The Set-up Thread

[augustmoon]

Expand Quote

  first Tum Yeto in about 20 years; my fault for forgetting how shitty they are

bitter old man rant over.

[close]

Board construction has improved in the last 2 decades and they aren't made where they were back then. Did you get one of the China pressed decks? Got several complaints about those ones at the shop. They're back to the PS Stix boards again - I think the China decks may have just been so they could get stock. I'm not a fan of the PS ones though, they're super flat with weird shapes.

it feels like it.  i got this from my local, but had to order online for pickup due to covid.  it looked like colored wood grain in the photo, and the other one's i've seen online looked like that too, but this one is definitely different.  the wood grain on the top ply looked irregular and sloppy if that makes sense. 

if anyone remembers those Goodwood/Bummer High decks from the mid 2000s, it reminds me of one of those. 

i've got a Quasi and a Hopps gripped and ready to go, but i just cant justify wasting 60 bucks so i'll try to get the most I can out of it 

[MalHuis]

strange that the complete bottom is painted.

All the ps wood fists ive seen have been on a wood grain (stained). I've got a TM fists board in grey wood grain on the wall at home. Defs ps stix, 8.5. strange 8.5 shape but i think i'll like it when i set it up.

[Sativa Lung]

it feels like it.  i got this from my local, but had to order online for pickup due to covid.  it looked like colored wood grain in the photo, and the other one's i've seen online looked like that too, but this one is definitely different.  the wood grain on the top ply looked irregular and sloppy if that makes sense. 

if anyone remembers those Goodwood/Bummer High decks from the mid 2000s, it reminds me of one of those. 

i've got a Quasi and a Hopps gripped and ready to go, but i just cant justify wasting 60 bucks so i'll try to get the most I can out of it 

Is it one of the unstained tops? I saw pics of some of those on one of the warehouse/ccs type sites and they looked like they had ASF/clutch stamps. Just FYI if it's a PS deck then your quasi is going to be the same wood.


Unrelated crowd sourcing request -

This lotti deck is so much FUN that I'm in the market for a football that's closer to my normal (8.25/8.38) size. Im looking at the enjoi Deedz shape and the Cromer "lil snuff" but if anyone knows of other 8.25-8.5 footballs let me know. Preferably on the short side, 31.5-31.75 (tip to tip, no concave) is my sweet spot.

[moonordie]

Expand Quote

Expand Quote

  first Tum Yeto in about 20 years; my fault for forgetting how shitty they are

bitter old man rant over.

[close]

Board construction has improved in the last 2 decades and they aren't made where they were back then. Did you get one of the China pressed decks? Got several complaints about those ones at the shop. They're back to the PS Stix boards again - I think the China decks may have just been so they could get stock. I'm not a fan of the PS ones though, they're super flat with weird shapes.

[close]

it feels like it.  i got this from my local, but had to order online for pickup due to covid.  it looked like colored wood grain in the photo, and the other one's i've seen online looked like that too, but this one is definitely different.  the wood grain on the top ply looked irregular and sloppy if that makes sense. 

if anyone remembers those Goodwood/Bummer High decks from the mid 2000s, it reminds me of one of those. 

Sweet mother of God, those were the worst pieces of crap ever.

[FrozenIndustries]

Expand Quote

it feels like it.  i got this from my local, but had to order online for pickup due to covid.  it looked like colored wood grain in the photo, and the other one's i've seen online looked like that too, but this one is definitely different.  the wood grain on the top ply looked irregular and sloppy if that makes sense. 

if anyone remembers those Goodwood/Bummer High decks from the mid 2000s, it reminds me of one of those. 

i've got a Quasi and a Hopps gripped and ready to go, but i just cant justify wasting 60 bucks so i'll try to get the most I can out of it 

[close]

Is it one of the unstained tops? I saw pics of some of those on one of the warehouse/ccs type sites and they looked like they had ASF/clutch stamps. Just FYI if it's a PS deck then your quasi is going to be the same wood.


