The Set-up Thread

[RichardBarkley]

Expand Quote

Probably not going to skate this yet but I wanted to have something around that I can "snap in to" if I desperately need some FUN in my life.

Enjoi Deedz 8.37" x 31.6" FUN shape
Ace 03 low
Snot 51mm conical (glow in the dark)
Bop Shop grip
Bop Shop "the Bop don't stop" bearings
Eatshit2001 hardware

[close]

OOOO YEAHHHH! That enjoi series is great.

Very nice

How are the snots to run

[Sativa Lung]

Very nice

How are the snots to run

Good! They're CU so same stuff as satori/dialtone/speedlab/jivaro/orbs/prize fighter cutlery etc. They're 101a but CU wheels sometimes feel a bit soft so my first impression is that they kind of ride like a spitfire classic 99a but aren't as sticky and slide better. That might change as they break in, I imagine they'll probably get a little slicker and easier to break free once the grooves are gone. 51mm conical seems like a really good fit for these trucks too.

[TheCrimsonShroud]

Probably not going to skate this yet but I wanted to have something around that I can "snap in to" if I desperately need some FUN in my life.

Enjoi Deedz 8.37" x 31.6" FUN shape
Ace 03 low
Snot 51mm conical (glow in the dark)
Bop Shop grip
Bop Shop "the Bop don't stop" bearings
Eatshit2001 hardware

Goddamn I love Macho Man. How's the view from the top of the mountain?

[camel filters]

Expand Quote

Probably not going to skate this yet but I wanted to have something around that I can "snap in to" if I desperately need some FUN in my life.

Enjoi Deedz 8.37" x 31.6" FUN shape
Ace 03 low
Snot 51mm conical (glow in the dark)
Bop Shop grip
Bop Shop "the Bop don't stop" bearings
Eatshit2001 hardware

[close]

Goddamn I love Macho Man. How's the view from the top of the mountain?

whats the width at the trucks on that enjoi?

[moonordie]

^ my guess would be 8", even 7.9

[big_kev_215]

I was drunk, started rewatching AO’s bizarre Jenkem interview on YouTube, and next thing I knew I was ordering this deck…

917 8.38” (other dimensions unspecified on said company’s website)
AF1 55’s
Spitfire conical full 97a 54s
Bearings
Hardware
Mob

[newspaperparty]

I was drunk, started rewatching AO’s bizarre Jenkem interview on YouTube, and next thing I knew I was ordering this deck…

917 8.38” (other dimensions unspecified on said company’s website)
AF1 55’s
Spitfire conical full 97a 54s
Bearings
Hardware
Mob

Ohhh yeah

[CaderSk8r]

I was drunk, started rewatching AO’s bizarre Jenkem interview on YouTube, and next thing I knew I was ordering this deck…

917 8.38” (other dimensions unspecified on said company’s website)
AF1 55’s
Spitfire conical full 97a 54s
Bearings
Hardware
Mob

What’s the wheelbase?

[Ok]

Expand Quote

I was drunk, started rewatching AO’s bizarre Jenkem interview on YouTube, and next thing I knew I was ordering this deck…

917 8.38” (other dimensions unspecified on said company’s website)
AF1 55’s
Spitfire conical full 97a 54s
Bearings
Hardware
Mob

[close]

What’s the wheelbase?

I’ve always found 917 to be cool, but I do like to know the dimensions of a board.

[big_kev_215]

Expand Quote

I was drunk, started rewatching AO’s bizarre Jenkem interview on YouTube, and next thing I knew I was ordering this deck…

917 8.38” (other dimensions unspecified on said company’s website)
AF1 55’s
Spitfire conical full 97a 54s
Bearings
Hardware
Mob

[close]

What’s the wheelbase?

Wheelbase looks slightly less than 14.25
Width looks correct
Length’s around 31.875

[Sativa Lung]

Expand Quote

Expand Quote

Probably not going to skate this yet but I wanted to have something around that I can "snap in to" if I desperately need some FUN in my life.

