DLX Shapes

[Fredonskateboard]

I got my 2nd Real board last week. A R1 construction board.
Hard to say, but from my memory, the low pro II deck I had, felt like it had more pop. However, it also seemed to flex alot more, so I got alot of pressure cracks around the trucks. Is there any truth to this or?

[Italianshredder96]

I got an anti hero 8.25 cause I found a good deal in a skate shop in Rome...i must say the fullness is the same as my real full se 8.25 stacked on top are almost the same

Width: both 8.3175
Length: full se 31.75, normal 31.875
Wb: full se 14.25, normal 14.375

So far so good, I'm for sure gonna buy normal decks from dlx and not only fulls.

[roba]

8.375-8.5 x 32 with a 14.38 wheelbase
big blunt nose, smaller and a bit more pointy tail, mellow concave

[Dad you're embarrassing me]

I'm riding a Real Low Pro II it's a 8.43" I like the shape and concave, it has more concave than what I usually ride but it's good ... the only problem is a huge wheelbase it's a 14.75" and it's annoying I considered redrilling, but I'm too worried I'd ruin the deck.

I’m currently riding a Krooked 8.5 PP with a 14.75 WB, and I LOVE the longer WB, I can’t even handle a 14.5 any more, too short!

[Crow T. Robot]

Not sure if this has gotten any discussion, but is the Yinzer shape for Kanfoush a one time run, or will it be in future drops? Really want to try it out but might just hold onto the deck I've got as a wall board. I don't think I saw it in the most recent catalog.

Width: 8.55" / Length: 31.62" / Wheelbase: 14.12"

[LennyDLXSF]

Not sure if this has gotten any discussion, but is the Yinzer shape for Kanfoush a one time run, or will it be in future drops? Really want to try it out but might just hold onto the deck I've got as a wall board. I don't think I saw it in the most recent catalog.

Width: 8.55" / Length: 31.62" / Wheelbase: 14.12"

We are planning on keeping this shape around!

Hardgoods guys said it will come out every other drop or so.

Cheers!

[tzhangdox]

The 8.38 full shape with the 14.62 wheelbase and 32.43 length is quite nice. Any chance of it being a tiny bit shorter at maybe 32.35 or something and the wheelbase being shrunk to something between 14.5 and 14.62. That would be pretty ideal, also, low pros of every shape please.

[Brad Breath]

.07 of an inch?  We really are an odd bunch.

[tzhangdox]

I feel like a pussy just bringing it up, but it really is just enough to bother me the tiniest bit.

[BMCsteve]

I need to stop sleeping on the Ishod twin tail shapes.  Everytime that 8.5 comes out, it sells out of everywhere within a week or so

[Roisto]

I need to stop sleeping on the Ishod twin tail shapes.  Everytime that 8.5 comes out, it sells out of everywhere within a week or so

That needs to be in constant supply! I haven't seen the 8.38" or the 8.5" Ishod twil tail anywhere in Europe. Even the 8.3" is hard to come by. I've got one but it's just a tiny bit too small for me. Hoping to eventually be able to get the 8.5" some day!

[j....soy.....]

Been mentioned on here before but Krooked makes one too Worrest.....not my idea but antihero should do the gerwar one as well.....

[nosneb]

Gerwer pro model twin nose

[MOE SYZLAK]

Gerwer pro model twin nose

2 huge noses ?

[123ABC]

Expand Quote

Gerwer pro model twin nose

[close]

2 huge noses ?

Don’t worry about him. I’m picking up what you’re putting down!

[Numeral]

can you guys help me out?

what's the WB on the Krooked Krouded 2 8.5" deck? is it really 14"?

[ducky darnsworth]

i need a more steady supply of that classic eagle 9.0 x 33.25 15.2wb shape board, it keeps getting sold out online and thats the best size board i skated so far, only thing i would do different is up the length a bit to like 9.1 x 33.75-34" or something for the hell of it.

[Crow T. Robot]

Expand Quote

Not sure if this has gotten any discussion, but is the Yinzer shape for Kanfoush a one time run, or will it be in future drops? Really want to try it out but might just hold onto the deck I've got as a wall board. I don't think I saw it in the most recent catalog.

Width: 8.55" / Length: 31.62" / Wheelbase: 14.12"

[close]

We are planning on keeping this shape around!

