Slap MessageBoards
Skateboarding => USELESS WOODEN TOY BANTER => Topic started by: donny2chugs on November 23, 2022, 08:03:04 PM
-
I wanted to use the collective mind of slap to figure out the standards for how much a spot can be manipulated in a pro part.
I prefer to see footage with almost no evidence of spot manipulation, but I realize this is idealistic and most spots need to be fixed to some extent. A moderate amount of bondo is standard and building fake features (especially when they aren't clearly DIYs) seems largely looked down upon. I personally hate seeing footage with big pieces of plywood used for drop ins and landings, but lots of pros do it. Drop in ramps seem clearly off limits, but somehow Wallenburg got a pass on that because Thrasher decided it was ok.
Thoughts? I assume this has been discussed at some point, but I couldn't find the thread.
-
https://youtu.be/edCqF_NtpOQ
-
Gold jacket. Green jacket
-
https://youtu.be/edCqF_NtpOQ
Is that the voice Steve Berra heard when he built his ledges?
-
Do as little as possible to get the trick. I agree on the plywood but sometimes you just gotta do it. People have hit clipper without plywood so when I see plywood there is a difference.
-
Expand Quote
https://youtu.be/edCqF_NtpOQ
Is that the voice Steve Berra heard when he built his ledges?
Lol that is the problem with that whole point of view. If you go to the limit you end up having to excuse, or maybe even respect berras spot making at least from a quality of product point of view.
-
I’m glad the trend of landing handrail tricks on plywood is over. Always ruined the trick.
If you can see the spot manipulation it ruins the clip.
-
I’m glad the trend of landing handrail tricks on plywood is over. Always ruined the trick.
If you can see the spot manipulation it ruins the clip.
So it's ok if you can't see it?
-
Greco used to drive around with a stair rail in his car. I forgot what video he used it in around 2010 before or after
Heard many other stories of getting a spot perfect before doing some epic shit
The Wizard was exposed from behind the curtain a long time ago. Enjoy the ride
-
Using concrete to create a small transition on a very steep bank in the street can be questionable. I can't think of any specific examples right now
-
Greco used to drive around with a stair rail in his car. I forgot what video he used it in around 2010 before or after
Heard many other stories of getting a spot perfect before doing some epic shit
The Wizard was exposed from behind the curtain a long time ago. Enjoy the ride
Was it his ender rail in the Deathwish video (switch dark slide?) it always looked like a fake rail to me, still love this part
http://youtu.be/eZGFLzmeq0w
-
Plywood is visually offensive but only when landing on it.
A plywood roll-in is fine.
-
Expand Quote
I’m glad the trend of landing handrail tricks on plywood is over. Always ruined the trick.
If you can see the spot manipulation it ruins the clip.
So it's ok if you can't see it?
I’ll give you an example. In lower Manhattan there is/was a cobblestone quarter pipe planter. When I watched tricks go down there I wondered how anyone could skate it. When I saw it in person there was thin set applied between the cobblestones to make it more skate-able. You don’t notice on video but this fix allows for better tricks to go down. Make sense?
-
Plywood is visually offensive but only when landing on it.
A plywood roll-in is fine.
Chris Dobstaff used a 4x6 sheet of plywood to make a gap after a kinked hubba in Subject To Change. It made the clip that much better
-
What if someone has already altered it? Take a sledge hammer to it to make it right?
-
there are no rules in skateboarding. just to not be a poser. ive learned that on tiktok.
-
Expand Quote
Greco used to drive around with a stair rail in his car. I forgot what video he used it in around 2010 before or after
Heard many other stories of getting a spot perfect before doing some epic shit
The Wizard was exposed from behind the curtain a long time ago. Enjoy the ride
Was it his ender rail in the Deathwish video (switch dark slide?) it always looked like a fake rail to me, still love this part
http://youtu.be/eZGFLzmeq0w
Grecos baker 3 part also features many of berras spots. People gave suciu shit for his mini rails but at least I don't think he made them himself. Mariano also had a few suspiciously small spots. Pause as he pops his switch 3 flip nosegrind in pretty sweet it looks like a tech deck spot. (still it's a switch 3 flip nosegrind so can't complain too much)
-
Drop in ramps seem clearly off limits, but somehow Wallenburg got a pass on that because Thrasher decided it was ok.
