The Set-up Thread

[blueskynoise]

Expand Quote

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

[close]

This is exactly how I gripped my new setup. I think it looks good. Also I really like the shape of the board. I wonder if they are going to stick with BBS or just use them occasionally.

You left the side peeking out, or your grip is wrinkled? Ha.

Yeah I really dig the shape as well. A bit fuller tail than the Quasi proto shape I was on before. Plus the wood is crispy as hell. Those were my only complaints with Quasi and if they stick with BBS i’ll probably never skate another board brand

[Boog]

Expand Quote

Expand Quote

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

[close]

This is exactly how I gripped my new setup. I think it looks good. Also I really like the shape of the board. I wonder if they are going to stick with BBS or just use them occasionally.

[close]

You left the side peeking out, or your grip is wrinkled? Ha.

Yeah I really dig the shape as well. A bit fuller tail than the Quasi proto shape I was on before. Plus the wood is crispy as hell. Those were my only complaints with Quasi and if they stick with BBS i’ll probably never skate another board brand

Lol I don't have a wrinkle this time luckily. I was talking about the side peeking out. Same side too. I wanna try the BBS quasi.

[alraunen]

-Polar 9 14.5 Wheelbase
-ACE AF1 66 with bones hard bushings
-Spitfire 55MM 99A tablets
-Bronson G3
-Modus Risers
-MOB

First time riding ACEs and loved the turn and the way they grind. Also it's my first time with Bronson's and they are great out of the box.

[big_kev_215]

Heroin 9.75 symetrical egg
Mob grip
Indy Ti 169s w/ Indy blue bushings
99/53 Spit F4 tablets
Swiss 6 bearings
7/8 hardware

I ended up going wild and put together a Christmas complete for this monster. Was able to make a standard 9 inch sheet of grip work with this pattern.

169 Ti’s are the truth.  Best fun yet functional truck I’ve skated in a while. 

[manysnakes]

Expand Quote

Heroin 9.75 symetrical egg
Mob grip
Indy Ti 169s w/ Indy blue bushings
99/53 Spit F4 tablets
Swiss 6 bearings
7/8 hardware

I ended up going wild and put together a Christmas complete for this monster. Was able to make a standard 9 inch sheet of grip work with this pattern.

[close]

169 Ti’s are the truth.  Best fun yet functional truck I’ve skated in a while.

Agreed on that. The titanium Indy is the best version of the best truck ever made IMO. If you can afford then and skate Indys, you absolutely should buy them.

[Frank and Fred]

-Polar 9 14.5 Wheelbase
-ACE AF1 66 with bones hard bushings
-Spitfire 55MM 99A tablets
-Bronson G3
-Modus Risers
-MOB

First time riding ACEs and loved the turn and the way they grind. Also it's my first time with Bronson's and they are great out of the box.

That deck/ truck combo is a perfect candidate for wheel wells. Looks amazing.

[downtodevin]

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

I’m about to build a complete and live in a cold climate. Any suggestions on a good grip tape for the cold weather? Is Jessup better?

[Boog]

Expand Quote

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

[close]

I’m about to build a complete and live in a cold climate. Any suggestions on a good grip tape for the cold weather? Is Jessup better?

I'd get jessup ultra. Nice and grippy like mob but won't peel off in the cold.

[hobochimp]

Expand Quote

Expand Quote

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

[close]

This is exactly how I gripped my new setup. I think it looks good. Also I really like the shape of the board. I wonder if they are going to stick with BBS or just use them occasionally.

[close]

You left the side peeking out, or your grip is wrinkled? Ha.

Yeah I really dig the shape as well. A bit fuller tail than the Quasi proto shape I was on before. Plus the wood is crispy as hell. Those were my only complaints with Quasi and if they stick with BBS i’ll probably never skate another board brand

Are the BBS quasi’s as mellow as the ps ones? I kinda liked that about quasi

[munchbox]

Expand Quote

Expand Quote

Expand Quote

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

[close]

This is exactly how I gripped my new setup. I think it looks good. Also I really like the shape of the board. I wonder if they are going to stick with BBS or just use them occasionally.

[close]

You left the side peeking out, or your grip is wrinkled? Ha.

Yeah I really dig the shape as well. A bit fuller tail than the Quasi proto shape I was on before. Plus the wood is crispy as hell. Those were my only complaints with Quasi and if they stick with BBS i’ll probably never skate another board brand

[close]

Are the BBS quasi’s as mellow as the ps ones? I kinda liked that about quasi

^^^
this and the front/rear truck widths were bound to be different....whats the measurements?

[blueskynoise]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Please don’t judge my grip job haha

Quasi 8.25 14.25 WB (BBS!!!)
Ace AF1 44
Spitfire conical full 54mm 99a
Bones swiss 6
Bronze allen hardware
Mob grip in the winter is just garbage, what gives?!

[close]

This is exactly how I gripped my new setup. I think it looks good. Also I really like the shape of the board. I wonder if they are going to stick with BBS or just use them occasionally.

