The Set-up Thread

[MOE SYZLAK]

Fixer has some pretty sweet looking egg shapes.

Can confirm, the speedball full egg shape is bitchn’

[Plan9Customs]

917 8,25"
pepper xg
indy titanium 144
spitfire conical fulls 56
indy hardware

Rad setup and hope you made a template of the little surfboard graphic so when it’s dead you can cut it to that shape for a tiny cruiser(if that’s your thing).

[Plan9Customs]

Realized I've been skating my current deck for almost 6 months now so treated myself to a new one. I kept the grip more toned down this time because I used a super creased up sheet that I had stored badly. The photos are a lil weird since my phone camera is broken and won't focus unless its on .5 mode but whatever





8.5 There Marbie shape
5.8 Ventures
Spitfire F4 conical fulls that started off at 53mm
Bones Swiss
Mob

Another rad setup and love the grip.

[breaker19er]

Quasi 8.5 BBS
55mm Bones X99
Reds
Slappy ST1 Inverted Ultra Low KP
Bones hardware

X-formulas felt too grippy on the mini so switched back to 101 spits.
Will save them for the streets once the snows melted.

[Hqjdncm]

Quasi 8.5 BBS
55mm Bones X99
Reds
Slappy ST1 Inverted Ultra Low KP
Bones hardware

X-formulas felt too grippy on the mini so switched back to 101 spits.
Will save them for the streets once the snows melted.

That’s such a sick mini
Is it urs?

[scab]

Realized I've been skating my current deck for almost 6 months now so treated myself to a new one. I kept the grip more toned down this time because I used a super creased up sheet that I had stored badly. The photos are a lil weird since my phone camera is broken and won't focus unless its on .5 mode but whatever





8.5 There Marbie shape
5.8 Ventures
Spitfire F4 conical fulls that started off at 53mm
Bones Swiss
Mob

Sticker twinsies!






8.5 Ishod twin (for the sickos: 32.2 /14.5 / I stamp)
5.8 V8s
54mm 93 radial fulls (Bannerot wheel)
Quantum Isotopes
Jessup

[breaker19er]

Expand Quote

Quasi 8.5 BBS
55mm Bones X99
Reds
Slappy ST1 Inverted Ultra Low KP
Bones hardware

X-formulas felt too grippy on the mini so switched back to 101 spits.
Will save them for the streets once the snows melted.

[close]

That’s such a sick mini
Is it urs?

Yes!
20' wide x 3' tall with a 2 1/4' love seat.
6 1/2' radius so steep enough to properly lock smiths and feebles

[Elijah Chandler]

polar 9.0 / 32.5 / 14.5
6.1s lights (diy v8)
worn down radial fulls
quantum atoms
shop hardware
pepper
nb 480s

gawdamn this is nice

[Kunnallisjäte]

Hardbody 8.38
Ace inverted baseplate / Lurpiv hollow 150 hanger
Spitfire classics 55 99d
Bones swiss
Pepper XG / greyarea

[suspicouswebsite]

8.5 there
5.8 venture v8 with hollow hangars
56 classics
bronson raws
mob

[Hqjdncm]

Expand Quote

Expand Quote

Quasi 8.5 BBS
55mm Bones X99
Reds
Slappy ST1 Inverted Ultra Low KP
Bones hardware

X-formulas felt too grippy on the mini so switched back to 101 spits.
Will save them for the streets once the snows melted.

[close]

That’s such a sick mini
Is it urs?

[close]

Yes!
20' wide x 3' tall with a 2 1/4' love seat.
6 1/2' radius so steep enough to properly lock smiths and feebles

Damn that’s so sick

[Donnie Wahlberg]

https://imgur.com/a/1lmHbdR#4UhILzU
Ishod TT
147 Thunders
$10 53mm DGK wheels that roll better than having no wheels
Shop grip
 Crocs

[henry kingpin]

https://imgur.com/a/1lmHbdR#4UhILzU
Ishod TT
147 Thunders
$10 53mm DGK wheels that roll better than having no wheels
Shop grip
 Crocs

where'd you get the silver bushing cups?

[mrosk8]

Realized I've been skating my current deck for almost 6 months now so treated myself to a new one. I kept the grip more toned down this time because I used a super creased up sheet that I had stored badly. The photos are a lil weird since my phone camera is broken and won't focus unless its on .5 mode but whatever





8.5 There Marbie shape
5.8 Ventures
Spitfire F4 conical fulls that started off at 53mm
Bones Swiss
Mob

see some Dan Drehobl influence on grip

[GashBandicoot]

8.25 Real Easy Rider 1 stamp (32.07 x 14)
5.6 V-lights that are a combo of the Piombo v-hollow baseplate and a cast hangar + a flat top washer obviously
54mm X97 v1. Usually ride F4 but these are a nice change of pace. Only gripe is doing a lil manual slide on rock and rolls down the transition but I've gotten used to it.
Swiss
Pepper
Girl 1" Allen
Vans Curren

Set this up on Sunday for spring! I like the subtle glitter in the graphic and the hints of orange help tie in the baseplate color. Comfy shape but there's no secret sauce here that makes me skate any better or worse, which I guess was to be expected. Knowing that I'm not skilled enough for small changes in dimensions to matter is a bit of a silver lining. The flips still (sometimes) flip, the shuvs still shuv, and the grinds still grind. Varial heels feel good on it and today I board slid up a small rail 3 times in a row which is something I've never done before. Had pretty decent consistency on back 5050s on the flat bar, too. These hangars are starting to get a little bit of axle slip so I may swap on the hollow 5.6 hangars that came with the baseplates. Was hoping to axle them but I don't skate crusty ledges or curbs often enough to outpace the other wear and tear replacement criteria. The ends of the axles get ground down to the nuts well before I even get close to it. Maybe next time. Good board though.