Thoughts? I assume this has been discussed at some point, but I couldn't find the thread.
Didn't the school ppl mod Wallenburg first by installing the disabled ramp in the upper run up?
I'd liken the Wallenburg drop in ramp to cutting the chain(s) of a rail. These mods get a pass cause they already been skated prior, so why let some some dumb lil deterrent or schoolyard renovations stop progression?
Sawcon rails definitely dungeon tier
-
idk for me its always "the more spots the better" so i say build ramps right up onto handrails like tyrone olson
i think you need to be open to criticisms but no one else did those t bone olson rails since... i thought they made for some cool clips in his part too some of the most talked about shit from that video
its obviously not as cool as doing it without the alteration. but think about it for a second. most of those cali spots you see on videos are absolutely perfect and are better than skatepark obstacles we have in canada / east coast. so when you see a trick out there vs. one done out here it should mean something to you. they even alter those a fuck ton , they bondo every single crack etc. so its absolutely perfect. the more i got into snowskating, the more i realized how important spot preparation is even on skateboard.
-
i used to adhere to the golf rule of "play it as it lies", but life is short. keep it subtle so you don't ruin the spot or make it a bust, otherwise go to town
-
I really don’t care. You could give me all the bondo and plywood help in the world I still wouldn’t be able to do any of this. Roll I scare fine too- the trick isn’t ability to push quickly.
The only thing I have a problem with is Berra trying to hide what he was doing. If you make it obvious to think it’s fine
-
Ricky Oyola has entered the chat
-
Are you not allowed to bondo cracks? Some cracks are just insurmountable, if it bothers you that much then buy a chisel, never heard of that and I grew up skating crust
-
It’s like the Supreme Court said about pornography, you know it when you see it.
But, the greatest thing about skateboarding is that there are no rules, nothing is off limits, it’s just you on your board having fun letting everything else slip away and you are there in that exact moment and every split second counts.
-
I found out that them there half pipes weren't already just there, and someone had to build those sonofaguns and I don't like it. Not one bit
-
i used to adhere to the golf rule of "play it as it lies", but life is short. keep it subtle so you don't ruin the spot or make it a bust, otherwise go to town
by this logic, then you cant even wax a ledge. i think rub brick, cement, bondo, wood, all that is fair game. people in LA build ramps right up onto the ledge and it gets a pass for fucks sakes. the line is drawn when you are faking tricks by hiding ramps etc.
even steve berras stuff is fine tbh its just a movie set skatepark. what is the difference of paying off a security guard at a spot so you can skate some perfect ass rail? ronnie creager basically did the exact same thing in menikmati and he gets a pass. daewons deca parts were all just in parking garages with benches he clearly brought there and they were amazing. its all about what you do with the spot, otherwise its hard for people to care about it. no one cared about steves tricks cause they were so standard. its like , you had the chance to skate there all day all night but that was all you could get as a professional? that doesnt seem very professional to me compared to daewon or ron. you can tell they logged ridiculous hours at those spots.
-
Expand Quote
i used to adhere to the golf rule of "play it as it lies", but life is short. keep it subtle so you don't ruin the spot or make it a bust, otherwise go to town
by this logic, then you cant even wax a ledge. i think rub brick, cement, bondo, wood, all that is fair game. people in LA build ramps right up onto the ledge and it gets a pass for fucks sakes. the line is drawn when you are faking tricks by hiding ramps etc.
even steve berras stuff is fine tbh its just a movie set skatepark. what is the difference of paying off a security guard at a spot so you can skate some perfect ass rail? ronnie creager basically did the exact same thing in menikmati and he gets a pass. daewons deca parts were all just in parking garages with benches he clearly brought there and they were amazing. its all about what you do with the spot, otherwise its hard for people to care about it. no one cared about steves tricks cause they were so standard. its like , you had the chance to skate there all day all night but that was all you could get as a professional? that doesnt seem very professional to me compared to daewon or ron. you can tell they logged ridiculous hours at those spots.
