The Set-up Thread

[weon]

wknd 8.25ish
ace 44
oski spitfire f4 54 conical full
swiss

nice deck man. i dig the matching nuts—it's the little things.

[BMCsteve]

Madness 8.75 Impact (14.75wb, tapers to an 8.6 over the rear trucks)
Indy 159 Titanium with aftermarket cylinder bushings and Riptide pivot cups
54mm F4 Classics 99a
Swiss 6
Mob
Silverados

There are a lot of nice details on the Madness decks.  The graphic is made of raised dots that act like somewhat like a slick and it has this crazy pearl inlay on the bottom ply.  Completely unnecessary but it looks pretty rad

[shit_for_brains]

ok

[brucewillis]

Expand Quote

Unfortunately, I just couldn't jive with the Roger I posted a few weeks ago. (not mad that I gave them my money though, stoked they're back) So I set up the board I was riding prior to that, which met it's demise yesterday during a cold, misty session.

That said, stoked on this one I just put together. It's been a minute since I've had a Scum Co, and years since my last set of PFC.



Scumco Brian Downey 8.25 (though it measures 8.38 at its widest)
Ace 44's
Prize Fighter Cutlery 54mm 101a w/ a Radial shape to them.
Bones Swiss

[close]

Funny, instead of buying a roger from the new line I ended up buying a 8.3 scumco from nocturnal on a skate trip hahaha

This board just look beautiful

[Budgie Lasek]

Any of the set ups go well with a Manchester cupsole?

[nopes]

Expand Quote

wknd 8.25ish
ace 44
oski spitfire f4 54 conical full
swiss

[close]

nice deck man. i dig the matching nuts—it's the little things.

That was totally unintentional. I was going to do a fucked up sloppy over the bolts grip job to fuck with my grip tape art friends but when I realized the bolts were practically the same color I couldn’t go through with it.

[Seadramon]

That pearl inlay is rad.

[the canadian suit]

new deck, same other shit.
My last set of raw thunder's. ):  DLX if you're listening, lemme get some raw 147's
formula fours 53mm
reds ceramics

[Noble Experiment]

Usually the last thing I'd probably go for but one of the locals here whos flow for DGK offered to hook it up with a new deck for super cheap, I decided to say fuck it and try one out. After skating nothing but B16s for so long this was a little hard to get used to at first, definitely a lot steeper and more concaved than a B16, and I wasn't sure if I liked it or not but I had a great sesh on this last night that completely changed my mind, it feels great now after I got used to it.

DGK 8.5
Indy 149s with Doh Doh bushings
STF Bones 54mm
Random assortment of bearings
 Indy hardware
Jessup
OG Cons Chucks black and white

[Fredonskateboard]

Broke my board... Got a new today.
Real 8.12.
Thunder 147 Hollow lights
Spitfire formula 4 50mm
Bones swiss ceramic
Bones bushings

[hmmmokay]

Expand Quote

Unfortunately, I just couldn't jive with the Roger I posted a few weeks ago. (not mad that I gave them my money though, stoked they're back) So I set up the board I was riding prior to that, which met it's demise yesterday during a cold, misty session.

That said, stoked on this one I just put together. It's been a minute since I've had a Scum Co, and years since my last set of PFC.

Scumco Brian Downey 8.25 (though it measures 8.38 at its widest)
Ace 44's
Prize Fighter Cutlery 54mm 101a w/ a Radial shape to them.
Bones Swiss

[close]

thats a sweet deck.  how does it ride?

It has great concave overall, although the nose and tail are somehow on the flat side, which I'm quickly finding out is something I really like about it. It's very poppy and rigid. Definitely would grab this exact same deck after this one is done if I had the choice.

[myfeetarekillingme]

Broke my board... Got a new today.
Real 8.12.
Thunder 147 Hollow lights
Spitfire formula 4 50mm
Bones swiss ceramic
Bones bushings

I might be in the minority but I think the Real oval graphics look cool, especially on those stained wood backgrounds. Also, can I have some money?

[ungzilla]

current and next up

both w/ thunder 149 ti lights
quasi jj 8.5
random ass bearings
spitfire f4 101a x 52mm

weird marks due to trying to learn bennett grinds i'm sorry everyone

[Fredonskateboard]

Expand Quote

Broke my board... Got a new today.
Real 8.12.
Thunder 147 Hollow lights
Spitfire formula 4 50mm
Bones swiss ceramic
Bones bushings

[close]

I might be in the minority but I think the Real oval graphics look cool, especially on those stained wood backgrounds. Also, can I have some money?

I paid $120 for the bearings 3 years ago! I find that rather cheap, considering a board costs $95...
#LifeinNorway

Dont care too much  for board graphics. However, id pick a pro board over a regular oval, but the store dident have any in 8.12, or even above that.

[myfeetarekillingme]

Expand Quote

Expand Quote

Broke my board... Got a new today.
Real 8.12.
Thunder 147 Hollow lights
Spitfire formula 4 50mm
Bones swiss ceramic
Bones bushings

[close]

I might be in the minority but I think the Real oval graphics look cool, especially on those stained wood backgrounds. Also, can I have some money?

[close]

I paid $120 for the bearings 3 years ago! I find that rather cheap, considering a board costs $95...
#LifeinNorway

Dont care too much  for board graphics. However, id pick a pro board over a regular oval, but the store dident have any in 8.12, or even above that.

Either way, nice setup. How does the dlx 8.12 feel compared to other 8.12 decks? Haven't had a dlx deck in a while but I heard somewhere on here they tend to feel a little bigger.

