The Set-up Thread

[Mmmdonutss94]

Expand Quote

7.75 w/ 31.25” length and 14.5” WB
5.0 venture low hollow Tito’s
50mm slim bones 99a

[close]

Fixed it . That beauty should not hide behind a link. 14.5" WB on a 31.25" deck sounds crazy though. How does it feel?

I’m not a huge fan of it tbh but I’m also dealing with an extreme case of the madness right now. The wheel base makes tres super hard.

[Gandito405]

Anti-Hero classic eagle 8.75, 14.75, ace hollow 66 (9"), bones swiss, full conical 97a 58mm, 1/8 risers, dremeled wheel wells (uneven). trucks rode loose without bottom washer

[VCR]

Big Rizzo 8.25
V-cast 5.6
Formula Four 54mm

[Mcidraque]

Expand Quote

Expand Quote

Western Edition 8.125
Venture 5.2 V-Lights
Ricta 101a 53mm

NB# 288S

[close]

one of the best setups I've seen with that DLX sticker
So good to see Western Edition still kicking!





Y'all remember these old DLX stickers? Had to throw one on this special board.

Krooked Frank guest board 8.28
Royal 144s
Loophole 54s

[close]

amazing whip. was eyeing the other day one online but the tail lenght (at least what the website said) was a little short for me to finally pull the trigger.

Could you help this pal madness by measuring the tail?
cheers!

[Mcidraque]

Expand Quote

Expand Quote

Y'all remember these old DLX stickers? Had to throw one on this special board.

Krooked Frank guest board 8.28
Royal 144s
Loophole 54s

[close]

I had so many of those stickers and the Nate Jones Tre flip ones. Gonna have to go hunting for some of those and an Anti Hero can cover now

[close]

Damn, never got the Nate Jones ones. I nabbed this one from a Van Wastell wall board as I took it out of the shrink. RIP Van.

Expand Quote

Expand Quote

Expand Quote

Expand Quote

[close]

one of the best setups I've seen with that DLX sticker



Y'all remember these old DLX stickers? Had to throw one on this special board.

Krooked Frank guest board 8.28
Royal 144s
Loophole 54s

[close]

[close]

amazing whip. was eyeing the other day one online but the tail lenght (at least what the website said) was a little short for me to finally pull the trigger.

Could you help this pal madness by measuring the tail?
cheers!

[close]

6.4″. First time measuring tail specs so take it with a grain of salt. Feels good to me, though!

thx a lot. i'm usually on the regular dlx 8.06 (tail is a hair longer than that) so maybe some last minute santa is coming my way 

[mrosk8]

Quasi Acid Ply 8.375
Slappy trucks 8.5 (nice turn and bushing )
Haze Wheels 52mm
Pusher Bearings ceramics

Last resort VM001 high

[roba]

7.75 w/ 31.25” length and 14.5” WB

wild dimensions

[Bristol_Palin]

Had this one on ice for a while. I like it a lot. it's my first not PS Stix 8.5 x 32.125 x 14.25 boxy shape in a few years. Skated lots of quasi, GX1000 and snack boards for the past few years. I love that shape. This shape isn't that different and it's bbs.

Hockey 8.5 x 31.91 x 14.25
Venture 5.8
58 mm F4 Spitfire OG classic shape
Reds
Nutass (from the faboles camp) 7/8s allen hardware
Jessup

[Ok]

Had this one on ice for a while. I like it a lot. it's my first not PS Stix 8.5 x 32.125 x 14.25 boxy shape in a few years. Skated lots of quasi, GX1000 and snack boards for the past few years. I love that shape. This shape isn't that different and it's bbs.

Hockey 8.5 x 31.91 x 14.25
Venture 5.8
58 mm F4 Spitfire OG classic shape
Reds
Nutass (from the faboles camp) 7/8s allen hardware
Jessup

very nice

[easymoneysniper]

Had this one on ice for a while. I like it a lot. it's my first not PS Stix 8.5 x 32.125 x 14.25 boxy shape in a few years. Skated lots of quasi, GX1000 and snack boards for the past few years. I love that shape. This shape isn't that different and it's bbs.

Hockey 8.5 x 31.91 x 14.25
Venture 5.8
58 mm F4 Spitfire OG classic shape
Reds
Nutass (from the faboles camp) 7/8s allen hardware
Jessup

man that shit looks good. so fresh and so clean clean

[GoneWithTheSchwinn]

Had this one on ice for a while. I like it a lot. it's my first not PS Stix 8.5 x 32.125 x 14.25 boxy shape in a few years. Skated lots of quasi, GX1000 and snack boards for the past few years. I love that shape. This shape isn't that different and it's bbs.

Hockey 8.5 x 31.91 x 14.25
Venture 5.8
58 mm F4 Spitfire OG classic shape
Reds
Nutass (from the faboles camp) 7/8s allen hardware
Jessup

Palace sticker on a Hockey board has my skate OCD going nuts. Do you also skate in Emericas but wear a Vans sweatshirt?

[LebowskisRug]

do you also find it weird if someone puts a shop sticker on a board they didn't get at said shop?

