Slap MessageBoards
Skateboarding => Shoes & Gear => Topic started by: moonordie on April 12, 2020, 10:40:19 AM
-
Well guys, the isolation (+ lack of skating) is messing with our already messed up minds and I know for a fact that many are putting together setups out from this boredom.
I want to see those covid setups
-
Rather than being a board I set up for covid this is the board I've been riding during covid.
My cruiser now turned everyday setup. With the parks closed I took to waxing a curb in my lot. I go down and slappy it everyday.
(https://scontent-ort2-1.xx.fbcdn.net/v/t1.15752-9/93061284_278617569842653_3349735166988779520_n.jpg?_nc_cat=109&_nc_sid=b96e70&_nc_ohc=jAgmBi2J9fgAX8w3UEP&_nc_ht=scontent-ort2-1.xx&oh=9cacabf3f0e37f63bd0486cadef88e75&oe=5EB81772)
SC Winkowski
Ace 55's
Spitfire Chargers - 80hd 58mm
Sector 9 abec 7
Bones ribs
-
Posted this in another thread last week but I feel it’s relevant here...
(https://i.imgur.com/4GZjYB1.jpg)
Lurks Houston 9.12
Thunder 149 w/ Thunder black 100du bushings
Speedlab 58mm 97a Danforths
Mini logo bearings
Krooked 1/4” risers
Shortys hardware
Mob
Some Adidas 3MC poking out at the bottom
-
That drawing is fucking nuts
-
No photo but just put together a shaped Ronnie Sandoval 8.25 Krooked
Indy 144’s I had
New Spitfire 80hd 56mm
Bones big balls and trying that new Jessup ultra .
I have a fucked up tendon or something on the outside of my front foot when I Ollie or flick so I’m taking it easy just pushing Around , but can’t wait to find a good curb to slappy with this
-
Since Covid... no skateparks and I don't feel like driving so I've been enjoying random cruises on this:
(https://i.imgur.com/jkZBVNV.jpg)
I pushed over 12 miles the other day, including hitting some rough banks and ledge spots along the way. Hit a DIY Jersey barrier on it yesterday and snagged a quick slasher.
(https://i.imgur.com/EsRpwIK.jpg?1)
I am now thinking of setting up a flat ground set up to get me through this bullshit. I have a Chocolate Tershy/ Couch deck on ice with a sub 14" wheelbase. I am going to set it up with Thunder 151s and some 54mm tablets in the next few weeks to try to relearn some flip trickery in the smooth car park a block from my house.
-
Since Covid... no skateparks and I don't feel like driving so I've been enjoying random cruises on this:
(https://i.imgur.com/jkZBVNV.jpg)
I pushed over 12 miles the other day, including hitting some rough banks and ledge spots along the way. Hit a DIY Jersey barrier on it yesterday and snagged a quick slasher.
(https://i.imgur.com/EsRpwIK.jpg?1)
I am now thinking of setting up a flat ground set up to get me through this bullshit. I have a Chocolate Tershy/ Couch deck on ice with a sub 14" wheelbase. I am going to set it up with Thunder 151s and some 54mm tablets in the next few weeks to try to relearn some flip trickery in the smooth car park a block from my house.
HOT POST
interested on your couch shape thoughts. Sub 14” would be my justification. Want something to cruise with big wheels once I go back outside. I just want to push.
You slash is sick
-
ha ha thanks. Will certainly post feedback on the Couch shape once I have it set up. I'm trying to hold off a bit to bur though my existing set ups, but I have a nice flat ground spot super close to my house, so we shall see....
-
Sick setup and photo. I'm all excited to skate tomorrow.
-
Since Covid... no skateparks and I don't feel like driving so I've been enjoying random cruises on this:
(https://i.imgur.com/jkZBVNV.jpg)
I pushed over 12 miles the other day, including hitting some rough banks and ledge spots along the way. Hit a DIY Jersey barrier on it yesterday and snagged a quick slasher.
(https://i.imgur.com/EsRpwIK.jpg?1)
I am now thinking of setting up a flat ground set up to get me through this bullshit. I have a Chocolate Tershy/ Couch deck on ice with a sub 14" wheelbase. I am going to set it up with Thunder 151s and some 54mm tablets in the next few weeks to try to relearn some flip trickery in the smooth car park a block from my house.
That is a great picture! Nice style man
-
I have a problem.
(https://imgur.com/gallery/biiuPqS)
-
Left my other board at my office which is locked down.
So I put this one together.
(https://i.postimg.cc/Y0w21FPs/Screen-Shot-2020-04-13-at-10-54-31-AM.png)
DOA Flat 8.5
Ace 44s
Spitfire 58mm Full Conical
Bronson Raw
Jessup Grip
Random bolts
-
I We have a problem.