Unrelated crowd sourcing request -

This lotti deck is so much FUN that I'm in the market for a football that's closer to my normal (8.25/8.38) size. Im looking at the enjoi Deedz shape and the Cromer "lil snuff" but if anyone knows of other 8.25-8.5 footballs let me know. Preferably on the short side, 31.5-31.75 (tip to tip, no concave) is my sweet spot.

I know you probably already know, but most footballs skate a lot smaller than they actually are by like 1/2". So if you wanted something like a 8.25" I would recommend an 8.75" football like the Polar or the Enjoi Thaynan. But assuming you already know that and mean you legit want a football that maxes at 8.5", the AH Black Widown and Krooked Little Snuff both look super nice and everyone I've walked too who didn't think they were too small loved them. The Deedz board looks cool, and I have the slightly bigger Thaynan shape that I haven't skated yet. Darkroom prisms also looks sick. Widest is 8.75" but it has some pretty heavy duty taper.

https://drkrminc.com/collections/decks/products/prisma-skateboard-deck?variant=32146610847793

[GBLange]

Expand Quote

Expand Quote

it feels like it.  i got this from my local, but had to order online for pickup due to covid.  it looked like colored wood grain in the photo, and the other one's i've seen online looked like that too, but this one is definitely different.  the wood grain on the top ply looked irregular and sloppy if that makes sense. 

if anyone remembers those Goodwood/Bummer High decks from the mid 2000s, it reminds me of one of those. 

i've got a Quasi and a Hopps gripped and ready to go, but i just cant justify wasting 60 bucks so i'll try to get the most I can out of it 

[close]

Is it one of the unstained tops? I saw pics of some of those on one of the warehouse/ccs type sites and they looked like they had ASF/clutch stamps. Just FYI if it's a PS deck then your quasi is going to be the same wood.


Unrelated crowd sourcing request -

This lotti deck is so much FUN that I'm in the market for a football that's closer to my normal (8.25/8.38) size. Im looking at the enjoi Deedz shape and the Cromer "lil snuff" but if anyone knows of other 8.25-8.5 footballs let me know. Preferably on the short side, 31.5-31.75 (tip to tip, no concave) is my sweet spot.

[close]

I know you probably already know, but most footballs skate a lot smaller than they actually are by like 1/2". So if you wanted something like a 8.25" I would recommend an 8.75" football like the Polar or the Enjoi Thaynan. But assuming you already know that and mean you legit want a football that maxes at 8.5", the AH Black Widown and Krooked Little Snuff both look super nice and everyone I've walked too who didn't think they were too small loved them. The Deedz board looks cool, and I have the slightly bigger Thaynan shape that I haven't skated yet. Darkroom prisms also looks sick. Widest is 8.75" but it has some pretty heavy duty taper.

https://drkrminc.com/collections/decks/products/prisma-skateboard-deck?variant=32146610847793

yeah, the AH black widow is fun to skate in..pointy nose though..if the nose is shaped like the tail, it would be bangers..for me atleast..

[Ant]

Polar Sanbongi 8.5
Indy forged 149
Indy bolts
Andale bearings
Mob
Spitfire F4 99d were 54mm

[FROTHY]

Polar Sanbongi 8.5
Indy forged 149
Indy bolts
Andale bearings
Mob
Spitfire F4 99d were 54mm

Minor deduction for the Andale bearings. Otherwise, stellar.

[Ant]

Thats fair, they are on there because of blue shields. Also going to blue Indy bushings when they arrive.

