Big Boards 9"+( I wanna hear big boys talk about their big boards)

[Yesterdays-pop]

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

https://imgur.com/gallery/DsDPEfV

Sickest thread!!
Fuck yeah both those graphics are good. What bushings you got in those indys?

[Freger]

Expand Quote

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

https://imgur.com/gallery/DsDPEfV

[close]

Sickest thread!!
Fuck yeah both those graphics are good. What bushings you got in those indys?

Just stock bushings. I have a guilty pleasure for stock indy bushings

[jay_nev]

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

who makes those decks?

[munchbox]

Expand Quote

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

[close]

who makes those decks?

not sure about the right, but the left is a polar p8

[Freger]

Expand Quote

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

[close]

who makes those decks?

From a brand I never heard of before called coda. I think they are pressed by Chapman but not sure.

[jay_nev]

Expand Quote

Expand Quote

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

[close]

who makes those decks?

[close]

From a brand I never heard of before called coda. I think they are pressed by Chapman but not sure.

Nice they make some cool stuff out of Brooklyn
https://www.codaskateboards.com/shop

this rules

[radcunt]

Set this board up today and gave it a quick roll.  Feels amazing.  I put these trucks straight on from my old board which were silent, then on this one they were squeaky as hell.  Board feels higher too.  Weird. 

[jay_nev]

Set this board up today and gave it a quick roll.  Feels amazing.  I put these trucks straight on from my old board which were silent, then on this one they were squeaky as hell.  Board feels higher too.  Weird. 

looks really good nice grip job. That’s a 32” x 14.38” wb? What’s the rear taper to?

[munchbox]

anyone try the theories special delivery shape? hows the small ass nose?

[jay_nev]

anyone try the theories special delivery shape? hows the small ass nose?

someone posted the Newman one in the set up thread maybe back in the fall.
Special Delivery:
9.0" x 31.25"
WB: 14.25"

I kinda wanna try the polar 1991 shape after this dane1 but got some time to wait ‍♂️
9.25 x 32.125”
WB: 14.5”

[radcunt]

Expand Quote

Set this board up today and gave it a quick roll.  Feels amazing.  I put these trucks straight on from my old board which were silent, then on this one they were squeaky as hell.  Board feels higher too.  Weird. 

[close]

looks really good nice grip job. That’s a 32” x 14.38” wb? What’s the rear taper to?

Dimensions are;
LENGTH: 32.0in
WIDTH: 9.25in
WHEELBASE: 14.38in
NOSE: 7.125in
TAIL: 6.875in
And the tail tapers to about 8.5

Had to split the grip to make the width

[Yesterdays-pop]

Expand Quote

Expand Quote

Expand Quote

Got a new board today! It's about 9.0 in the front and 8.5 in the back with a 14.5 in wheelbase. Not quite ready to set it up but I'm stoked on the graphic.

[close]

who makes those decks?

[close]

From a brand I never heard of before called coda. I think they are pressed by Chapman but not sure.

[close]

Nice they make some cool stuff out of Brooklyn
https://www.codaskateboards.com/shop

this rules

I’ve had a couple 8.75” Coda decks and they have been some of my favorites. Too small for the big boy thread.

[satan]

Stumbled across this and thought you guys might be stroked on Julian's first board
10.25" x 32.26"
14" or 14.5" wb
Modern measurements would be 7.125" tail, 6.375" or 5.875" nose
Had rocker concave

[chris.]

Baker 9.1x31.8 (if I remember correctly)
Venture 5.8 (stock w/ bones top washer)
F4 101 56mm classics

I picked this up last spring and had it set up with some Ace 55s and the same F4s. It was quickly relegated to strictly cruiser status, OJ Super Juice and all, I couldn’t pop the thing for shit. Shuffled some gear around (55s back onto my regular 8.5” set up) and threw these Ventures on if for no other reason than both deck and trucks were just laying around at that point. Long story short, I can finally skate this thing the way I originally intended. Neighborhood cruising, ollieing manholes, blasting out of curb cuts and the like. They just repaved most of my neighborhood so the streets are super smooth and the F4 101s are perfect. Probably not worth it to buy Ventures in the appropriate size, I’ll just keep these 5.8s on here a while until I want to use them again elsewhere.

[rupertspupkin]

Slept on Dane's shape for what feels like years. Finally gave it a shot and I am now filled with undying regret.

[jakeumms]

Stumbled across this and thought you guys might be stroked on Julian's first board
10.25" x 32.26"
14" or 14.5" wb
Modern measurements would be 7.125" tail, 6.375" or 5.875" nose
Had rocker concave

I overpaid for the reissue with the intent that I was gonna ride it but it's super big. An absolute boat. I didn't think I could actually fuck with it but I never realized it had such a short wb. Now I'm thinking about it. I always wanted it when it was current but no shop ever got it in near me. It's a sick wall hanger nonetheless.