(https://imgur.com/gallery/biiuPqS)
-
Expand Quote
I We have a problem.
(https://imgur.com/gallery/biiuPqS)
-
Expand Quote
I We have a problem.
(https://imgur.com/gallery/biiuPqS)
-
hot damn, that's a nice quiver
-
I have a problem.
(https://imgur.com/gallery/biiuPqS)
(https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/93273964_10220911623157098_3801673109300314112_n.jpg?_nc_cat=101&_nc_sid=ca434c&_nc_ohc=KdBWKrvzgT4AX_4mZ27&_nc_ht=scontent-sea1-1.xx&oh=00f77d39695f54a7af732821d3c81794&oe=5EBB505F)
-
Left my other board at my office which is locked down.
So I put this one together.
(https://i.postimg.cc/Y0w21FPs/Screen-Shot-2020-04-13-at-10-54-31-AM.png)
DOA Flat 8.5
Ace 44s
Spitfire 58mm Full Conical
Bronson Raw
Jessup Grip
Random bolts
How's the wheelbite without risers?
I'm thinking 57mm with Indy cast on a big board but already planning for diy wheelwells.
-
Expand Quote
Left my other board at my office which is locked down.
So I put this one together.
(https://i.postimg.cc/Y0w21FPs/Screen-Shot-2020-04-13-at-10-54-31-AM.png)
DOA Flat 8.5
Ace 44s
Spitfire 58mm Full Conical
Bronson Raw
Jessup Grip
Random bolts
How's the wheelbite without risers?
I'm thinking 57mm with Indy cast on a big board but already planning for diy wheelwells.
Not them, but I skated 56 conicals with ace trucks and didn’t have a problem. I get more wheelbite with Indy than ace tho.
-
Expand Quote
I have a problem.
(https://imgur.com/gallery/biiuPqS)
(https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/93273964_10220911623157098_3801673109300314112_n.jpg?_nc_cat=101&_nc_sid=ca434c&_nc_ohc=KdBWKrvzgT4AX_4mZ27&_nc_ht=scontent-sea1-1.xx&oh=00f77d39695f54a7af732821d3c81794&oe=5EBB505F)
Thanks, I don't feel as bad about my stash of unskated board anymore.
-
Expand Quote
I have a problem.
(https://imgur.com/gallery/biiuPqS)
(https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/93273964_10220911623157098_3801673109300314112_n.jpg?_nc_cat=101&_nc_sid=ca434c&_nc_ohc=KdBWKrvzgT4AX_4mZ27&_nc_ht=scontent-sea1-1.xx&oh=00f77d39695f54a7af732821d3c81794&oe=5EBB505F)
I don't have a camera capable of capturing the breadth of my mental illness, but from where I'm sitting I can see around 2 dozen full setups that I don't skate that often but have kept around for whatever reasons. Over by the door are the 4 or 5 I actually skate frequently and a handful of freshies that are on deck. Under my bed there's a stack of probably 15 that I'm either done with or didn't like that I always tell myself I'm going to sell but usually end up just giving away. Finally, on the other side of the room there's a couple boxes of new decks I don't plan on skating but I'm hoarding for various reasons.
Frankly it's pretty depressing.
-
Expand Quote
Expand Quote
Left my other board at my office which is locked down.
So I put this one together.
(https://i.postimg.cc/Y0w21FPs/Screen-Shot-2020-04-13-at-10-54-31-AM.png)
DOA Flat 8.5
Ace 44s
Spitfire 58mm Full Conical
Bronson Raw
Jessup Grip
Random bolts
How's the wheelbite without risers?
I'm thinking 57mm with Indy cast on a big board but already planning for diy wheelwells.
Not them, but I skated 56 conicals with ace trucks and didn’t have a problem. I get more wheelbite with Indy than ace tho.
Work has me busy – a problem I'm thankful for – so I haven't gotten to really ride it yet. Hoping to enjoy a quick solo flatland/curb sesh this weekend. Will report back when I do.
-
Expand Quote
Expand Quote
I have a problem.
(https://imgur.com/gallery/biiuPqS)
(https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/93273964_10220911623157098_3801673109300314112_n.jpg?_nc_cat=101&_nc_sid=ca434c&_nc_ohc=KdBWKrvzgT4AX_4mZ27&_nc_ht=scontent-sea1-1.xx&oh=00f77d39695f54a7af732821d3c81794&oe=5EBB505F)
I don't have a camera capable of capturing the breadth of my mental illness, but from where I'm sitting I can see around 2 dozen full setups that I don't skate that often but have kept around for whatever reasons. Over by the door are the 4 or 5 I actually skate frequently and a handful of freshies that are on deck. Under my bed there's a stack of probably 15 that I'm either done with or didn't like that I always tell myself I'm going to sell but usually end up just giving away. Finally, on the other side of the room there's a couple boxes of new decks I don't plan on skating but I'm hoarding for various reasons.