Hardgoods guys said it will come out every other drop or so.

Cheers!

Thanks, glad to hear!

[Xen]

I need to stop sleeping on the Ishod twin tail shapes.  Everytime that 8.5 comes out, it sells out of everywhere within a week or so

I'm on my second 8.3 TT, really enjoy them.

[j....soy.....]

I liked mine a lot too....you kinda have two tails to wear through and it gets you over favouring one side...

[backinaction]

Expand Quote

I need to stop sleeping on the Ishod twin tail shapes.  Everytime that 8.5 comes out, it sells out of everywhere within a week or so

[close]

I'm on my second 8.3 TT, really enjoy them.

I too am on my 2nd.  First was a slick and I hope there is another slick available when my current one gives up the ghost.

[Xen]

Expand Quote

Expand Quote

I need to stop sleeping on the Ishod twin tail shapes.  Everytime that 8.5 comes out, it sells out of everywhere within a week or so

[close]

I'm on my second 8.3 TT, really enjoy them.

[close]

I too am on my 2nd.  First was a slick and I hope there is another slick available when my current one gives up the ghost.

I'd love to see a TT full series (just the 8.06/8.18/8.25s tho; I think any bigger wouldn't sell.

[Ok]

Expand Quote

Not sure if this has gotten any discussion, but is the Yinzer shape for Kanfoush a one time run, or will it be in future drops? Really want to try it out but might just hold onto the deck I've got as a wall board. I don't think I saw it in the most recent catalog.

Width: 8.55" / Length: 31.62" / Wheelbase: 14.12"

[close]

We are planning on keeping this shape around!

Hardgoods guys said it will come out every other drop or so.

Cheers!

Does this have a square, ish, tail? Can’t tell from the pics, can’t find it in person

[BoxStuffer]

Expand Quote

Expand Quote

Not sure if this has gotten any discussion, but is the Yinzer shape for Kanfoush a one time run, or will it be in future drops? Really want to try it out but might just hold onto the deck I've got as a wall board. I don't think I saw it in the most recent catalog.
Width: 8.55" / Length: 31.62" / Wheelbase: 14.12"

[close]

We are planning on keeping this shape around!

Hardgoods guys said it will come out every other drop or so.

Cheers!

[close]

Does this have a square, ish, tail? Can’t tell from the pics, can’t find it in person

Yes.  I would say slightly. 

[sharkin]

god damn that shape looks awesome

i get the whole 412 thing, but I need a 14.5 wb on that please

[Vintagebody]

Oh is the TT tails not very full?
I'm skating a full se atm, and I really enjoy the wider, more squared tail.

[Xen]

Oh is the TT tails not very full?
I'm skating a full se atm, and I really enjoy the wider, more squared tail.

The 8.3 TT is 'full' by the standard real 8.3 but not a full full, if you know what I mean

I'm a fan of the real 8.25 full, it's damn near perfect.

[Vintagebody]

Expand Quote

Oh is the TT tails not very full?
I'm skating a full se atm, and I really enjoy the wider, more squared tail.

[close]

The 8.3 TT is 'full' by the standard real 8.3 but not a full full, if you know what I mean

I'm a fan of the real 8.25 full, it's damn near perfect.

Yerr, thats what I ride at the moment, and its awesome indeed

[Ok]

Expand Quote

Expand Quote

Expand Quote

Not sure if this has gotten any discussion, but is the Yinzer shape for Kanfoush a one time run, or will it be in future drops? Really want to try it out but might just hold onto the deck I've got as a wall board. I don't think I saw it in the most recent catalog.
Width: 8.55" / Length: 31.62" / Wheelbase: 14.12"

[close]

We are planning on keeping this shape around!

Hardgoods guys said it will come out every other drop or so.

Cheers!

[close]

Does this have a square, ish, tail? Can’t tell from the pics, can’t find it in person

[close]

Yes.  I would say slightly. 

Thanks for pics! I like more pointy than square (unfortunately not as fashionable). Interested in anyone’s experience with this board. May try the navy eagle instead

[MOE SYZLAK]

I tried searching a few pages back but didn’t find the answer I was looking for.
So sorry I’d abp
But is there a shape guide for the I-IV shapes?
Or is the Roman numeral rating the concave?