[Bristol_Palin]

Expand Quote

Had this one on ice for a while. I like it a lot. it's my first not PS Stix 8.5 x 32.125 x 14.25 boxy shape in a few years. Skated lots of quasi, GX1000 and snack boards for the past few years. I love that shape. This shape isn't that different and it's bbs.

Hockey 8.5 x 31.91 x 14.25
Venture 5.8
58 mm F4 Spitfire OG classic shape
Reds
Nutass (from the faboles camp) 7/8s allen hardware
Jessup

[close]

Palace sticker on a Hockey board has my skate OCD going nuts. Do you also skate in Emericas but wear a Vans sweatshirt?

Lol I think I started doing this because I heard people on here complain that it drives them nuts. I like to put multiple different board brands on the board I’m riding. My last few had palace and frog stickers.

I haven’t skated in emericas in years. I prefer the ugg lower slipper to the heath kirchart 2. Worse heel lock but all around skates better. Definitely not as durable but better flick and board feel.

The first Romero shoe I did really like

Also I only skate in a tuxedo

[pops]

Expand Quote

7.75 w/ 31.25” length and 14.5” WB

[close]

wild dimensions

Something went horribly wrong in the process.

[dr.prestige]

do you also find it weird if someone puts a shop sticker on a board they didn't get at said shop?

I do that because i have two different locals i frequent that have two mostly different stocks of skate shit to pick from. One is in the town I grew up in, one is in the town I currently live in close proximity to. I still give both establishments my money and I’m still friends with the people that work at each one so I put both stickers on my board, we can all live in peace and harmony with one another

[gaunting]

Palace powers 8.0” 31.6” 14.2” WB
Indy forged 139 (had the IKP ones, I hate them though.)
Spitfire 54 classic 53mm
Shake junt 7/8” allen
Bones super reds bearings
Black Magic grip

[tom]

8.25 WKND
Mixed up some f4 classics
Freshly cleaned and lubed Swiss
Thunder team hollow 148’s

[gaunting]

8.25 WKND
Mixed up some f4 classics
Freshly cleaned and lubed Swiss
Thunder team hollow 148’s

crazy graphic. and I like the one swirl wheel. 😮‍💨⛽️

[Ok]

Expand Quote

8.25 WKND
Mixed up some f4 classics
Freshly cleaned and lubed Swiss
Thunder team hollow 148’s

[close]

crazy graphic. and I like the one swirl wheel. 😮‍💨⛽️

agree that whole kit might do


very nice

[Richard Skidder]

Expand Quote

Expand Quote

8.25 WKND
Mixed up some f4 classics
Freshly cleaned and lubed Swiss
Thunder team hollow 148’s

[close]

crazy graphic. and I like the one swirl wheel. 😮‍💨⛽️

[close]

agree that whole kit might do


very nice

Is that a little axle peaking through? <3

[VCR]

Looking good tom! What 8.25 shape is that one?

[tom]

It’s their standard 8.25, so the real full nose and tail shape. There’s maybe a couple inches of axle peaking through. I’m trynna see if I can grind through the hollow axle. I took a pretty bad slam onto my shoulder today so I might be out of commission for a little bit. I’m hoping it’s nothing though and I’ll have some sort of Christmas miracle and be able to skate within a few days

[Safariferrari]

Palace powers 8.0” 31.6” 14.2” WB
Indy forged 139 (had the IKP ones, I hate them though.)
Spitfire 54 classic 53mm
Shake junt 7/8” allen
Bones super reds bearings
Black Magic grip

would be nicer if u had a hockey sticker on it

[Bristol_Palin]

Expand Quote

Palace powers 8.0” 31.6” 14.2” WB
Indy forged 139 (had the IKP ones, I hate them though.)
Spitfire 54 classic 53mm
Shake junt 7/8” allen
Bones super reds bearings
Black Magic grip

[close]

would be nicer if u had a hockey sticker on it

Depending on where you live I have one I can send you

[Richard Skidder]

It’s their standard 8.25, so the real full nose and tail shape. There’s maybe a couple inches of axle peaking through. I’m trynna see if I can grind through the hollow axle. I took a pretty bad slam onto my shoulder today so I might be out of commission for a little bit. I’m hoping it’s nothing though and I’ll have some sort of Christmas miracle and be able to skate within a few days

Here’s to your shoulder healing and your axle peaking. Cheers and happy Holidays.

[gaunting]

Expand Quote

Palace powers 8.0” 31.6” 14.2” WB
Indy forged 139 (had the IKP ones, I hate them though.)
Spitfire 54 classic 53mm
Shake junt 7/8” allen
Bones super reds bearings
Black Magic grip

[close]

would be nicer if u had a hockey sticker on it

😝

[FatGuy92]

Krooked 8.06
Thunder 147 lights
52mm classics
Blazers

[Badandoldskater]

Hello




Had to edit cuz I didn’t post specs

Wide boy
Ace 80s
Spit tfunk 60s 97a
Skf oski bearings
Ace hardware I bought from someone here

I’m gonna have to add a riser pad cuz I’m a dolt

[kitcatski]

Generator blank 8.25
Indy titanium 149
Bones hard bottom bushing, bones medium top
54mm F4 classics
Swiss 6
Pepper Galaxy Grip
Shorty's lights allen
GT blazers on ice

[TastyBurrito]

Hello

Wow! That’s gonna be a fun Christmas complete