Frankly it's pretty depressing.
I’ve got some stuff as well. Probably 3 completed set up, stuff for another 2, few extra decks.
I don’t really skate. I was working too much, just to kinda scrape by, and now I’ve been staying inside with the whole shelter in place. Although I don’t think I’m at a high risk to give/get the covid, just pushing around, I’ve been trying to just stay low/inside, so as to do my part. Where I live people are out and about pretty frivolously, seeing an old guy skating down the street is the definition of unnecessary.
And now and I’m just trolling the nets looking at other boards. Not needed.
For me what’s depressing is that All of my shit is relatively old (I haven’t bought a board or parts in 6 ish months), but I’ve got enough to last me till the end of my life. One complete would do that. Like if I was some poor South American youth, I could make one of my completed last for the rest of my days.
I say all of that to offer some sympathy.
I have tried getting rid of stuff/giving away. I’ve gotten into a cycle where I’ll do that and then re buy same stuff. To that point I just don’t give away 8” trucks anymore, because i should know I’m going to circle back.
The only temporary ‘cure’/‘solution’ is to skate as much as possible and that’s just not happening these days.
Boo hoo
-
Expand Quote
Expand Quote
Expand Quote
I have a problem.
(https://imgur.com/gallery/biiuPqS)
(https://scontent-sea1-1.xx.fbcdn.net/v/t1.0-9/93273964_10220911623157098_3801673109300314112_n.jpg?_nc_cat=101&_nc_sid=ca434c&_nc_ohc=KdBWKrvzgT4AX_4mZ27&_nc_ht=scontent-sea1-1.xx&oh=00f77d39695f54a7af732821d3c81794&oe=5EBB505F)
I don't have a camera capable of capturing the breadth of my mental illness, but from where I'm sitting I can see around 2 dozen full setups that I don't skate that often but have kept around for whatever reasons. Over by the door are the 4 or 5 I actually skate frequently and a handful of freshies that are on deck. Under my bed there's a stack of probably 15 that I'm either done with or didn't like that I always tell myself I'm going to sell but usually end up just giving away. Finally, on the other side of the room there's a couple boxes of new decks I don't plan on skating but I'm hoarding for various reasons.
Frankly it's pretty depressing.
I’ve got some stuff as well. Probably 3 completed set up, stuff for another 2, few extra decks.
I don’t really skate. I was working too much, just to kinda scrape by, and now I’ve been staying inside with the whole shelter in place. Although I don’t think I’m at a high risk to give/get the covid, just pushing around, I’ve been trying to just stay low/inside, so as to do my part. Where I live people are out and about pretty frivolously, seeing an old guy skating down the street is the definition of unnecessary.
And now and I’m just trolling the nets looking at other boards. Not needed.
For me what’s depressing is that All of my shit is relatively old (I haven’t bought a board or parts in 6 ish months), but I’ve got enough to last me till the end of my life. One complete would do that. Like if I was some poor South American youth, I could make one of my completed last for the rest of my days.
I say all of that to offer some sympathy.
I have tried getting rid of stuff/giving away. I’ve gotten into a cycle where I’ll do that and then re buy same stuff. To that point I just don’t give away 8” trucks anymore, because i should know I’m going to circle back.
The only temporary ‘cure’/‘solution’ is to skate as much as possible and that’s just not happening these days.
Boo hoo
Hey. If anyone's got stuff to give away I'd take some Indy 149's, preferably hollow cast or Ti!
Would be will to trade for a deck that's in my too much stuff pile..
Sadly, I've got decks that sat around too long that they became "collectors items". Anyone want a Daryl Angel P2? It's gonna be hot on the collector market, right?
Enough product to last me? Maybe if I milked the decks but I don't have much in larger sizes. You're making think I should stock up a lil! Gonna need some more wheels.. hmm..
144p
What's the black shaped board at the bottom? I'm liking that big, square nose!
-
I'm not skating much right now but my 7 year old daughter asked me to teach her so she is cruising on one of my old completes. 7.625 Paul Rodriguez Plan B, 7.5" venture lows, spitfire 55.5s, random bearings. The wheels are obviously way too big but she doesn't weigh enough to get wheelbase cruising so it works for now.
-
What's the black shaped board at the bottom? I'm liking that big, square nose!
Those setups are mine. The black one at the bottom is a 9.25" Lib Tech Jamie Lynn Rat Tail. It's super poppy and uses their tech construction that makes it about the same weight as the 8" Mini Logo - and lighter than the 8" South Central pressed deck in the pic.
