Author Topic: The HD 4:3 thread  (Read 69557 times)

0 Members and 1 Guest are viewing this topic.

Beltran

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 8
  • Rep: 2
Re: The HD 4:3 thread
« Reply #390 on: January 15, 2022, 02:57:40 AM »
www.youtube.com/watch?v=uSiHzaEfSmY

I filmed this with a GH5 and a Meike 6.5 for fisheye shots and Hvx200 for long lens shots.

Tom Penny is amazing.


fickdiepolizei666

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 217
  • Rep: -7
  • 1312
Re: The HD 4:3 thread
« Reply #391 on: January 15, 2022, 03:54:03 AM »
https://www.instagram.com/p/CYPQ3qglyPS/

i had this 58mm raynox lens laying around the house, so i ordered a step down and two spacer rings and put it on my hvx.
I'm not so hyped on the vig but other than that am surprised by the outcome

Thejumpoff

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 31
  • Rep: 4
Re: The HD 4:3 thread
« Reply #392 on: January 17, 2022, 07:37:36 AM »
www.youtube.com/watch?v=uSiHzaEfSmY

I filmed this with a GH5 and a Meike 6.5 for fisheye shots and Hvx200 for long lens shots.

Tom Penny is amazing.

Is this shot in anamorphic mode? Wondering how you got that amount of vig using the meike 6.5

Beltran

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 8
  • Rep: 2
Re: The HD 4:3 thread
« Reply #393 on: January 17, 2022, 07:48:04 AM »
Expand Quote
www.youtube.com/watch?v=uSiHzaEfSmY

I filmed this with a GH5 and a Meike 6.5 for fisheye shots and Hvx200 for long lens shots.

Tom Penny is amazing.
[close]

Is this shot in anamorphic mode? Wondering how you got that amount of vig using the meike 6.5

Yes, I film in Anamorphic so I can use the whole sensor and film in 4:3 mode. Then I have to crop it. I like vig so for me it works.

EdwardVsShark

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 15
  • Rep: 3
Re: The HD 4:3 thread
« Reply #394 on: January 23, 2022, 01:08:54 PM »
http://www.youtube.com/watch?v=1lPR-ep_ATM

GH5 4K/60p Anamorphic 4:3, Lecia 10-25mm and Rokinon 7.5mm Fisheye, RØDE VideoMicro
Uploaded to YouTube in ProRes HQ

Gino's Back 180 Nosegrind

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 254
  • Rep: 34
Re: The HD 4:3 thread
« Reply #395 on: January 23, 2022, 02:25:41 PM »
https://www.instagram.com/p/CZFrDhjJiN8/?utm_source=ig_web_copy_link

https://youtu.be/qqmE03TwQCU

Shot on HPX170 + Opteka 58mm fisheye with 1 spacer. Tried to make the vig VX1/MK1-esque

Shameless plug: https://www.ngtvskateco.com/

We're selling boards. Clutch wood, fat cool trendy FA shape!!

CHONGO

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 4123
  • Rep: 28
    • tumblr avatar image
Re: The HD 4:3 thread
« Reply #396 on: January 23, 2022, 03:11:31 PM »
https://www.instagram.com/p/CZFrDhjJiN8/?utm_source=ig_web_copy_link

https://youtu.be/qqmE03TwQCU

Shot on HPX170 + Opteka 58mm fisheye with 1 spacer. Tried to make the vig VX1/MK1-esque

Shameless plug: https://www.ngtvskateco.com/

We're selling boards. Clutch wood, fat cool trendy FA shape!!

Damn dude that set up looks solid! Wish I never got rid of my 58mm opteka now...

