Slap MessageBoards

Skateboarding => Shoes & Gear => Topic started by: fs1/2cab on April 28, 2021, 01:36:34 AM

Title: Board Specs Help Thread
Post by: fs1/2cab on April 28, 2021, 01:36:34 AM
So I thought it would be a nice idea to help each other out if we are looking for specific deck specs and which woodshop/company does them. I'll start.

Width: 8.1 - 8.2
Wheelbase: 14 - 14.25
Length: 31.6 - 31.8
Concave: Mellow
Woodshop: everything, not sure about HLC quality tho

And of course ya all can kook me if that is stupid.
Cheers pals
Title: Re: Board Specs Help Thread
Post by: SneakySecrets on April 28, 2021, 02:43:17 AM
Brick House

36
24
36
Title: Re: Board Specs Help Thread
Post by: Sativa Lung on April 28, 2021, 03:10:12 AM
So I thought it would be a nice idea to help each other out if we are looking for specific deck specs and which woodshop/company does them. I'll start.

Width: 8.1 - 8.2
Wheelbase: 14 - 14.25
Length: 31.6 - 31.8
Concave: Mellow
Woodshop: everything, not sure about HLC quality tho

And of course ya all can kook me if that is stupid.
Cheers pals

Fuck. We might have to take this to PMs because that's in my wheelhouse and I've got a mental illness that requires me to try anything I find that fits. I can write 10 pages on this easy.

Right now, my number one recommendation would be the Scumco evan smith 8.25. There's some considerable stack variation (as with most PS board) but the bottom stack, most mellow ones are one of my favorite boards ever. That being said, PS wood doesn't last super long and it's not super stiff (which some people dislike), plus the kicks are pretty square, so if any of that isnt up your alley you might not love it.

So here's a few others off the top of my head that are high in my list.

DOA Flat as fuck (e mold) - hard to find right now, but there should be some coming out relatively soon. I personally prefer the 8.12 slightly but the 8.25 is fantastic too. South Central is thicker and stiffer than PS but it has tons of pop and lasts forever.

Blood Wizard 8.25 (PGI) - the new BW boards are clutch but theres still a fair bit of PGI out there so not hard to find. The PGI will be 31.63 length with a 14wb. Big nose for a short board, really nice mellow tail, good stiff wood (some people shit on it for being China wood but it's good enough that people mistake it for BBS a lot) that lasts a while.

Some of the flattest boards I've seen/skated have been the Toy Machine mellow mold PS ones, but the 8.25 usually has a 14.5 wb for some reason. I don't notice it as much on that shape as I do others though, and it's still really good. Unfortunately it's kind of a mess with toy machine boards from at least 4 diff woodshops in shops right now, so make sure it's PS. Alternatively, if you don't mind pink the Scumco Brian Downey board from the latest PS run is the toy machine mellow shape (including the long wb).

If you want something flat concave but medium kicks the Watson pressed tumyeto boards are good too. And of course there's always quasi and the scumco beall/Abair PS shapes. For BBS id say birdhouse is probably the best "mellow" (I don't consider any bbs molds truly mellow) one, and I think Element and Uma use that mold as well. There's also Pennswood silver spoon if you like heavier duty boards but it's kind of weird feeling for me, the tail feels steeper than the nose or something.

If any of these interests you and you need help tracking one down let me know. Any time I come across a board in my wheelhouse I bookmark it even if Im not currently looking for one. If that fails and you don't mind used boards I'm in the process of trimming down my ludicrously large stack, so if you (or anyone else) are in the states shoot me a message and we can possibly work something out.
Title: Re: Board Specs Help Thread
Post by: Sativa Lung on April 28, 2021, 09:12:51 AM
Oh yeah not sure if I'd really call this truly mellow either, but if you're the kind of fella who likes FUN the enjoi deedz 8.37 shape is pretty good too. Kicks are little steeper than I like. It skates like an 8.12 so don't worry about the width. Alternatively if you skate sub 8" boards regularly then the blind lotti showgirls reissue is the same thing just scaled down.
Title: Re: Board Specs Help Thread
Post by: fs1/2cab on April 28, 2021, 10:59:57 AM
Woah thanks for all the information @Buttfart Rapedick.
Will gnar you in 5 years when I reach ultimate pal status.