Lib Tech decks seem to be scarce, but more available in summer than winter - so keep an eye out for one.
-
Bought some Thunder 151s for my normal setup which I wasn't 100% into. My friend gave me a krooked that he had and painted over
(https://i.ibb.co/Fzqmwrt/IMG-2430.jpg)
https://www.conflictskates.co.uk/krooked-sphyke-ward-dan-drehobl-skateboard-deck-885-x-3225-145-wb-orange--free-grip-25692-p.asp
Originally was this board ^, shape feels great though the wheelbase measures out to be a tiny bit over 14.5. Should be a fun, non tech setup to mess around on.
Thunder 151 hollow lights, 54mm classic f4s, mini logo bearings
-
Just finished putting together my heated wheel-inspired project
https://www.instagram.com/p/B_CIRWolIU6/?igshid=cm3yqgdujcrb
Cut-down scavenged board
(Kept original wheelbase)
Scavenged trucks (penny trucks? Found them in the bushes at a skatepark a year ago)
Spitfire 80a and bones reds (off a second-hand board in a thrift store)
Only fresh gear was the bolts
-
Just finished putting together my heated wheel-inspired project
https://www.instagram.com/p/B_CIRWolIU6/?igshid=cm3yqgdujcrb
Cut-down scavenged board
(Kept original wheelbase)
Scavenged trucks (penny trucks? Found them in the bushes at a skatepark a year ago)
Spitfire 80a and bones reds (off a second-hand board in a thrift store)
Only fresh gear was the bolts
that grip job is sick
-
Bought some Thunder 151s for my normal setup which I wasn't 100% into. My friend gave me a krooked that he had and painted over
(https://i.ibb.co/Fzqmwrt/IMG-2430.jpg)
https://www.conflictskates.co.uk/krooked-sphyke-ward-dan-drehobl-skateboard-deck-885-x-3225-145-wb-orange--free-grip-25692-p.asp
Originally was this board ^, shape feels great though the wheelbase measures out to be a tiny bit over 14.5. Should be a fun, non tech setup to mess around on.
Thunder 151 hollow lights, 54mm classic f4s, mini logo bearings
Shape looks rad. It almost reminds me of a longer Brown Bomber.
-
Expand Quote
Bought some Thunder 151s for my normal setup which I wasn't 100% into. My friend gave me a krooked that he had and painted over
(https://i.ibb.co/Fzqmwrt/IMG-2430.jpg)
https://www.conflictskates.co.uk/krooked-sphyke-ward-dan-drehobl-skateboard-deck-885-x-3225-145-wb-orange--free-grip-25692-p.asp
Originally was this board ^, shape feels great though the wheelbase measures out to be a tiny bit over 14.5. Should be a fun, non tech setup to mess around on.
Thunder 151 hollow lights, 54mm classic f4s, mini logo bearings
Shape looks rad. It almost reminds me of a longer Brown Bomber.
Shape and paint very nice.
I was just making a similar whinge about wheels, so I’ll keep it going: some shaped boards 8.5 and down would be hot, 8” preferably, or less even. I’m sure there isn’t a huge market. Someone had a punk point that was small 10 years ago....welcome?
Anyways, looks like a fun board
-
Just finished putting together my heated wheel-inspired project
https://www.instagram.com/p/B_CIRWolIU6/?igshid=cm3yqgdujcrb
Cut-down scavenged board
(Kept original wheelbase)
Scavenged trucks (penny trucks? Found them in the bushes at a skatepark a year ago)
Spitfire 80a and bones reds (off a second-hand board in a thrift store)
Only fresh gear was the bolts
Damn, that's a lot of work. Kudos.
-
Expand Quote
Expand Quote
Bought some Thunder 151s for my normal setup which I wasn't 100% into. My friend gave me a krooked that he had and painted over
(https://i.ibb.co/Fzqmwrt/IMG-2430.jpg)
https://www.conflictskates.co.uk/krooked-sphyke-ward-dan-drehobl-skateboard-deck-885-x-3225-145-wb-orange--free-grip-25692-p.asp
Originally was this board ^, shape feels great though the wheelbase measures out to be a tiny bit over 14.5. Should be a fun, non tech setup to mess around on.
Thunder 151 hollow lights, 54mm classic f4s, mini logo bearings
Shape looks rad. It almost reminds me of a longer Brown Bomber.
Shape and paint very nice.
I was just making a similar whinge about wheels, so I’ll keep it going: some shaped boards 8.5 and down would be hot, 8” preferably, or less even. I’m sure there isn’t a huge market. Someone had a punk point that was small 10 years ago....welcome?
Anyways, looks like a fun board
Yup, standing on it feels good. Definitely the biggest board I've skated overall, should be a nice contrast with my 8.25 more 'serious' tech setup.
