The Set-up Thread

[YungJugg]

limo 8.25
venture 5.6 v-cast
f4 56mm classic 99a
jessup
swiss
bronze allen

deck has a lil sparkle/textured thing going on

[Cesspool86]

Expand Quote

Is there such thing as an "easter complete"?

[close]

@kneebone

yep!



There 8.25 (IV stamp) (Hsu guest board)
Indys 149 hollow/forged (w/aftermarket indy med conical bushings and riptide pivots)
SF F4 52mm conical full 99a (skate like a girl)
Swiss

Looks good. I'm a sucker for a white board with minimal graphics

[Gland Dongzig]

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

thats a beauty Lou

[JM]

[DanRar009]

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

[Lou Strux]

Expand Quote

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

[close]

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

@DanRar009 I am embarrassed to admit I did not buy the deck.
I simply happened to be within proximity to a freshly arrived pallet of decks in a certain warehouse & might have been overly vociferous about my interest in the decks contained on said pallet within earshot of somebody with the ability to green light my early access.
I am not proud of my pseudo-subtle AND overtly blatant exploitation of friendships I have made in the past, nor am I ashamed of them.
They is as they is & I be as I be: continually grateful for the opp to taste test proddy while it’s still fresh from the vine, so to speak.

[Sungam]

Canada skate shop blank
Venture 5.2 v-light lows
Old dirty ass dragons

[moonordie]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

[close]

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

[close]

@DanRar009 I am embarrassed to admit I did not buy the deck.
I simply happened to be within proximity to a freshly arrived pallet of decks in a certain warehouse & might have been overly vociferous about my interest in the decks contained on said pallet within earshot of somebody with the ability to green light my early access.
I am not proud of my pseudo-subtle AND overtly blatant exploitation of friendships I have made in the past, nor am I ashamed of them.
They is as they is & I be as I be: continually grateful for the opp to taste test proddy while it’s still fresh from the vine, so to speak.

That post made my Slap day

[DanRar009]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

[close]

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

[close]

@DanRar009 I am embarrassed to admit I did not buy the deck.
I simply happened to be within proximity to a freshly arrived pallet of decks in a certain warehouse & might have been overly vociferous about my interest in the decks contained on said pallet within earshot of somebody with the ability to green light my early access.
I am not proud of my pseudo-subtle AND overtly blatant exploitation of friendships I have made in the past, nor am I ashamed of them.
They is as they is & I be as I be: continually grateful for the opp to taste test proddy while it’s still fresh from the vine, so to speak.

LOL hey all good my man, if you got the connects might as well make use of them for sure. Since that’s the case, any idea if this particular graphic will be available for purchase at any point ?

[Lou Strux]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

[close]

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

[close]

@DanRar009 I am embarrassed to admit I did not buy the deck.
I simply happened to be within proximity to a freshly arrived pallet of decks in a certain warehouse & might have been overly vociferous about my interest in the decks contained on said pallet within earshot of somebody with the ability to green light my early access.
I am not proud of my pseudo-subtle AND overtly blatant exploitation of friendships I have made in the past, nor am I ashamed of them.
They is as they is & I be as I be: continually grateful for the opp to taste test proddy while it’s still fresh from the vine, so to speak.

[close]

LOL hey all good my man, if you got the connects might as well make use of them for sure. Since that’s the case, any idea if this particular graphic will be available for purchase at any point ?

I’m not an authorized spokesperson, sales rep, or otherwise affiliated w/ Deluxe, beyond a periodic lunch habit & some cross pollination happening at my main gig, so take the following with a modicum of sodium… They will apparently start showing up at shops any minute now. Looks like there are 3 shapes cut in that mold, dressed up as as either sparkle eagles or pearlescent ovals(?)

[art hellman]

Expand Quote

Expand Quote

Is there such thing as an "easter complete"?

[close]

@kneebone

yep!



There 8.25 (IV stamp) (Hsu guest board)
Indys 149 hollow/forged (w/aftermarket indy med conical bushings and riptide pivots)
SF F4 52mm conical full 99a (skate like a girl)
Swiss

[close]

Looks good. I'm a sucker for a white board with minimal graphics

original graphic pre-paint, which I liked, but I like minimal more.