And I will look into that all. Is DOA stuff available in Europe? I loved that last video they put out.
And that deedz shape looks really fun I have to say. :)
Title: Re: Board Specs Help Thread
Post by: Xen on April 28, 2021, 11:10:26 AM
So I thought it would be a nice idea to help each other out if we are looking for specific deck specs and which woodshop/company does them. I'll start.

Width: 8.1 - 8.2
Wheelbase: 14 - 14.25
Length: 31.6 - 31.8
Concave: Mellow
Woodshop: everything, not sure about HLC quality tho

And of course ya all can kook me if that is stupid.
Cheers pals

I like a nice 8.18, here is what I found recently:

Sour 8.18x31.875x14.18WB - very mellow, roundedpointy
917 8.18x31.8ish 14.18WB - thick feeling (like SC) but it is a slick - medium
Palace Puig  8.2x31.875x14.25 WB steep kicks, mellow concave, typical DSM
Title: Re: Board Specs Help Thread
Post by: Frank on April 28, 2021, 01:17:04 PM
this will quickly turn into another nerd cave and i can't wait.

looking for something like this

width: 8.2-8.4
wb:14 or even under
length: under 32, preferrably around 31.5
shape: standard popsicle or egg/footballish
concave: more than mellow, but not exactly deep either. shallow, but curvy maybe? i like passport decks for example, but their wb is longer than 14
kicks: medium to mellow, don't like very steep kicks like hockey, fa, etc...
woodshop: pretty much anything, mainly concerned about dims and shape. if it has pop and lasts reasonably long that's fine. preferrably tho: bbs, dsm, pennswood or south central. not a ps fan, those things always feel heavy, waterlogged and soft after 3 seshs to me.

already know evisen and palace make 8.25s with a 14 inch wb and a shape i could probably deal with, but i wouldn't mind some alternatives if there are any.

@fs1/2cab you could check out baker og shapes. they come with a 14.25 wheelbase around those widths. i had a 8.25 that i would pretty much describe as mellow by all means, 14.25 wheelbase, a tad under 32 inches long. skated fine, but for me it was too mellow. i desperately tried to get used to very flat or mellow boards for some reason(nah, it's because they look cool in footage), but decided to cut my losses and move back to boards with a bit more bottom, after setting up an old one i'm not sure why i even bothered trying to skate flatter decks tbh.
Title: Re: Board Specs Help Thread
Post by: Sativa Lung on April 28, 2021, 03:59:15 PM
Woah thanks for all the information @Buttfart Rapedick.
Will gnar you in 5 years when I reach ultimate pal status.

And I will look into that all. Is DOA stuff available in Europe? I loved that last video they put out.
And that deedz shape looks really fun I have to say. :)

Ahhh you're EU, that makes my recommendations a lot less applicable. Sadly, DOA isn't available in any EU shops that I know of but I'll check with the owner and let you know. I know theres a shop in the UK that carried some at one point but its really expensive to ship stuff overseas when you're a small company like DOA so I don't think it became like a regular thing. There's some shops in Japan, but I'd imagine it would be cheaper to just import from the US if you were to go that route.

HLC has a decent "mellow" mold, Sour puts a few boards out on it usually. The last one I got was the Gustav "Love Gun" 8.25. It's still got kind of that spoony concave that other HLC decks do, except toned down a bit. I'd classify it as being closer to the medium end of the mellow spectrum. Good wood though, if they had one that was a little shorter I'd definitely fuck with it.
Title: Re: Board Specs Help Thread
Post by: peterpenis on April 30, 2021, 07:42:10 AM
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
Title: Re: Board Specs Help Thread
Post by: FrozenIndustries on April 30, 2021, 08:57:43 AM
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops

Anti-Hero's 8.62" shape is pretty much that, 14.75" WB and 32.56" overall. Slightly shorter, but...
Title: Re: Board Specs Help Thread
Post by: GardenSkater77 on April 30, 2021, 10:13:45 AM
Brick House