[jtrpma]

Slept on Dane's shape for what feels like years. Finally gave it a shot and I am now filled with undying regret.

Regret for not buying it earlier or for having one?

That thing is fun

[texasplant]

Expand Quote

Slept on Dane's shape for what feels like years. Finally gave it a shot and I am now filled with undying regret.

[close]

Regret for not buying it earlier or for having one?

That thing is fun

After cruising around after an injury on my Dane1, its got me wanting to chuck some conical fulls on and skate it every day. Not sure if I like 1/8" risers with it though, considering 1/4" but have never skated them.

[jtrpma]

To me 1/4s on aces feel great, on indies a little tall and I need extra width with it too. 169 on 1/4s is okay on 159’s to tippy.

The Dane is fun, I guess rightfully one of the most popular big shapes at the moment.

[mynameisnotjeff]

Expand Quote

Stumbled across this and thought you guys might be stroked on Julian's first board
10.25" x 32.26"
14" or 14.5" wb
Modern measurements would be 7.125" tail, 6.375" or 5.875" nose
Had rocker concave

[close]

I overpaid for the reissue with the intent that I was gonna ride it but it's super big. An absolute boat. I didn't think I could actually fuck with it but I never realized it had such a short wb. Now I'm thinking about it. I always wanted it when it was current but no shop ever got it in near me. It's a sick wall hanger nonetheless.

Wow, that width and small WB sound fun. Really hope they rerelease the board

[rupertspupkin]

Expand Quote

Slept on Dane's shape for what feels like years. Finally gave it a shot and I am now filled with undying regret.

[close]

Regret for not buying it earlier or for having one?

That thing is fun

Regret for not buying it earlier. It is quite literally the perfect skateboard.

[rupertspupkin]

Expand Quote

Expand Quote

Slept on Dane's shape for what feels like years. Finally gave it a shot and I am now filled with undying regret.

[close]

Regret for not buying it earlier or for having one?

That thing is fun

[close]

After cruising around after an injury on my Dane1, its got me wanting to chuck some conical fulls on and skate it every day. Not sure if I like 1/8" risers with it though, considering 1/4" but have never skated them.

Do it. 1/4' riser, conicals, and some 55s.

[satan]

Expand Quote

Stumbled across this and thought you guys might be stroked on Julian's first board
10.25" x 32.26"
14" or 14.5" wb
Modern measurements would be 7.125" tail, 6.375" or 5.875" nose
Had rocker concave

[close]

I overpaid for the reissue with the intent that I was gonna ride it but it's super big. An absolute boat. I didn't think I could actually fuck with it but I never realized it had such a short wb. Now I'm thinking about it. I always wanted it when it was current but no shop ever got it in near me. It's a sick wall hanger nonetheless.

I didn't even know there was a reissue. When was it? NHS?
I'm not really a wallhanger/collector kinda guy but no way would I ride that board. It's too cool as a wallhanger!! I'd think about it if I had 2. Maybe.

[Hefe43]

Expand Quote

Expand Quote

Stumbled across this and thought you guys might be stroked on Julian's first board
10.25" x 32.26"
14" or 14.5" wb
Modern measurements would be 7.125" tail, 6.375" or 5.875" nose
Had rocker concave

[close]

I overpaid for the reissue with the intent that I was gonna ride it but it's super big. An absolute boat. I didn't think I could actually fuck with it but I never realized it had such a short wb. Now I'm thinking about it. I always wanted it when it was current but no shop ever got it in near me. It's a sick wall hanger nonetheless.

[close]

I didn't even know there was a reissue. When was it? NHS?
I'm not really a wallhanger/collector kinda guy but no way would I ride that board. It's too cool as a wallhanger!! I'd think about it if I had 2. Maybe.

I want to say they came out like 5/6 years ago. I got one and that shit warped like a motherfucker. Skated it for a hot minute but hated looking at it. Sick shape tho

[Garbagewagon]

Expand Quote

Expand Quote

Expand Quote

Stumbled across this and thought you guys might be stroked on Julian's first board
10.25" x 32.26"
14" or 14.5" wb
Modern measurements would be 7.125" tail, 6.375" or 5.875" nose
Had rocker concave

[close]

I overpaid for the reissue with the intent that I was gonna ride it but it's super big. An absolute boat. I didn't think I could actually fuck with it but I never realized it had such a short wb. Now I'm thinking about it. I always wanted it when it was current but no shop ever got it in near me. It's a sick wall hanger nonetheless.

[close]

I didn't even know there was a reissue. When was it? NHS?
I'm not really a wallhanger/collector kinda guy but no way would I ride that board. It's too cool as a wallhanger!! I'd think about it if I had 2. Maybe.

