Wheels Thread

[Gray Imp Sausage Metal]

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[DERBY]

Maybe dumb question incoming.. what are people using bigger 56mm+ wheels in the classic shape for?

They seem really popular on here but I can't figure it out. Bigger wheels are generally for transition and the classic shape is for street/tech. Is it a best of both worlds thing?

I'm on big boards again and the thought of shaving some weight off with slimer wheels is tempting but learning to ride transition on them feels like it could be slippery

slimmer wheels would defs be slippery.

my previous set was the 60mm classic shape and i loved em. i found them to be pretty good on street. it’s gotten slippery on transition tho (indoor wooden).

if you want the best of both worlds you’d might wanna try out the radial shape

[rocklobster]

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[FuzzGNU]

Alright guys, I've got some wheel reviews followed up by some questions...

-----

The past several years I've ridden...

Bones STF 103a 55mm - V4 Wide - 17mm riding patch
Bones STF 103a 56mm - V6 Widecut - 20.5mm riding patch

These things are great as long as you're skating smoother surfaces.

+ Very fast.
+ SO fun! Amazing for powerslides/reverts. Very slick and slidey. Mostly only slide when you want them to.
+ Very responsive, and I can feel the board and what I'm riding on very easily.
+/- Slippery on ramps, but in a predictable way. You can pretty much always count on them to slide, for better or for worse. Fun for cess slides and reverts, but could cause some troubles for when you are relying on traction.
- Too hard to tackle pebbles/debris (despite large size). Often found myself eating shit on pebbles I felt I should be able to ride over.
- Too hard to ride on crusty streets. My feet would be numb/tingling from vibrations after I road down certain streets. Rougher surfaces really effect your speed.
- Can slide out on you skating certain surfaces.

Overall, by far my favorite wheels I've ever had when it comes to smooth/clean streets and spots.

9/10. Amazing wheels, but they are awful in the wrong circumstances.

-----

Then to help out a local skateshop I settled for trying...

OJ Elite 101a 54mm - Mini Combo - 20mm riding patch

+ About 80% as slick as my Bones wheels, great for powerslides/reverts. No problems here.
+ What they maybe lacked in slickness they made up for in a slightly smoother ride. I could still powerslide around, but it felt like a bit better for cruising streets. Still a hard wheel though.
+ Still had solid responsiveness and feel.
+ No noticeable difference in speed from my Bones wheels
+/- Felt less "plasticky" than Bones wheels. Again, less slidey.
- It felt slightly less predictable on park surfaces. Sometimes would stick instead of slide. Not a huge deal though.
- I had SOME flatspots. Again, I really like powerslides.
- Maybe wore down faster than Bones wheels?

Surprisingly, I really liked these wheels a lot too. A bit more versatile than those Bones wheels, not as extreme. Not quite as "fun" and slidey, but I never had any trouble sliding when I wanted to. Maybe flatspot and wear down a bit more.

8/10. A little bit more of an all-around wheel. I really enjoyed these. Definitely worth grabbing if they're on sale!

-----

After all the hype I had heard about F4 Conical Fulls, I decided to give them a try. I went in essentially wanting to use them as semi-cruiser wheels. So I decided to try the new 97d...

Spitfire F4 97d 54mm - Conical Full - 22mm riding patch

Well. I got what I asked for, I guess. By chance, after getting them I moved to a place with CRUSTY streets everywhere so they really came in handy. These things have done a good job riding some streets that my Bones wheels would never be able to handle.

+ Can handle the crustiest streets of any wheels I've ever had. There are still limits to what it can handle, but I'm riding on streets where other wheels would struggle and vibrate. It really is a luxury to not have to think about that stuff quite as much.
+ I will often ride over pebbles that I am surprised I can ride over. Its a really a confident ride on these things.
+/- At 97d they almost feel a bit like cruiser wheels. A bit too soft and rubbery to really "feel" what you're skating. However, I haven't found it gets in the way of most tricks, just a bit of a muted feel things. They still pop just fine, no worries here.
+/- They really stick on ramps consistently and keep you from sliding. Probably a plus for most people, but I'm so used to riding Bones still.
- Surprisingly slow. This was a noticeable shock to me. On smooth streets that I used to rip down, I had to push harder to get up to my normal speed. Definitely a lower top speed/acceleration.
- Really hard to powerslide, especially at low speeds. Powerslides don't slide as far as Bones, they grind you to a halt really fast and sometimes kick me off a bit when I'm not ready for it.