-
(https://i.imgur.com/PyicgnKl.jpg)
Real Kyle Walker 8.18
Venture 5.8
SML Wheels 52mm 97a, conical with a plastic core
Assorted bolts and bearings
Wasn't feeling the Real setup with Tensor Maglight ATG, WB was a tad too short, and I wanted to wear this board out till after this COVID shit blows over before I setup another board. Really feeling the difference in truck weight, I'll save the titaniums for another setup. But the pop is explosive when I can actually get the timing and force down. Loving the soft wheel on rougher asphalt, wish they were slightly bigger in a 54.
As you can see the curb I have is rough as hell; no amount of wax will save it and lots of elderly folk live around here so I don't want to paint it and cause them to slip and injure themselves.
I'm going to need help with slappies - I'm riding up with my feet wide apart, like in over the front and back bolts. Do I just semi-manual up to get my trucks to lock in?
-
1- find a better curb to learn on
2- wide stance is fine. You don’t want to lift the board at all tho. You want to quickly unweight the front front as let the front trucks bump on, then as you continue carving on,lighten up the tail and after that gets on get in the backseat for the grind.
-
Will rubbing that curb with brick help? And what about clear lacquer spray? There’s a curb thread in skate questions
-
Get in the backseat for the grind. 🤙🏼
-
Finally put together my covid setup. Is stuff that I wanted to try but wasn't sure to screw my setup. Also I liked the predominant white on this.
(https://i.imgur.com/LN1ZtKql.jpg)
(https://i.imgur.com/swqJXaNl.jpg)
Numbers 8.38
Jigsaw (local co) clear griptape
SJ 1" Allen
Ace 44
Bones STF 99 V4 54mm
Big balls
-
(https://i.imgur.com/PyicgnKl.jpg)
Real Kyle Walker 8.18
Venture 5.8
SML Wheels 52mm 97a, conical with a plastic core
Assorted bolts and bearings
Wasn't feeling the Real setup with Tensor Maglight ATG, WB was a tad too short, and I wanted to wear this board out till after this COVID shit blows over before I setup another board. Really feeling the difference in truck weight, I'll save the titaniums for another setup. But the pop is explosive when I can actually get the timing and force down. Loving the soft wheel on rougher asphalt, wish they were slightly bigger in a 54.
As you can see the curb I have is rough as hell; no amount of wax will save it and lots of elderly folk live around here so I don't want to paint it and cause them to slip and injure themselves.
I'm going to need help with slappies - I'm riding up with my feet wide apart, like in over the front and back bolts. Do I just semi-manual up to get my trucks to lock in?
You could paint just the edge, though that would still be slick with rain.
Could also wax it on hot days so it soaks in before you skate it.
Bs slappy..
Ride straight at a curb and kickturn to axle stall. That's the basic motion. Now try it at 45 degrees with some speed.
Front foot over the back bolts for me but completely over the bolts works too.
Back foot in the pocket, if you're picking up your front truck a lot scoot your foot forward.
Don't worry about getting in with your front truck first, just work on doing as low of a kickturn as possible to get up the curb. Let your feet/legs be realitively light/soft so your board still wanna ride up the curb. But you will wanna kinda jam it in to get the grind going. I think of slashing the lip like a surfer, there's probably some twisting/swinging of the hips going on but I'm not thinking about it.
If you ride out on top that's good, maybe try a lil less effort, umph.. Same thing if you end up leaning back too far and wanna no comply out (back back, not back towards your tail).
If you're getting stuck in feeble you're not putting enough into the kickturn and starting the grind. Same for those frustrating primo grinds!
Once you get the hang of the kickturn into a grind try to ride parallel but kinda far away from the curb.. lotsa speed, get tucked, think slashdawg, and frontside carve into the curb, then quick backside carve into the slappy.
A good lock-in will be the back truck butted up against the toe-side wheel. Or your back truck grinding right over the kingpin. This can look extra steezy in a slasher 80's way. And it'll wear a funky Gullwing groove into your back truck.
-
(https://i.imgur.com/0sQBTR5.png)
Keep it core out there.
https://www.emerica.com/us/apparel/accessories/other/emerica-face-mask-6140001202.html?utm_term=0_bed02d315d-c8a4975c9e-430497741&utm_campaign=c8a4975c9e-Emerica_COVID_Mask_4_18_2020_US&utm_medium=email&dwvar_6140001202_color=001&utm_source=Emerica
-
(https://i.imgur.com/0sQBTR5.png)
Keep it core out there.
https://www.emerica.com/us/apparel/accessories/other/emerica-face-mask-6140001202.html?utm_term=0_bed02d315d-c8a4975c9e-430497741&utm_campaign=c8a4975c9e-Emerica_COVID_Mask_4_18_2020_US&utm_medium=email&dwvar_6140001202_color=001&utm_source=Emerica
Will I get photo incentive for my instaclips?