The Steve s.m thing comes up so often this is a decent enough take on it. Another example would be MJ yeah right and that's my all time fav part so yeah it's not fair. I think with so much time passed now it's best just to think of berras part as an experiment where we found the line of what's less accepted. Guy, jeron, Greco, Koston all also skated so.ilar or the same spots around the same time and copped it less.
-
Expand Quote
Expand Quote
Greco used to drive around with a stair rail in his car. I forgot what video he used it in around 2010 before or after
Heard many other stories of getting a spot perfect before doing some epic shit
The Wizard was exposed from behind the curtain a long time ago. Enjoy the ride
Was it his ender rail in the Deathwish video (switch dark slide?) it always looked like a fake rail to me, still love this part
http://youtu.be/eZGFLzmeq0w
Grecos baker 3 part also features many of berras spots. People gave suciu shit for his mini rails but at least I don't think he made them himself. Mariano also had a few suspiciously small spots. Pause as he pops his switch 3 flip nosegrind in pretty sweet it looks like a tech deck spot. (still it's a switch 3 flip nosegrind so can't complain too much)
I've always though about this, that spot looks suspiciusly too perfect and haven't seen it on any other video (as far I remember), but also isnt the only rail on the spot, I dont picture them placing 3 more rail just to make it more believable... but maybe they could
On this topic, I have the same feeling with a square rail Koston skates in FF right before the ender (sw back overcrook, nollie fs 180 to sw feeble back to regs... ), in this case it looks like the a "fake spot" cause it has two original round rails on the sides and they placed the square one right in the middle of the spot.
-
Expand Quote
Expand Quote
Expand Quote
Greco used to drive around with a stair rail in his car. I forgot what video he used it in around 2010 before or after
Heard many other stories of getting a spot perfect before doing some epic shit
The Wizard was exposed from behind the curtain a long time ago. Enjoy the ride
Was it his ender rail in the Deathwish video (switch dark slide?) it always looked like a fake rail to me, still love this part
http://youtu.be/eZGFLzmeq0w
Grecos baker 3 part also features many of berras spots. People gave suciu shit for his mini rails but at least I don't think he made them himself. Mariano also had a few suspiciously small spots. Pause as he pops his switch 3 flip nosegrind in pretty sweet it looks like a tech deck spot. (still it's a switch 3 flip nosegrind so can't complain too much)
I've always though about this, that spot looks suspiciusly too perfect and haven't seen it on any other video (as far I remember), but also isnt the only rail on the spot, I dont picture them placing 3 more rail just to make it more believable... but maybe they could
On this topic, I have the same feeling with a square rail Koston skates in FF right before the ender (sw back overcrook, nollie fs 180 to sw feeble back to regs... ), in this case it looks like the a "fake spot" cause it has two original round rails on the sides and they placed the square one right in the middle of the spot.
Yeah I also think that was a specially made rail. From memory it maybe had a base you could see was bolted down. I think the only other trick on it was Mikey Taylor who at that time was another Berrics regular
-
Someone bondo’d an entire runway up to that Manhattan ollie over top handrail spot. I’d really like to know who did it. It’s a fucking hilarious amount of bondo.
-
Someone bondo’d an entire runway up to that Manhattan ollie over top handrail spot. I’d really like to know who did it. It’s a fucking hilarious amount of bondo.
seems like you would be better off to just use cement at the point. but i guess its such a busy spot it would take too long to dry and poeple might step in it and shot
-
I prefer disclosure to deception. Do what needs to make it skateable but don't pretend that it's the same if someone is dissenting. Just accept changes were made. No need to rationalize. Keep footnotes for your bibliography.
-
What if someone has already altered it? Take a sledge hammer to it to make it right?
I can't remember if someone told me this, or I read it, but I have a recollection of a story about Phelps smashing out the pool coping someone added to the deep end at Buena Vista pool.