8/10. They have come in SO clutch on crusty streets, they are like a hybrid between a cruiser wheel and a trick wheel. But I'm left really missing that easy powerslide/revert I had with the harder Bones and OJ wheels. They are a workhorse wheel that serves their purpose and lets you skate things you wouldn't normally be able to. You can skate confidently not worrying about sliding out (exceptions of ice and slick blacktop). However, the wheel feels less "fun" when I'm skating normal terrain, because I miss sliding around so easily at any speed.

-----

My question is... Where do I go from here? I'm considering...

Bones STF 99a "Easy Streets" V6 Widecut - It would give me the Bones shape/feel I've always liked, but not as overly hard or niche. I've heard they still have that "plasticky" slide the harder Bones have.

Spitfire F4 101d Conical Full - I've heard in general Spitfire just feel a bit softer and don't slide as much compared to Bones... Would a 101d be a nice compromise, or would it have the same "overly hard" problems as Bones 103a but with less slide?

Spitfire F4 99d (Different Shape) - I'm thinking 99a Conical Fulls MIGHT give me similar problems as my 97d, but if I went F4 99a with a thinner shape maybe that would allow them to slide how I like them to, while giving me a softer riding surface for rougher streets.

What do you guys think are the main issues I'm having with my 97d Spitfires are in terms of slidability? Do you think its the F4 being stickier than STF, the slightly wider shape, or the 97d softness?

I would really value some input from someone who has skated some F4 97d. Thanks!

[goodatmeth]

Contrary to popular belief, thinner wheels slide worse.
So you'd probably be very happy with conical full 99a.
stf 99a are great too, a bit less slippery than 99a f4 in my experience

[manysnakes]

We need a Jan Heine for the science of powerslides.

[Texas_Tone]

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

3rd the loopholes/NFG camp, best wheels out

[Ok]

We need a Jan Heine for the science of powerslides.

Great reference.
I have considered his explanations of ‘planing’ when I’m thinking about why I prefer a good, somewhat flexy, ps stix deck.

[manysnakes]

Expand Quote

We need a Jan Heine for the science of powerslides.

[close]

Great reference.
I have considered his explanations of ‘planing’ when I’m thinking about why I prefer a good, somewhat flexy, ps stix deck.

I had the same thoughts a few days ago reading that thread.

[beandemon]

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

[intendedreceivers]

Bunch of wheel notes…

I also love my 97A Spitfire classics, but I can’t even get them to slide well on smooth ground. I feel like even the NFG 95A formula slides better.

I really like the STF 99A formula, for what it’s worth. I have several sets of the V5 shape (similar to a conical, maybe a little slimmer), and I think it would be a good middle ground; signature Bones feel and still pretty hard.

The 101A Spitfires are exclusively smooth ground wheels for me, like how the SPFs are for you, but the 99A are pretty versatile, so that’d be my second recommendation.

[intendedreceivers]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

Mine are the same way. Some are perfect, some are bubbly, but they’re great wheels despite the lack of aesthetics and polish.

Where did you find 52mm squares? I thought they only did the teardrop shape that small…

[rocklobster]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

https://www.nfgmfg.com/designs

Teardrops - 52 / 54
Square - 54
Vee - 54 / 56 / 58 / 60

[beandemon]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

[close]

https://www.nfgmfg.com/designs

Teardrops - 52 / 54
Square - 54
Vee - 54 / 56 / 58 / 60

You’re right! I think I was thrown by the 52D. And thanks for the reassurance on the cosmetic details.

[iw0]

i only have a set of the 95A squares vs reg formula, but i'm totally willing to shoot them over to you when they get to 52ish. probably not the same as an actual set made at 52 BUT i thought i'd throw it out there. also don't know how soon that will happen.

stealth edit: just motivated myself to skate more/harder 💪

[Frank and Fred]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

[close]

Mine are the same way. Some are perfect, some are bubbly, but they’re great wheels despite the lack of aesthetics and polish.

Where did you find 52mm squares? I thought they only did the teardrop shape that small…

I have some Loopholes, that I just set up. I haven't used them yet as there has been a deluge of rain since... However, they have been sitting on my rug and they appear to have absorbed dust and dirt off the rug. It's peculiar and not something I can just clean off. The specs are beyond the surface and in the actual wheel. The surface is still smooth. Anyway, I hope this will wear away with use and not impact performance.

[Schinken]

Alright guys, I've got some wheel reviews followed up by some questions...

-----

The past several years I've ridden...