[shpongle]

917 8.5 with 14.75 wheelbase (very long wb lol)
ace 44
spitfire 56mm f4 classic full (they dont make these style anymore)

interesting combo i think with the short ace wb but 14.75 deck wb. going to try it out tomorrow

[Sativa Lung]

I know you probably already know, but most footballs skate a lot smaller than they actually are by like 1/2". So if you wanted something like a 8.25" I would recommend an 8.75" football like the Polar or the Enjoi Thaynan. But assuming you already know that and mean you legit want a football that maxes at 8.5", the AH Black Widown and Krooked Little Snuff both look super nice and everyone I've walked too who didn't think they were too small loved them. The Deedz board looks cool, and I have the slightly bigger Thaynan shape that I haven't skated yet. Darkroom prisms also looks sick. Widest is 8.75" but it has some pretty heavy duty taper.

https://drkrminc.com/collections/decks/products/prisma-skateboard-deck?variant=32146610847793

Yeah I'm aware that they skate a lot smaller. I think part of what I'm really enjoying...sorry, having FUN... about this deck is just skating something smaller. The Cromer shape looks like the tail is pretty full compared to most footballs, so I'm kind of intrigued by that but the Deedz looks like its basically just a slightly scaled up version of the Lotti (dont know if its as flat though, I doubt it) so I'm kind of leaning in that direction. Unfortunately the graphics that are out right now are pretty lackluster... one is some weird Chris Haslam hat thing and the other just looks like a giant pickle or watermelon or something. I'd probably go for that Villani one if I could find one.

Also thanks for the link but I kind of hate darkroom. I'm not a Pendleton fan, his graphics don't appeal to me in any way. I don't think they're necessarily bad, but definitely not for me.

[FrozenIndustries]

Expand Quote

I know you probably already know, but most footballs skate a lot smaller than they actually are by like 1/2". So if you wanted something like a 8.25" I would recommend an 8.75" football like the Polar or the Enjoi Thaynan. But assuming you already know that and mean you legit want a football that maxes at 8.5", the AH Black Widown and Krooked Little Snuff both look super nice and everyone I've walked too who didn't think they were too small loved them. The Deedz board looks cool, and I have the slightly bigger Thaynan shape that I haven't skated yet. Darkroom prisms also looks sick. Widest is 8.75" but it has some pretty heavy duty taper.

https://drkrminc.com/collections/decks/products/prisma-skateboard-deck?variant=32146610847793

[close]

Yeah I'm aware that they skate a lot smaller. I think part of what I'm really enjoying...sorry, having FUN... about this deck is just skating something smaller. The Cromer shape looks like the tail is pretty full compared to most footballs, so I'm kind of intrigued by that but the Deedz looks like its basically just a slightly scaled up version of the Lotti (dont know if its as flat though, I doubt it) so I'm kind of leaning in that direction. Unfortunately the graphics that are out right now are pretty lackluster... one is some weird Chris Haslam hat thing and the other just looks like a giant pickle or watermelon or something. I'd probably go for that Villani one if I could find one.

Also thanks for the link but I kind of hate darkroom. I'm not a Pendleton fan, his graphics don't appeal to me in any way. I don't think they're necessarily bad, but definitely not for me.

Wow, a Pendleton hater. SAD!

JK, I like Mike Hill better but the shape looks cool to me. I have the Thaynan which is like a scaled up Deedz and it is the standard DSM mellow concave with "steep" kicks that aren't that crazy to me. So IDK if that helps. Haven't skated the Cromer but that general style of shape is super good (the Cards board I like is like a scaled up version). The round tail and the fact that it tapers to the front rule.

[FROTHY]

Not my typical setup. Just put something together to see what it was like.
8.25" socal blank. The bottom and top plies are both dark brown. Very nice. I'm going to be screen printing a small logo on this board using my wife's die cutting machine (see below), so that's my reason for getting a blank.
Venture 5.6.. Felt like buying a pair of these. I probably wont like them and will switch my Indys onto this.
44mm Boardy Cakes
Reds
Mob
Allen 7/8th hardware. Eww! Where are my philips?!?

I can already tell I'm not going to be able to skate this setup, just from standing on it in my living room. The pop is wayyy to mellow. First I'll try to put on some normal sized wheels. If that doesn't make the pop feel more normal, I'll have to put the Indy's on.

