0 Members and 1 Guest are viewing this topic.
Reposting this here for reference CUCKTARD’S ALL-INCLUSIVE INSTRUCTIONS FOR FRONTSIDE AND BACKSIDE SLAPPIES Take photos now, or copy-paste somewhere on your phone for reference when your at your preferred slutty and slick curb. 1- HANG YOUR FEET OFF. You are going to turn hard and help those wheels up onto the curb, so if you are going backside, hang your toes off more than usual. If your going frontside, hang your heels off. Also, for beginners, have your front foot over the front bolts, right up against the curve of the nose. The back foot is on wherever, but maybe not on the end of the tail. You’re not going to lift the nose. 2- GO STRAIGHT AT THE CURB (or almost straight)This is just for the beginners. After you get the hang of it and your confidence increases, you can go at a lower angle. But going head-on into the curb will help you get onto it, so have your bodily mass heading into it. 3- CARVE About a meter/yard before you hit, carve hard into the direction you wanna get on. Your board should be between 70-45 degrees to the curb at time of impact. Your body weight should be well inside the turn, and you should be cranking down hard on those toes or heels. 3- DON’T SLAM THE BOARDThis is the most important point. And one that people make the most mistakes with. Slappies are actually kinda delicate, and a pretty smooth feeling trick once you understand this point. As your front wheels hit the curb, you have to lighten your front foot, like when you nollie bump a crack in the pavement. You let the board bump up onto the curb, and then do the same with your back foot, as you push it into place. It’s a very quick and subtle unweighting of front foot-back foot. You never straight-leg slam the board into the curb. ****if you don’t twist enough into the turn, your back wheels won’t bump up. You have to twist your body so that your shoulders and hips are in line with the curb. This is usually easier frontside (probably because fs grinds on as a mini are like this, but with bs you can stay open to the coping). On a slappy, you gotta fully turn your whole body so that the back wheel gets on****4- GET IN THE BACKSEATWith your front foot so far forward, you may find yourself weighting the front truck so much that it catches on the grind. As you get that back truck on, scoot the whole board forward underneath you, get your weight back of center, and grind5-ENJOY THE RIDE, DISMOUNT IN YOUR PREFERRED STYLE, AND UTTER “PRAISE BE TO LUCERO”
Anyone have any specific pointers for slappy feebles on parking blocks (backside)? I can do other slappies and these look so simple and effortless compared to even slappy 5050s but I can’t wrap my head around where to begin with them. Obviously the front truck is being placed over the block as you get to it but are you putting pressure on your front foot at that point to assist the back truck in popping up to lock into the feeble? It also seems like you need to be moving at a decent speed to make these work.
Quote from: big_kev_215 on May 15, 2022, 11:41:38 AMExpand QuoteAnyone have any specific pointers for slappy feebles on parking blocks (backside)? I can do other slappies and these look so simple and effortless compared to even slappy 5050s but I can’t wrap my head around where to begin with them. Obviously the front truck is being placed over the block as you get to it but are you putting pressure on your front foot at that point to assist the back truck in popping up to lock into the feeble? It also seems like you need to be moving at a decent speed to make these work. [close]You definitely need some speed but don't need to be flying. Biggest two points: lean on your back foot, and center your weight and balance on that back foot because it's doing all thee work. The front foot's job is just to stop the board from rotating further frontside.
Anyone have any specific pointers for slappy feebles on parking blocks (backside)? I can do other slappies and these look so simple and effortless compared to even slappy 5050s but I can’t wrap my head around where to begin with them. Obviously the front truck is being placed over the block as you get to it but are you putting pressure on your front foot at that point to assist the back truck in popping up to lock into the feeble? It also seems like you need to be moving at a decent speed to make these work. [close]
Quote from: Dr Steve Brule on May 15, 2022, 01:00:21 PMExpand QuoteQuote from: big_kev_215 on May 15, 2022, 11:41:38 AMExpand QuoteAnyone have any specific pointers for slappy feebles on parking blocks (backside)? I can do other slappies and these look so simple and effortless compared to even slappy 5050s but I can’t wrap my head around where to begin with them. Obviously the front truck is being placed over the block as you get to it but are you putting pressure on your front foot at that point to assist the back truck in popping up to lock into the feeble? It also seems like you need to be moving at a decent speed to make these work. [close]You definitely need some speed but don't need to be flying. Biggest two points: lean on your back foot, and center your weight and balance on that back foot because it's doing all thee work. The front foot's job is just to stop the board from rotating further frontside.[close]Word thanks. Too many hunks out there doing slappy feebles Dr.
Quote from: big_kev_215 on May 15, 2022, 11:41:38 AMExpand QuoteAnyone have any specific pointers for slappy feebles on parking blocks (backside)? I can do other slappies and these look so simple and effortless compared to even slappy 5050s but I can’t wrap my head around where to begin with them. Obviously the front truck is being placed over the block as you get to it but are you putting pressure on your front foot at that point to assist the back truck in popping up to lock into the feeble? It also seems like you need to be moving at a decent speed to make these work. [close]You definitely need some speed but don't need to be flying. Biggest two points: lean on your back foot, and center your weight and balance on that back foot because it's doing all thee work. The front foot's job is just to stop the board from rotating further frontside.[close]
Quote from: biaherl on March 30, 2022, 12:48:52 PMExpand QuoteI would first learn how to do slappies then figure out what I needed to do them betterYou can do slappies on any setup[close]This. Oh, slappies are high impact btw. You’ll find this out once you slam on a few.
I would first learn how to do slappies then figure out what I needed to do them betterYou can do slappies on any setup[close]
Quote from: Plan9Customs on March 30, 2022, 05:42:33 PMExpand QuoteQuote from: biaherl on March 30, 2022, 12:48:52 PMExpand QuoteI would first learn how to do slappies then figure out what I needed to do them betterYou can do slappies on any setup[close]This. Oh, slappies are high impact btw. You’ll find this out once you slam on a few.[close]AMEN. You will get pitched when things don’t go right.
Quote from: biaherl on March 30, 2022, 12:48:52 PMExpand QuoteI would first learn how to do slappies then figure out what I needed to do them betterYou can do slappies on any setup[close]This. Oh, slappies are high impact btw. You’ll find this out once you slam on a few.[close]
Are slappies on really tall, completely vertical curbs the same as any other slappy? Or is there some slight lifting of the front truck involved? I don't get how you can straight smash into those and get up on the curb.
Ched on nach is mand