Beltran

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 8
  • Rep: 2
Re: The HD 4:3 thread
« Reply #397 on: January 23, 2022, 08:59:09 PM »
http://www.youtube.com/watch?v=1lPR-ep_ATM

GH5 4K/60p Anamorphic 4:3, Lecia 10-25mm and Rokinon 7.5mm Fisheye, RØDE VideoMicro
Uploaded to YouTube in ProRes HQ

Try to turn off the automatic gain control for the sound and lower the input gain. Skate sounds will feel much better.

spicearoni

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 11
  • Rep: 0
  • @nicfromkenora
Re: The HD 4:3 thread
« Reply #398 on: February 07, 2022, 06:23:24 AM »
Finished up my lil 4:3 HD/film project! Ended up picking up a vx1000 with a Sony mrc1 after getting pretty annoyed with setting up the GH5 every time. Went a little overboard with all the cameras, but it was a fun project to film/edit!
Time Well Spent - https://youtu.be/2bbChjfUw0U






A little promo for a video I'm making that's packed with different formats, but super laid back content. Park footage, street footage, lots of camping footage. Just anything I can film in 2020 and put together into a project..
Shot with a GH5/Canon XA35/Arriflex 16S, and a Canon 814 Super 8 cam. Such a blast messing with all these!


https://youtu.be/8awy_d4TI7E

bataaard

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 137
  • Rep: 40
Re: The HD 4:3 thread
« Reply #399 on: February 08, 2022, 05:43:32 AM »
Expand Quote
Expand Quote
i think this was brought up but can't quite find it,

what's the go to way to mount a mk1 and hmc150? step up/down rings? if yes what size?

thank you
[close]

The sk8 rat solution was to grind down a 72mm spacer to half length and jb weld to the bayo. I did mine a bit differently. I bought an 82-72 step down and jb welded the bayo inside of the step down ring. Cheers!
[close]

would this damage your mk1? as i still intend on setting it on the vx1 as well.

thank you

non destructive option:
https://sk8mmllc.myshopify.com/products/universal-mk1-fisheye-adapter

i didn't test it but it seems good

Jordan Wiens

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 915
  • Rep: 48
  • @wardenjeans
    • portfolio avatar image
Re: The HD 4:3 thread
« Reply #400 on: February 09, 2022, 08:18:07 AM »
Expand Quote
Expand Quote
Expand Quote
i think this was brought up but can't quite find it,

what's the go to way to mount a mk1 and hmc150? step up/down rings? if yes what size?

thank you
[close]

The sk8 rat solution was to grind down a 72mm spacer to half length and jb weld to the bayo. I did mine a bit differently. I bought an 82-72 step down and jb welded the bayo inside of the step down ring. Cheers!
[close]

would this damage your mk1? as i still intend on setting it on the vx1 as well.

thank you
[close]

non destructive option:
https://sk8mmllc.myshopify.com/products/universal-mk1-fisheye-adapter

i didn't test it but it seems good

neither did the creator either apparently. seems kinda sus. only render images and no test footage. especially when the distance from fisheye to camera is so specific for it to be able to focus on some cameras.
youtube.com/wardenjeans
twitch.tv/wardenjeans

doyle

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 924
  • Rep: 210
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #401 on: February 09, 2022, 09:06:47 AM »
Expand Quote
Expand Quote
Expand Quote
Expand Quote
i think this was brought up but can't quite find it,

what's the go to way to mount a mk1 and hmc150? step up/down rings? if yes what size?

thank you
[close]

The sk8 rat solution was to grind down a 72mm spacer to half length and jb weld to the bayo. I did mine a bit differently. I bought an 82-72 step down and jb welded the bayo inside of the step down ring. Cheers!
[close]

would this damage your mk1? as i still intend on setting it on the vx1 as well.

thank you
[close]

non destructive option:
https://sk8mmllc.myshopify.com/products/universal-mk1-fisheye-adapter

i didn't test it but it seems good
[close]

neither did the creator either apparently. seems kinda sus. only render images and no test footage. especially when the distance from fisheye to camera is so specific for it to be able to focus on some cameras.

Got an email on Monday saying mine has shipped, so hopefully we'll see how it really is soon!

