Skate Shit you've Bought Recently

[FUBAR]

Went in for an 8.75, came out with a shop shirt.
Yew.

[JM]

Expand Quote

...

What’s the result of the spending spree?
- gave away x99 to friend as early Christmas present. Went back to x97.
- Black bushings too hard, not using
- Blue Bushing too hard, not using
- hollows were too loud, so added “Liquid Nails” type epoxy to bottom opening of kingpin under truck. Seems to help deaden high pitchy-ness

...

[close]

This is totally ridiculous and crazy. But I applaud this kind of mad sensibility with all my heart.

Thank you for the support. I blame the slap boards and Ben for it.

[JM]

How are the hollows loud?? Are you referring to how they grind or something else?

I've skated a few hollow Indys and never experienced this high pitch sound you are talking about @JM

The vibrations are louder… so grinding on chunky ledge yeah, but most noticeable when rolling on rougher ground.

It’s more “plink” than “plunk”.

I just came off skating standard base, standard kingpin, and titanium hangar (frankenindy)… so no hollow anywhere.

I hope you never catch this kind of neuroticism.

[LebowskisRug]

I actually like the way my hollow V Cast sound when stomping a trick. It's like a nice loud thud

[Uncle Flea]

Expand Quote

How are the hollows loud?? Are you referring to how they grind or something else?

I've skated a few hollow Indys and never experienced this high pitch sound you are talking about @JM

[close]

The vibrations are louder… so grinding on chunky ledge yeah, but most noticeable when rolling on rougher ground.

It’s more “plink” than “plunk”.

I just came off skating standard base, standard kingpin, and titanium hangar (frankenindy)… so no hollow anywhere.

I hope you never catch this kind of neuroticism.

Fuck that's exactly the difference.

It's like a tinselly bright sound.










Boom!!!!

9" Ben Raybourn
6.1s!!!

Shorty's longer hardware for when the Beat Downs 66.6 drop in the spring.


I'm low key scared I'm not going to get a set. I feel like asking someone at Dlx if I could buy a set early.

Yeah I'm really nervous about not seeing a set in time.

This is a historic f****** event. Dude spitfire I don't think they've ever done a wheel that big.
They started with the smallest of the small. I got some old butter tablets in my toolbox.
There's been a 63 I think for Grosso.

So i feel like collectors are going to jump on them.

Especially because they have the dope ass cmyk Warpaint
graphic.

I need a set to ride and a set to keep.

I don't like saying that they will last me the rest of my life.
I hope I live way longer than that

And I know when people like Pedro and Funk and Greene get these wheels it's going change some shit.

Kids are going to trip out once the feel the wind whipping in one ear and out the other.

We really are at the forefront of speed now.

Shits going to change shit like big time.

[moonordie]

They had 67mm bigheads.

[hiljentaa]

Lmao hell yeah Flea.

I grabbed two Western Edition boards. My first PS Stix. They both look really good, excited to skate em (& break em on some shitty flatground trick)

[munchbox]

@Uncle Flea  those dims look perfect
wish the nose and tail were more blunted imo
but should be a great setup, let us know how you like it

[big_kev_215]

Been of the shaped boards lately but Shimizu is one of my all-time favorites and this is small enough over the trucks to work with the 8.0” AF1 lows I’ve been skating.

[Xen]

@Uncle Flea All of that looks sick. Nice job.

Picked up some 5.8s and 54 x99s V6 (wide boys). Wish I would have gotten 6.1s as the 5.8s are feeling small with these wide wheels.

Venture/Skate Jawns 5.8s/bones x99s 54mm / dickies slim fit (but really aren't) / SW perforated grip (I'm loving this stuff)

[Thebird]

@Uncle Flea and @Xen coming in with some great gear.

What deck are you throwing that on @Xen?

[Uncle Flea]

@Uncle Flea All of that looks sick. Nice job.

Picked up some 5.8s and 54 x99s V6 (wide boys). Wish I would have gotten 6.1s as the 5.8s are feeling small with these wide wheels.

Venture/Skate Jawns 5.8s/bones x99s 54mm / dickies slim fit (but really aren't) / SW perforated grip (I'm loving this stuff)

Hell yeah.

Let's us know about how you like the wheels. They look sick. Kinda vintage looking that combo. Very nice.

I can't believe my board has a 14" wb. Tomorrow I'm skating flat all day then hitting the diy after I get rails.

I haven't done a board slide in 3 set ups. I've been feeling religious lately.

[Xen]

I threw them on my last 8.5 Foy twin tail (14.28wb) and had a great session.

Honestly the ventures felt great stock, no adjustment…but still wish I went 6.1 (for a specific curb spot)…I think I’ll nab some 6.1s for the madness…. But damn, you know how hard it was to find Hollow cast 5.8s, let alone that collab?

Not to repeat a post, I dropped some feedback in the wheels thread on those X 99s but suffice to say, the wheels felt haaard, much harder that my white x99s but the shape locked in and rolled out well.

[JM]

All y’alls gear on this page is sick.

Seeing those Ventures makes me want to get a set and try nose grinds again with them…

And there’s nothing like a fresh pack of Shorty’s  hardware. mmh-MMMH!

Here’s my panic buy from an extended Black Friday sale. Maybe going to make it first deck to hang on wall till it gets used (or kept as wall art because it’s so damn fine in person: opaque clear coat that has some glitter in it that shows the wood grain underneath. And blue top is super sweet. Just please no yellow… I do NOT like yellow)

[Mbrimson88]

All y’alls gear on this page is sick.

Seeing those Ventures makes me want to get a set and try nose grinds again with them…

And there’s nothing like a fresh pack of Shorty’s  hardware. mmh-MMMH!