Logos I'm fiddling with are below. Dark blue is going to be too dark for this board but this is the general idea:

[TheLowerBack]

Not my typical setup. Just put something together to see what it was like.
8.25" socal blank. The bottom and top plies are both dark brown. Very nice. I'm going to be screen printing a small logo on this board using my wife's die cutting machine (see below), so that's my reason for getting a blank.
Venture 5.6.. Felt like buying a pair of these. I probably wont like them and will switch my Indys onto this.
44mm Boardy Cakes
Reds
Mob
Allen 7/8th hardware. Eww! Where are my philips?!?

I can already tell I'm not going to be able to skate this setup, just from standing on it in my living room. The pop is wayyy to mellow. First I'll try to put on some normal sized wheels. If that doesn't make the pop feel more normal, I'll have to put the Indy's on.

Logos I'm fiddling with are below. Dark blue is going to be too dark for this board but this is the general idea:

I dig the logo. Maybe the center one with the logo negative and the font the same color would pop.

[FROTHY]

@TheLowerBack that's a good suggestion. I like seeing woodgrain in negative space. I will probably attempt that.

[Sativa Lung]

I can already tell I'm not going to be able to skate this setup, just from standing on it in my living room. The pop is wayyy to mellow. First I'll try to put on some normal sized wheels. If that doesn't make the pop feel more normal, I'll have to put the Indy's on.

Are those socal blanks Clutch (letter+number stamp in front truck holes) or prime (size and mold code in back truck holes)? If it's a clutch some of them have longer (14.5) wheelbases standard so probably not the best deck for cast plate ventures. I like them best on 14.12 or 14.25 decks with mellow tails. Also if these are your first ventures be aware that the stock bushings are harder (94a) than most and they take a while to break in.

[ballintoohard]

Polar 8.375
Thunder Ti Lite 148 2 washers inside
Loophole 52
Bones Swiss 6 whatever
Some kind of Allen hardware

Love the deck, not sure if this is the ideal truck setup for me. Overal like the Thunders, but seem to have less pop/flick with them. Might be due to the lower height or longer WB not sure.

[FROTHY]

Expand Quote

I can already tell I'm not going to be able to skate this setup, just from standing on it in my living room. The pop is wayyy to mellow. First I'll try to put on some normal sized wheels. If that doesn't make the pop feel more normal, I'll have to put the Indy's on.

[close]

Are those socal blanks Clutch (letter+number stamp in front truck holes) or prime (size and mold code in back truck holes)? If it's a clutch some of them have longer (14.5) wheelbases standard so probably not the best deck for cast plate ventures. I like them best on 14.12 or 14.25 decks with mellow tails. Also if these are your first ventures be aware that the stock bushings are harder (94a) than most and they take a while to break in.

It had two indistinguishable numbers or letters stamped into the top by the bolts, so probably a clutch, but the wheelbase is 14.25".

I have an unopened set of Bones Big Balls, and I was tempted to put them on the boardy cakes because 1.) big balls on tiny wheels, and 2.) the light blue bearing shields would match the wheel graphic.
I ended up shelfing that idea and waiting to put the big balls on wheels that I'll actually skate.

[Diocletian]

SoCal blanks are clutch. I had one once, same nice looking brown stain. It was weird, had a real dry brittle feeling to it and whenever the sides of the plies scraped the ground they’d flake and splinter away real easy compared to a more solid/sealed feeling board that’s generator or south central.

[TimmyB88]

Love this one.
Creature willis kimbel 9.0
Indy 169 forged hollow
Oj hardline 55mm

[bigdave]

Love this one.
Creature willis kimbel 9.0
Indy 169 forged hollow
Oj hardline 55mm

That's sick. Well done. I should look up that board. WB?

[jay_nev]

Expand Quote

Love this one.
Creature willis kimbel 9.0
Indy 169 forged hollow
Oj hardline 55mm

[close]

That's sick. Well done. I should look up that board. WB?

that 15” wb and 33” right? Full NHS kit. Come to big boys thread

[TimmyB88]

Expand Quote

Expand Quote

Love this one.
Creature willis kimbel 9.0
Indy 169 forged hollow
Oj hardline 55mm

[close]

That's sick. Well done. I should look up that board. WB?

