Slap MessageBoards
Skateboarding => Shoes & Gear => Topic started by: Frank and Fred on February 15, 2023, 02:08:02 PM
-
Let me see your Evil Beemers.
How much are they retail? and are they BBS or a special wood shop?
I'm getting old and fat like Gonz. Maybe I can learn backside lip slides on curbs? Probably not, but I am still tempted to hunt one down on SSD for the challenge...
-
BBS. Timestamp 1:25:41
https://youtu.be/FSftDo5xw28?t=5141
-
https://www.youtube.com/watch?v=hC0zNHqc__4
-
(http://i.ibb.co/1rD88fw/Beamer.jpg)
My beamie baby
-
longboard gateway drugs?
-
My Beamer boi:
https://www.instagram.com/p/CX6x9UEPI-K/?igshid=MDJmNzVkMjY=
I also picked up one of the Kevin Rodriguez beemers but haven’t set it up
-
it's like trying to ollie an ironing board, but lots of fun, especially on ramps.
-
(http://i.ibb.co/1rD88fw/Beamer.jpg)
My beamie baby
That's beautiful AF. Respect
-
(https://scontent-lcy1-1.xx.fbcdn.net/v/t1.15752-9/317690821_591043216118868_2090114215962142850_n.jpg?_nc_cat=102&ccb=1-7&_nc_sid=ae9488&_nc_ohc=lqPibVWr6bcAX8QK562&_nc_oc=AQkpDHJh8CgU8NhzSIsl8Ob3AL3d196GQxQ5YJ3Xgl3XNd4ec6oYPVyqU1nipUGHVCI&_nc_ht=scontent-lcy1-1.xx&oh=03_AdS0AeNlgM9g5curWP_dVQvUWKmBjGk-z0Dxq0G8S6Fadw&oe=64158CD2)
Here's mine, it was the blue/white/yellow stripey one but I can't stand the graphic.
-
(https://i.ibb.co/sRptrDM/700-C6535-1075-4-BFE-9-C28-7-DCED186-B9-D8.jpg) (https://ibb.co/sRptrDM)
This is the beemer 2
-
Beautiful Beemers. I hope they are getting used.
I think I'd use Thunder 181s if I had one.
-
Beautiful Beemers. I hope they are getting used.
I think I'd use Thunder 181s if I had one.
215's for sure, you trippin!
(neither of us will ever own one)
-
Expand Quote
Beautiful Beemers. I hope they are getting used.
I think I'd use Thunder 181s if I had one.
215's for sure, you trippin!
(neither of us will ever own one)
Clearly the right answer is 77s
(Smiles through the pain)
-
I was skating mine exclusively and got really used to it but it eventually made my go-to 8.5” board feel tiny. I have 215’s and 60mm wheels. Took a few bushing swaps to get it right
-
Special SSD release
https://www.instagram.com/p/CouhMHfrZpu/?igshid=NmE0MzVhZDY=
-
sorry for the dumb question, but how come these are so expensive / limited and hyped? seems like it would be a shame if you ended up loving the shape.
-
well, they probably take twice as long to route and sand as a regular board, then there's the mold, then ect....
-
a skateshop chain in my country has some of the ssd beemers on their online shop but they are selling for 3 times the cost of a regular board (like 200 usd) and I dont know if i can justify the purchase lol
-
a skateshop chain in my country has some of the ssd beemers on their online shop but they are selling for 3 times the cost of a regular board (like 200 usd) and I dont know if i cant justify the purchase lol
The MSRP on them is $125 , resellers usually post them for 300+… maybe your shop is splitting the difference… still pretty steep
-
Love the idea but I have accepted I really wouldn't use it that much. Good luck to those of you on the hunt tomorrow.
-
Expand Quote
a skateshop chain in my country has some of the ssd beemers on their online shop but they are selling for 3 times the cost of a regular board (like 200 usd) and I dont know if i cant justify the purchase lol
yeah ill skip on it, realized I would then end up needing 10" trucks and probably want to make it a christmas complete and be $500 in the hole hahah.