[LeDave]

DECK - DGK Spirit Blossom Crew 8.06
GRIP TAPE - Know Bad Daze Angry Eyes
HARDWARE - Independent Red Phillips
TRUCKS - Thunder Sonora 147s
WHEELS - Ricta Cloud 54mm 92A
BUSHINGS - Independent Hard
BEARINGS - Bronson G3

[Anxiety]

LeDave completely demolishing the game

[DinnerDog425]

Just threw together:
Real 8.25” Easy Rider
Thunder Night Hollow Lights 148
54mm Spitfire Radial 93s
Bones Red
Modus Hardware

[TwisT]

LeDave completely demolishing the game

Really got me wanting to setup my holographic dgk tuner deck

[DanRar009]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

[close]

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

[close]

@DanRar009 I am embarrassed to admit I did not buy the deck.
I simply happened to be within proximity to a freshly arrived pallet of decks in a certain warehouse & might have been overly vociferous about my interest in the decks contained on said pallet within earshot of somebody with the ability to green light my early access.
I am not proud of my pseudo-subtle AND overtly blatant exploitation of friendships I have made in the past, nor am I ashamed of them.
They is as they is & I be as I be: continually grateful for the opp to taste test proddy while it’s still fresh from the vine, so to speak.

[close]

LOL hey all good my man, if you got the connects might as well make use of them for sure. Since that’s the case, any idea if this particular graphic will be available for purchase at any point ?

[close]

I’m not an authorized spokesperson, sales rep, or otherwise affiliated w/ Deluxe, beyond a periodic lunch habit & some cross pollination happening at my main gig, so take the following with a modicum of sodium… They will apparently start showing up at shops any minute now. Looks like there are 3 shapes cut in that mold, dressed up as as either sparkle eagles or pearlescent ovals(?)

Niiiiiice I’ll definitely be in the lookout. Thank you I appreciate the info! That Ben degros vid he did discussing the new mold got me really wanting one and that sparkle eagle is just absolutely gorgeous to me

[Mbrimson88]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Expand Quote

AH “sparkle” Eagle pressed in the Easy Riderz Concave mold 8.5” w/ the 14.25” WB
Spitfire F4 Easy Sliders 93a duro, 54mm Radials
Made in USA (SF/CA) Indy Stage XI 149 Standards w/ grade 8 flat washers on top
Bones Swiss
Jessup LS3 grip
Roughneck 1” Phillips

[close]

hot hot hot

[close]

thats a beauty Lou

[close]

Wow that’s a great looking setup. Where’d you buy the deck, if you don’t mind me asking?

[close]

@DanRar009 I am embarrassed to admit I did not buy the deck.
I simply happened to be within proximity to a freshly arrived pallet of decks in a certain warehouse & might have been overly vociferous about my interest in the decks contained on said pallet within earshot of somebody with the ability to green light my early access.
I am not proud of my pseudo-subtle AND overtly blatant exploitation of friendships I have made in the past, nor am I ashamed of them.
They is as they is & I be as I be: continually grateful for the opp to taste test proddy while it’s still fresh from the vine, so to speak.

[close]

LOL hey all good my man, if you got the connects might as well make use of them for sure. Since that’s the case, any idea if this particular graphic will be available for purchase at any point ?

[close]

I’m not an authorized spokesperson, sales rep, or otherwise affiliated w/ Deluxe, beyond a periodic lunch habit & some cross pollination happening at my main gig, so take the following with a modicum of sodium… They will apparently start showing up at shops any minute now. Looks like there are 3 shapes cut in that mold, dressed up as as either sparkle eagles or pearlescent ovals(?)

[close]

Niiiiiice I’ll definitely be in the lookout. Thank you I appreciate the info! That Ben degros vid he did discussing the new mold got me really wanting one and that sparkle eagle is just absolutely gorgeous to me

Check the DLX Shapes thread, or the new Easyrider threads, or even DLX instagram post for the pics and info of the boards.