Here’s my panic buy from an extended Black Friday sale. Maybe going to make it first deck to hang on wall till it gets used (or kept as wall art because it’s so damn fine in person: opaque clear coat that has some glitter in it that shows the wood grain underneath. And blue top is super sweet. Just please no yellow… I do NOT like yellow)

I think that was the board that was supposed to be "Mellow mold" or something similar, so if you have had DLX boards, or BBS in general before, how does it compare to those others?

Even to stand on it on carpet or something, does it feel flat or more mellow than any other board you have had recently?


* Maybe not after looking it up again.  That one is Zen with natural ply, from the catalog listing.  Some others were "mellow mold" or "mellow mold slick" from what I can see.

[moonordie]

[FUBAR]

Got an 8.75 shop deck and coupled w 6.1 full strength Ventures, it’s quite nice. My first 8.75 set up.

[Heshrat]

I bought some blue skinny jeans that I feel like make me look quite handsome and they skate well. Set up a new board with these white rails that look really cool

[Basingstoke]

Two packs of Shorty's Light Allen 7/8. One pack will be denuded of it's nuts and combined with Ace Hollow truck bolts.

[moonordie]

A Helás hoodie I found for cheap on Vinted.

[lulz]

[Xen]

the madness has me

8.75" slappy hollows (really impressed with how light they are)
53mm 99a spit lockins...of.all things

Help.

[JM]

Two packs of Shorty's Light Allen 7/8. One pack will be denuded of its nuts and combined with Ace Hollow truck bolts.

Fucking hell. Sounds like torture method.

[JM]

Expand Quote

All y’alls gear on this page is sick.

Seeing those Ventures makes me want to get a set and try nose grinds again with them…

And there’s nothing like a fresh pack of Shorty’s  hardware. mmh-MMMH!

Here’s my panic buy from an extended Black Friday sale. Maybe going to make it first deck to hang on wall till it gets used (or kept as wall art because it’s so damn fine in person: opaque clear coat that has some glitter in it that shows the wood grain underneath. And blue top is super sweet. Just please no yellow… I do NOT like yellow)

[close]

I think that was the board that was supposed to be "Mellow mold" or something similar, so if you have had DLX boards, or BBS in general before, how does it compare to those others?

Even to stand on it on carpet or something, does it feel flat or more mellow than any other board you have had recently?


* Maybe not after looking it up again.  That one is Zen with natural ply, from the catalog listing.  Some others were "mellow mold" or "mellow mold slick" from what I can see.

Oh man, sorry I need to turn on “notify me of replies”…

First thing I measured was the kick degree compared to my current DLX 8.38 (also Walker. Flocked. From Spring 2022)

They are both (II) and the tails are the same degrees, but the nose on this Zen is .5 to 1.0 degree less steep.

So both (II)’s are pretty much exactly the same.

Zen for sure. Was very Zen after seeing it arrive safely through USPS.

[Uncle Flea]

Sweet board.

These graphics are good. I hope spit keeps running pro models in this way.

[goodatmeth]

the madness has me

8.75" slappy hollows (really impressed with how light they are)
53mm 99a spit lockins...of.all things

Help.

Are slappies in any way better than royals? I'm dreaming of 149 ultra lights

[Mbrimson88]

Expand Quote

Expand Quote

All y’alls gear on this page is sick.

Seeing those Ventures makes me want to get a set and try nose grinds again with them…

And there’s nothing like a fresh pack of Shorty’s  hardware. mmh-MMMH!

Here’s my panic buy from an extended Black Friday sale. Maybe going to make it first deck to hang on wall till it gets used (or kept as wall art because it’s so damn fine in person: opaque clear coat that has some glitter in it that shows the wood grain underneath. And blue top is super sweet. Just please no yellow… I do NOT like yellow)

[close]

I think that was the board that was supposed to be "Mellow mold" or something similar, so if you have had DLX boards, or BBS in general before, how does it compare to those others?

Even to stand on it on carpet or something, does it feel flat or more mellow than any other board you have had recently?


* Maybe not after looking it up again.  That one is Zen with natural ply, from the catalog listing.  Some others were "mellow mold" or "mellow mold slick" from what I can see.

[close]

Oh man, sorry I need to turn on “notify me of replies”…

First thing I measured was the kick degree compared to my current DLX 8.38 (also Walker. Flocked. From Spring 2022)

They are both (II) and the tails are the same degrees, but the nose on this Zen is .5 to 1.0 degree less steep.

So both (II)’s are pretty much exactly the same.

Zen for sure. Was very Zen after seeing it arrive safely through USPS.

Ha yeah, not a worry with replies.

A good one for the wall or to skate, either way, win / win!

[big_kev_215]

Marcello Campanello 8.0”

[Xen]

Expand Quote

the madness has me

8.75" slappy hollows (really impressed with how light they are)
53mm 99a spit lockins...of.all things

Help.

[close]

Are slappies in any way better than royals? I'm dreaming of 149 ultra lights

They grind better on crunchy shit (why I switched) hell they feel on par or better than Indy grinds…turn wise I find them better for curbs and tranny; different tool for a different job.

They’re taller so I feel better on bigger wheels, less wheelbite overall regardless of wheel size.

Where royals are more thunder/venture, slappy are more ace/ Indy.

Coming off 159 royal ultra lights, I was kind of shocked how light the 159 slaps were…even compared to the 8.25 hollow IKPs.

YMMV.

[KBizzle]

-Hours is yours crewneck

-Nyjah 2's, couldn't turn down a $40 beater pair of skate shoes from the Nike outlet.