Skate Shit you've Bought Recently

[Seventyfrigginseven]

I ordered another Bannerot love seat deck today. I love this shape and plan on starting a stack of them whenever money permits.

[rocklobster]

2 boards off Ambush - a WKND and one of their shop boards. Managed to flip 2 Element boards I got during their sale a few months back which covered the cost of shipping and soft goods I got, great price but there was no way I was going to ride a Nyjah deck in public.

[Nth syd bear]

I actually sold a palace board the other day which justified the Kenny Anderson skidul shape i bought this morning

Got some ace 44's and magnesium baseplates too and shit load of other stuff
I got to chill out decks are piling up

[Gray Imp Sausage Metal]

I actually sold a palace board the other day which justified the Kenny Anderson skidul shape i bought this morning

Got some ace 44's and magnesium baseplates too and shit load of other stuff
I got to chill out decks are piling up

fuck yeah, that’s gunna be a rad setup

[mynameisnotjeff]

I actually sold a palace board the other day which justified the Kenny Anderson skidul shape i bought this morning

Got some ace 44's and magnesium baseplates too and shit load of other stuff
I got to chill out decks are piling up

Have you had the magnesium baseplates on ice or just scooped them up?

[rocklobster]

I actually sold a palace board the other day which justified the Kenny Anderson skidul shape i bought this morning

Got some ace 44's and magnesium baseplates too and shit load of other stuff
I got to chill out decks are piling up

glances nervously at stack of 4 gripped boards and 5 ungripped board

[Nth syd bear]

Expand Quote

I actually sold a palace board the other day which justified the Kenny Anderson skidul shape i bought this morning

Got some ace 44's and magnesium baseplates too and shit load of other stuff
I got to chill out decks are piling up

[close]

Have you had the magnesium baseplates on ice or just scooped them up?

The Australian distro for ace had some

[Xen]

https://transformerrails.com/

8 footer coming my way

[jay_nev]

shop deck
conical fulls

[Ok]

https://transformerrails.com/

8 footer coming my way

Review please.

[Xen]

Expand Quote

https://transformerrails.com/

8 footer coming my way

[close]

Review please.

For sure!

In the meantime, for those that haven't checked the link, here's how it works.

[rocklobster]

Expand Quote

Expand Quote

https://transformerrails.com/

8 footer coming my way

[close]

Review please.

[close]

For sure!

In the meantime, for those that haven't checked the link, here's how it works.

Was thinking of grabbing one but it could cost me close to $500 just to get it shipped to Asia. There was a video which said the bolt which locks the rotating mechanism gets bent pretty easily, you may want to look at getting a replacement bolt.

[moonordie]

Ordered Rowan's shoe yesterday, they finally arrived in here.

[Xen]

Expand Quote

Expand Quote

Expand Quote

https://transformerrails.com/

8 footer coming my way

[close]

Review please.

[close]

For sure!

In the meantime, for those that haven't checked the link, here's how it works.

[close]

Was thinking of grabbing one but it could cost me close to $500 just to get it shipped to Asia. There was a video which said the bolt which locks the rotating mechanism gets bent pretty easily, you may want to look at getting a replacement bolt.

Oooof $500 just in shipping =(

Saw that video, I'm willing to take the risk =D

[IanBZHD]

Expand Quote

Expand Quote

Expand Quote

https://transformerrails.com/

8 footer coming my way

[close]

Review please.

[close]

For sure!

In the meantime, for those that haven't checked the link, here's how it works.

[close]

Was thinking of grabbing one but it could cost me close to $500 just to get it shipped to Asia. There was a video which said the bolt which locks the rotating mechanism gets bent pretty easily, you may want to look at getting a replacement bolt.

Honestly, if you go to any local fabrication/welding shop they will probably build you a rail or metal box for the right amount of money. A lot of Fab shops will do small commission work, or at least one of the welders could hook you up for a good price. $500 is a lot, but I completely understand the convenience of getting a transforming box/rail.
That's exactly what that company does, it looks like it's just a guy that knows how to weld and made some good contacts and a website.
I was going to contact some local plastics fabrication shops around my area to see if they have any scrap or cheap plastic sheets to make a butter bench.

