The Set-up Thread

[GardenSkater77]

Big up to Slam City. Top shots of each deck is so obvious and yet nobody does it. If I were in the UK this would be my shop for the photos alone.

https://www.slamcity.com/collections/over-8-6

[fairydinkum]

love it. I wonder how many closeted freestylers are on this forum? Freestyle set ups always looks sick.

Funny you mention that, I was actually just at the park and a couple of people came out of the closet as freestylers. They wanted to round up and have a session to the music, pree good.

[logjammin]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[switchfrontshuv]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

ur pushing truck madness to new levels

[RichardBarkley]

Love a good Frankenstein

How is the combo ?

[Gray Imp Sausage Metal]

Expand Quote

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[close]

ur pushing truck madness to new levels

yeah, like stage 7s are hard enough to come by anyway and now you're DNA splicing them with other trucks???

[chillclinton87]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

YOOOOOOOO!!!!!!

[Freelancevagrant]

My buddy knew I was doing some ditch skating today and gifted me a board he had gripped and put on ice. I appreciate the grip job just wish that it was in black, but I can not complain at all. Loving the size and shape and always appreciate a good friend hooking me up with some cool shit. I also was just in California visiting my brother and I was able to get some shit from his house that I had been storing since 2014 which is how I came up on the wheels and the old Indys.





Vagrant 9.5” x 32.5” double drilled 14.625” - 15.375” WB
Stage 10 Indy 159’s top bushing cut with no washers
OJ Matt Hensley Sweet Juice 58mm 99a
Shortys 1” bolts
Heroin 1/8” Risers
Rib Bones Rails
Mob Grip

[logjammin]

Love a good Frankenstein

How is the combo ?

Works pretty good, I couldn't figure out how to jam the nut into the stage 7 baseplate without hammering it up in there and ruining it, so I went with my JB weld Ace plates. Shaved top bushing down next to nothing, Ace bottom bushing and riptide pivot cups.

[camel filters]

My buddy knew I was doing some ditch skating today and gifted me a board he had gripped and put on ice. I appreciate the grip job just wish that it was in black, but I can not complain at all. Loving the size and shape and always appreciate a good friend hooking me up with some cool shit. I also was just in California visiting my brother and I was able to get some shit from his house that I had been storing since 2014 which is how I came up on the wheels and the old Indys.





Vagrant 9.5” x 32.5” double drilled 14.625” - 15.375” WB
Stage 10 Indy 159’s top bushing cut with no washers
OJ Matt Hensley Sweet Juice 58mm 99a
Shortys 1” bolts
Heroin 1/8” Risers
Rib Bones Rails
Mob Grip

Loving the quiver you're amassing 

[Hyliannightmare]

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

Here for this

[jerrygurneyscream]

Expand Quote

[close]

Two killer setups! The Trake, MQ, and TIE stickers look so sick with those graphics ^

Damn that Trake sticker 

[moonordie]

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

Love the detail on the nose stickers lol

[logjammin]

Expand Quote

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[close]

Love the detail on the nose stickers lol

Thanks man! I am indeed Ace dependent.

[stets]

Expand Quote

Expand Quote

8.38" eagle
Ace baseplates, stage 7 hangers, Kreper pins
1/8" Ace risers
NFG squares 54mm
Swiss bearings

[close]

Interesting... why the Aceplates with Indy stage 7 hangers? Wouldn't the Stage 7 plates worked better for inverted kingpins since you could just jam the nut in those with no need for JB Weld or anything that you would need on Ace baseplates?
Love the detail on the nose stickers lol

[close]

Thanks man! I am indeed Ace dependent.

[Internet Skater]

Love to see it 

[FatGuy92]

Expand Quote

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[close]

Here for this

Where can you get a 7.6 blank nowadays? Dims?

[rocklobster]

Expand Quote

Expand Quote

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[close]

Here for this

[close]

Where can you get a 7.6 blank nowadays? Dims?

Skatewarehouse? Tactics does smaller sized team boards.

[LebowskisRug]

Polar 8.25, 14.25, 31.9
Indy Titanium Forged Hollow 144, aftermarket bushies
F4 53 Claseek
Bones with 6 balls
Shorty’s Silverado’s
Yessup

Might have found the holy grail shape until the next holy grail shape I find in 3-4 weeks.

[Painted Baby]

^Very much feeling that sticker job

[devourthehours]

Quasi Justin Henry 8.25 x 31.5
Ace 44
Ace 1/8" Risers
Speedlab Slappy Hour 56mm
Bones Big Balls
Elessic Hardware

Sizing down from an 8.38. Excited to be back on a Quasi.

[FatGuy92]

Expand Quote

Expand Quote

Expand Quote

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[close]

Here for this

[close]

Where can you get a 7.6 blank nowadays? Dims?

[close]

Skatewarehouse? Tactics does smaller sized team boards.

I sent an email to Tactics asking about their 7.5 and 7.625 dimensions and they're way too small. I've been curious about skate warehouse though. They have a 7.62x31.4 that looks interesting but I can't find any dimensions or woodshop info on them

[augustmoon]

SoCal has prime blanks in the sub-8 range, and I think Chapman might have some too

[RichardBarkley]

Expand Quote

Expand Quote

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[close]

Here for this

[close]

Where can you get a 7.6 blank nowadays? Dims?

A friend cut and shaped a blank for me. I love it

14wb. Long kicks and nose. It's magic.

[FatGuy92]

Expand Quote

Expand Quote

Expand Quote

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[close]

Here for this

[close]

Where can you get a 7.6 blank nowadays? Dims?

[close]

A friend cut and shaped a blank for me. I love it

14wb. Long kicks and nose. It's magic.

That's sick! I'm on a 7.875 right now, but am considering sizing down a little more. Only hesitating since some grinds are a little hard to lock in for me on a sub 8inch truck

[Boog]

8.25 krooked Louie Lopez guest board
149 hollow with blue conical bushings
52mm f4 99a
Reds
Mob

[LebowskisRug]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Blank 7.6
Venture Hollow Low 5.0
F4 99d ... Prob under 50m at this stage

[close]

Here for this

[close]

Where can you get a 7.6 blank nowadays? Dims?

[close]

A friend cut and shaped a blank for me. I love it

14wb. Long kicks and nose. It's magic.

[close]

That's sick! I'm on a 7.875 right now, but am considering sizing down a little more. Only hesitating since some grinds are a little hard to lock in for me on a sub 8inch truck

Man I am the opposite, the narrower the truck the easier the lock in. I was even thinking of randomly setting up a 7.8 or 8 with Venture Lows for nostalgias sake because I loved the pinch and pop.

[goingapelikenigo]

primitive 8.25 14wb
indy 144
spits f4 54mm 99d
enjoi hardware
china reds
jessup
accel slims

[goingapelikenigo]

8.25 krooked Louie Lopez guest board
149 hollow with blue conical bushings
52mm f4 99a
Reds
Mob

sick combo w the orange in the graphic w the orange f4s

[animalflesh]

Got two setups total now



Heroin (9” / 14.25)
159 hollow
1/4 risers
1 1/4 hardware
Big balls
Spit classic 60mm
Pig rails

Kendall shape (10” / 14.5)
159 standard
1/4 risers
1 1/4 hardware
Big balls
OJ Hosoi Rockets 61mm
Vision rails (suck)