Bones STF 103a 55mm - V4 Wide - 17mm riding patch
Bones STF 103a 56mm - V6 Widecut - 20.5mm riding patch

These things are great as long as you're skating smoother surfaces.

+ Very fast.
+ SO fun! Amazing for powerslides/reverts. Very slick and slidey. Mostly only slide when you want them to.
+ Very responsive, and I can feel the board and what I'm riding on very easily.
+/- Slippery on ramps, but in a predictable way. You can pretty much always count on them to slide, for better or for worse. Fun for cess slides and reverts, but could cause some troubles for when you are relying on traction.
- Too hard to tackle pebbles/debris (despite large size). Often found myself eating shit on pebbles I felt I should be able to ride over.
- Too hard to ride on crusty streets. My feet would be numb/tingling from vibrations after I road down certain streets. Rougher surfaces really effect your speed.
- Can slide out on you skating certain surfaces.

Overall, by far my favorite wheels I've ever had when it comes to smooth/clean streets and spots.

9/10. Amazing wheels, but they are awful in the wrong circumstances.

-----

Then to help out a local skateshop I settled for trying...

OJ Elite 101a 54mm - Mini Combo - 20mm riding patch

+ About 80% as slick as my Bones wheels, great for powerslides/reverts. No problems here.
+ What they maybe lacked in slickness they made up for in a slightly smoother ride. I could still powerslide around, but it felt like a bit better for cruising streets. Still a hard wheel though.
+ Still had solid responsiveness and feel.
+ No noticeable difference in speed from my Bones wheels
+/- Felt less "plasticky" than Bones wheels. Again, less slidey.
- It felt slightly less predictable on park surfaces. Sometimes would stick instead of slide. Not a huge deal though.
- I had SOME flatspots. Again, I really like powerslides.
- Maybe wore down faster than Bones wheels?

Surprisingly, I really liked these wheels a lot too. A bit more versatile than those Bones wheels, not as extreme. Not quite as "fun" and slidey, but I never had any trouble sliding when I wanted to. Maybe flatspot and wear down a bit more.

8/10. A little bit more of an all-around wheel. I really enjoyed these. Definitely worth grabbing if they're on sale!

-----

After all the hype I had heard about F4 Conical Fulls, I decided to give them a try. I went in essentially wanting to use them as semi-cruiser wheels. So I decided to try the new 97d...

Spitfire F4 97d 54mm - Conical Full - 22mm riding patch

Well. I got what I asked for, I guess. By chance, after getting them I moved to a place with CRUSTY streets everywhere so they really came in handy. These things have done a good job riding some streets that my Bones wheels would never be able to handle.

+ Can handle the crustiest streets of any wheels I've ever had. There are still limits to what it can handle, but I'm riding on streets where other wheels would struggle and vibrate. It really is a luxury to not have to think about that stuff quite as much.
+ I will often ride over pebbles that I am surprised I can ride over. Its a really a confident ride on these things.
+/- At 97d they almost feel a bit like cruiser wheels. A bit too soft and rubbery to really "feel" what you're skating. However, I haven't found it gets in the way of most tricks, just a bit of a muted feel things. They still pop just fine, no worries here.
+/- They really stick on ramps consistently and keep you from sliding. Probably a plus for most people, but I'm so used to riding Bones still.
- Surprisingly slow. This was a noticeable shock to me. On smooth streets that I used to rip down, I had to push harder to get up to my normal speed. Definitely a lower top speed/acceleration.
- Really hard to powerslide, especially at low speeds. Powerslides don't slide as far as Bones, they grind you to a halt really fast and sometimes kick me off a bit when I'm not ready for it.

8/10. They have come in SO clutch on crusty streets, they are like a hybrid between a cruiser wheel and a trick wheel. But I'm left really missing that easy powerslide/revert I had with the harder Bones and OJ wheels. They are a workhorse wheel that serves their purpose and lets you skate things you wouldn't normally be able to. You can skate confidently not worrying about sliding out (exceptions of ice and slick blacktop). However, the wheel feels less "fun" when I'm skating normal terrain, because I miss sliding around so easily at any speed.

-----

My question is... Where do I go from here? I'm considering...

Bones STF 99a "Easy Streets" V6 Widecut - It would give me the Bones shape/feel I've always liked, but not as overly hard or niche. I've heard they still have that "plasticky" slide the harder Bones have.

Spitfire F4 101d Conical Full - I've heard in general Spitfire just feel a bit softer and don't slide as much compared to Bones... Would a 101d be a nice compromise, or would it have the same "overly hard" problems as Bones 103a but with less slide?