Frontsidefisheyetofakie

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 1
  • Rep: 0
Re: The HD 4:3 thread / what you do with that GH4?
« Reply #402 on: February 12, 2022, 04:03:42 AM »
Just picked up a GH4, pretty much ready to go suck some souls. Curious what other filmers have set up for settings/recording formats/lens

My set up is

GH5 small rig cage and rhode shot gun mic
GH4 - rokinon 7.5mm fish/meike 3.5mm fish
Picture settings CINELIKE V
4k 30fps anamorphic 4:3

What yall got set up?

Thejumpoff

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 31
  • Rep: 4
Re: The HD 4:3 thread
« Reply #403 on: February 20, 2022, 04:14:49 PM »
Thanks for the replies @bataaard @suckmadeck @Jordan Wiens

Expand Quote
So I'd say step down to 26mm if that's even possible? If it isn't I'd say the lower the number the better
[close]

Couldn't find any decent looking fish smaller than 37, so definitely gonna grab the Opteka 37mm. just unsure of how many spacers it'll take. I'll be experimenting and will report back.

**experimenting later, cause the TM-700 just showed up with a bunch of scratches on the lens -_- buying stuff online is such a pain in the ass lmao

I bought essentially the same setup. An hs-700 and an opteka 37mm. Also have a Sony ms907. Everything for under 350 and it looks great in my opinion. I have the fisheye with no spacers just the 46-37 step down ring and putting into a 4:3 time line gives it perfect vig with no extra cropping. Still waiting for snow to melt to get some test footage.

dipped

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 47
  • Rep: 0
Re: The HD 4:3 thread
« Reply #404 on: February 22, 2022, 01:36:51 AM »
I‘m curious as to how you mounted the ms907 to the camera, would like to know as i‘m also thinking about getting it for my ax700.

Thejumpoff

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 31
  • Rep: 4
Re: The HD 4:3 thread
« Reply #405 on: February 22, 2022, 06:27:33 AM »
I‘m curious as to how you mounted the ms907 to the camera, would like to know as i‘m also thinking about getting it for my ax700.

I used a mic stand mount that I cut down and taped to handle made out of two Camera L brackets and then secured it with just a piece of electrical tape. The cord is very long and not interchangeable so I wound it up and taped it to the handle. It’s not the best but it works fine.




doyle

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 924
  • Rep: 210
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: The HD 4:3 thread
« Reply #406 on: February 22, 2022, 05:13:42 PM »
Universal MK1 adapter came in, here's a little comparison:



Here are some screenshots if you want a closer look:
(if you right click -> copy image address -> paste into browser and remove the "l" before the .png at the end of the URL you can see the full HD res)


VX1000 MK1


XA11 MK1 (fully zoomed out, cropped to 4:3)


XA11 MK1 (fully zoomed out, cropped to 4:3, scaled up to 115%)


XA11 MK1 (zoomed in-camera, cropped to 4:3)


GH5 Canon 8-15mm (anamorphic mode, fully zoomed out, scaled down to ~53%)

Definitely not ideal testing conditions, but when I've got some time I'll do a proper skating one - first impressions are pretty good!
« Last Edit: February 22, 2022, 05:20:36 PM by doyle »

CossRooper

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1596
  • Rep: 139
  • What are you up to, drawing leafs?
    • timecube avatar image
Re: The HD 4:3 thread
« Reply #407 on: February 22, 2022, 06:02:54 PM »
Expand Quote
Thanks for the replies @bataaard @suckmadeck @Jordan Wiens

Expand Quote
So I'd say step down to 26mm if that's even possible? If it isn't I'd say the lower the number the better
[close]

Couldn't find any decent looking fish smaller than 37, so definitely gonna grab the Opteka 37mm. just unsure of how many spacers it'll take. I'll be experimenting and will report back.