36
24
36

Only if she’s 5’3”.
Title: Re: Board Specs Help Thread
Post by: peterpenis on May 01, 2021, 12:26:45 AM
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Anti-Hero's 8.62" shape is pretty much that, 14.75" WB and 32.56" overall. Slightly shorter, but...

weirdly ive never seen that shape, thanks i'll look out for it. or maybe the 8.75 dlx shape. hopefully things are back to normal soon and you can actually choose what gear you want
Title: Re: Board Specs Help Thread
Post by: burm on May 01, 2021, 01:15:43 AM
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
Title: Re: Board Specs Help Thread
Post by: FrozenIndustries on May 01, 2021, 08:28:36 AM
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
Title: Re: Board Specs Help Thread
Post by: burm on May 01, 2021, 10:02:44 AM
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.

That’s good to know since I was considering the 8.375 or whatever version of this board today, so probably I need to see it in person before pulling the trigger.
Title: Re: Board Specs Help Thread
Post by: fs1/2cab on May 01, 2021, 10:15:37 AM
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
Title: Re: Board Specs Help Thread
Post by: Fhk on May 01, 2021, 10:56:02 AM
Expand Quote
Brick House

36
24
36
[close]

Only if she’s 5’3”.
https://giphy.com/gifs/ri921GJqIoHhS
Title: Re: Board Specs Help Thread
Post by: Spaced Cadet on May 01, 2021, 12:03:30 PM
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
Title: Re: Board Specs Help Thread
Post by: FrozenIndustries on May 01, 2021, 06:39:48 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
Title: Re: Board Specs Help Thread
Post by: fs1/2cab on May 02, 2021, 01:50:30 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
Title: Re: Board Specs Help Thread
Post by: Mbrimson88 on May 02, 2021, 02:32:18 AM
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Anti-Hero's 8.62" shape is pretty much that, 14.75" WB and 32.56" overall. Slightly shorter, but...
[close]

weirdly ive never seen that shape, thanks i'll look out for it. or maybe the 8.75 dlx shape. hopefully things are back to normal soon and you can actually choose what gear you want

There are a few around, but the cream classic eagle was the 8.6 shape, the white classic eagle which I have seen everywhere (in US shop instagram posts) is the 8.75 and a great all rounder for a big board.

Black Label also puts out a pretty good 8.6 popsicle (Jason Adams model) in each run and that seems to be fairly readily available too, as well as being BBS wood.

https://blacklabelskates.bigcartel.com/products


The Real 8.75 is fairly common and I have seen those in Australia, as well as US shop accounts - same as the white classic eagle, but specs vary slightly between different shops even though it is the same board.

Width (inches)   8.75
Length (inches)   32.75
Wheelbase (inches)   14.62


• Anti Hero Team Board
• Width 8.75"
• Length 32.5"
• Wheelbase: 14.625"


SPECS
SIZE   8.75
WIDTH (IN):   8.75
LENGTH (IN):   32.75
WHEELBASE (IN):   14.62
NOSE (IN):   7.25
TAIL (IN):   6.625
Title: Re: Board Specs Help Thread
Post by: FrozenIndustries on May 03, 2021, 06:08:19 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.
Title: Re: Board Specs Help Thread
Post by: Xen on May 03, 2021, 07:31:28 AM
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Anti-Hero's 8.62" shape is pretty much that, 14.75" WB and 32.56" overall. Slightly shorter, but...

Don’t forget about Black Label, they make some of the biggest/longest boards out.
Title: Re: Board Specs Help Thread
Post by: fs1/2cab on May 04, 2021, 01:16:39 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
[close]

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.

The Quasi site says
8.125 × 31.75 with a 14.125 wb

Got a head ups today from a pal and have one on my way, shoutout Lobby Skateshop (Hamburg).

I know ya all can't wait for my review, so I will let ya know. 😅
Title: Re: Board Specs Help Thread
Post by: Xen on May 05, 2021, 11:59:57 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
[close]

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.
[close]

The Quasi site says
8.125 × 31.75 with a 14.125 wb

Got a head ups today from a pal and have one on my way, shoutout Lobby Skateshop (Hamburg).