[Xen]

Unfortunately, I just couldn't jive with the Roger I posted a few weeks ago. (not mad that I gave them my money though, stoked they're back) So I set up the board I was riding prior to that, which met it's demise yesterday during a cold, misty session.

That said, stoked on this one I just put together. It's been a minute since I've had a Scum Co, and years since my last set of PFC.



Scumco Brian Downey 8.25 (though it measures 8.38 at its widest)
Ace 44's
Prize Fighter Cutlery 54mm 101a w/ a Radial shape to them.
Bones Swiss

Have a gnar.

[TatoConyo]

Fucking Awesome board 8.5
Mob Grip
Thunder 151
Bones Stf
Some cheap Indy bearings
Indy Hardware

[Deekay]

*Pic of two boards, two boards with jake's moms fucking face on em*

current and next up

both w/ thunder 149 ti lights
quasi jj 8.5
random ass bearings
spitfire f4 101a x 52mm

weird marks due to trying to learn bennett grinds i'm sorry everyone

Very nice setups and accurate slap etiquette. I can tell you're gonna go far in life, kid.

[shit_for_brains]

I don't care about slide marks anymore

[CoMpLeMeNts4U]

Expand Quote

*Pic of two boards, two boards with jake's moms fucking face on em*

current and next up

both w/ thunder 149 ti lights
quasi jj 8.5
random ass bearings
spitfire f4 101a x 52mm

weird marks due to trying to learn bennett grinds i'm sorry everyone

[close]

Very nice setups and accurate slap etiquette. I can tell you're gonna go far in life, kid.

Please sir I was wondering if you could leave the compliments to me? Im trying to learn and you are so much better than me at it already due to your higher mental capacity for abstract thinking and extremely likeable personality  . So if you keep complimenting everyone, they will realize how bad I am at it  in comparison and my compliments will be worthless.

[pinkbananastatus]

Expand Quote

Expand Quote

Unfortunately, I just couldn't jive with the Roger I posted a few weeks ago. (not mad that I gave them my money though, stoked they're back) So I set up the board I was riding prior to that, which met it's demise yesterday during a cold, misty session.

That said, stoked on this one I just put together. It's been a minute since I've had a Scum Co, and years since my last set of PFC.

Scumco Brian Downey 8.25 (though it measures 8.38 at its widest)
Ace 44's
Prize Fighter Cutlery 54mm 101a w/ a Radial shape to them.
Bones Swiss

[close]

thats a sweet deck.  how does it ride?

[close]

It has great concave overall, although the nose and tail are somehow on the flat side, which I'm quickly finding out is something I really like about it. It's very poppy and rigid. Definitely would grab this exact same deck after this one is done if I had the choice.

The Scumco deep dish shape in an 8.5 is my favorite shape of all time. All my consistency problems disappear on this board

[myfeetarekillingme]

Habitat 8.25
Thunder 148 Team Hollows
51mm Spitfire F4 101d
Misc bearings
Mob

Lakai Fremont

[olan.is.rollin]

10.5 blood wizard jerry gurney model (just snapped)
169 red hollows indys
1/4 risers
bronson g2 bearings with no shields
58mm conical full spits f4
jessup grip cuz the shop didnt have mob

[calvinsdream]

Expand Quote

Expand Quote

*Pic of two boards, two boards with jake's moms fucking face on em*

current and next up

both w/ thunder 149 ti lights
quasi jj 8.5
random ass bearings
spitfire f4 101a x 52mm

weird marks due to trying to learn bennett grinds i'm sorry everyone

[close]

Very nice setups and accurate slap etiquette. I can tell you're gonna go far in life, kid.

[close]

Please sir I was wondering if you could leave the compliments to me? Im trying to learn and you are so much better than me at it already due to your higher mental capacity for abstract thinking and extremely likeable personality  . So if you keep complimenting everyone, they will realize how bad I am at it  in comparison and my compliments will be worthless.

Trolling or not your account is just weird

[ballintoohard]

My buddy from elementary/middle school did the graphic for this. I know the shape is DLX, really need to find out what other models it's on because it feels like the best all around setup I've had.

35 North shop deck 8.25, 14.18 wheelbase
Indy 149, aftermarket Indy bushings
Spitfire Conical full 54 worn to ~52.5
Bones Swiss Ceramics
Shorty's Silverados

[potpie]

10.5 blood wizard jerry gurney model (just snapped)
169 red hollows indys
1/4 risers
bronson g2 bearings with no shields
58mm conical full spits f4
jessup grip cuz the shop didnt have mob

looks nice

[tzhangdox]

My buddy from elementary/middle school did the graphic for this. I know the shape is DLX, really need to find out what other models it's on because it feels like the best all around setup I've had.

35 North shop deck 8.25, 14.18 wheelbase
Indy 149, aftermarket Indy bushings
Spitfire Conical full 54 worn to ~52.5
Bones Swiss Ceramics
Shorty's Silverados

35th North shop boards are done so well. Sickest graphics, nice shapes and generator wood for the price of a shop board.

[ballintoohard]

I get sent up there for work often enough to where I can just continue to buy this same width and always get the same shape which is rad.

[TwisT]

it's been raining all day week.

DGK 8.25
Destructo Trucks
Bones STF V2 53mm
Bones Swiss bear
State Harlems - which are currently eating in to the back of my ankle...

This graphic is so good!

[Seadramon]

it's been raining all day week.

DGK 8.25
Destructo Trucks
Bones STF V2 53mm
Bones Swiss bear
State Harlems - which are currently eating in to the back of my ankle...

This graphic is so good!

I'm always the most stoked for your setups