**experimenting later, cause the TM-700 just showed up with a bunch of scratches on the lens -_- buying stuff online is such a pain in the ass lmao
[close]

I bought essentially the same setup. An hs-700 and an opteka 37mm. Also have a Sony ms907. Everything for under 350 and it looks great in my opinion. I have the fisheye with no spacers just the 46-37 step down ring and putting into a 4:3 time line gives it perfect vig with no extra cropping. Still waiting for snow to melt to get some test footage.


Looks so sick! I need to experiment more because my vig is pretty soft on the edges; yours looks very crisp. Maybe I can ditch one of the spacers.

I like the handle rig too; i had to get creative.

and yeah, anyone looking at these older gen Panasonic cameras: You're gonna need an external mic. Onboard is actual trash.

I'll post some pics of my handle and vig when I'm back at my PC!

Thejumpoff

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 31
  • Rep: 4
Re: The HD 4:3 thread
« Reply #408 on: February 22, 2022, 06:17:01 PM »
Expand Quote
Expand Quote
Thanks for the replies @bataaard @suckmadeck @Jordan Wiens

Expand Quote
So I'd say step down to 26mm if that's even possible? If it isn't I'd say the lower the number the better
[close]

Couldn't find any decent looking fish smaller than 37, so definitely gonna grab the Opteka 37mm. just unsure of how many spacers it'll take. I'll be experimenting and will report back.

**experimenting later, cause the TM-700 just showed up with a bunch of scratches on the lens -_- buying stuff online is such a pain in the ass lmao
[close]

I bought essentially the same setup. An hs-700 and an opteka 37mm. Also have a Sony ms907. Everything for under 350 and it looks great in my opinion. I have the fisheye with no spacers just the 46-37 step down ring and putting into a 4:3 time line gives it perfect vig with no extra cropping. Still waiting for snow to melt to get some test footage.
[close]

Looks so sick! I need to experiment more because my vig is pretty soft on the edges; yours looks very crisp. Maybe I can ditch one of the spacers.

I like the handle rig too; i had to get creative.

and yeah, anyone looking at these older gen Panasonic cameras: You're gonna need an external mic. Onboard is actual trash.

I'll post some pics of my handle and vig when I'm back at my PC!

Yea try it with just the 46-37 step down and no spacers. I noticed using any spacers made the vig a lot less sharp

Thejumpoff

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 31
  • Rep: 4
Re: The HD 4:3 thread
« Reply #409 on: February 23, 2022, 06:25:02 AM »
Saw this example of using the new mk1 adapter on an ax700.

https://www.instagram.com/p/CZ-heH9vF1x/?utm_medium=copy_link

CossRooper

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1596
  • Rep: 139
  • What are you up to, drawing leafs?
    • timecube avatar image
Re: The HD 4:3 thread
« Reply #410 on: March 02, 2022, 07:13:13 PM »
HDC-TM700 w/ Opteka 37mm cropped to 4:3

https://www.youtube.com/watch?v=VOok5PGHDSg

https://imgur.com/lHGY2Vx

https://imgur.com/5aPBedz

Expand Quote
[close]
Yea try it with just the 46-37 step down and no spacers. I noticed using any spacers made the vig a lot less sharp

Thanks for this!! Just the step down was the move.

This was even slightly out of focus and it's already way better

https://imgur.com/F1T82ZU
« Last Edit: March 02, 2022, 07:20:50 PM by CossRooper »

bataaard

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 137
  • Rep: 40
Re: The HD 4:3 thread
« Reply #411 on: March 04, 2022, 07:12:31 AM »
Saw this example of using the new mk1 adapter on an ax700.

https://www.instagram.com/p/CZ-heH9vF1x/?utm_medium=copy_link

I tested it yesterday, it's really good, feels sturdy aswell.

edssexTOY

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 191
  • Rep: 21
Re: The HD 4:3 thread
« Reply #412 on: March 23, 2022, 09:33:51 PM »
New Ryan Lay part's 4:3 HD looks great. Anyone know Eric Danescu's setup?

https://www.youtube.com/watch?v=TAevxfkO9cM


"The next time I see those fucking French dudes Vivien is dead!"

undergroundvisions

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 1
  • Rep: 0
Re: The HD 4:3 thread
« Reply #413 on: March 24, 2022, 04:56:46 AM »
Sony AX100/ modded Nikon FC-E9:

https://youtu.be/VXSkGtjv7t4

I modded this more securely than the original JB welded spacer method. After cutting the tube off, I filed the back of the housing down to the inner lock-ring threads, then screwed a male to male coupling ring to those threads from the outside, then stepped that up to 62mm. Came out way better than I expected.