-
(https://i.imgur.com/KwSA8RT.jpg)(https://i.imgur.com/RfWUvl0.jpg)
Isolation setup
Welcome football 8.8/14
ATG Mag 8.5
F4 99/52(?)
Big balls
First time in over a decade doing a sticker job. Came out a lil corny if you ask me lol but it’ll probably get trashed anyway. Waiting on clear grip in the mail for the middle and then I can go... do flatground and slap pies...
-
Posted this in another thread last week but I feel it’s relevant here...
(https://i.imgur.com/4GZjYB1.jpg)
Lurks Houston 9.12
Thunder 149 w/ Thunder black 100du bushings
Speedlab 58mm 97a Danforths
Mini logo bearings
Krooked 1/4” risers
Shortys hardware
Mob
Some Adidas 3MC poking out at the bottom
Did you do that graphic or did it already come on the board? Got a link?
-
(https://i.imgur.com/KwSA8RT.jpg)(https://i.imgur.com/hX6ZrDj.jpg)
Isolation setup
Welcome football 8.8/14
ATG Mag 8.5
F4 99/52(?)
Big balls
First time in over a decade doing a sticker job. Came out a lil corny if you ask me lol but it’ll probably get trashed anyway. Waiting on clear grip in the mail for the middle and then I can go... do flatground and slap pies...
I can't... Bolts covered by griptape I can't tttt
-
Expand Quote
(https://i.imgur.com/RfWUvl0.jpg)
Isolation setup
Welcome football 8.8/14
ATG Mag 8.5
F4 99/52(?)
Big balls
First time in over a decade doing a sticker job. Came out a lil corny if you ask me lol but it’ll probably get trashed anyway. Waiting on clear grip in the mail for the middle and then I can go... do flatground and slap pies...
I can't... Bolts covered by griptape I can't tttt
hahah they’re not that pic is before I put on the trucks
edit: changed the pic so you don’t have to close your eyes. still not convinced on the grip job...
-
Expand Quote
Expand Quote
(https://i.imgur.com/RfWUvl0.jpg)
Isolation setup
Welcome football 8.8/14
ATG Mag 8.5
F4 99/52(?)
Big balls
First time in over a decade doing a sticker job. Came out a lil corny if you ask me lol but it’ll probably get trashed anyway. Waiting on clear grip in the mail for the middle and then I can go... do flatground and slap pies...
I can't... Bolts covered by griptape I can't tttt
hahah they’re not that pic is before I put on the trucks
edit: changed the pic so you don’t have to close your eyes. still not convinced on the grip job...
Now I can breathe again
-
Expand Quote
Posted this in another thread last week but I feel it’s relevant here...
(https://i.imgur.com/4GZjYB1.jpg)
Lurks Houston 9.12
Thunder 149 w/ Thunder black 100du bushings
Speedlab 58mm 97a Danforths
Mini logo bearings
Krooked 1/4” risers
Shortys hardware
Mob
Some Adidas 3MC poking out at the bottom
Did you do that graphic or did it already come on the board? Got a link?
A local skater/artist who also does a small clothing line did the art. He’s @lurkshouston on Instagram. He seems to occasionally do one-off decks like this and Beantooth Skateshop sells them. I happened to see it when he posted a picture and really liked it. A couple days later I saw that the shop was selling it and DMed to swing by and get it. I wanted it for the art but had to skate it once I got it. The small nose and somewhat short WB makes it feel like a much smaller board; way different than any of the other stuff I’m riding these days.
-
(https://i.imgur.com/J7O53wu.jpg)
(https://i.imgur.com/NfdtcJI.jpg)
Skated the driveway for the first two weeks using my regular set-up. After that, we got bored and started skating around the neighborhood. I didn't have a good set up for the roads around here--a little rough. So I decided to buy some softer wheels and ended up buying a new deck, too.
This deck is fun for causing around the streets in our neighborhood and hitting up the elementary school up the street.
Polar--Nick Bosiero 9.75
Ace 55s
Spitfire 80HD 58mm
-
Ace 66, classic eagle 8.75, 1/4" risers and f4 classic 60's
Idk man, franken setup but yeet
-
If I had any money whatsoever I'd probably build a 7.75 setup to fuck around on or really big 10incher nh
-
(https://www.stil-laden.com/media/image/67/f6/73/Krooked-Skateboards-Drehobl-Bat-9-25.jpg)
Indy 169s, Spitfire OG Classics 54ish
Thought the bat graphic is kinda fitting...
