The Set-up Thread

[rocklobster]

Expand Quote

I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread
CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness

[close]

I cant believe u mirrored the stickers. Anyway what's your favorite podcast?

Has to be The Joe Rogan Experience

[manysnakes]

Ive always loved tapered/pointy decks, but my Hockey board was probably the best board I’ve ever had. I felt like it improved my skating because of that rectangular shape. My board wasn’t steep at all though, maybe the nose just a little bit

I'm not religiously devoted to the brand, but yeah, I've had two FA boards and they were basically perfect. I keep flirting with other shit but Polar and FA consistently have exactly what I want from a skateboard. I also firmly believe that FA is ordering "better" wood from BBS because their decks seem to razor tail more slowly and keep their pop longer than anything else.

[Woodshop]

My street skating setup:

Real Reneal Doves 8.5 x 32.125, 14.375 WB
Ace AF1 55’s
Spitfire Classics 99a 54mm (worn to about 52 now)

I’m not sure if I like the shape that much. I prefer a long and wide nose/tail, on this deck they’re slightly tapered/sharp and a bit shorter. I think I’ll also go back to a 14.25 WB next time, to compensate for the weight of the Ace’s. I think it’ll give me a slightly snappier pop.

The other DLX 8.5 is shorter with the 14.25 wb but still pretty much the same shape.

If you want longer rounder kicks, something like Alien Workshop / Habitat have that shape with 14.25 wb, but they are definitely longer kicks and wide to the ends.

Just a few options anyway.

[Ray C. Usery]

I cant believe u mirrored the stickers.

I can

Anyway what's your favorite podcast?

Huberman Lab, Old Friends Catch Up and any of the ones that me a rocklobster's mother listens to

[rocklobster]

Expand Quote

I cant believe u mirrored the stickers.

[close]

I can

Expand Quote

Anyway what's your favorite podcast?

[close]

Huberman Lab, Old Friends Catch Up and any of the ones that me a rocklobster's mother listens to

My mom loves The Joe Rogan Experience and The Ben Shapiro Show!

[Frank Sobotka]

Expand Quote

Anyway what's your favorite podcast?

[close]

Huberman Lab, Old Friends Catch Up and any of the ones that me a rocklobster's mother listens to

Love this guy, ever since he did that piece for Jenkem, can't get enough of his purely scientific, no bullshit approach. I've learned so much about my own physiology and nervous system.

[sammyz]

Off popsicles for the meantime…i need to skate low curbs and flat ground, just so o can keep skating in my 50’s…for some reason when im on a popsicle all i think about is how big can i go. Anyway…





PP Nicky guerrero 10 x 14.5 x 31.8
Indy 159 barbee hollows
Spitfire 54mm 97a
Mob grip
Super swiss

[somedudefromnj]

I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread



CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness

Was wondering since Roberts always calls it twin paddle, are the kicks slightly bigger than your usual tail? Almost like a mellow double nose situation?

[GBLange]

Expand Quote

I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread



CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness

[close]

I cant believe u mirrored the stickers. Anyway what's your favorite podcast?

i did the same to the 9.75 symmetrical egg.from the stickers to the griptape job.

[Huell Howser]

my local shop's decks are all dlx wood so I just keep getting em. this angle makes my trucks look so mangled hahah. waiting for the day until they just snap. going on 1 & 1/2 years or so


8.75 shop deck
indy 159's
OJ juice bar
spitfire 55 formula 4 conicals(forget)

[FrozenIndustries]

8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

[fs1/2cab]

8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

I never had Venture's but this setup looks perfect.

And I am mad jealous of all you who have access to BBS local shop decks. Ya all are so lucky. Great wood and supporting the local shop.

[FrozenIndustries]

Expand Quote

8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

[close]

I never had Venture's but this setup looks perfect.

And I am mad jealous of all you who have access to BBS local shop decks. Ya all are so lucky. Great wood and supporting the local shop.

Thank you, they're good trucks. The lows get hated on but they were all I skated pre-madness.

[hobochimp]

8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

This setup is beautiful. Looks like so much fun. Love the green stain too.

Weird question but what shoes are those? I like the rounded look of the toe box haha

[FrozenIndustries]

Expand Quote

8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

[close]

This setup is beautiful. Looks like so much fun. Love the green stain too.

Weird question but what shoes are those? I like the rounded look of the toe box haha

NB# 440 high! The best shoe.

[Ok]

8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

Wet

[scrub74]

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

[biaherl]

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

I hope they make that shape for a while. I haven't had a chance to skate it yet and it might be a year before I get a chance

[Frank and Fred]

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

Oh oh. Symmetrical board with asymmetrical grip... might create a hole in the space-time continuum. Hold tight.

[biaherl]

Expand Quote

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

[close]

Oh oh. Symmetrical board with asymmetrical grip... might create a hole in the space-time continuum. Hold tight.

Also would you call that a lurb or a cledge that you're skating? Asking for a friend

[RichardBarkley]

Expand Quote

Expand Quote

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

[close]

Oh oh. Symmetrical board with asymmetrical grip... might create a hole in the space-time continuum. Hold tight.

[close]

Also would you call that a lurb or a cledge that you're skating? Asking for a friend

It's perfect it's a curb but you can tell people it's a ledge.

[scrub74]

I can’t slappy it so it’s a ledge. I wish there was room for 2 more pushes to get to it.

Re: asymmetric grip job, my front truck is a hair looser than my rear so I like to know which way is which. Plus I’ve never ridden a twin so…..

[Quantum_Bearing_Science]

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

Nice!!  Thanks for the support!

DM me your address if you need/want some of our stickers.

[Urtripping]

Looking forward to trying this out tomorrow.

8.75 5boro "Shred Shape"
Jessup, baby
AF1 55's
56mm Conical Full F4
Shit Reds and hardware

[Quantum_Bearing_Science]

Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob

Nice!!  Thanks for the support!

DM me your address if you need/want some of our stickers.

[munchbox]

Looking forward to trying this out tomorrow.

8.75 5boro "Shred Shape"
Jessup, baby
AF1 55's
56mm Conical Full F4
Shit Reds and hardware

that wheelbase and aces? bless your soul

[Urtripping]

Expand Quote

Looking forward to trying this out tomorrow.

8.75 5boro "Shred Shape"
Jessup, baby
AF1 55's
56mm Conical Full F4
Shit Reds and hardware

[close]

that wheelbase and aces? bless your soul

I like em short 

[Freelancevagrant]

Enjoy Jackson Pilz Egg 9.125” with a 14.5” wb
Venture 6.1s
Spitfire 52mm 99a f4 tablets
Bones big balls
Rib bones
7/8” Allen hardware
Jessup grip
Cinna Forever!

[GBLange]

Enjoy Jackson Pilz Egg 9.125” with a 14.5” wb
Venture 6.1s
Spitfire 52mm 99a f4 tablets
Bones big balls
Rib bones
7/8” Allen hardware
Jessup grip
Cinna Forever!

nice setup..

[Sk.A.T.A.N]

Got dem Lurps, had to set-up all the other new stuff I had waiting.


Hockey Nick Stain 8.25x31.875 /14.12wb + Mob grip
Lurpiv 144’s stock
Spitfire F4s 99 52mm (also a first for me)
Bones Swiss + 2 or 3 Reds.
Bronze Allen 1“
Adidas Busenitz vintage

Cant wait to try it out tomorrow!