-
(https://i.ibb.co/THMd83Y/7-C9-E11-DA-0-E20-48-A1-9853-0-CC7-CA5-AB0-A5.jpg)
I got lucky and was able to get one. I did some frontside ollies on a ramp with it and they felt really cool. Some parks and spots I go to get a little boring, so I like to have a shaped board in the car to spice things up. I'm gonna need to switch to Thunder 181's asap though. I was fooled by the marketing; no matter what the stage, Indys just don't work right for me
-
(https://i.ibb.co/THMd83Y/7-C9-E11-DA-0-E20-48-A1-9853-0-CC7-CA5-AB0-A5.jpg)
I got lucky and was able to get one. I did some frontside ollies on a ramp with it and they felt really cool. Some parks and spots I go to get a little boring, so I like to have a shaped board in the car to spice things up. I'm gonna need to switch to Thunder 181's asap though. I was fooled by the marketing; no matter what the stage, Indys just don't work right for me
🔥❤️🔥❤️🔥❤️🔥
-
(https://i.ibb.co/THMd83Y/7-C9-E11-DA-0-E20-48-A1-9853-0-CC7-CA5-AB0-A5.jpg)
I got lucky and was able to get one. I did some frontside ollies on a ramp with it and they felt really cool. Some parks and spots I go to get a little boring, so I like to have a shaped board in the car to spice things up. I'm gonna need to switch to Thunder 181's asap though. I was fooled by the marketing; no matter what the stage, Indys just don't work right for me
Thunder pop is undefeated
-
I wanted one as a dog pulling sled but my homie gave me a nice sculpture cruiser deck. So I can't really justify the purchase. But would probably be great for those 25 mph mushers
-
Been wanting one for a while definitely hyped to finally get my hands on one. Gonna probably throw some bigger wheels on it
https://imgur.com/gallery/REE0q87
https://youtube.com/shorts/aDvbdmQcHEw?feature=share
-
Been wanting one for a while definitely hyped to finally get my hands on one. Gonna probably throw some bigger wheels on it
https://imgur.com/gallery/REE0q87
https://youtube.com/shorts/aDvbdmQcHEw?feature=share
Stoked to see one being ridden. The Jersey Barrier carve looked great on that thing and so did the kick flip.
-
Expand Quote
Been wanting one for a while definitely hyped to finally get my hands on one. Gonna probably throw some bigger wheels on it
https://imgur.com/gallery/REE0q87
https://youtube.com/shorts/aDvbdmQcHEw?feature=share
Stoked to see one being ridden. The Jersey Barrier carve looked great on that thing and so did the kick flip.
Thanks! it’s a really fun board for sure
-
Expand Quote
Been wanting one for a while definitely hyped to finally get my hands on one. Gonna probably throw some bigger wheels on it
https://imgur.com/gallery/REE0q87
https://youtube.com/shorts/aDvbdmQcHEw?feature=share
Stoked to see one being ridden. The Jersey Barrier carve looked great on that thing and so did the kick flip.
Right?!?
I love seeing it skated like its a just some regular set up.
Very much props.
Gnar'd.
-
Looks like another full size Beemer on the way in Fall.
-
Man, I wanted one for a while, then finally ordered one online and it was the mini version, it’s so short I took the trucks off and now it’s just another board in my closet. Kinda bummed
-
Man, I wanted one for a while, then finally ordered one online and it was the mini version, it’s so short I took the trucks off and now it’s just another board in my closet. Kinda bummed
the coupe is kinda disappointing.
pretty hard to mistake one for the other even in shop pics though.
-
Looks like another full size Beemer on the way in Fall.
hopefully they make as many as they did coupes? or you think the coupe just didn't sell well and that's why it looks like they made a lot?
-
Expand Quote
Man, I wanted one for a while, then finally ordered one online and it was the mini version, it’s so short I took the trucks off and now it’s just another board in my closet. Kinda bummed
the coupe is kinda disappointing.
pretty hard to mistake one for the other even in shop pics though.