[Allen.]

Not set up, yet, but I finished this one in about 2 hours (not counting time for the paint drying)
Spray paint, thermal sticker paper and paint pen ‘Solar Crisis’

[chillclinton87]

Not set up, yet, but I finished this one in about 2 hours (not counting time for the paint drying)
Spray paint, thermal sticker paper and paint pen ‘Solar Crisis’

Love it!

[MonsPubis]

Spring setup

Girl board 8.19
Venture V-Light 5.6
Spitfire F4 52mm 99a
Bronson Raw
Jessup
Girl longneck 7/8 hardware

[Elijah Chandler]

8.25 Real Easy Rider 3 stamp (32.07 x 14)
5.6 V-lights that are a combo of the Piombo v-hollow baseplate and a cast hangar + a flat top washer obviously
54mm X97 v1. Usually ride F4 but these are a nice change of pace. Only gripe is doing a lil manual slide on rock and rolls down the transition but I've gotten used to it.
Swiss
Pepper
Girl 1" Allen
Vans Curren



Set this up on Sunday for spring! I like the subtle glitter in the graphic and the hints of orange help tie in the baseplate color. Comfy shape but there's no secret sauce here that makes me skate any better or worse, which I guess was to be expected. Knowing that I'm not skilled enough for small changes in dimensions to matter is a bit of a silver lining. The flips still (sometimes) flip, the shuvs still shuv, and the grinds still grind. Varial heels feel good on it and today I board slid up a small rail 3 times in a row which is something I've never done before. Had pretty decent consistency on back 5050s on the flat bar, too. These hangars are starting to get a little bit of axle slip so I may swap on the hollow 5.6 hangars that came with the baseplates. Was hoping to axle them but I don't skate crusty ledges or curbs often enough to outpace the other wear and tear replacement criteria. The ends of the axles get ground down to the nuts well before I even get close to it. Maybe next time. Good board though.

bones on an otherwise all DLX setup is a violation

[alph]

bones v1 is the best looking wheel for me

[roba]

hlc 8.375 x 14.25 x 31.9 or something like that
venture 5.8 flat top washer
spitfire 57/97 radials ( thanks to @scab )
bronson g3 nora
jessup grip
adv shell toes

set up inspiration:

[Llewellyn Moss]

Spring setup

Girl board 8.19
Venture V-Light 5.6
Spitfire F4 52mm 99a
Bronson Raw
Jessup
Girl longneck 7/8 hardware

Does that measure true to 8.19/the 8.1875 spec?

[Esmith5488]

8.25 Real Easy Rider 3 stamp (32.07 x 14)
5.6 V-lights that are a combo of the Piombo v-hollow baseplate and a cast hangar + a flat top washer obviously
54mm X97 v1. Usually ride F4 but these are a nice change of pace. Only gripe is doing a lil manual slide on rock and rolls down the transition but I've gotten used to it.
Swiss
Pepper
Girl 1" Allen
Vans Curren

Set this up on Sunday for spring! I like the subtle glitter in the graphic and the hints of orange help tie in the baseplate color. Comfy shape but there's no secret sauce here that makes me skate any better or worse, which I guess was to be expected. Knowing that I'm not skilled enough for small changes in dimensions to matter is a bit of a silver lining. The flips still (sometimes) flip, the shuvs still shuv, and the grinds still grind. Varial heels feel good on it and today I board slid up a small rail 3 times in a row which is something I've never done before. Had pretty decent consistency on back 5050s on the flat bar, too. These hangars are starting to get a little bit of axle slip so I may swap on the hollow 5.6 hangars that came with the baseplates. Was hoping to axle them but I don't skate crusty ledges or curbs often enough to outpace the other wear and tear replacement criteria. The ends of the axles get ground down to the nuts well before I even get close to it. Maybe next time. Good board though.

This shape sent me down the darkest madness path I have ever experienced lol

[DanRar009]

Been awhile since I had all new everything and these skate warehouse blanks are really nice. Big difference between these premium ones and the older ones. My daughter wanted to sticker this one up for me this time and added a few home made ones as well
8.75 x 32.1
Thunder 151s
Formula 4s 53mm 97a
Bronson g3
Nb# 480

[MonsPubis]

Expand Quote

Spring setup

Girl board 8.19
Venture V-Light 5.6
Spitfire F4 52mm 99a
Bronson Raw
Jessup
Girl longneck 7/8 hardware

[close]

Does that measure true to 8.19/the 8.1875 spec?

It does measure true

[scab]

hlc 8.375 x 14.25 x 31.9 or something like that
venture 5.8 flat top washer
spitfire 57/97 radials ( thanks to @scab )
bronson g3 nora
jessup grip
adv shell toes

set up inspiration:

Looking clean! Hope the wheels work out for you.

[typeischeap]

So many rad local brands right now in Central Texas. Killing it!

Golden Age Industries "Floating Friends" 8.5x32x14.3
Venture VLT 5.8
Spitfire F4 CF 53mm/99a
Bones Swiss 6
Slappy 7/8" allen
Pepper midnight (they didn't have galaxy)
Dunks

[Elijah Chandler]

So many rad local brands right now in Central Texas. Killing it!

Golden Age Industries "Floating Friend" 8.5x32x14.3
Venture VLT 5.8
Spitfire F4 CF 53mm/99a
Bones Swiss 6
Slappy 7/8" allen
Pepper midnight (they didn't have galaxy)
Dunks

who are they pressed by?

[Maccat]

Damn this is sick.

[DarkPools]

@Elijah Chandler  if it's local in Texas, then it might be HLC, as that woodshop is in Texas