The Set-up Thread

[kneebone]

Heroin Very Big Egg 10"
Indy 215s with bones hard bushings and forged hollow baseplates
52mm F4 classics
Mob
Diamond hardware

how'd you get a jump on one of these so early?

[slappy50]

smallest board ive ridden to date since my first ever
krooked 8.6 14.7 wb
ace af1 66, 'bout normal tightness
spitfire conical full 97a down to 51mm ish
mob

haven't ridden the deck yet, but i gotta say the f4s and af1s are really good! i didnt like the 97a at first but now its grown on me, and i might have to get them again when its new wheel time. the af1s are really nice too, idk how theyre gonna feel on the smaller board so i might have to t*ghten them a little bit and loosen em off again as i get used to it

https://ibb.co/MPx7mjV
https://ibb.co/Y2hJtxX

[GBLange]

Frog Jesse Alba 8.75
Venture v lights 5.8
Oj nomads 95a
Bones big balls bearings
Halfcab pros

Having a lot of fun on this deck great pop flip tricks, not the best for nose and tail stalls on the mini ramp, would definitely buy a similar football shape like this again

nice setup. hows the nomads? thinking of trying those.

[vhsfisheye]

Expand Quote

Frog Jesse Alba 8.75
Venture v lights 5.8
Oj nomads 95a
Bones big balls bearings
Halfcab pros

Having a lot of fun on this deck great pop flip tricks, not the best for nose and tail stalls on the mini ramp, would definitely buy a similar football shape like this again

[close]

nice setup. hows the nomads? thinking of trying those.

If you want a soft wheel that you can still power slide on this aint it besides that lots of fun, great for really rough ground which is everywhere around here, bombing hills on them is scary tho

[Maccat]

DOA
144
53/101 Classics
Ceramics

Bunch of loose parts that fit well together instead of on other setups. This ones on the steep side. Pink top is cool, not had one in a while.

[Internet Skater]

Two killer setups! The Trake, MQ, and TIE stickers look so sick with those graphics ^

[Frank and Fred]

Uma "Thumb shape" 9" with 14 3/8 WB
AF1 55s
54mm 99a F4s
Swiss 6
Mix of regular Jessup and the weird Nike/ Jessup recycled rubber grip.

A little magic carpet but not too bad. Might end up putting some 151s or 6.1s on it...

[RichardBarkley]

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[funeral_tuxedo]

Uma "Thumb shape" 9" with 14 3/8 WB
AF1 55s
54mm 99a F4s
Swiss 6
Mix of regular Jessup and the weird Nike/ Jessup recycled rubber grip.

A little magic carpet but not too bad. Might end up putting some 151s or 6.1s on it...

@Frank and Fred That's a lovely looking setup. How steep are the kicks on that Colman deck?

[Frank and Fred]

@funeral_tuxedo Thanks. Pretty much on par with most DLX shapes and thankfully Mellower than the AA Hockey I am currently on.

[Sightunseen]

Expand Quote

[close]

Two killer setups! The Trake, MQ, and TIE stickers look so sick with those graphics ^

Appreciate it!

[smoothbrain]

Another one

Hockey K-Rod 8.5
Ace AF1 55's
Loophole square cut 54mm
Bones swiss
Jessup

[augustmoon]

i've been trying to consolidate all of my skate junk, so I frankensteined this together with stuff I had lying around.

CK egg shape I've had probably since he first went to jail.  9.something
Venture Hi 5.8s i had on a crusier I never rode
50 mm Chocolate wheels I got on clearance.  They feel real plasticky, almost like toy store wheels
random bearings

gonna beat it to death at the slappy curb

[Freelancevagrant]

Just set up this bulldozer dildozer at my in-laws.


Anti Hero Gerwer/Hewitt conjoined twins 9” x 32.5” x 14.75” wb

Ace 55’s classics
Bones Big Balls
Spitfire F4 52mm tablets
Mob
Allen 7/8” bolts

[fairydinkum]

deck - moonshine (freestyle deck, no concave) 7.25 x 27.5 x 11.8
trucks - tracker classic 106mm (oldschool baseplate)
wheels - Kryptonics Speedthane (vintage and not a re-issue) 60mm 97.5a
hardware - modus blacks bearings, enjoi 7/8 bolts (shalom themed colours), jessup grip

Looking to downsize to a 7" deck for crazier footwork.

[white guy in a durag]

love it. I wonder how many closeted freestylers are on this forum? Freestyle set ups always looks sick.

[GardenSkater77]

Big up to Slam City. Top shots of each deck is so obvious and yet nobody does it. If I were in the UK this would be my shop for the photos alone.

https://www.slamcity.com/collections/over-8-6

[fairydinkum]

love it. I wonder how many closeted freestylers are on this forum? Freestyle set ups always looks sick.

Funny you mention that, I was actually just at the park and a couple of people came out of the closet as freestylers. They wanted to round up and have a session to the music, pree good.

[logjammin]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[switchfrontshuv]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

ur pushing truck madness to new levels

[RichardBarkley]

Love a good Frankenstein

How is the combo ?

[Gray Imp Sausage Metal]

Expand Quote

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[close]

ur pushing truck madness to new levels

yeah, like stage 7s are hard enough to come by anyway and now you're DNA splicing them with other trucks???

[chillclinton87]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

YOOOOOOOO!!!!!!

[Freelancevagrant]

My buddy knew I was doing some ditch skating today and gifted me a board he had gripped and put on ice. I appreciate the grip job just wish that it was in black, but I can not complain at all. Loving the size and shape and always appreciate a good friend hooking me up with some cool shit. I also was just in California visiting my brother and I was able to get some shit from his house that I had been storing since 2014 which is how I came up on the wheels and the old Indys.





Vagrant 9.5” x 32.5” double drilled 14.625” - 15.375” WB
Stage 10 Indy 159’s top bushing cut with no washers
OJ Matt Hensley Sweet Juice 58mm 99a
Shortys 1” bolts
Heroin 1/8” Risers
Rib Bones Rails
Mob Grip

[logjammin]

Love a good Frankenstein

How is the combo ?

Works pretty good, I couldn't figure out how to jam the nut into the stage 7 baseplate without hammering it up in there and ruining it, so I went with my JB weld Ace plates. Shaved top bushing down next to nothing, Ace bottom bushing and riptide pivot cups.

[camel filters]

My buddy knew I was doing some ditch skating today and gifted me a board he had gripped and put on ice. I appreciate the grip job just wish that it was in black, but I can not complain at all. Loving the size and shape and always appreciate a good friend hooking me up with some cool shit. I also was just in California visiting my brother and I was able to get some shit from his house that I had been storing since 2014 which is how I came up on the wheels and the old Indys.





Vagrant 9.5” x 32.5” double drilled 14.625” - 15.375” WB
Stage 10 Indy 159’s top bushing cut with no washers
OJ Matt Hensley Sweet Juice 58mm 99a
Shortys 1” bolts
Heroin 1/8” Risers
Rib Bones Rails
Mob Grip

Loving the quiver you're amassing 

[Hyliannightmare]

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

Here for this

[jerrygurneyscream]

Expand Quote

[close]

Two killer setups! The Trake, MQ, and TIE stickers look so sick with those graphics ^

Damn that Trake sticker 

[moonordie]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

Love the detail on the nose stickers lol

[logjammin]

Expand Quote

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[close]

Love the detail on the nose stickers lol

Thanks man! I am indeed Ace dependent.