[close]

that 15” wb and 33” right? Full NHS kit. Come to big boys thread

Indeed on the measurement. And there is no way you can find these anymore. His boards go quick even not in a pandemic. It's called the "petroglyph" .
I will def check out that thread, thanks!

[MusclesMarinara]

So my Hook Ups board was stolen at the end of August down the shore. Put it near the door of the restaurant I was eating at and some kid snatched it. My buddy who never skates gave me this old dog shit Blind complete he had in his garage. Had these Bam Destructo's on them. Never had Destructo's but checked the bottom and saw "made in USA" and not the newer China made. Gave me an idea and try to make an all Bam USA complete. I know I'm about to Get kooked to hell for this but fuck it.

Funniest of all, they screened the graphic upside down, so the tail is the nose and the nose is the tail. I was all fucked up when I first started pushing on it. That's what I get for doing this shit though.







The Heart Supply Bam deck *primewood la*
Destructo Mid 5.25 *put all new hardware and bushings into them*
Bones Reds
52mm Element Wheels
Shortys Hardware
Jessup Grip

[rocklobster]

So my Hook Ups board was stolen at the end of August down the shore. Put it near the door of the restaurant I was eating at and some kid snatched it. My buddy who never skates gave me this old dog shit Blind complete he had in his garage. Had these Bam Destructo's on them. Never had Destructo's but checked the bottom and saw "made in USA" and not the newer China made. Gave me an idea and try to make an all Bam USA complete. I know I'm about to Get kooked to hell for this but fuck it.

Funniest of all, they screened the graphic upside down, so the tail is the nose and the nose is the tail. I was all fucked up when I first started pushing on it. That's what I get for doing this shit though.







The Heart Supply Bam deck *primewood la*
Destructo Mid 5.25 *put all new hardware and bushings into them*
Bones Reds
52mm Element Wheels
Shortys Hardware
Jessup Grip

This is the definition of Blursed.

(I'll post up my glow in the dark Bam x Destructo trucks later)

[TwisT]

How are those element wheels?

[SneakySecrets]

So my Hook Ups board was stolen at the end of August down the shore. Put it near the door of the restaurant I was eating at and some kid snatched it. My buddy who never skates gave me this old dog shit Blind complete he had in his garage. Had these Bam Destructo's on them. Never had Destructo's but checked the bottom and saw "made in USA" and not the newer China made. Gave me an idea and try to make an all Bam USA complete. I know I'm about to Get kooked to hell for this but fuck it.

I’d advise getting some sort of Bluetooth speaker so you can blast an endless loop of 96 quite bitter beings while you’re riding that bad boy.   

[MusclesMarinara]

 

How are those element wheels?

First time I've had them, they're decent, a bit jarring on rough asphalt. But super smooth on nicer surfaces, definitely more park wheels I'd say.

[MusclesMarinara]

This is the definition of Blursed.

(I'll post up my glow in the dark Bam x Destructo trucks later)

You ain't lying dude.

[somethingmustbreaknow]

So my Hook Ups board was stolen at the end of August down the shore. Put it near the door of the restaurant I was eating at and some kid snatched it. My buddy who never skates gave me this old dog shit Blind complete he had in his garage. Had these Bam Destructo's on them. Never had Destructo's but checked the bottom and saw "made in USA" and not the newer China made. Gave me an idea and try to make an all Bam USA complete. I know I'm about to Get kooked to hell for this but fuck it.

Funniest of all, they screened the graphic upside down, so the tail is the nose and the nose is the tail. I was all fucked up when I first started pushing on it. That's what I get for doing this shit though.



The Heart Supply Bam deck *primewood la*
Destructo Mid 5.25 *put all new hardware and bushings into them*
Bones Reds
52mm Element Wheels
Shortys Hardware
Jessup Grip

i gnar you for this muddy setup. so sick!