I know ya all can't wait for my review, so I will let ya know. 😅

Every Quasi I have ever owned has been about .25" shorter than what was listed (same goes for anything out of Sovereign Sect); Case in point, the 8.25 Proto is listed as 8.25" x 32.125" WB 14.25" but every one I've owned has always been around 31.8 ish give or take.
Title: Re: Board Specs Help Thread
Post by: Firebert on May 05, 2021, 12:06:03 PM
True, just got the new Justin Henry slick, site says: 8.375" x 32.25" WB 14.25"
PS Stix length measurement is done with the tape pressed down, so straight across length measured about 31.875"
Other measurements are on point. This one's tail is pretty flat too for those out there looking for medium flatness, this is a solid choice.
Title: Re: Board Specs Help Thread
Post by: fs1/2cab on May 05, 2021, 12:28:22 PM
When my math isn't off now..

31.5 and 31.75 is a difference of 5mm?


So what @Xen says.. AWS/Habitat decks are 0.25" shorter as they say? Is that also true in Europe?
Title: Re: Board Specs Help Thread
Post by: Frank on May 05, 2021, 01:13:05 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
[close]

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.
[close]

The Quasi site says
8.125 × 31.75 with a 14.125 wb

Got a head ups today from a pal and have one on my way, shoutout Lobby Skateshop (Hamburg).

I know ya all can't wait for my review, so I will let ya know. 😅

they need to put length and wheelbase on their site, seriously tho. but i'm glad you support them. they're the homies.
Title: Re: Board Specs Help Thread
Post by: Sativa Lung on May 05, 2021, 03:11:05 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
[close]

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.
[close]

The Quasi site says
8.125 × 31.75 with a 14.125 wb

Got a head ups today from a pal and have one on my way, shoutout Lobby Skateshop (Hamburg).

I know ya all can't wait for my review, so I will let ya know. 😅

Quasi/GX 8.12 is 31.25 tip to tip. I've even seen one that was slightly shorter at just over 31" (the Dick Rizzo Toy one with the blue dog on it) but I'm assuming that was just one of those weird ones you sometimes get where something is slightly off.

If you want 31.75 tip to tip with 14.25wb then get the 8.25. It's one of the better mellow tail'ed shapes that's widely available. Just beware that Quasi has recently been running two 8.25 shapes... the one I mentioned and then another that is a little longer (I think its right around 32" tip to tip, been a minute since I had one), has a 14.4 wb, and has a more tapered/less square shape. I've seen Bledsoe and Josh Wilson graphics on it. I don't think GX1000 does that one so if you want to make sure you get the 14.25wb one you could look for one of those, they're the same shapes and molds.
Title: Re: Board Specs Help Thread
Post by: Xen on May 05, 2021, 11:09:39 PM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
[close]

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.
[close]

The Quasi site says
8.125 × 31.75 with a 14.125 wb

Got a head ups today from a pal and have one on my way, shoutout Lobby Skateshop (Hamburg).

I know ya all can't wait for my review, so I will let ya know. 😅
[close]

Quasi/GX 8.12 is 31.25 tip to tip. I've even seen one that was slightly shorter at just over 31" (the Dick Rizzo Toy one with the blue dog on it) but I'm assuming that was just one of those weird ones you sometimes get where something is slightly off.

If you want 31.75 tip to tip with 14.25wb then get the 8.25. It's one of the better mellow tail'ed shapes that's widely available. Just beware that Quasi has recently been running two 8.25 shapes... the one I mentioned and then another that is a little longer (I think its right around 32" tip to tip, been a minute since I had one), has a 14.4 wb, and has a more tapered/less square shape. I've seen Bledsoe and Josh Wilson graphics on it. I don't think GX1000 does that one so if you want to make sure you get the 14.25wb one you could look for one of those, they're the same shapes and molds.