-
Bats are the best animal they are always fitting
just kidding cats are the best
-
(https://www.stil-laden.com/media/image/67/f6/73/Krooked-Skateboards-Drehobl-Bat-9-25.jpg)
Indy 169s, Spitfire OG Classics 54ish
Thought the bat graphic is kinda fitting...
krooked is the simpsons of skateboarding
-
Kicked up and down the roads around this apartment I moved to... No ditches where I went, but found some decent curbs and 2 drops 3' or so
An abandoned carwash that has some nice sloped driveways to jump off of but it had people lurking around and using the shade..
66's on 8.75 is oddly nice af.. Never landed any fliptricks in my life tho
-
Kicked up and down the roads around this apartment I moved to... No ditches where I went, but found some decent curbs and 2 drops 3' or so
An abandoned carwash that has some nice sloped driveways to jump off of but it had people lurking around and using the shade..
66's on 8.75 is oddly nice af.. Never landed any fliptricks in my life tho
To be kind to yourself....not sure 66s have ever flipped, and if they have: it was gross.
-
That Boserio is gorgeous
-
Expand Quote
(https://www.stil-laden.com/media/image/67/f6/73/Krooked-Skateboards-Drehobl-Bat-9-25.jpg)
Indy 169s, Spitfire OG Classics 54ish
Thought the bat graphic is kinda fitting...
krooked is the simpsons of skateboarding
I like the simpsons
-
that last grip job is v nice
-
(https://i.imgur.com/pC49UzU.jpg)
Lockdown boredom parts bin build Covid cruiser.
Old Dane 1 9.75
Thunder 151
Ricta clouds 53
Streetplant rails
Rusty bolts and random bearings
-
No photo but just put together a shaped Ronnie Sandoval 8.25 Krooked
Indy 144’s I had
New Spitfire 80hd 56mm
Bones big balls and trying that new Jessup ultra .
I have a fucked up tendon or something on the outside of my front foot when I Ollie or flick so I’m taking it easy just pushing Around , but can’t wait to find a good curb to slappy with this
I'm riding that same setup just with 53mm 99a conical fulls and mob grip.
-
(https://i.imgur.com/0sQBTR5.png)
Keep it core out there.
https://www.emerica.com/us/apparel/accessories/other/emerica-face-mask-6140001202.html?utm_term=0_bed02d315d-c8a4975c9e-430497741&utm_campaign=c8a4975c9e-Emerica_COVID_Mask_4_18_2020_US&utm_medium=email&dwvar_6140001202_color=001&utm_source=Emerica
If it works as well as their shoes, you're probably dead already.
-
Iv been having fun with this on some rough banks and my flatbar and some curbs. Ive got an old pair if 149 indys on it but im thinking of getting some hi venture for it
(https://encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcRvYmvPoHVfZWFVsIA9QEM7xOuxf6zNUAx__DUvrCbvX6RzH1zL&usqp=CAU)
I also got one of these for if i feel like riding something different with some old 159 indys and 54mm f4s
(https://encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcRvTQknolOg-rcTilOeeiED32yHN87Qd7WwVjlNSsfDDcMunUX0&usqp=CAU)
-
Crosspost with the big boy thread,
Second covid setup
(https://i.imgur.com/KamSIxOl.jpg)
Baker 9" Kader Popsicle, stated as 9x33 WB: 15 but my measurements gave me 8.75x33.125 WB: 15
Local brand griptape called Jigsaw, pretty decent and the graphic doesn't bother me at all.
Venture 6.1 Kader ones.
Bones STF 99 V4 54mm with big balls.
-
Crosspost with the big boy thread,
Second covid setup
(https://i.imgur.com/KamSIxOl.jpg)
Baker 9" Kader Popsicle, stated as 9x33 WB: 15 but my measurements gave me 8.75x33.125 WB: 15
Local brand griptape called Jigsaw, pretty decent and the graphic doesn't bother me at all.
Venture 6.1 Kader ones.
Bones STF 99 V4 54mm with big balls.
this is beautiful.
-
(https://i.ibb.co/ctTMdfp/20210429-104303.jpg) (https://ibb.co/ctTMdfp)
Christmas complete that I setup mid February 21, been skating it as much as I can. I have an Ishod deck gripped and ready to setup soonish. Love this deck though.
REAL Mason Silva SOTY deck 8.06
Indy standard 139 wobbly loose
Spitfire F4 101 classics
Cortina bearings I think? Bronson G3's as backups
Shorty's hardware
Mob grip, all black
-
Last year when we first went into full lockdown in NZ, i had a bunch of new parts i was saving for when other parts were done, but just went fuck it we all might die anyway and set the shit up. Quasi 8.5 below, can't remember the name of the graphic. Independent titanium forged 159s, 53mm 99a f4 classics, bones swiss. Was basically my dream setup.