Enjoi Deedz 8.37" x 31.6" FUN shape
Ace 03 low
Snot 51mm conical (glow in the dark)
Bop Shop grip
Bop Shop "the Bop don't stop" bearings
Eatshit2001 hardware

[close]

Goddamn I love Macho Man. How's the view from the top of the mountain?

[close]

whats the width at the trucks on that enjoi?

8.13 front, 8 or maybe just a cunthair over at the back

[CaderSk8r]

Expand Quote

Expand Quote

I was drunk, started rewatching AO’s bizarre Jenkem interview on YouTube, and next thing I knew I was ordering this deck…

917 8.38” (other dimensions unspecified on said company’s website)
AF1 55’s
Spitfire conical full 97a 54s
Bearings
Hardware
Mob

[close]

What’s the wheelbase?

[close]

Wheelbase looks slightly less than 14.25
Width looks correct
Length’s around 31.875

Sick! That what I was hoping. Not really into the 14.75 wheelbase decks

[Lloyd Braun]

Forgot to get a pic before today’s session. Last of my Native decks, looking forward to the quasi/fa boards I have on deck.

Native 8.5 (Clutch O9 shape)
Venture 5.8 standards with DLK
Old 52mm F4 classics 99a
Swiss
7/8” allen
Plain jessup

[rocklobster]

Forgot to get a pic before today’s session. Last of my Native decks, looking forward to the quasi/fa boards I have on deck.

Native 8.5 (Clutch O9 shape)
Venture 5.8 standards with DLK
Old 52mm F4 classics 99a
Swiss
7/8” allen
Plain jessup

Was swapping to a DLK worth the effort? Trying to hammer the kingpin out seems like more effort than I'm willing to commit.

[tom]

This ones an anomaly for me. I don’t like the squared off PS Stix shapes that are popular nowadays. I haven’t really liked PS boards in general since the original Alien ended. I also don’t like boards with more wood stain than graphic. A friend gave me a few WKND boards to skate and I’m appreciative for that

[knee surgery]

not a Nik Stain 8.5 hockey board
55 Af1
f4 classsics 56mm

[antarctica]

This ones an anomaly for me. I don’t like the squared off PS Stix shapes that are popular nowadays. I haven’t really liked PS boards in general since the original Alien ended. I also don’t like boards with more wood stain than graphic. A friend gave me a few WKND boards to skate and I’m appreciative for that

Give us the specs man, looks sweet

[RichardBarkley]

This ones an anomaly for me. I don’t like the squared off PS Stix shapes that are popular nowadays. I haven’t really liked PS boards in general since the original Alien ended. I also don’t like boards with more wood stain than graphic. A friend gave me a few WKND boards to skate and I’m appreciative for that

Nice

Got some sexy wear on the aces

Any chance of a straight on pic off the grooves

[Lloyd Braun]

Expand Quote

Forgot to get a pic before today’s session. Last of my Native decks, looking forward to the quasi/fa boards I have on deck.

Native 8.5 (Clutch O9 shape)
Venture 5.8 standards with DLK
Old 52mm F4 classics 99a
Swiss
7/8” allen
Plain jessup

[close]

Was swapping to a DLK worth the effort? Trying to hammer the kingpin out seems like more effort than I'm willing to commit.

I don’t think it is TBH probably won’t do it again. You don’t hang up on smiths, but then the balance point is gone too so my nose on bs smiths fall to the ground a lot of times. Hard to explain but it’s trading one problem for another, and plus it’s a whole ordeal to install them.

[Phillyflared]

Expand Quote

7.9 dwindle flat shape, like real flat
ace 33
bones swiss
spitfire 52mm
compulsive doodle grip

took it my local secret covid curb a couple times this past weekend (pics from before) to skate some flatground. took a sec to get used to how flat it is.

anyone else ride ace 33's? if so what size board are you riding?