[close]

You left the side peeking out, or your grip is wrinkled? Ha.

Yeah I really dig the shape as well. A bit fuller tail than the Quasi proto shape I was on before. Plus the wood is crispy as hell. Those were my only complaints with Quasi and if they stick with BBS i’ll probably never skate another board brand

[close]

Are the BBS quasi’s as mellow as the ps ones? I kinda liked that about quasi

[close]

^^^
this and the front/rear truck widths were bound to be different....whats the measurements?

Still a really flat nose and tail, the center rails of the board might be kicked up a hair higher but it’s also brand new.

Front truck: 8.25”
Back truck: 8.1875”

[TastyBurrito]

Relieved my work stress by adding another to the queue.





Krooked Gonz Sweatpants 9.81
Ace 55 Classics
Bones Swiss
Spitfire 58mm Conical Full 99a
Diamond 1" Allen
Mob

[iw0]

Relieved my work stress by adding another to the queue.





Krooked Gonz Sweatpants 9.81
Ace 55 Classics
Bones Swiss
Spitfire 58mm Conical Full 99a
Diamond 1" Allen
Mob

slick, is that the 'blacklight' version?

[roba]

snack 8.38 x 32, 14.25 wb
44 classics
97 f4 classics 56mm (~52mm now)
reds, jessup, diamond 7/8 allen
superstar 80s, they skate great but the stitching isn’t reinforced so they’re basically superglued together

i bought two snack 8.38s because i thought they would be the same shape (the other one is the alehsy lambo graphic) but they aren’t, not even the same wood. this one is a little longer, the top ply had a “K8” engraving and a sticker with the sizing (wheelbase was inaccurate, it said 14.375 but i measured it and it’s 14.25), nothing else. anybody know what’s the woodshop?

[FrozenIndustries]

snack 8.38 x 32, 14.25 wb
44 classics
97 f4 classics 56mm (~52mm now)
reds, jessup, diamond 7/8 allen
superstar 80s, they skate great but the stitching isn’t reinforced so they’re basically superglued together

i bought two snack 8.38s because i thought they would be the same shape (the other one is the alehsy lambo graphic) but they aren’t, not even the same wood. this one is a little longer, the top ply had a “K8” engraving and a sticker with the sizing (wheelbase was inaccurate, it said 14.375 but i measured it and it’s 14.25), nothing else. anybody know what’s the woodshop?

Clutch. They stamp the tops with the shape code like that.

Looks great.

[FatGuy92]

snack 8.38 x 32, 14.25 wb
44 classics
97 f4 classics 56mm (~52mm now)
reds, jessup, diamond 7/8 allen
superstar 80s, they skate great but the stitching isn’t reinforced so they’re basically superglued together

i bought two snack 8.38s because i thought they would be the same shape (the other one is the alehsy lambo graphic) but they aren’t, not even the same wood. this one is a little longer, the top ply had a “K8” engraving and a sticker with the sizing (wheelbase was inaccurate, it said 14.375 but i measured it and it’s 14.25), nothing else. anybody know what’s the woodshop?

I think Clutch

https://www.clutchdistribution.com/popsicle.html

[Ok]

snack 8.38 x 32, 14.25 wb
44 classics
97 f4 classics 56mm (~52mm now)
reds, jessup, diamond 7/8 allen
superstar 80s, they skate great but the stitching isn’t reinforced so they’re basically superglued together

i bought two snack 8.38s because i thought they would be the same shape (the other one is the alehsy lambo graphic) but they aren’t, not even the same wood. this one is a little longer, the top ply had a “K8” engraving and a sticker with the sizing (wheelbase was inaccurate, it said 14.375 but i measured it and it’s 14.25), nothing else. anybody know what’s the woodshop?

Damn that looks nice as hell

[roba]

Expand Quote

snack 8.38 x 32, 14.25 wb
44 classics
97 f4 classics 56mm (~52mm now)
reds, jessup, diamond 7/8 allen
superstar 80s, they skate great but the stitching isn’t reinforced so they’re basically superglued together

i bought two snack 8.38s because i thought they would be the same shape (the other one is the alehsy lambo graphic) but they aren’t, not even the same wood. this one is a little longer, the top ply had a “K8” engraving and a sticker with the sizing (wheelbase was inaccurate, it said 14.375 but i measured it and it’s 14.25), nothing else. anybody know what’s the woodshop?

[close]

I think Clutch

https://www.clutchdistribution.com/popsicle.html

thank you and @Macho Taildrop for the quick response, from what i've read clutch isn't that great but hopefully this one won't break before the end of the year, i'm not going to skate too often because it started snowing in the last few days and i can't afford to skate the indoor park more often than twice a week, plus it's a hour and a half from my home. hoped it would be south central but oh well.

[user18081971]

I like Clutch. I feel like their boards are really light compared to bbs.