Ehh not really, but the shop I ordered from didn’t have any sizing listed on their site, either way I’m bummed
-
The Coupe has no nose. It’s easy to tell them apart.
-
(https://i.ibb.co/THMd83Y/7-C9-E11-DA-0-E20-48-A1-9853-0-CC7-CA5-AB0-A5.jpg)
I got lucky and was able to get one. I did some frontside ollies on a ramp with it and they felt really cool. Some parks and spots I go to get a little boring, so I like to have a shaped board in the car to spice things up. I'm gonna need to switch to Thunder 181's asap though. I was fooled by the marketing; no matter what the stage, Indys just don't work right for me
buddy has this board with 181 thunders and I was able to pop a switch heel on it the other day. Felt fucking wild. Really fun board , pop shoves, manuals , fs airs all feel so cool .
-
I’ve been trying to get my hands on a Beemer for a couple years now but best I could do was the Ladybug and I can’t see myself setting it up. And the coupe definitely looks too small. (https://i.ibb.co/Fbk34dW/IMG-5957.jpg) (https://ibb.co/Fbk34dW)(https://i.ibb.co/ScVzyRy/IMG-5956.jpg) (https://ibb.co/ScVzyRy)(https://i.ibb.co/djpG42Q/IMG-5960.jpg) (https://ibb.co/djpG42Q)
-
I have the coupe. It’s kinda fun, but definitely not my favorite. Hope to get a full size one eventually
-
I picked up a coupe in the skate shop. Looked crazy short. I might try for the next drop. Thunder 181s for me. Those things are pretty damn light for their size.
-
Beamer coupe is even shorter than the zogger :o
Kinda feels like a rip off considering how similar they are and the Beamer is twice the price
-
Having both a Coupe and a Zog on ice right now, they’re not very similar in shape, and the expense in the Beamers come from the unique mold and the extra cutting/routing/finishing.
-
My Beamers
(https://i.imgur.com/898ZDp3.jpeg)
-
My Beamers
(https://i.imgur.com/898ZDp3.jpeg)
just got a baby beamer and can't decide between ace af1 77s or some indy 169s. I have both.
-
just got a baby beamer and can't decide between ace af1 77s or some indy 169s. I have both.
I think I've got the Classic 77's on my Baby Beamer with 3 washers on the inside of the wheel. The wheels are radial fulls. If you have a wider wheel the 169's would do but I'm a Ace man ace you can see
(https://imageshack.com/i/pmylEsPSj)
This is AWESOME!
I was thinking the other day before I knew about the baby beamer coming out, if Krooked made them more consistantly I could see myself just skating Beamers for the rest of my life
-
Baby Beemer shape looks so good.
-
(https://i.ibb.co/gRQNVHw/IMG-3400.jpg) (https://ibb.co/gRQNVHw) skated the coupe and cracked it after a week of skating it doing fliptricks and skating it like a regular board. Cant wait to get baby beemer boat in the streets this afternoon after work.
-
A deck shouldnt break after a week.
Its crazy that we just accept when boards break that easily.
That doesnt happen with any other product.
-
A deck shouldnt break after a week.
Its crazy that we just accept when boards break that easily.
That doesnt happen with any other product.
WHAT OTHER PRODUCT ARE YOU USING LIKE A SKATEBOARD YOU SICK FUCK
-
A deck shouldnt break after a week.
Its crazy that we just accept when boards break that easily.
That doesnt happen with any other product.
Broke at back truck by the router cut outs. Weaker zone of board. Duh
-
My point is if any other product we buy breaks after a week, we can get some kind of refund or a new product.
With deck we just accept it. It shouldnt be like this. Decks shouldnt break that easily.
-
My point is if any other product we buy breaks after a week, we can get some kind of refund or a new product.
With deck we just accept it. It shouldnt be like this. Decks shouldnt break that easily.
Take a toaster to the spot and throw it around then…
-
Expand Quote
My point is if any other product we buy breaks after a week, we can get some kind of refund or a new product.
With deck we just accept it. It shouldnt be like this. Decks shouldnt break that easily.
LMAO
-
I think the two or three times in my life that a board did break after a week I did get free replacement.