I have a sheet of clear mob grip that i use to customise the top on each deck so i know which end is which at a quick glance, used this sticker which I've had in my collection for 17 years.
(https://i.ibb.co/30h1Lxk/received-643310862894734.jpg) (https://ibb.co/mHzJMnS)
(https://i.ibb.co/JqSpFDS/received-239667390495659.jpg) (https://ibb.co/f9TNGjT)
There's a bunch of great mellow ledges and curbs, a steep driveway bank, a three stair, all within 100metres of my house. Skated it for two weeks then left it resting by my front door for 15min after a shopping trip, realised my mistake and it was gone. Still check the grip job on every skateboard I see or hear roll past, just in case I find the bastard
-
Last year when we first went into full lockdown in NZ, i had a bunch of new parts i was saving for when other parts were done, but just went fuck it we all might die anyway and set the shit up. Quasi 8.5 below, can't remember the name of the graphic. Independent titanium forged 159s, 53mm 99a f4 classics, bones swiss. Was basically my dream setup.
I have a sheet of clear mob grip that i use to customise the top on each deck so i know which end is which at a quick glance, used this sticker which I've had in my collection for 17 years.
(https://i.ibb.co/30h1Lxk/received-643310862894734.jpg) (https://ibb.co/mHzJMnS)
(https://i.ibb.co/JqSpFDS/received-239667390495659.jpg) (https://ibb.co/f9TNGjT)
There's a bunch of great mellow ledges and curbs, a steep driveway bank, a three stair, all within 100metres of my house. Skated it for two weeks then left it resting by my front door for 15min after a shopping trip, realised my mistake and it was gone. Still check the grip job on every skateboard I see or hear roll past, just in case I find the bastard
This story hurts me deeply.
-
Since Covid... no skateparks and I don't feel like driving so I've been enjoying random cruises on this:
(https://i.imgur.com/jkZBVNV.jpg)
I pushed over 12 miles the other day, including hitting some rough banks and ledge spots along the way. Hit a DIY Jersey barrier on it yesterday and snagged a quick slasher.
(https://i.imgur.com/EsRpwIK.jpg?1)
I am now thinking of setting up a flat ground set up to get me through this bullshit. I have a Chocolate Tershy/ Couch deck on ice with a sub 14" wheelbase. I am going to set it up with Thunder 151s and some 54mm tablets in the next few weeks to try to relearn some flip trickery in the smooth car park a block from my house.
Gnarly
-
Expand Quote
Since Covid... no skateparks and I don't feel like driving so I've been enjoying random cruises on this:
(https://i.imgur.com/jkZBVNV.jpg)
I pushed over 12 miles the other day, including hitting some rough banks and ledge spots along the way. Hit a DIY Jersey barrier on it yesterday and snagged a quick slasher.
(https://i.imgur.com/EsRpwIK.jpg?1)
I am now thinking of setting up a flat ground set up to get me through this bullshit. I have a Chocolate Tershy/ Couch deck on ice with a sub 14" wheelbase. I am going to set it up with Thunder 151s and some 54mm tablets in the next few weeks to try to relearn some flip trickery in the smooth car park a block from my house.
Gnarly
Woah, back when I used my last names... That board is long gone... Thanks for the reminder! Now I want another. That Jersey barrier is also now a homeless camp.
-
Last year when we first went into full lockdown in NZ, i had a bunch of new parts i was saving for when other parts were done, but just went fuck it we all might die anyway and set the shit up. Quasi 8.5 below, can't remember the name of the graphic. Independent titanium forged 159s, 53mm 99a f4 classics, bones swiss. Was basically my dream setup.
I have a sheet of clear mob grip that i use to customise the top on each deck so i know which end is which at a quick glance, used this sticker which I've had in my collection for 17 years.
(https://i.ibb.co/30h1Lxk/received-643310862894734.jpg) (https://ibb.co/mHzJMnS)
(https://i.ibb.co/JqSpFDS/received-239667390495659.jpg) (https://ibb.co/f9TNGjT)
There's a bunch of great mellow ledges and curbs, a steep driveway bank, a three stair, all within 100metres of my house. Skated it for two weeks then left it resting by my front door for 15min after a shopping trip, realised my mistake and it was gone. Still check the grip job on every skateboard I see or hear roll past, just in case I find the bastard
Too right. About 3 years ago, I left a newish set up and a cruiser in my car overnight. Somebody came along and picked the lock on my door and stole them. Hadn't even skated the cruiser yet. I did a black/clear between the bolts grip job because I liked the top graphic (long ass Dave Carnie poem) and to this day I check everybody's set up I pass on Venice Blvd looking for that weird grip job or somebody skating a Zig Zagger with black G Slides.