I blind bought that quasi shape assuming all quasi 8.25" were the proto shape (square) not a fan of the other 8.25"
Title: Re: Board Specs Help Thread
Post by: Pete W on May 06, 2021, 02:53:48 AM
So I thought it would be a nice idea to help each other out if we are looking for specific deck specs and which woodshop/company does them. I'll start.

Width: 8.1 - 8.2
Wheelbase: 14 - 14.25
Length: 31.6 - 31.8
Concave: Mellow
Woodshop: everything, not sure about HLC quality tho

And of course ya all can kook me if that is stupid.
Cheers pals

I had a Krooked Worrest (flower graphic) last summer
Fits your description, just a bit shorter at:
8.12" x 31.38"  w/ 14"wb
I really liked it, the nose and tail were almost identical in size with the nose being a little steeper and it felt mellow overall.

Only one i found atm between Krooked/Real/AH is the Real Classic Oval in red, might be worth keeping an eye out for that shape if you want dlx wood
Title: Re: Board Specs Help Thread
Post by: fs1/2cab on May 06, 2021, 04:58:55 AM
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
looking for a longer board, since I'm 6.6 and finally not a broke student anymore so i can buy something else than shop boards. the girl G056 looks interesting:

Width: 8.6″
Length: 32.625″
Wheelbase: 14.75″

but ideally from bbs or one of the good eu wood shops
[close]

Just saw this Quasi
https://wearecivil.com/shop/skate/deck/quasi-ply-2-deck-8-62/
8.625″ x 33″ WB 14.75″
[close]

Just a heads up, at least when I had one a few years ago that shape is closer to 32" since quasi measures length with the tape pushed in. Nose and tail were a lot smaller than I like so that board and I didn't get along too well.
[close]

So that 32" length Quasi have could actually be a bit shorter? Now I'm intrigued
[close]

Yeah I got a 8.5x33 14.5WB Quasi board and it was 32.25 measuring straight across. A pretty big 0.75 difference.
[close]

Just measured an old Quasi 8.5" in the shorter shape, the one that's listed as 32.125" with a 14.25" WB. Tip to tip, without pressing the tape it is actually 31.75".
[close]

Woah. 31.75 is the golden length for me. Is there a 8.125 version of that?
[close]

IIRC their 8.125 is actually even shorter, but I've never skated one.

Also worth mentioning that the 8.5 in that shape (at least the old one I have) tapers down to 8.25" over the back truck.
[close]

The Quasi site says
8.125 × 31.75 with a 14.125 wb

Got a head ups today from a pal and have one on my way, shoutout Lobby Skateshop (Hamburg).

I know ya all can't wait for my review, so I will let ya know. 😅
[close]

Quasi/GX 8.12 is 31.25 tip to tip. I've even seen one that was slightly shorter at just over 31" (the Dick Rizzo Toy one with the blue dog on it) but I'm assuming that was just one of those weird ones you sometimes get where something is slightly off.

If you want 31.75 tip to tip with 14.25wb then get the 8.25. It's one of the better mellow tail'ed shapes that's widely available. Just beware that Quasi has recently been running two 8.25 shapes... the one I mentioned and then another that is a little longer (I think its right around 32" tip to tip, been a minute since I had one), has a 14.4 wb, and has a more tapered/less square shape. I've seen Bledsoe and Josh Wilson graphics on it. I don't think GX1000 does that one so if you want to make sure you get the 14.25wb one you could look for one of those, they're the same shapes and molds.

Thanks pals. Ya all saved the day again.

But seriously.. 31.25 length? How short are the nose and tail on that?! I will see when I get that deck how I like it but the madness is ticking now.