-
i've broken boards within 24 hours from setting up more than once and i never even tried to get a replacement, shit like that is bound to happen when you land weird.
-
BITD, I always use to baby new boards. Seemed like they were more vulnerable to breaking when they were brand new. They needed a bit of break in and flex... That meant no lipslides, 360 flips or big gaps for a week or so...
I haven't broken a board in years though... Board quality is better and I do way less high impact stuff. But, you still have to expect its possible and comes with the territory. Delams are another story....
-
Expand Quote
My point is if any other product we buy breaks after a week, we can get some kind of refund or a new product.
With deck we just accept it. It shouldnt be like this. Decks shouldnt break that easily.
This is funny
-
BITD, I always use to baby new boards. Seemed like they were more vulnerable to breaking when they were brand new. They needed a bit of break in and flex... That meant no lipslides, 360 flips or big gaps for a week or so...
I haven't broken a board in years though... Board quality is better and I do way less high impact stuff. But, you still have to expect its possible and comes with the territory. Delams are another story....
Same, still do for the first few hours. And have broken a freshie right on the wheel well; ofc my fault for doing that, but those wells do not hold out or flex, that's for sure. Having said that I have skated several Beamers including the coupe, but I was not flipping the coupe at all. The tail on that thing is just a massive rectangle as well. That, coupled with wells, plus flip tricks... -"Shit. Two tons of metal, 200 miles an hour, flesh and bone and plain old Newton..."
-
I never experienced wheel-wells being more prone to premature snap age but you're not the first person who has reported this.
I always broke boards in the middle of the deck or slightly back from the middle, usually on the heel side rail. Maybe a few tail breaks but that was due to very poor foot landing placement.
Those Beemers do look vulnerable for a couple of different reasons.
-
I think the two or three times in my life that a board did break after a week I did get free replacement.
Nice. I will try next time.
-
I don’t know if this is the correct place for this but I got a Beamer complete for sale. Indy 215s, 97 spits, Bronson bearings. I don’t know how to post pictures but I got it up on my eBay. Happy to sell it through slap if you PM me and I’ll knock a lil $ off.
Tbh I can’t get along with this board. The tail is just insane and that is coming from someone that loves weird ass board shapes… kudos to all the brothers n sisters that can skate these SOBs. https://www.ebay.com/itm/186893888152?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=chlXX5kSSaW&sssrc=4429486&ssuid=chlXX5kSSaW&var=&widget_ver=artemis&media=COPY
-
I don’t know if this is the correct place for this but I got a Beamer complete for sale. Indy 215s, 97 spits, Bronson bearings. I don’t know how to post pictures but I got it up on my eBay. Happy to sell it through slap if you PM me and I’ll knock a lil $ off.
Tbh I can’t get along with this board. The tail is just insane and that is coming from someone that loves weird ass board shapes… kudos to all the brothers n sisters that can skate these SOBs. https://www.ebay.com/itm/186893888152?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=chlXX5kSSaW&sssrc=4429486&ssuid=chlXX5kSSaW&var=&widget_ver=artemis&media=COPY
We have a Classifieds Section but here is a pic of your beemer
(https://i.ebayimg.com/images/g/JjoAAOSw6RpnhsPc/s-l1600.jpg)
Sick looking Beemer. I'm sad you're selling it.
Side note, Krooked is dropping a rad looking pair of new Beemers on Skate Shop Day.
-
Any one running 169s on the Baby Beamer? Or should use this as an excuse to order a set of 9.5 Slappys or Ace 77s...
-
Any one running 169s on the Baby Beamer? Or should use this as an excuse to order a set of 9.5 Slappys or Ace 77s...
169s sit flush on the Baby Beamer, wouldn't go wider.
-
I don't think is not beamer, but
(https://cdn11.bigcommerce.com/s-ae3w3/images/stencil/500x659/products/123604/241157/100230001KA10__63597.1737057517.jpg?c=2)
(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTDDrrGKETHJznTY2UoGtARX-OlHunBKjf6-A&s)
-
Expand Quote
Any one running 169s on the Baby Beamer? Or should use this as an excuse to order a set of 9.5 Slappys or Ace 77s...