Blue sparkle in 8.5 and green sparkle in 8.38 eagles, as per the post here:


https://www.slapmagazine.com/index.php?topic=129857.msg4183462#msg4183462

[Anxiety]

Expand Quote

LeDave completely demolishing the game

[close]

Really got me wanting to setup my holographic dgk tuner deck

Depends on if you’ve got any Indy hard bushings for your thunders

[luffy]

Tightbooth 8.5 14.25wb
Lurpiv Gen 1 149
Spitfire Radial Full 54mm
Bones swiss
Mismatched 7/8 Allen hardware
Pepper grip

Would love to know everything about the deck. Been wanting to buy and skate one for a while but money is tight and there isn’t a lot of any information about tightbooth boards. How’s the shape? How’s the wood? Fill me in

[TwisT]

Expand Quote

Expand Quote

LeDave completely demolishing the game

[close]

Really got me wanting to setup my holographic dgk tuner deck

[close]

Depends on if you’ve got any Indy hard bushings for your thunders

lol, I do, have a set… and I have some ricta clouds laying around. Aw fuck

[thespacewolf]

Just threw together:
Real 8.25” Easy Rider
Thunder Night Hollow Lights 148
54mm Spitfire Radial 93s
Bones Red
Modus Hardware

Gonna need an update after you skate this deck!

[DinnerDog425]

Expand Quote

Just threw together:
Real 8.25” Easy Rider
Thunder Night Hollow Lights 148
54mm Spitfire Radial 93s
Bones Red
Modus Hardware

[close]

Gonna need an update after you skate this deck!

I like it. It’s very similar to the crail G069 shape which I really enjoy. Only negative for me is it’s not a twin tail the nose is super long and it’s apparent.

[roba]

pop 8.375 x 32ish 14.25wb
venture 5.8 supercush 90a bushings
spitfire f4 classics 56mm 97a
skf skate bearings
pig 7/8 allen
cons alltimers fastbreak
griptape shall not be named

i love the concave on those pop boards, they’re pretty flat with medium kicks, dsm wood i think

[Shellac]

limo 8.25
venture 5.6 v-cast
f4 56mm classic 99a
jessup
swiss
bronze allen

deck has a lil sparkle/textured thing going on

I’m certain it’s silk screened.

[Thebird]

Expand Quote

Expand Quote

Just threw together:
Real 8.25” Easy Rider
Thunder Night Hollow Lights 148
54mm Spitfire Radial 93s
Bones Red
Modus Hardware

[close]

Gonna need an update after you skate this deck!

[close]

I like it. It’s very similar to the crail G069 shape which I really enjoy. Only negative for me is it’s not a twin tail the nose is super long and it’s apparent.

I was kind of thinking these sound similar to crail, mellow concave but average kicks.  I guess they just lack the stiffness of the crail decks.

[Stanley Spadowski]

8.25 Generator blank
5.25 Venture lo’s
45mm OJ lil bling blings
Swiss/Jessup/7/8’s Allen Shorty’s 

[slapattack]

Expand Quote

Tightbooth 8.5 14.25wb
Lurpiv Gen 1 149
Spitfire Radial Full 54mm
Bones swiss
Mismatched 7/8 Allen hardware
Pepper grip

[close]

Would love to know everything about the deck. Been wanting to buy and skate one for a while but money is tight and there isn’t a lot of any information about tightbooth boards. How’s the shape? How’s the wood? Fill me in

Gotchu. It's actually the first DSM board I have ever skated and honestly I feel like its held up equivalent to BBS (at about 2 months in now). I really like the shape as its a shorter wheelbase (14.25) with a standard length (32"). The nose and tail I would say are a fuller shape. Overall skates great and would definitely buy another but they seem to be quite hard to find in the US. 

[Meathook]

8.5 mini logo spray painted white
149 Thunder w Indy black 94a conical
56mm conical full f4 (about to try 93a, but if I don’t jive these are my go to)
Brunswick Grip
Big Balls
Shortys 7/8”
Half Cab Pros

[Xen]

new new




8.25" Easy Rider
5.6 V-Hollows
52mm Soft Sliders
Pepper Galaxy
Swiss Six
Thunder (?) bolts/low profile nuts

[lulz]

8.25 Generator blank
5.25 Venture lo’s
45mm OJ lil bling blings
Swiss/Jessup/7/8’s Allen Shorty’s

Nice Zappa sticker!
lol
Where did you find that?)