The Set-up Thread

[FUBAR]

Thats freakin cool! I keep thinking about making myself either a low box/manny pad (4-5 inch high) or a wood double sided “curb” since I cant find one. Just unsure how to keep it from tipping over.

[Ride it to dust]

Thats one thing with that block, it tends to skid around a bit if its not sat back against something. Board/lipslides are fine but anything else the fucker moves. Its never tipped though.
It also has two different angles which is a nice feature.
Im tempted to glue some very thin rubber pads to the ends to stop it sliding about.

[Urtripping]

Pennswood blank 8.5
60mm conical fulls
Ace af1 55s
Real 3ply risers
Big ol fuckin DGK stickie
Lesgo

[radcunt]

I’ve got a Hockey John Fitzgerald coming, an 8.5 (31.9 long 14.25wb) which is the skinniest board & first popsicle I’ve ridden for a long while. With Hockeys steeper kicks what trucks would work best? I ride indys or aces usually. Looking at ace 44, maybe lows.

[Richard Skidder]

I’ve got a Hockey John Fitzgerald coming, an 8.5 (31.9 long 14.25wb) which is the skinniest board & first popsicle I’ve ridden for a long while. With Hockeys steeper kicks what trucks would work best? I ride indys or aces usually. Looking at ace 44, maybe lows.

Lower truck would definitely help with ghost pop on those steep kicks. If you go Indy definitely do forged or mid. If you get Ace lows let us know what you think as I am curious about those myself.

[Gene_Harrogate]

Pennswood blank 8.5
60mm conical fulls
Ace af1 55s
Real 3ply risers
Big ol fuckin DGK stickie
Lesgo

Damn that’s a beauty.

[radcunt]

Expand Quote

I’ve got a Hockey John Fitzgerald coming, an 8.5 (31.9 long 14.25wb) which is the skinniest board & first popsicle I’ve ridden for a long while. With Hockeys steeper kicks what trucks would work best? I ride indys or aces usually. Looking at ace 44, maybe lows.

[close]

Lower truck would definitely help with ghost pop on those steep kicks. If you go Indy definitely do forged or mid. If you get Ace lows let us know what you think as I am curious about those myself.

Yeah,  i'm up in the air as to what truck I like more, Aces feel immediately more fun but harder to do tricks on, Indys are just super comfortable. The Mid Forged Hollow 149s could be the go. I havent bought non 66/169 sized trucks in yeaaaaars. 

[patchouli]

Antihero Eagle 8.75 x 31.75 x 14.25 wb (IV press so the concave is a bit more mellow)
Indy 159s with 1/16 soft risers
Spitfire F4 99D Conical 56mm
Bones Swiss

Really digging this setup, it looks like an inconspicuous shop deck .

[hobochimp]

Antihero Eagle 8.75 x 31.75 x 14.25 wb (IV press so the concave is a bit more mellow)
Indy 159s with 1/16 soft risers
Spitfire F4 99D Conical 56mm
Bones Swiss

Really digging this setup, it looks like an inconspicuous shop deck .

Very nice. How is the 8.75 mis registered eagle shape?

[LebowskisRug]

I’ve got a Hockey John Fitzgerald coming, an 8.5 (31.9 long 14.25wb) which is the skinniest board & first popsicle I’ve ridden for a long while. With Hockeys steeper kicks what trucks would work best? I ride indys or aces usually. Looking at ace 44, maybe lows.

My buddy rides it on forged Indy's and likes, it's mellower and less square than most FA/Hockey shapes.

[logjammin]

8.25 misregistered eagle with 14" wheelbase
1 1/8" Shortys hardware
hard Dooks risers 1/8"
Ace AF1 44 hangers on top of stage 7 baseplates w/ inverted kingpins
trying Bronson Raw's for the first time they're nuts
58mm Radial Fulls

[Idk]

That’s a really full square shape for an Anti Hero.

[DeepSpace9mm]

Polar 8.75
Ace AF1 66 Hollows
Ace 1/8” risers
F4 OG Classics 55mm
Quantum Fusion bearings
Pepper grip.

I’m digging the 66’s on an 8.75.

Shout out to Quantum. These things are fast.

Even after killing my last deck with a long, misty, and wet session where I didn’t bother to avoid puddles, the bearings stayed fast and smooth.