Agreed. I set mine up with 215s and it hot rodded like crazy. Swapped them for Ace 66s and that’s been perfect for me (though I’m also running 58mm Radial fulls)
-
Thanks for the advice, here it is with 169s and 55mm lock in fulls
(https://i.ibb.co/N2CgLTf/IMG-2723.jpg) (https://ibb.co/N2CgLTf)
(https://i.ibb.co/wcxKKH7/IMG-2724.jpg) (https://ibb.co/wcxKKH7)
-
Thanks for the advice, here it is with 169s and 55mm lock in fulls
(https://i.ibb.co/N2CgLTf/IMG-2723.jpg) (https://ibb.co/N2CgLTf)
(https://i.ibb.co/wcxKKH7/IMG-2724.jpg) (https://ibb.co/wcxKKH7)
“Nobody puts Baby (Beamer) in a corner.” -Patrick Swayze (probably)
-
(https://i.ibb.co/fngfgLS/IMG-20250125-094542-HDR.jpg) (https://ibb.co/fngfgLS)
I have Ace 77 on mine, when skating you can't see the wheels looking down with those little 53 bones, and 60 Anderson nanos. I can actually measure it if you want.
-
The Baby Beamer is roughly 9.25 over the trucks, 169s with a wider wheel work well but I can see 77s or 9.5s being awesome as well.
Took it out for a quick hour sesh this morning and its a really fun board, think i had the best time on the slappy curb outside the park.
-
I think the baby Beamer is the one I need. The tail on the baby has a taper unlike the OG. On the OG beam I felt like I never knew where my back foot was.
Also thank you @too Frank to Fred for the the tech support.
-
set up a coupe with 215s awhile back, love it. Cut up some clear sweatpants grip for the top and it came out pretty nice I think...
(https://i.imgur.com/TmBxsO0.jpeg)
(https://i.imgur.com/g5yVPwR.jpeg)
(https://i.imgur.com/Mxum4pw.jpeg)
-
set up a couple with 215s awhile back, love it. Cut up some clear sweatpants grip for the top and it came out pretty nice I think...
(https://i.imgur.com/TmBxsO0.jpeg)
(https://i.imgur.com/g5yVPwR.jpeg)
(https://i.imgur.com/Mxum4pw.jpeg)
Sick! (and I generally hate clear grip)
-
Expand Quote
set up a couple with 215s awhile back, love it. Cut up some clear sweatpants grip for the top and it came out pretty nice I think...
(https://i.imgur.com/TmBxsO0.jpeg)
(https://i.imgur.com/g5yVPwR.jpeg)
(https://i.imgur.com/Mxum4pw.jpeg)
Sick! (and I generally hate clear grip)
There is no clear grip?
-
Grabbed a SSD Beamer today. Stoked to set it up! Ordered some 215s. Biggest trucks I have on hand are 9”. Thinking about seeing how insane they feel on the Beamer…
-
Grabbed a SSD Beamer today. Stoked to set it up! Ordered some 215s. Biggest trucks I have on hand are 9”. Thinking about seeing how insane they feel on the Beamer…
They do taper a bit more than you expect, I’m riding a baby Beamer which is 10.2” wide or something and my 10” trucks were hot rodding like crazy. 9” actually work way better so it probably won’t be so bad on a full size. But I’m also running 58mm radial fulls which help make up the size difference.
I also grabbed an SSD Beamer but my Indy 215s are currently on my horse pill so it may be a bit before I move them over
-
Expand Quote
Grabbed a SSD Beamer today. Stoked to set it up! Ordered some 215s. Biggest trucks I have on hand are 9”. Thinking about seeing how insane they feel on the Beamer…
They do taper a bit more than you expect, I’m riding a baby Beamer which is 10.2” wide or something and my 10” trucks were hot rodding like crazy. 9” actually work way better so it probably won’t be so bad on a full size. But I’m also running 58mm radial fulls which help make up the size difference.
