The Set-up Thread

[Wizard0f0dds]

pic hosting websites

I know black wheels aren’t very popular here but I love them.

Limosine max palmer 8.6
Venture hollow 6.1
Spitfire Breana Geering 56mm
Bones reds
Indy slayer bolts

Beautiful. Makes me wanna set up my new Limosine  8.25 on my 5.8s. I've been switching between Indy and Thunder since the begining of the season, might as weel give my Ventures a shot too I guess!

[DarkPools]

Sooo that TKF looked great and felt great, except the tail was surprisingly mellow and "flat" feeling -_- Thats relegated to a spare or a homie discount deck to sell.

Ended up swapping it out with a Boserio Polar (8.5") and it is wayyyy better! Will post pics once I figure out my imgur login

[goingapelikenigo]

Expand Quote

8.25 alltimers
venture 5.6 hollow
old jessup
shop hw
wack bearings
f4s

[close]

This looks very nice. You might have measured the specs for the Alltimers deck? I rather trust a pal here with the specs. I am interested in tail / nose length, wheelbase and overall length. Only if you feel like measuring of course ^^

nah not really into measuring, srry man.  :'(

[fakiefs180]

Expand Quote

Expand Quote

8.25 alltimers
venture 5.6 hollow
old jessup
shop hw
wack bearings
f4s

[close]

This looks very nice. You might have measured the specs for the Alltimers deck? I rather trust a pal here with the specs. I am interested in tail / nose length, wheelbase and overall length. Only if you feel like measuring of course ^^

[close]

nah not really into measuring, srry man.  :'(

Not a worry mate. If it works for you that way, don't fall into the madness. Believe me ^^

[Mbrimson88]

Expand Quote

Expand Quote

Expand Quote

8.25 alltimers
venture 5.6 hollow
old jessup
shop hw
wack bearings
f4s

[close]

This looks very nice. You might have measured the specs for the Alltimers deck? I rather trust a pal here with the specs. I am interested in tail / nose length, wheelbase and overall length. Only if you feel like measuring of course ^^

[close]

nah not really into measuring, srry man.  :'(

[close]

Not a worry mate. If it works for you that way, don't fall into the madness. Believe me ^^

The one I had for a minute and passed on I thought was 8.25 x almost 32 (maybe 31.85) with 14.25 wb but that was a while ago, when I was not sure about going up from the black eagle 8.12 x 32 with 14.25 wb but overall the proportions felt good and it was a solid ride.  I ended up going up to 8.4 x 32 with 14.25 wb anyway and stayed around that width.

[logjammin]

8.5 14”WB
Ace AF1 44’s
1/16” Ace shock pads
54mm 99a classics
Bones Super Swiss 6 Balls

[BartHarleyJarvis]

8.5 14”WB
Ace AF1 44’s
1/16” Ace shock pads
54mm 99a classics
Bones Super Swiss 6 Balls

That short eagle is the exact board I want to set up next. You’ll have to update after a couple sessions on how it feels

[logjammin]

Skated it today, feels solid. I was on a Hockey before with a 14.1 wheelbase and this feels pretty much the same. I liked the overall shape and feel of the Hockey a little better, as this one is stamped with a 1 numeral so it’s not as mellow as I prefer.

[BartHarleyJarvis]

Skated it today, feels solid. I was on a Hockey before with a 14.1 wheelbase and this feels pretty much the same. I liked the overall shape and feel of the Hockey a little better, as this one is stamped with a 1 numeral so it’s not as mellow as I prefer.

Is the nose pretty square like a hockey or Real Full SE?

[Violator]

Double Post 

https://ibb.co/zrxzDjX
Heroin Symmetrical Egg (graphic towards nose scratched off)
Shake junt rail
Indy mid baseplate with Ace 55 classic hanger and Ace bushings
riser pads
Boardycakes 49mm wheels
Bones Reds
Penny hardware

This thing is super fun <3

[GBLange]

Double Post 

https://ibb.co/zrxzDjX
Heroin Symmetrical Egg (graphic towards nose scratched off)
Shake junt rail
Indy mid baseplate with Ace 55 classic hanger and Ace bushings
riser pads
Boardycakes 49mm wheels
Bones Reds
Penny hardware

This thing is super fun <3

sweeet

[Boog]

8.25 wknd
149 forged hollow
52mm conical
Mob

[Murge]

Expand Quote

8.5 14”WB
Ace AF1 44’s
1/16” Ace shock pads
54mm 99a classics
Bones Super Swiss 6 Balls

[close]

That short eagle is the exact board I want to set up next. You’ll have to update after a couple sessions on how it feels

303 boards has the 8.5 and 8.75 for 30% off. I think it was 43$ I just copped the 8.75

[MysticalTypeExperience]

Still the crispiest setup I've ever had

Polar Shin 8.5 + Jessup
Indy FH 8.5 + Indy hard
F4 conical full 54
Minilogos

[palach303]

Double Post 

https://ibb.co/zrxzDjX
Heroin Symmetrical Egg (graphic towards nose scratched off)
Shake junt rail
Indy mid baseplate with Ace 55 classic hanger and Ace bushings
riser pads
Boardycakes 49mm wheels
Bones Reds
Penny hardware

This thing is super fun <3

Just curious, what benefits does that truck combo offer? Why not just whole indys or aces?