[Xen]

^^ I'm in it for the trans-formative aspects, specifically the bench to flat bar.

I don't doubt a local shop could build one or the other but the cost goes up surely with all the design and intricacies of making such a thing.

I'll get my monies worth I think.

[Ok]

I don’t think you could get that made for much cheaper than $500 tbh.

I’m most curious to see how it holds up, and if it stays in place when skating it. Looks hella fun

[formula420]

For reference i got a 6 foot by 16 inch bar made at a fab shop for 80 bucks.

[rocklobster]

For reference i got a 6 foot by 16 inch bar made at a fab shop for 80 bucks.

Expand Quote

Expand Quote

Expand Quote

Expand Quote

https://transformerrails.com/

8 footer coming my way

[close]

Review please.

[close]

For sure!

In the meantime, for those that haven't checked the link, here's how it works.

[close]

Was thinking of grabbing one but it could cost me close to $500 just to get it shipped to Asia. There was a video which said the bolt which locks the rotating mechanism gets bent pretty easily, you may want to look at getting a replacement bolt.

[close]

Honestly, if you go to any local fabrication/welding shop they will probably build you a rail or metal box for the right amount of money. A lot of Fab shops will do small commission work, or at least one of the welders could hook you up for a good price. $500 is a lot, but I completely understand the convenience of getting a transforming box/rail.
That's exactly what that company does, it looks like it's just a guy that knows how to weld and made some good contacts and a website.
I was going to contact some local plastics fabrication shops around my area to see if they have any scrap or cheap plastic sheets to make a butter bench.

It's $550 including shipping plus I live in a tiny apartment with no garage or storage space. Space aside welding and building services are pricey in Singapore which is an island city. Welding is a cottage and dying industry since we import everything and raw materials cost a bomb here too.

[Gnarfunkell]

Decided to splurge a bit since I don't have much else to do.

Got my first Madness deck, which is gorgeous and feels really well made. I also got some thin rails for it too, but I'm going to wait a bit before putting them on.

Also got the 54mm 78A Ricta Clouds, plus a couple hats.

[411bandit]

Expand Quote

https://transformerrails.com/

8 footer coming my way

[close]

v


Review please.

Wow yeah please

[moonordie]

Just arrived 10 min ago


I love this shape

[TONYMONTANA.]

Mine tonight ok

[Xen]

For reference i got a 6 foot by 16 inch bar made at a fab shop for 80 bucks.

Does it transform into a bench?

Does it have multiple height adjustments?

Can you angle it?

Is both a round and flat bar?

If you got all that for $80 from a local, let us know who and where the shop is.

[Esmith5488]

Just arrived 10 min ago


I love this shape

What trucks you putting on that? Honestly I really want that shape

[moonordie]

Expand Quote

Just arrived 10 min ago


I love this shape

[close]

What trucks you putting on that? Honestly I really want that shape

6.1, I already have them on the same shape with conical fulls 53 and shit skates like a dream

[skatesum609]

Went crazy over the weekend! Got the workshop Fred gall reissue, 2 quasi Bobby de decks, both pairs of the dc x bronze Lukodas and both the t’s. Had a bunch of promo codes and a $60 credit for the dc store so it wasnt too bad! Will post pics when it all gets here if my wife doesn’t murder me first

[TwisT]

bought shit I didn't need.
I always try a bunch of wheels only the end up back on bones. currently riding wreck 83bs, which feel a little softer but are growing on me. Wasn't expecting to see these autobahn the shop so I grabbed them. I won't skate them for a while. New hardware cause my bolts were looking a little scruffy and mismatch

I don't know how your locals are doing, but this one claims to be doing alright in corona. Said his main problem is he can't keep the cheaper stuff in stock.

[augustmoon]

got another curb crusher.  this one is a different, skinnier (9.8 i think), more tapered shape.  and its dipped.  wanna skate it, but i think im gonna hang it on the wall for a bit. 

[jay_nev]

9” shop deck. Excited to try this size.
One of their locations was looted last Monday but they’ve handled it well.