I also grabbed an SSD Beamer but my Indy 215s are currently on my horse pill so it may be a bit before I move them over
Yeah I’m going to try it until my 215s come. I mean why the hell not? Very stoked on my first Beamer.
Edit: They don’t look too psycho.
(https://i.ibb.co/93rVxCSm/IMG-0141.jpg)
-
What does it mean for trucks to hot-rod? I got 215s o my Beamer coupe with no risers and 51ish wheels. I would like to know if I’m hot rodding haha
The SSD beamers are sick with the pearl paint. Gotta see em in person.
-
What does it mean for trucks to hot-rod? I got 215s o my Beamer coupe with no risers and 51ish wheels. I would like to know if I’m hot rodding haha
The SSD beamers are sick with the pearl paint. Gotta see em in person.
It just means your wheels are showing a bit when you look down on the board.
-
Still got a set if anyone is looking. A little bit less than what other shops are charging as well.
https://www.cassetteskateshop.com/products/krooked-gonz-love-hate-beamer-10-75 (https://www.cassetteskateshop.com/products/krooked-gonz-love-hate-beamer-10-75)
-
Still got a set if anyone is looking. A little bit less than what other shops are charging as well.
https://www.cassetteskateshop.com/products/krooked-gonz-love-hate-beamer-10-75 (https://www.cassetteskateshop.com/products/krooked-gonz-love-hate-beamer-10-75)
Thank you so much. I just purchased a set of them. I appreciate you!
-
Expand Quote
Still got a set if anyone is looking. A little bit less than what other shops are charging as well.
https://www.cassetteskateshop.com/products/krooked-gonz-love-hate-beamer-10-75 (https://www.cassetteskateshop.com/products/krooked-gonz-love-hate-beamer-10-75)
Thank you so much. I just purchased a set of them. I appreciate you!
Got it! Ill get them out tomorrow morning!
Thanks So much!
-
Expand Quote
What does it mean for trucks to hot-rod? I got 215s o my Beamer coupe with no risers and 51ish wheels. I would like to know if I’m hot rodding haha
The SSD beamers are sick with the pearl paint. Gotta see em in person.
It just means your wheels are showing a bit when you look down on the board.
ah yeah in that case I might as well be Rat Fink with the 215s on the coupe. It is kinda wild to look down at.
-
(https://i.imgur.com/AH0nSDq.jpeg)
So how’s everyone planning on gripping their beamers?? Honestly the top graphic is so good I think I’m just going to go clear grip. Not sure how the white ones look but the black pearlescent on top is great and the rails are dipped white too. I hate to cover it up. I *almost* hate to skate it….. almost.
-
Kinda Jelly of all your Beemers, especially now that Ace make an 88...
The ones that came out yesterday look sick. Enjoy and post some pics/ footie. I love seeing these things being used.
-
(https://i.imgur.com/us4LhsH.jpeg)
Big Board Little Board
Only had half a sheet of clear Mob and half a sheet of Black Mob and was just barely able to make it work. Should look better once it's skated a bit. Full size beamer is significantly larger than the Baby Beamer and the shape is noticeable different, specifically the tail is a lot squarer and it's much fuller over the front truck. Still very flat. Can't wait to get on it this weekend.
-
Big shout out to @BartHarleyJarvis for this Baby Beamer. Took it out for a solid sesh yesterday, it’s perfect for making the weird little park by my house more fun which was the use case I had in mind.
Currently running 77s and 60mm x99s, but may swap to 93 F4s.
(https://i.ibb.co/B2GtVPTG/IMG-9711.jpg)
-
Shout out BHJ on the stunner grip job.
Seent Barker at the spot, riding a full size beemer like it was 8.5 popsicle & made me question just how important the equipment actually is in so many of our cases.
Seems that when you’re good enough, a 2x4 will do (see: Chico Brenes) & when you’re not, it’s probably the fault of the pivot cup or some shit.
Had me rethinking what I thought I knew.
-
Shout out BHJ on the stunner grip job.
Seent Barker at the spot, riding a full size beemer like it was 8.5 popsicle & made me question just how important the equipment actually is in so many of our cases.
