve tried a fakie manny or switch backside nosegrind to a flip trick out, you will feel that you have to dip the board down a lot to get a proper flick off the ledge/curb, it looks like a touch, it might be a quick touch but it really dosent feel like it because your feet are still torqued in the manual/nosegrind position
-
Killer part, sick spot, thanks for posting.
I have never seen people complain here about manuals touching until Gifted Hater started talking about it and counting frames. He's obsessed by it.
-
I have never seen people complain here about manuals touching until Gifted Hater started talking about it and counting frames. He's obsessed by it.
Have you not been introduced to our lord and saviour, Weckingball?
-
I really didn't expect people on slap of all places to defend touching on manuals.
If a little touch still counts, when exactly does it stop counting? What's in the olympic rule book?
-
Killer part, sick spot, thanks for posting.
I have never seen people complain here about manuals touching until Gifted Hater started talking about it and counting frames. He's obsessed by it.
I would definitely critique a touch on a manual or a one truck grind trick in the middle, at the beginning and most of the time at the end of the ledge/manny pad.. but it’s just sort of different when you’re about to pop a flip trick or certain shove-it variations out of said trick, you have to dip your board down in some scenarios..
-
I’m all for detail-oriented critique, fair to point out sketchiness for sure, but there’s also having a sense for appropriate weights and measures. Crew of homies/independently produced video vs. commercial/professional video would also seem a relevant factor in assessing the severity of violation, no? If you’re making money off your tapped manuals I think there’s much more room for hard criticism
-
I’m all for detail-oriented critique, fair to point out sketchiness for sure, but there’s also having a sense for appropriate weights and measures. Crew of homies/independently produced video vs. commercial/professional video would also seem a relevant factor in assessing the severity of violation, no? If you’re making money off your tapped manuals I think there’s much more room for hard criticism
lol, is this Adam Smith's capitalist theory of manuals???
it doesn't matter if it's homies, pros, in a video, or just skating with friends... if it touches it's not a make, simple as that
-
Expand Quote
I’m all for detail-oriented critique, fair to point out sketchiness for sure, but there’s also having a sense for appropriate weights and measures. Crew of homies/independently produced video vs. commercial/professional video would also seem a relevant factor in assessing the severity of violation, no? If you’re making money off your tapped manuals I think there’s much more room for hard criticism
lol, is this Adam Smith's capitalist theory of manuals???
it doesn't matter if it's homies, pros, in a video, or just skating with friends... if it touches it's not a make, simple as that
I’m saying it not being a make isn’t as egregious, this is lesser of two evils theory
-
damn skating seems easy as shit for this kid. what’s the correct pronunciation of his name?
-
He has another part in a vans vid. Saw it yesterday, great video, coming out soon enough i presume
damn skating seems easy as shit for this kid. what’s the correct pronunciation of his name?
chair with a K at the end like work. Chairk.
-
He has another part in a vans vid. Saw it yesterday, great video, coming out soon enough i presume
Expand Quote
damn skating seems easy as shit for this kid. what’s the correct pronunciation of his name?
chair with a K at the end like work. Chairk.
good looks. i hate butchering peoples names.
-
this was dope, can vouch for the part in the new vans video, tjerk is a machine. someone recently told me he’s sitting on over 30 minutes of footage
-
full vid plus a little interview and gallery here:
https://essayskatemag.com/videos/premiere-interview-booticellyboys-aan-lager-wal/
-
Love the second song, I was listening to the soundtrack this morning
https://www.youtube.com/watch?v=8svf61tcFJc
-
https://www.youtube.com/watch?v=Djcqr7SxIAw
just saw the full vid pop up, it was uploaded a while ago but never posted i think