[close]

I want to say they came out like 5/6 years ago. I got one and that shit warped like a motherfucker. Skated it for a hot minute but hated looking at it. Sick shape tho

That Molotov does it for me. Such cool brand.

[jay_nev]

Added wheel wells to Dane1 for SS20. sexy

DANE 1 SPECIAL SHAPE - WITH WHEEL WELLS
9.75" (WIDEST POINT) X 31.375"
NOSE: 6.25"
WHEEL BASE: 14.125"
TAIL: 6.625"

 

[weon]

Baker 9.1x31.8 (if I remember correctly)
Venture 5.8 (stock w/ bones top washer)
F4 101 56mm classics

I picked this up last spring and had it set up with some Ace 55s and the same F4s. It was quickly relegated to strictly cruiser status, OJ Super Juice and all, I couldn’t pop the thing for shit. Shuffled some gear around (55s back onto my regular 8.5” set up) and threw these Ventures on if for no other reason than both deck and trucks were just laying around at that point. Long story short, I can finally skate this thing the way I originally intended. Neighborhood cruising, ollieing manholes, blasting out of curb cuts and the like. They just repaved most of my neighborhood so the streets are super smooth and the F4 101s are perfect. Probably not worth it to buy Ventures in the appropriate size, I’ll just keep these 5.8s on here a while until I want to use them again elsewhere.

isn't the wheelbase under 14" on that board? i wanted to try it for that reason but never found it

[jay_nev]

Expand Quote

Baker 9.1x31.8 (if I remember correctly)
Venture 5.8 (stock w/ bones top washer)
F4 101 56mm classics

I picked this up last spring and had it set up with some Ace 55s and the same F4s. It was quickly relegated to strictly cruiser status, OJ Super Juice and all, I couldn’t pop the thing for shit. Shuffled some gear around (55s back onto my regular 8.5” set up) and threw these Ventures on if for no other reason than both deck and trucks were just laying around at that point. Long story short, I can finally skate this thing the way I originally intended. Neighborhood cruising, ollieing manholes, blasting out of curb cuts and the like. They just repaved most of my neighborhood so the streets are super smooth and the F4 101s are perfect. Probably not worth it to buy Ventures in the appropriate size, I’ll just keep these 5.8s on here a while until I want to use them again elsewhere.

[close]

isn't the wheelbase under 14" on that board? i wanted to try it for that reason but never found it

width: 9.1"
length: 31.875"
wheelbase: 13.75"
nose: 7.25"
tail: 6.75

Crazy short wb!
 this dane1 14.125” already feels cramped and is gonna force me into something 14.5”+

[jay_nev]

Expand Quote

Expand Quote

Expand Quote

Slept on Dane's shape for what feels like years. Finally gave it a shot and I am now filled with undying regret.

[close]

Regret for not buying it earlier or for having one?

That thing is fun

[close]

After cruising around after an injury on my Dane1, its got me wanting to chuck some conical fulls on and skate it every day. Not sure if I like 1/8" risers with it though, considering 1/4" but have never skated them.

[close]

Do it. 1/4' riser, conicals, and some 55s.

howre the 1/4” riders going to mess with the pop? From no riser to 1/8” with indys on dane1 I feel less snappy

[satan]

Expand Quote

Expand Quote

Baker 9.1x31.8 (if I remember correctly)
Venture 5.8 (stock w/ bones top washer)
F4 101 56mm classics

I picked this up last spring and had it set up with some Ace 55s and the same F4s. It was quickly relegated to strictly cruiser status, OJ Super Juice and all, I couldn’t pop the thing for shit. Shuffled some gear around (55s back onto my regular 8.5” set up) and threw these Ventures on if for no other reason than both deck and trucks were just laying around at that point. Long story short, I can finally skate this thing the way I originally intended. Neighborhood cruising, ollieing manholes, blasting out of curb cuts and the like. They just repaved most of my neighborhood so the streets are super smooth and the F4 101s are perfect. Probably not worth it to buy Ventures in the appropriate size, I’ll just keep these 5.8s on here a while until I want to use them again elsewhere.

[close]

isn't the wheelbase under 14" on that board? i wanted to try it for that reason but never found it

[close]

width: 9.1"
length: 31.875"
wheelbase: 13.75"
nose: 7.25"
tail: 6.75

Crazy short wb!
 this dane1 14.125” already feels cramped and is gonna force me into something 14.5”+

It looks fun to me. Maybe some accidental nose mannies at first..
Almost a football shape but not too pointy?
Is the newer Tfunk shape the same?
What about the Deathwish 9.1?
Baker footballs are different? The por vida and baker 4 stuff
Any BBS shop decks using a similar shape/dimensions?