[Banned from the room]

Still the crispiest setup I've ever had

Polar Shin 8.5 + Jessup
Indy FH 8.5 + Indy hard
F4 conical full 54
Minilogos



This graphic is fire

7.75 Enjoi oversize Panda R7
7.87 Tensor mag lights 5.25
53mm Ricta crystal cores 95a
Bones Swiss bearings
Thunder allen hardware
Jessup grip

I like it +1

[realbasedgod112]

7.75 Enjoi oversize Panda R7
7.87 Tensor mag lights 5.25
53mm Ricta crystal cores 95a
Bones Swiss bearings
Thunder allen hardware
Jessup grip

this is the most 2000's setup i've seen so far in 2022... i fuck with it.

[Violator]

@palach303 it's mostly because I like the inverted kingpin and needed a wider truck so instead of buying new indys I just used some Ace hangers I already had. I don't run a bottom washer so they're super turny and they skate really well 

[Jonny7.5Alive]

Expand Quote

7.75 Enjoi oversize Panda R7
7.87 Tensor mag lights 5.25
53mm Ricta crystal cores 95a
Bones Swiss bearings
Thunder allen hardware
Jessup grip

[close]

this is the most 2000's setup i've seen so far in 2022... i fuck with it.

I dig this hard

[augustmoon]

back on an 8.25 Polar and feeling good again.

Polar 8.25
Venture 5.6
Spitfire FF 53
quantum atoms
Pepper grip

my last board was a blank that I spraypainted, but I put too many layers of paint and it felt really heavy, dead, and off balance.  When I went to change it, I stripped a couple bolts, and lost my shit trying to drill out the bolts and ended up with this:



accidentally cut through the baseplate, so it was all for naught.  luckily I had an extra set of baseplates in a box.  lucky i didn't lose a finger or a hand, i was swinging the recip around like I was in Texas Chainsaw Massacre

[fakiefs180]

back on an 8.25 Polar and feeling good again.

Polar 8.25
Venture 5.6
Spitfire FF 53
quantum atoms
Pepper grip

my last board was a blank that I spraypainted, but I put too many layers of paint and it felt really heavy, dead, and off balance.  When I went to change it, I stripped a couple bolts, and lost my shit trying to drill out the bolts and ended up with this:



accidentally cut through the baseplate, so it was all for naught.  luckily I had an extra set of baseplates in a box.  lucky i didn't lose a finger or a hand, i was swinging the recip around like I was in Texas Chainsaw Massacre

That Setup looks awesome. How you like the Polar 8.25?

And mate, how many layers of paint went on that other deck? That looks dangerous. I usually do one layer of spraypaint.

[augustmoon]

i put way more than I usually do.  i spraypainted some dumb shit that I regretted, and went back to paint over it, and it was just too much.  i barely broke through to the woodgrain after nosesliding all day. 

word of advice: don't overdo the paint.  it'll make your board feel warped and waterlogged

Polar 8.25 feels great.   a little long for my taste, but just feels right to me.  Went up from an 8.0 and wish I'd done it sooner (just wish I didn't still have two 8.0 killing floor decks still in the shrink that I don't know what to do with)

[Ol Nick]

my last board was a blank that I spraypainted, but I put too many layers of paint and it felt really heavy, dead, and off balance.  When I went to change it, I stripped a couple bolts, and lost my shit trying to drill out the bolts and ended up with this:



accidentally cut through the baseplate, so it was all for naught.  luckily I had an extra set of baseplates in a box.  lucky i didn't lose a finger or a hand, i was swinging the recip around like I was in Texas Chainsaw Massacre

Fuck yeah

[manysnakes]

Still the crispiest setup I've ever had

Polar Shin 8.5 + Jessup
Indy FH 8.5 + Indy hard
F4 conical full 54
Minilogos

One of my all-time favorite graphics. Just replaced my worn out Shin P9 with a brand new Shin P9, and I'll probably grab this in an 8.25" popsicle while my local shop is blowing them out cheap.

[lamfordie]

8.25 SW blank spray painted pink with a bunch of 002 sticker (shout out if you know who she is)
5.8 Venture Hollow Light
53 AG Sml Wheels
Mob
Reds

[Ol Nick]

8.25 SW blank spray painted pink with a bunch of 002 sticker (shout out if you know who she is)
5.8 Venture Hollow Light
53 AG Sml Wheels
Mob
Reds

I don’t know shit about anime but that whole setup/pink/tail collage is tight.

[FatGuy92]

8.25 SW blank spray painted pink with a bunch of 002 sticker (shout out if you know who she is)
5.8 Venture Hollow Light
53 AG Sml Wheels
Mob
Reds

I honestly didn’t know the zero two fandom was alive and well in 2022. This just reminded me how behind on anime I am.

[Freelancevagrant]

Just set this guy up.

Uma toenail shape 9” x 32.12” 14.3” wb
Film 6.0/155 trucks
Spitfire f4 conical full 54mm 97a
Bones big balls
Jessup
7/8” Allen hardware

[BartHarleyJarvis]

Just set this guy up.

Uma toenail shape 9” x 32.12” 14.3” wb
Film 6.0/155 trucks
Spitfire f4 conical full 54mm 97a
Bones big balls
Jessup
7/8” Allen hardware

Hell yeah, that's a bodacious set up

[tom]

The VX deck I set up just under a month ago feels the same as it did on day 1. Genuinely impressed. That said I swapped my old trucks and bearings over to this Evisen non-football double taper board with some radial fulls. I didn't get to skate once over the long weekend because of a brush with food poisoning. The silver lining is that my local weekday/night flat ground and curb spot just got repaved while I was sick


8.8x31.4 14'' wb that tapers significantly
58mm Radial fulls
Bones Swiss freshly cleaned and lubed
Thunder 148's that are on their second life
Real 3 ply risers

prob really good for impossibles