It’s possible that they feel even better now after some heavy usage, a cleaning, and a couple drops of their lube.

[Lee Ralphs Dear Old Mum]

Beautiful @Deepspace9mm

I picked up some 66 hollows the other day and I have to admit they did feel light.

[sweet son of a bitch]

Expand Quote

Pennswood blank 8.5
60mm conical fulls
Ace af1 55s
Real 3ply risers
Big ol fuckin DGK stickie
Lesgo

[close]

Damn that’s a beauty.

I 2nd that’s beauty. How do you like the real risers?

[Ride it to dust]

8.25 misregistered eagle with 14" wheelbase
1 1/8" Shortys hardware
hard Dooks risers 1/8"
Ace AF1 44 hangers on top of stage 7 baseplates w/ inverted kingpins
trying Bronson Raw's for the first time they're nuts
58mm Radial Fulls

Looks quality! Bet those radials chomp the crust

[Urtripping]

Expand Quote

Expand Quote

Pennswood blank 8.5
60mm conical fulls
Ace af1 55s
Real 3ply risers
Big ol fuckin DGK stickie
Lesgo

[close]

Damn that’s a beauty.

[close]

I 2nd that’s beauty. How do you like the real risers?

Friggin swear by em. These are damn near 6 months old and hanging in there! Still crisp and not flat or dead like plastic ones.

[hobochimp]

Expand Quote

Expand Quote

Expand Quote

Pennswood blank 8.5
60mm conical fulls
Ace af1 55s
Real 3ply risers
Big ol fuckin DGK stickie
Lesgo

[close]

Damn that’s a beauty.

[close]

I 2nd that’s beauty. How do you like the real risers?

[close]

Friggin swear by em. These are damn near 6 months old and hanging in there! Still crisp and not flat or dead like plastic ones.

+1 real wooden risers are the truth

[dr.prestige]

Jumping on the Real wooden riser train, they're dope. I love that they don't dampen vibrations from the wheels like rubber ones do

[big_kev_215]

Limo 8.38”
Ace 44 Classics
Spitfire F4 55mm Classics
Swiss
Pepper
Lil Jawns Rails
Ishods

[GumOnMyGrip]

Jumping on the Real wooden riser train, they're dope. I love that they don't dampen vibrations from the wheels like rubber ones do

+3, +4 whatever. The wooden risers are the best.

[TwisT]

Giddy as a kid on this graphic. It’s really cool. Bought a second one for the collection.

DGK 8.25
Thunder 148 w/bones medium bushings
Bones stf 99a 52mm v4 slims
Bones Swiss
Jessup

[rocklobster]

Fuck yeah lenticular graphics are the shit!

[Maccat]

Antihero Eagle 8.75 x 31.75 x 14.25 wb (IV press so the concave is a bit more mellow)
Indy 159s with 1/16 soft risers
Spitfire F4 99D Conical 56mm
Bones Swiss

Really digging this setup, it looks like an inconspicuous shop deck .

Modern classic.

[fuzzy bat]

first eagle I've skated, third on this page 

AH 8.5
Ace AF1 55s
Spitfire F4 55s

shoes are copa nationales

[Lee Ralphs Dear Old Mum]

Huffer
AF1 60s with old broken in Ace/ Krux bushings
1/8" Ace risers
58mm F4 classics worn down to about 56mm
Swiss 6 a few years old

Roller Derby Mustang with Clay wheels and loose ball bearings.

[downtodevin]

8.25 misregistered eagle with 14" wheelbase
1 1/8" Shortys hardware
hard Dooks risers 1/8"
Ace AF1 44 hangers on top of stage 7 baseplates w/ inverted kingpins
trying Bronson Raw's for the first time they're nuts
58mm Radial Fulls

This setup is wild! I love it!

[Scottboarding]

I didn't plan on posting a setup but considering all the other eagles people are posting I felt obligated to share mine.


AH 8.38
Indy 149 Standards w/ Bones Hards
Spitfire 52mm F4 99a Classics
Quantums
Mob
Vans Skate Half Cab

[dunc]

Heroin egg. The Mandy one. Just over 9 in the mid section.
Indy 159
F4 conical 54
Powell rails
Cheapshots
NB# 440

[manysnakes]

I keep an Eagle at my mom’s house for when I visit, but unfortunately I won’t be there until December so I cannot contribute to this page.