The Set-up Thread

[djoekr]

Original Curb Killer signed by Ira and the Fosman that used to be a wallhanger. Haven't skated a round tail for quite some time, but it's a nice change of pace. It feels very nimble compared to the Heroin Mutant I was skating before this, although the tail is a bit on the small side. The new symmetrical ones seem to have specs more to my liking, so I ordered one of those if I ever feel the need for a round tail again.

[mrselfdestruct]

zero 8.5 three skull blood drip
fa x spitfire 56 mm conical full
thunder titanium lights 149's
doh doh's 92a bushings
7/8 indy phillips hardware
bronson raws.

perfect street set-up wheels are deff now like 54-53.

[mrselfdestruct]

also anyone skated a shorty's deck? i'd love to get one but want to know if it'll shit out on me.

[TastyBurrito]

also anyone skated a shorty's deck? i'd love to get one but want to know if it'll shit out on me.

They used to be done by PrimeLA but I think they're being pressed by Clutch nowadays. Never had a problem with Clutch before. So you should be good.

[Meathook]

Close to Christmas complete:

8.5 Mini Logo
149 Thunder all stock
54 Radial F4 93a
Big Balls
Allen Shortys Lights
Black Half Cab Pros again

I tried to go back to 99’s and immediately went back the 93’s.  For everything I skate they are perfect.

[Gnar_Gnar]

Expand Quote

limosine 8.6
indy 149
spitefire f4 classic 53mm
reds

[close]

That, is a nice setup

This setup makes me want to skate.  Black and grey with the lime green mmmm

[yourbreakfsat]

Been trying to do more flatground/ledge lately. Egg shapes aren't really my thing but I keep going back to them for some reason.




Black Label Jake Reuter "LOST HIGHWAY" 9.0" x 32.2" Custom Egg 14.38" Wheelbase
Independent 159 Standards, aftermarket Indy 90a bushings
Spitfire F4 56mm 93a Radials
Bones Swiss 6
MOB
1" Indy hardware

[mrselfdestruct]

Expand Quote

also anyone skated a shorty's deck? i'd love to get one but want to know if it'll shit out on me.

[close]

They used to be done by PrimeLA but I think they're being pressed by Clutch nowadays. Never had a problem with Clutch before. So you should be good.

Thank ya!

[Dmng]

Been trying to do more flatground/ledge lately. Egg shapes aren't really my thing but I keep going back to them for some reason.




Black Label Jake Reuter "LOST HIGHWAY" 9.0" x 32.2" Custom Egg 14.38" Wheelbase
Independent 159 Standards, aftermarket Indy 90a bushings
Spitfire F4 56mm 93a Radials
Bones Swiss 6
MOB
1" Indy hardware

Is it hard to do such a clean line, keeping the 2 bits parallel ? Do you do something special to be able to do it ?

[yourbreakfsat]

Expand Quote

Been trying to do more flatground/ledge lately. Egg shapes aren't really my thing but I keep going back to them for some reason.




Black Label Jake Reuter "LOST HIGHWAY" 9.0" x 32.2" Custom Egg 14.38" Wheelbase
Independent 159 Standards, aftermarket Indy 90a bushings
Spitfire F4 56mm 93a Radials
Bones Swiss 6
MOB
1" Indy hardware

[close]

Is it hard to do such a clean line, keeping the 2 bits parallel ? Do you do something special to be able to do it ?

For me it isn't. I place the griptape off center so there's some of the top ply showing. I cut the griptape, then use the left over to cover the rest of the top ply. I line up the edges together and eyeball the distance and how parallel they are. Same thing goes if I go for a horizontal line instead.

[CarcassToss]

If you're wanting to skate ledges and stuff more why not ride a popsicle? I would imagine having more kick surface is nicer for slides. I've seen some of your (cool) shaped board setups so you seem like you're able to adapt pretty well.

[yourbreakfsat]

If you're wanting to skate ledges and stuff more why not ride a popsicle? I would imagine having more kick surface is nicer for slides. I've seen some of your (cool) shaped board setups so you seem like you're able to adapt pretty well.

Boils down to me being super indecisive and always wanting to go back to shaped boards whenever I skate popsicles

[CarcassToss]

You gotta skate what makes you happy in the end.

[smellsdead]

pepper
bbs/generator 8.5 painted and engraved
bronze allen 1"
dookies 1/8"
ace 55 classic
swiss
99a f4s around 53ish mm

some detail








im jazzed on it

[Lou Strux]

pepper
bbs/generator 8.5 painted and engraved
bronze allen 1"
dookies 1/8"
ace 55 classic
swiss
99a f4s around 53ish mm

some detail








im jazzed on it

Smells, you’re taking this laser etching thing to new heights.
Looks stellar!

[TwisT]

But in all seriousness, this is cool, and I want a laser 

[roba]

yup those graphics you do are incredible. i fuck with the vision.

[Dmng]

smellsdead Insane board again !!!

[mrselfdestruct]

is going from an 8.5 to 8.38 gonna fuck me up or naw?

[moonordie]

is going from an 8.5 to 8.38 gonna fuck me up or naw?

No

[Francis Xavier]

pepper
bbs/generator 8.5 painted and engraved
bronze allen 1"
dookies 1/8"
ace 55 classic
swiss
99a f4s around 53ish mm

some detail








im jazzed on it

Big yes

[camel filters]

You 7.75 heads should post some footage. Seeing boards that small in HD is rare. Also what shoe size are you guys on those things?

[dr.prestige]

You 7.75 heads should post some footage. Seeing boards that small in HD is rare. Also what shoe size are you guys on those things?

Although I’ve been mainly riding an 8.5 recently I rode 7.5s for the last couple years and I wear a 13, i fit 14 in new balances. I’ll put together a greatest hits from my ig page in a bit

[Fooj]

Tired 8.75
Snot rails
Thunder 149 w/ Indy XSoft Bushings
Spitfire 93s Radial 54mm
Bones Swiss 6
Diamond 7/8 Allen
Grizzly blank
Vans Skate slips

[lulz]

“Micro” setup:
7.3 element, made to endure
Thunder 145’s
Swiss 6
Mini logo awol
Jessup

Yes, I know, but I like it.

Messed up a corner of the Jessup, so had to go with it and screw it all up.
7.6 on 7.3 doesn’t hot rod too much, my other options were ace 00’s, or tiny tensors.
Going with cruiser wheels to see if I can get used to it, lol.

[burner]

Tired 8.75
Snot rails
Thunder 149 w/ Indy XSoft Bushings
Spitfire 93s Radial 54mm
Bones Swiss 6
Diamond 7/8 Allen
Grizzly blank
Vans Skate slips

Smooth.

[Made In China]

@smellsdead with one of the absolute sickest looking diy graphics I've ever seen

[Phillyflared]

Chocolate James Capps 8.25 G052
Thunder Lights
Spitfire 51mm but probably closer to 49 by now
Swiss
Pepper

Back to back on the G052 after a couple G027
Anyone try the new 8.25 Crail just put out? G089 i think

[Painted Baby]

Chocolate James Capps 8.25 G052
Thunder Lights
Spitfire 51mm but probably closer to 49 by now
Swiss
Pepper

Back to back on the G052 after a couple G027
Anyone try the new 8.25 Crail just put out? G089 i think

GO69 cuz it's a twin. First I have heard about it.

[Esmith5488]

Expand Quote

is going from an 8.5 to 8.38 gonna fuck me up or naw?

[close]

No

I bounce between these two often and it’s not an issue