Spitfire F4 99d (Different Shape) - I'm thinking 99a Conical Fulls MIGHT give me similar problems as my 97d, but if I went F4 99a with a thinner shape maybe that would allow them to slide how I like them to, while giving me a softer riding surface for rougher streets.

What do you guys think are the main issues I'm having with my 97d Spitfires are in terms of slidability? Do you think its the F4 being stickier than STF, the slightly wider shape, or the 97d softness?

I would really value some input from someone who has skated some F4 97d. Thanks!

I tried bones stf 99a, spitfire f4 99a radial full and Oj elite 99a.

Stf99a: overall good wheels, very slidey on asphalt. Feels like sliding on ice cubes. They feel like they would grip but once they break loose I tend to slip out. Didn't try them on metal ramps. Fast, no flatspots.

Spitfire 99a:compared to stf99a grip to slip is more predictable. Good slide, fast, no flatspots. Wider contact patch helps a lot on rough streets.  Slippery on metal ramps.

Oj elite 99a: Fast and forgiving. They feel good on almost every surface I've tried. More grip and predictable slide.
I could imagine cruising on them.
I've got tiny flatspots but they ride out pretty quick. Less durable than stf/spitfire.

For me it's Oj elite 99a > spitfire f4 99a > stf 99a.

[manysnakes]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

This was the issue with all of their initials wheels NFG made for Road Crew, which ended up being their only order with them and causing some hullabaloo. AFAIK those wheels are fine but I totally understand why someone who spent $40 on some premium skateboard wheels would be put off by that sort of thing.

[braksabbath]

I don't mind the air bubbles on my set of NFG Vee's but I ordered a set of the factory seconds... 

[manysnakes]

Re: 97a Spitfires - I’m a bit advocate for these wheels and I think they work great if you are primarily skating crusty asphalt parking lots and busted streets somewhere near to or north of the 45th parallel. They are slower and they do not slide as well as other wheels, and in a skatepark or on smooth cement, they often lack the satisfying bark you get from sliding. The primary advantage they offer is that you are significantly less fatigued skating for hours on the shitty ground.

So if this is a concern for you, as it is me, get these wheels. Otherwise, 99a-101a will do you well.

[Ok]

Re: 97a Spitfires - I’m a bit advocate for these wheels and I think they work great if you are primarily skating crusty asphalt parking lots and busted streets somewhere near to or north of the 45th parallel. They are slower and they do not slide as well as other wheels, and in a skatepark or on smooth cement, they often lack the satisfying bark you get from sliding. The primary advantage they offer is that you are significantly less fatigued skating for hours on the shitty ground.

So if this is a concern for you, as it is me, get these wheels. Otherwise, 99a-101a will do you well.

Do you prefer a certain shape?
See I believe we have similar locations

[dr.prestige]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

They should skate identically to wheels without bubbles. I like to put the bubble side facing away from the truck, I like to think that the bubbles help me grip the curb better on slappies.

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Every time I think of migrating to another brand from F4 it’s like I cant quit an addiction. I mostly skate smooth ground but not parks. Is there any reason to fuck with Dialtone or Loophole? Their shapes seem reasonably close to Spit but I like the smaller brand vibe and their teams.

[close]

loopholes now! Quality is up there with F4. Never had dial tones but I doubt the urethane is on par with the loops

[close]

I second the NFG / Loophole props, they are really forgiving for hardness rating above 103a. Really liking the Square shape, just wish they did those in 52mm instead of 54mm and up.

[close]

3rd the loopholes/NFG camp, best wheels out

[close]

Man, I’ve been on the fence about speaking up, but I’m not super impressed with the finish on my NFG 95a 56mm V’s. There’s several small bubbles and there appears to be some bubbles just under the skin. I’ve contacted nfg about it and they assured me it’s cosmetic and said to try them first. And there’s the rub- I’m on the north coast and have skated 3x this year, all inside. I don’t fancy trying to wear the skin off new wheels at the indoor park, either. There should be some dry pavement this month, and I’m very ready to give these wheels a try.

@rocklobster - the “Square” shape comes in 52 and 54; the “Vee”, which is really square, comes in 54 and up.

[close]

Mine are the same way. Some are perfect, some are bubbly, but they’re great wheels despite the lack of aesthetics and polish.