Seems that when you’re good enough, a 2x4 will do (see: Chico Brenes) & when you’re not, it’s probably the fault of the pivot cup or some shit.
Had me rethinking what I thought I knew.
Backing this assessment.
-
(https://i.ibb.co/h1CBBQcd/IMG-0315.gif) (https://imgbb.com/)
-
Big shout out to @BartHarleyJarvis for this Baby Beamer. Took it out for a solid sesh yesterday, it’s perfect for making the weird little park by my house more fun which was the use case I had in mind.
Currently running 77s and 60mm x99s, but may swap to 93 F4s.
(https://i.ibb.co/B2GtVPTG/IMG-9711.jpg)
I've seen what this man can do on a board, pray for this beamer. It's about to get ripped.
-
Word on them skreets is this MF Enrico is the TRUTH.
Too early for an RSVP for the soon to be battered Beemer?
-
Word on them skreets is this MF Enrico is the TRUTH.
Too early for an RSVP for the soon to be battered Beemer?
Guys guys I’m blushing over here.
If BHJ doesn’t send you his old Beemer first I’ll be sure to send the Baby up your way once I’ve skated it a while, we can get a sisterhood of the traveling Beemers going.
-
all this hype, bless us with some baby beamer park clips pls
-
all this hype, bless us with some baby beamer park clips pls
Unfortunately for you, I’m actually not that good and BHJ and Lou were just gassing me up.
http://youtu.be/S3vG7P1eBxY
Got some sun today and took the Beamer out for a little spin. Please excuse the helmet (old and clumsy) and terrible camera angles (lazy).
Threw some spitfire sapphires on, the long wb makes it a blast to cruise around the neighborhood with my son standing on the front.
-
Expand Quote
all this hype, bless us with some baby beamer park clips pls
Unfortunately for you, I’m actually not that good and BHJ and Lou were just gassing me up.
http://youtu.be/S3vG7P1eBxY
Got some sun today and took the Beamer out for a little spin. Please excuse the helmet (old and clumsy) and terrible camera angles (lazy).
Threw some spitfire sapphires on, the long wb makes it a blast to cruise around the neighborhood with my son standing on the front.
We stan a humble king
-
Expand Quote
Expand Quote
all this hype, bless us with some baby beamer park clips pls
Unfortunately for you, I’m actually not that good and BHJ and Lou were just gassing me up.
http://youtu.be/S3vG7P1eBxY
Got some sun today and took the Beamer out for a little spin. Please excuse the helmet (old and clumsy) and terrible camera angles (lazy).
Threw some spitfire sapphires on, the long wb makes it a blast to cruise around the neighborhood with my son standing on the front.
We stan a humble king
Lookin pretty good to me! Let’s get some more Beamer clips in this thread
-
Ender combo was sick!
-
Expand Quote
all this hype, bless us with some baby beamer park clips pls
Unfortunately for you, I’m actually not that good and BHJ and Lou were just gassing me up.
http://youtu.be/S3vG7P1eBxY
Got some sun today and took the Beamer out for a little spin. Please excuse the helmet (old and clumsy) and terrible camera angles (lazy).
Threw some spitfire sapphires on, the long wb makes it a blast to cruise around the neighborhood with my son standing on the front.
RIPPING
-
Got one yesterday and it’s crazy, I slipped just pushing on it lol such a long wheelbase but it’s very, very fun and an interesting ride. It’s like an ironing board with a bump in the middle! My ankle is kinda bunk right now but after five tries I was able to kickflip it haha. 215’s go real nice too, feel so locked in.
-
(https://i.ibb.co/jZyYwcfH/beamer.png)
Finally set her up.
Krooked Baby Beamer
Independent 169 Stage 11 "MFG in USA from US and imported parts", Riptide bushings
Powell G-Slides 85a 55mm
Zealous bearings
Enjoi Gender Benders 1"
Blue Tomato grip that I got for free with a different deck
-
There are still a few Skate Shop Day Beemers available in the UK. Slam City Skates have one on the wall, and I noticed other shops even have them reduced in price.