I am currently on a Anti Hero 8.18.
Sticker says 31.875, with 14.38 wb.
But I measured like 31.8 and a 14.2 wb
So pretty perfect for me.
Title: Re: Board Specs Help Thread
Post by: Wonderful Whizzplank on May 06, 2021, 01:40:28 PM
Does anyone know how similar the DLX 8.75 is to the Darkroom 8.75? I'll take the minor difference in WB but nose & tail lengths and angles I'm more picky about
Title: Re: Board Specs Help Thread
Post by: Xen on May 31, 2021, 05:55:07 PM
Since NHS isn’t making their wide tip decks anymore (8.25x32x14.44WB) I’m trying to track down:

Full shaped or squareish tips (AWS/Hab/FA)
8.25 x 32 (or under)
14.3+ WB
Title: Re: Board Specs Help Thread
Post by: Ok on May 31, 2021, 07:09:52 PM
ISO ps stix, 8.5x14.25xless than 32. Prefer more flat. Please, and thanks.
Basically want like 20 more of the deck I have now, it’s light, great pop, feels perfect. Weirdly works with whatever trucks I put on it.
Title: Re: Board Specs Help Thread
Post by: TheCrimsonShroud on May 31, 2021, 10:34:49 PM
I’m still trying to figure out what kind of board I dig tbh. I have a skate warehouse blank in 8.25, 14”wb and fairly concave that I really dig, other than the steep ass kicks. No clue who made it. Then I have a very mellow Polar in 8.5 with a 14.5” wb. I really like the mellow kicks and square-ish shape, but the concave is so mellow I’m struggling. Pop is fantastic, pretty sure its BBS. If I could find a happy medium I’d be set.
Title: Re: Board Specs Help Thread
Post by: TheCrimsonShroud on June 03, 2021, 02:23:28 PM
I’m wondering about all the different shops now. Wish I could find out who makes the SWH blanks. Thinking about Dwindle boards for some reason, Girl specifically because their site is so in depth with shapes.
Title: Re: Board Specs Help Thread
Post by: OldCandy on June 03, 2021, 10:06:32 PM
size 8 - 8.5

concave - dont care, mellow is better
steepness - dont care, steeper is better
wheelbase - 13-14.5
nose and tail length - the longest possible
kicks - the fattest and fullest shape only

thanks pals
Title: Re: Board Specs Help Thread
Post by: Mbrimson88 on June 03, 2021, 11:25:22 PM
size 8 - 8.5

concave - dont care, mellow is better
steepness - dont care, steeper is better
wheelbase - 13-14.5
nose and tail length - the longest possible
kicks - the fattest and fullest shape only

thanks pals

I recall getting some Alien Workshop boards that were really good overall when standing on them, but then when I set it up, the wheelbase was shorter, so the kicks were super long so it felt all kinds of weird (and I like longer kicks too) so passed it on to someone else, who skated it to death and loved it.

Seems like more of the FA / Hockey boards are the same, I guess also the Quasi boards and a few like that, really square and steeper kicks which would be what you are into.

Title: Re: Board Specs Help Thread
Post by: FrozenIndustries on June 04, 2021, 05:52:29 AM
Expand Quote
size 8 - 8.5

concave - dont care, mellow is better
steepness - dont care, steeper is better
wheelbase - 13-14.5
nose and tail length - the longest possible
kicks - the fattest and fullest shape only

thanks pals
[close]

I recall getting some Alien Workshop boards that were really good overall when standing on them, but then when I set it up, the wheelbase was shorter, so the kicks were super long so it felt all kinds of weird (and I like longer kicks too) so passed it on to someone else, who skated it to death and loved it.

Seems like more of the FA / Hockey boards are the same, I guess also the Quasi boards and a few like that, really square and steeper kicks which would be what you are into.

I was running the 8.5" workshop shape a bunch a couple years ago. 14.125" WB with an overall length of 32.25" and a long, full nose and tail. They may have changed it, because someone posted their their recent alien measured shorter but these were nice and long.

FA and Quasi both tend to have short tails, though the FA/Hockey 8.18" shape has a 14" WB and a longer tail (longest of any of their shapes IIRC). Also very steep and full.
Title: Re: Board Specs Help Thread
Post by: Esmith5488 on June 04, 2021, 06:06:49 AM
size 8 - 8.5

concave - dont care, mellow is better
steepness - dont care, steeper is better
wheelbase - 13-14.5
nose and tail length - the longest possible
kicks - the fattest and fullest shape only

thanks pals
I feel like my friend ran the almost shape that’s steep kicks mellow concave . Might want to check around with them