Skate Shit you've Bought Recently

[GlenSuggittsflexfit]

Quasi proto 8.25 and polar surf pants today. I have a dozen un skated boards now.

A perfect pairing with some Crockett hi's me thinks.

[Ok]

Expand Quote

Quasi proto 8.25 and polar surf pants today. I have a dozen un skated boards now.

[close]

A perfect pairing with some Crockett hi's me thinks.

Crockett hi’s tts?

[arrbee]

Expand Quote

Quasi proto 8.25 and polar surf pants today. I have a dozen un skated boards now.

[close]

A perfect pairing with some Crockett hi's me thinks.

Such a good combo!

Expand Quote

Expand Quote

Quasi proto 8.25 and polar surf pants today. I have a dozen un skated boards now.

[close]

A perfect pairing with some Crockett hi's me thinks.

[close]

Crockett hi’s tts?

They were for me.

[WPG]

Bought some Kr3w Tom Penny Denim cargo pants this weekend off Grailed

[Ok]

Expand Quote

Expand Quote

Quasi proto 8.25 and polar surf pants today. I have a dozen un skated boards now.

[close]

A perfect pairing with some Crockett hi's me thinks.

[close]

Such a good combo!

Expand Quote

Expand Quote

Expand Quote

Quasi proto 8.25 and polar surf pants today. I have a dozen un skated boards now.

[close]

A perfect pairing with some Crockett hi's me thinks.

[close]

Crockett hi’s tts?

[close]

They were for me.

Thanks, appreciate that.

[munchbox]

adidas tyshawns

just walking around in them until i reach the spot, forefoot feels plush. gonna order some fp gamechangers and see if i found the perfect combo

[funeral_tuxedo]

I just ordered the Pfanner 8.06
The Julien board was already sold out.

[TwisT]

Picked up a doubles ltd shirt!

Along with tees from evisen and magenta.

[Murge]

Picked up a doubles ltd shirt!

Along with tees from evisen and magenta.

Doooo whut?!?!

[hiljentaa]

Enjoi Deedz 8.375 football.

I'm not into the graphic though. Does anyone have any tips on removing Dwindle graphics without sanding? Would acetone applied to a towel work to wipe it off? Might just spray it white and call it good, but it has a cool colored bottom ply that would be cool to clear over.

Tensor ATG Mag Light 5.5.

Always been interested to try these. Found 'em for 20% off, so here we go I guess. Will set em up on the Deedz deck probably.

Need wheels for it, waiting for more shops to have 51mm F4 101a tablets.

[YungJugg]

Enjoi Deedz 8.375 football.

I'm not into the graphic though. Does anyone have any tips on removing Dwindle graphics without sanding? Would acetone applied to a towel work to wipe it off? Might just spray it white and call it good, but it has a cool colored bottom ply that would be cool to clear over.

Tensor ATG Mag Light 5.5.

Always been interested to try these. Found 'em for 20% off, so here we go I guess. Will set em up on the Deedz deck probably.

Need wheels for it, waiting for more shops to have 51mm F4 101a tablets.

Yeah acetone removes graphics super easily. Just go light and make a lotta rounds with your rag. You don’t wanna soak your plys obviously.

[BL0B]

Expand Quote

Picked up a doubles ltd shirt!

Along with tees from evisen and magenta.

[close]

Doooo whut?!?!

"doubles ltd shirt"

gonna be a collectors item when that dude shoots up a popeyes chicken.

[GlenSuggittsflexfit]

Indy 109s

[sadnocomply]

Nike Sb Shashiko’s from garage skate shop for the low. Sorry gilby I’ll be back in those crocketts soon

[Xen]

8.25/148

[Sativa Lung]

8.25/148

Ahh you found some 148s? I just picked up an 8.25 proto too. Figured I might as well get one now while they're available.

I'm still in Texas so I'm going to have a shit load of stuff waiting for me when I get home. Im probably forgetting some shit, but I know for sure I have boxes from DOA and ToPX, a pair of nb 440 high, a bunch of grip and stickers from various places, and then that quasi deck. The mail room people at my building probably hate me so much right now.

[Beeker]

Ahh you found some 148s? I just picked up an 8.25 proto too. Figured I might as well get one now while they're available.