[close]

Cool Pezo, pleasing board to look at.

Thanks! It was kinda fun to skate but ultimately too flat.
Got some Pezo stickers with a DFW zine and the board needed some life added to it

[Phillyflared]

The art on the grip works, very cool.

Thanks! Appreciate that.
Hadn't drawn on my board in a long time. Back to full grip on current set up

[Xen]

Primitive 8.25"X31.875x14"WB - painted, because Primitive/DBZ, but I love this shape and it’s the only 14” WB I can ride.
Leftover mix of Mob and Jessup Ultra
Chocolate hardware (might as well be shorty's bolts but they stay black)
Thunder 148 Hollow lights, stock bushings (shaved down top) sleeved machined washers
51/50mm-ish Bones V3s + Wheelbite
Bronson Ceramics
Santa Cruz Slimline rails
Adidas Puig Premier Crystal White/Sunglow (launch colorway)

[TwisT]

Prime 8.25
Tensor Mag
Darkroom 52mm 99a
Quantum Atoms
DGK RBK Club

[Xen]

Prime 8.25
Tensor Mag
Darkroom 52mm 99a
Quantum Atoms
DGK RBK Club

That back truck is getting worked!

[TwisT]

Expand Quote

Prime 8.25
Tensor Mag
Darkroom 52mm 99a
Quantum Atoms
DGK RBK Club

[close]

That back truck is getting worked!

That was the front truck. Switched em around for this setup

[gsosa]

Baker 8.25 Jacopo
Spitfire Tablets originally 54mm now down to like 45
Thunder 148s with the Thunder 95a medium bushings
Shortys Hardware 7/8 phillips
Spitfire Cheapshots
DC Legacy 98 Slims
It's crazy but I used to be all about the all about the AWS 8.25s with the square nose and deep concave. Got the Baker board which is a complete opposite and I fucking love it. I find it that the mellow concave makes it more friendly to learn and land flatground shit. I have learned so much shit in this board (not only flat) I'm definitely a mellow concave pointy board dude now.

[Velcro Wallet]

Set up a curb cruise board

Re - Issued Rudy Blind board. Have no idea what measurements.

Thunder 149ers with Bones bushings, Bones reds, classic spitfire 50mm.

Need wider trucks?

[Art Greco]

Set up a curb cruise board

Re - Issued Rudy Blind board. Have no idea what measurements.

Thunder 149ers with Bones bushings, Bones reds, classic spitfire 50mm.

Need wider trucks?

Nice!  Yeah, either 159's or some wider wheels would probably look a little more balanced.  Works, though!

[fakiefs180]

Baker 8.25 Jacopo
Spitfire Tablets originally 54mm now down to like 45
Thunder 148s with the Thunder 95a medium bushings
Shortys Hardware 7/8 phillips
Spitfire Cheapshots
DC Legacy 98 Slims
It's crazy but I used to be all about the all about the AWS 8.25s with the square nose and deep concave. Got the Baker board which is a complete opposite and I fucking love it. I find it that the mellow concave makes it more friendly to learn and land flatground shit. I have learned so much shit in this board (not only flat) I'm definitely a mellow concave pointy board dude now.

I love how these wheels look!

[Boog]

Baker 8.25 Jacopo
Spitfire Tablets originally 54mm now down to like 45
Thunder 148s with the Thunder 95a medium bushings
Shortys Hardware 7/8 phillips
Spitfire Cheapshots
DC Legacy 98 Slims
It's crazy but I used to be all about the all about the AWS 8.25s with the square nose and deep concave. Got the Baker board which is a complete opposite and I fucking love it. I find it that the mellow concave makes it more friendly to learn and land flatground shit. I have learned so much shit in this board (not only flat) I'm definitely a mellow concave pointy board dude now.

Same here bro. It's definitely a game changer.