Where did you find 52mm squares? I thought they only did the teardrop shape that small…

[close]

I have some Loopholes, that I just set up. I haven't used them yet as there has been a deluge of rain since... However, they have been sitting on my rug and they appear to have absorbed dust and dirt off the rug. It's peculiar and not something I can just clean off. The specs are beyond the surface and in the actual wheel. The surface is still smooth. Anyway, I hope this will wear away with use and not impact performance.

This sort of thing is normal. It'll wear off with some skating. Same sort of thing as your wheels turning black after skating asphalt or turning red after slappying some red curbs. I think it's because urethane is porous, so little bits of whatever you're skating collect in the wheel's microscopic pores. That's just a guess, though.

[manysnakes]

Expand Quote

Re: 97a Spitfires - I’m a bit advocate for these wheels and I think they work great if you are primarily skating crusty asphalt parking lots and busted streets somewhere near to or north of the 45th parallel. They are slower and they do not slide as well as other wheels, and in a skatepark or on smooth cement, they often lack the satisfying bark you get from sliding. The primary advantage they offer is that you are significantly less fatigued skating for hours on the shitty ground.

So if this is a concern for you, as it is me, get these wheels. Otherwise, 99a-101a will do you well.

[close]

Do you prefer a certain shape?
See I believe we have similar locations

I prefer the conical, but either shape is fine. I’m not very particular here.

[Ok]

Expand Quote

Expand Quote

Re: 97a Spitfires - I’m a bit advocate for these wheels and I think they work great if you are primarily skating crusty asphalt parking lots and busted streets somewhere near to or north of the 45th parallel. They are slower and they do not slide as well as other wheels, and in a skatepark or on smooth cement, they often lack the satisfying bark you get from sliding. The primary advantage they offer is that you are significantly less fatigued skating for hours on the shitty ground.

So if this is a concern for you, as it is me, get these wheels. Otherwise, 99a-101a will do you well.

[close]

Do you prefer a certain shape?
See I believe we have similar locations

[close]

I prefer the conical, but either shape is fine. I’m not very particular here.

Thanks!
I have 56 97a classics. Skate decent. At parks, sometimes they can feel slow. Which is fine, as I’m always about to die in a park anyways.

[Gray Imp Sausage Metal]

Re: air bubbles in NFG wheels; they are hand poured so you will get discrepancies. Reminds me of 80s/ 90s wheels so I’m down and know that it doesn’t affect performance anyway!

[LebowskisRug]

Bought the 54 Jamal Williams teardrop shape and calipered them at 53.4. My worn in 53 classics are at 53.1, so not really much different.

[Frank and Fred]

First session on some Loopholes today. 54mm Tear drop shape. Very impressive. For a hard wheel they felt really good and fast on crappy ground. Maybe a little faster than 54mm 99a F4 Classics. They definitely feel grippier than 99a F4s though, which might be good on hills and the type of skateboarding you see the likes of Chris Athans doing. I will have to take them to a skatepark next and also see how durable they are after a few sessions,  but zero signs of wear and tear after a few hours.

I'd put them in the same high end category as F4s and STF. Certainly not your run of the mill urethane. Recommended.

[rocklobster]

Still loving the NFG 54mm Square shape, my wheels were sliding out hard on lipslide exits and zero flatspots. Not the same story with the SML wheels I rode a few weeks back. And really fast for the rough park I frequent. NFG if you're listening please make the Square and Vee shape in 52mm!

[Gray Imp Sausage Metal]

First session on some Loopholes today. 54mm Tear drop shape. Very impressive. For a hard wheel they felt really good and fast on crappy ground. Maybe a little faster than 54mm 99a F4 Classics. They definitely feel grippier than 99a F4s though, which might be good on hills and the type of skateboarding you see the likes of Chris Athans doing. I will have to take them to a skatepark next and also see how durable they are after a few sessions,  but zero signs of wear and tear after a few hours.

I'd put them in the same high end category as F4s and STF. Certainly not your run of the mill urethane. Recommended.

once you warm them up and break them in a little, the slide will be very similar to F4 99s, perhaps even more controlled depending on the batch you got.
I’ve let multiple people ride my setup with 56 v-cuts on it and almost all of them will immediately convert to loopholes, but will then tell me their wheels are “broken” when they put a fresh set on their own board. Even my first few sessions on my teardrops had me doubting myself but once they break in it’s hard to ride anything else…

[LebowskisRug]

I had some 53 F4 classics I got from my neighbor in a trade a while back and I could never remember why I stopped using them. Turns out if I land remotely off kilter or primo the wheel will slip and cause the bearings to bind. No spacers and this didn’t happen in my 52 classics that are now sub 50. Is this a defect?