-
Just had the first sesh with the Baby Beamer.
It skates kinda like a normal board but everything takes so much power, exhausting.
A trainer board that makes you strong. :D
-
There are still a few Skate Shop Day Beemers available in the UK. Slam City Skates have one on the wall, and I noticed other shops even have them reduced in price.
In case anyone is looking, Embark in Maryland has one of the Love Beemers from SSD on their site. Great shop, great people.
-
(https://i.imgur.com/svlr2SO.mp4)
Beamer is an absolute feeble machine, something about locking onto the beam and the rail just makes it super stable.
Credit to @EXTRA SPICY on the filming, guy even makes me look good
-
(https://i.imgur.com/svlr2SO.mp4)
Beamer is an absolute feeble machine, something about locking onto the beam and the rail just makes it super stable.
Credit to @EXTRA SPICY on the filming, guy even makes me look good
My hero <3
-
(https://i.imgur.com/svlr2SO.mp4)
Beamer is an absolute feeble machine, something about locking onto the beam and the rail just makes it super stable.
Credit to @EXTRA SPICY on the filming, guy even makes me look good
Oh hell yeah!
-
(https://i.imgur.com/svlr2SO.mp4)
Beamer is an absolute feeble machine, something about locking onto the beam and the rail just makes it super stable.
Credit to @EXTRA SPICY on the filming, guy even makes me look good
I had a difficult time fitting that whole board in the frame. Large and in charge baybeeee.
-
I saw the dlxsf fall catalog yesterday and I see antihero have a really fun looking beemer shape on the way. Looks like a baby Beemer outline but 9.8” wide and 14.5” WB. Also wheel wells look sick and are similarly Routered properly for all 4 wheels.
Also some other really far out shapes on the way. Frank will be bombing hills with Levi Hawken…
-
Every time I see one of these boards I envision how badly I would get hurt trying to skate it.
-
I saw the dlxsf fall catalog yesterday and I see antihero have a really fun looking beemer shape on the way. Looks like a baby Beemer outline but 9.8” wide and 14.5” WB. Also wheel wells look sick and are similarly Routered properly for all 4 wheels.
Also some other really far out shapes on the way. Frank will be bombing hills with Levi Hawken…
oh no.
i stopped riding shaped boards 4 ish years ago. felt like the different shapes were causing even more consternation around truck/wheel choice, and then i’d like the look, but wasn’t loving the skate results.
right now i want a baby beemer or that tri-plane. maybe the tri-plane more. what the heck trucks fit the baby beemer/tri-plane?
what about this new shape?
scram used to mention the truck sizes for the shaped boards and i appreciated that
-
We’re raffling off a crispy BABY BEAMER set up with grip art by our local homie Alecia Vera
Tickets are $10 and all proceeds go towards our pocket plaza fundraiser goal.
https://www.instagram.com/reel/DK0DGnpvdY-/?igsh=d3djczRyYThsc3Bh
Tickets can be bought here
https://www.cassetteskateshop.com/products/krooked-baby-beamer-by-alecia-vera-raffle-ticket-10
(https://www.cassetteskateshop.com/products/krooked-baby-beamer-by-alecia-vera-raffle-ticket-10)
Thanks pals!
-
(https://i.ibb.co/bgrLG9xy/20250621-122230.jpg)
Shoutout @BALARGUE for selling me this an eternity ago. Was getting burned out skating my usual spots and decided to finally grip it. Running some OJs and Ace's and it's a sick ass cruiser. That W-concave felt weird at first, but you get used to it real quick. Cruised a bit, saw some cows in a river, did some flatground and stalls on a coarse ledge and it felt real nice. It was a pain to finally get one and fuck, I'm gonna have to buy another one in the future.
-
Does anyone know the width at the bottom where the trucks go, for the Diamond Quade? I can’t tell for sure, but it looks like Gonz had 169s on his in the Krooked IG posts.
-
Still in plastic Baby Beamer for sale if anyone is looking for one. HMU. Posted in classifieds, too.