[baggy spandex]

snack 8.38 x 32, 14.25 wb
44 classics
97 f4 classics 56mm (~52mm now)
reds, jessup, diamond 7/8 allen
superstar 80s, they skate great but the stitching isn’t reinforced so they’re basically superglued together

i bought two snack 8.38s because i thought they would be the same shape (the other one is the alehsy lambo graphic) but they aren’t, not even the same wood. this one is a little longer, the top ply had a “K8” engraving and a sticker with the sizing (wheelbase was inaccurate, it said 14.375 but i measured it and it’s 14.25), nothing else. anybody know what’s the woodshop?

Beauty.

[lilboosie]

quasi proto 8.5

spitfire lock ins 55mm (i just want classics)

rusted swiss bearings

animal crossing ace af1 55

mob     
lots of colors i know

[antarctica]

trying something new lol

frog 8.25
thunder 147 standards
spitfire 54 101 classics
bronze
jessup

[rocklobster]

quasi proto 8.5

spitfire lock ins 55mm (i just want classics)

rusted swiss bearings

animal crossing ace af1 55

mob     
lots of colors i know

Color me surprised, but those trucks look good. Custom paint job?

[FrozenIndustries]

X-Post from the big boy thread.

Joined the 9" popsicle club.



Hockey 9"
Ace 55 classic with 1/8" risers
F4 OG Classic 58mm
Shortys/Jessup/Reds

Had a really nice session first on this.

[big_kev_215]

X-Post from the big boy thread.

Expand Quote

Joined the 9" popsicle club.



Hockey 9"
Ace 55 classic with 1/8" risers
F4 OG Classic 58mm
Shortys/Jessup/Reds

Had a really nice session first on this.

[close]

Looking good!  I picked up a 9.25” Heroin popsicle to set up next.  Never went bigger than 8.75” in the popsicle shape category but it looks like a curb/slappy dream. 

[FrozenIndustries]

Expand Quote

X-Post from the big boy thread.

Expand Quote

Joined the 9" popsicle club.



Hockey 9"
Ace 55 classic with 1/8" risers
F4 OG Classic 58mm
Shortys/Jessup/Reds

Had a really nice session first on this.

[close]

[close]

Looking good!  I picked up a 9.25” Heroin popsicle to set up next.  Never went bigger than 8.75” in the popsicle shape category but it looks like a curb/slappy dream.

It's super fun. I tried the same shape (Orange Eagle) a while ago and hated it, I think because I went with too small a wheel. But this combo is super good. I mostly skate curbs, but I am sort of surprised by how good this feels for my flat ground tricks.

[lilboosie]

Expand Quote

quasi proto 8.5

spitfire lock ins 55mm (i just want classics)

rusted swiss bearings

animal crossing ace af1 55

mob     
lots of colors i know

[close]

Color me surprised, but those trucks look good. Custom paint job?

Thanks!! I had paint left over from a project related to the design. So I said f it when I got af1s. It was a test. Same with the quasi. I can't wait to plan something to go together even thought it would be for one set up. Gonna have to skate this pair to death first. Or get a curb/9 in egg setup .....

[CannerSpaghetti]

Expand Quote

Expand Quote

quasi proto 8.5

spitfire lock ins 55mm (i just want classics)

rusted swiss bearings

animal crossing ace af1 55

mob     
lots of colors i know

[close]

Color me surprised, but those trucks look good. Custom paint job?

[close]

Thanks!! I had paint left over from a project related to the design. So I said f it when I got af1s. It was a test. Same with the quasi. I can't wait to plan something to go together even thought it would be for one set up. Gonna have to skate this pair to death first. Or get a curb/9 in egg setup .....

You some kind of animal crossing superfan? I support it though

[yourbreakfsat]

Expand Quote

Expand Quote

quasi proto 8.5

spitfire lock ins 55mm (i just want classics)

rusted swiss bearings

animal crossing ace af1 55

mob     
lots of colors i know

[close]

Color me surprised, but those trucks look good. Custom paint job?

[close]

Thanks!! I had paint left over from a project related to the design. So I said f it when I got af1s. It was a test. Same with the quasi. I can't wait to plan something to go together even thought it would be for one set up. Gonna have to skate this pair to death first. Or get a curb/9 in egg setup .....

That's so sick. What did you do to make the paint job come out so smooth?

[munchbox]

Expand Quote

Expand Quote

Expand Quote

quasi proto 8.5

spitfire lock ins 55mm (i just want classics)

rusted swiss bearings

animal crossing ace af1 55

mob     
lots of colors i know

[close]

Color me surprised, but those trucks look good. Custom paint job?

[close]

Thanks!! I had paint left over from a project related to the design. So I said f it when I got af1s. It was a test. Same with the quasi. I can't wait to plan something to go together even thought it would be for one set up. Gonna have to skate this pair to death first. Or get a curb/9 in egg setup .....

[close]

That's so sick. What did you do to make the paint job come out so smooth?

seconded
need the process, paint brand, etc