Edit: No idea why it isn't letting me post the photo, but here's the link:
https://imgur.com/a/IGcMNIr
« Last Edit: March 24, 2022, 05:55:53 PM by undergroundvisions »

absolutebastard

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 2
  • Rep: 1
  • @absolutebastard
Re: The HD 4:3 thread
« Reply #414 on: March 25, 2022, 02:14:32 AM »
Hi guys, love all the experimentation going on in this group! Just wanted to share a film I've been shooting for the past year with the Canon XF200 and screw mount MK1.

https://www.youtube.com/watch?v=bC8QkxfySqE

mostlyslappies

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 19
  • Rep: 1
  • Filmer
    • IG avatar image
Re: The HD 4:3 thread
« Reply #415 on: March 25, 2022, 09:11:02 AM »
Hi guys, love all the experimentation going on in this group! Just wanted to share a film I've been shooting for the past year with the Canon XF200 and screw mount MK1.

Very sick vid, and that footage looks incredible.

Jordan Wiens

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 915
  • Rep: 48
  • @wardenjeans
    • portfolio avatar image
Re: The HD 4:3 thread
« Reply #416 on: March 25, 2022, 10:00:18 AM »
Hi guys, love all the experimentation going on in this group! Just wanted to share a film I've been shooting for the past year with the Canon XF200 and screw mount MK1.

https://www.youtube.com/watch?v=bC8QkxfySqE
looked so good! if it wasnt for the audio i wouldve mistook it for upscaled vx footage. i have one of the rare screw mk1's too. eventually want to pick up the xf400/405 if i find one at a good price.
youtube.com/wardenjeans
twitch.tv/wardenjeans

CossRooper

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1596
  • Rep: 139
  • What are you up to, drawing leafs?
    • timecube avatar image
Re: The HD 4:3 thread
« Reply #417 on: April 07, 2022, 05:55:25 PM »
Hi guys, love all the experimentation going on in this group! Just wanted to share a film I've been shooting for the past year with the Canon XF200 and screw mount MK1.

https://www.youtube.com/watch?v=bC8QkxfySqE

wow. insanely great clip/crazy skating (+the leon track!!!) and stoked you posted it up in here.

P2PIMP

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 12
  • Rep: 2
Re: The HD 4:3 thread
« Reply #418 on: April 08, 2022, 09:19:19 PM »
lurked this thread for a few months while figuring out the best option to make my set up work for 4:3. i filmed this edit for three weeks while testing out the meike 3.5mm on a panasonic af-100. the intro was filmed with trv-900 and the HD long lens is a hvx-200.

https://www.youtube.com/watch?v=mc66Ln2e1sk&feature=emb_title

dakotalofton

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 34
  • Rep: -21
  • Nothing I say you will like
    • YOUTUBE avatar image
Re: The HD 4:3 thread
« Reply #419 on: April 11, 2022, 09:42:48 AM »
https://www.youtube.com/watch?v=1yz4GhrqbEQ

Not the best skating but this was shot on a HPX170 mounted with a 58mm Fisheye with a x2 72mm spacer and a 72mm-58mm Step down ring. With a 3840 x 2880 Resolution in FCPX some clips were shot on a 5d mark ii just cropped in post with no vig on Fish clips

P.S Editing is not my strong point and i dont think im good at it  ;D
Quote
****IF YOU DON'T FUCK WITH BRONZE56K YOU WHACK AS FUCK****