I'm still in Texas so I'm going to have a shit load of stuff waiting for me when I get home. Im probably forgetting some shit, but I know for sure I have boxes from DOA and ToPX, a pair of nb 440 high, a bunch of grip and stickers from various places, and then that quasi deck. The mail room people at my building probably hate me so much right now.

Did Rob mitosis into you and TumKayo?

I got a third set of Krux K4 since I'm assuming they'll be discontinued soon. With Ace bushings they are god-tier. Pretty sure the new ones will have a different feel with the new pivot cup design and I'm also strangely turned off by the wave on the baseplate of the K5. I'll still try 'em but I want to have a few K4's on backup.

[Xen]

Expand Quote

8.25/148

[close]

Ahh you found some 148s? I just picked up an 8.25 proto too. Figured I might as well get one now while they're available.

I'm still in Texas so I'm going to have a shit load of stuff waiting for me when I get home. Im probably forgetting some shit, but I know for sure I have boxes from DOA and ToPX, a pair of nb 440 high, a bunch of grip and stickers from various places, and then that quasi deck. The mail room people at my building probably hate me so much right now.

Yeah, not team hollows, so it's either get a set of 147 TH and swap plates or it's riser time, have some thunder risers kicking around. Tactics just got some yesterday, last week I was going to bite via Amazon/TGM but the price was too much...they wanted 69$ for a pair and that was with prime and even then they sold out pretty fast; still can't find any TI.

The proto was/is probably one of my favorite boards (skated 4-5 of them all paired with Thunders); haven't been feeling the boards I have on hand so time to get to something I know I like...I think it was the lack of a squareish shape and I've been off thunders for a minute (ditched my indy mids to a friend).

[Noble Experiment]

Just ordered this

[DarkPools]

Just ordered this

Would be funny to wear this shirt into bed with your significant other and they're like "babe, how can you be awake if you're going to sleep" or something like that. Haha

[Xen]

Just ordered this

Nice colorway!

[munchbox]

is that a redbubble awake shirt

[Cthulhu!]

Would be funny to wear this shirt into bed with your significant other and they're like "babe, how can you be awake if you're going to sleep" or something like that. Haha

It's ok they made a shirt just for that occasion.

[stets]

Picked myself up an early Christmas gift from 35th North:


Excited to finally get another set of 215's after their supply drought. Might be trying to cut them down to 9 inch, to be able to rock that original hangar design on a Powell Tommy G reissue I've been wanting to set up after seeing Chico skate that one.

I've seen someone on Instagram do that. You just have to cut away the aluminum carefully, hammer it off, cut the extra axel off, and rethread the new exposed axel to the appropriate length. I have the tools, been wanting to try it for awhile.

I'll post some process photos if I do that.

Also stoked to try out these 97a F4's on some rough streets.

[Big Baby Jesus]

Picked myself up an early Christmas gift from 35th North:


Excited to finally get another set of 215's after their supply drought. Might be trying to cut them down to 9 inch, to be able to rock that original hangar design on a Powell Tommy G reissue I've been wanting to set up after seeing Chico skate that one.

I've seen someone on Instagram do that. You just have to cut away the aluminum carefully, hammer it off, cut the extra axel off, and rethread the new exposed axel to the appropriate length. I have the tools, been wanting to try it for awhile.

I'll post some process photos if I do that.

Also stoked to try out these 97a F4's on some rough streets.

God speed. Saw a video where danny dicola did this too.

[BoxStuffer]

I've seen someone on Instagram do that. You just have to cut away the aluminum carefully, hammer it off, cut the extra axel off, and rethread the new exposed axel to the appropriate length. I have the tools, been wanting to try it for awhile.

I'll post some process photos if I do that.

I don't have the tools, or skills to do that, so I'd be super stoked to see the process. 

[GoneWithTheSchwinn]

Yes, please post photos of the process! That's sick you are customizing them!

[BL0B]

not sure how these turned out for this guy.

[Mbrimson88]

I know I mess with things a lot but this is crazy taking it to a whole new level, as well as ending up with a very unique product at the end.

Wondering how much of a market there would be for cast Indy hangers in various sizes but in the shape of those reissued 215s, as I know people had been looking for the originals for a long time, as well as asking for another size up from 169s, but not as wide as 215s.

[Frank]

if i was about that look i'd probably try ace trucks first, but it's cool dicola goes so far. why not if your able to and that's what you want to skate.