Woodshop Directory 2019 Thread

[drewbearz]

Anyone skate the krooked fullshape decks?

I have an 8.38 sebo full shape and I wanted to like it so bad. I tried so hard but it sucks to flip and I skated like shit with it. I read that the full shape makes it easier to stay on the board but I didn't feel that at all. I did have shitty grip tape on it at the time though so perhaps I should give it another go.

[kneebone]

Expand Quote

Madness and New Deal need to be added underneath Dwindle (DSM)

[close]

New Deal is only dwindle for the re-issues. The "re-imagined" ones (old shapes/graphics remade to fit modern tastes) are PS stix. Some of them actually look kind of interesting, and according the professor he used uncommon molds for some of them that haven't really been used for production boards before.

I just got one of the New Deal "wtf" 8.75 Sun boards.  Love the shape, very similar to the AntiHero "full" shape Grosso I'm riding now.  Can also confirm it is PSStix.  Looking forward to set it up, been strictly riding BBS/generator for the past year or so after a poor experience with a PS Quasi.  Hopefully this one is better.

[Roisto]

Anyone skate the krooked fullshape decks?

I have an 8.38 sebo full shape and I wanted to like it so bad. I tried so hard but it sucks to flip and I skated like shit with it. I read that the full shape makes it easier to stay on the board but I didn't feel that at all. I did have shitty grip tape on it at the time though so perhaps I should give it another go.

The 8.38" full has a longer wheelbase than most decks and has a shortish tail. Bit of a weird shape really but I really liked mine. Takes some times to get used to for sure though.

[palelight]

Expand Quote

Anyone skate the krooked fullshape decks?

I have an 8.38 sebo full shape and I wanted to like it so bad. I tried so hard but it sucks to flip and I skated like shit with it. I read that the full shape makes it easier to stay on the board but I didn't feel that at all. I did have shitty grip tape on it at the time though so perhaps I should give it another go.

[close]

The 8.38" full has a longer wheelbase than most decks and has a shortish tail. Bit of a weird shape really but I really liked mine. Takes some times to get used to for sure though.

If you're looking for the 8.38 with a square-ish shape without the massive WB, check out the Krooked Manderson 8.38's. Same concept with a 14.25wb (and 32" overall).

[Woos]

Expand Quote

Expand Quote

Anyone skate the krooked fullshape decks?

I have an 8.38 sebo full shape and I wanted to like it so bad. I tried so hard but it sucks to flip and I skated like shit with it. I read that the full shape makes it easier to stay on the board but I didn't feel that at all. I did have shitty grip tape on it at the time though so perhaps I should give it another go.

[close]

The 8.38" full has a longer wheelbase than most decks and has a shortish tail. Bit of a weird shape really but I really liked mine. Takes some times to get used to for sure though.

[close]

If you're looking for the 8.38 with a square-ish shape without the massive WB, check out the Krooked Manderson 8.38's. Same concept with a 14.25wb (and 32" overall).

The DLX Full SEs are awesome if you want a BBS deck with a 14.25WB and square/full shape.  I wish Quasi would switch to BBS though.

[palelight]

Expand Quote

Expand Quote

Expand Quote

Anyone skate the krooked fullshape decks?

I have an 8.38 sebo full shape and I wanted to like it so bad. I tried so hard but it sucks to flip and I skated like shit with it. I read that the full shape makes it easier to stay on the board but I didn't feel that at all. I did have shitty grip tape on it at the time though so perhaps I should give it another go.

[close]

The 8.38" full has a longer wheelbase than most decks and has a shortish tail. Bit of a weird shape really but I really liked mine. Takes some times to get used to for sure though.

[close]

If you're looking for the 8.38 with a square-ish shape without the massive WB, check out the Krooked Manderson 8.38's. Same concept with a 14.25wb (and 32" overall).

[close]

The DLX Full SEs are awesome if you want a BBS deck with a 14.25WB and square/full shape.  I wish Quasi would switch to BBS though.

Doesn't the SE still have a 14.4" wheelbase? (at least on the 8.38's I think). Never had the full 8.38, but when i compared an older 8.5 full I had lying around to the Manderson 8.38 (Bomb graphic) the nose and tail were a lot more square than the standard full.

[Woos]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Anyone skate the krooked fullshape decks?

I have an 8.38 sebo full shape and I wanted to like it so bad. I tried so hard but it sucks to flip and I skated like shit with it. I read that the full shape makes it easier to stay on the board but I didn't feel that at all. I did have shitty grip tape on it at the time though so perhaps I should give it another go.

[close]

The 8.38" full has a longer wheelbase than most decks and has a shortish tail. Bit of a weird shape really but I really liked mine. Takes some times to get used to for sure though.

[close]

If you're looking for the 8.38 with a square-ish shape without the massive WB, check out the Krooked Manderson 8.38's. Same concept with a 14.25wb (and 32" overall).

[close]

The DLX Full SEs are awesome if you want a BBS deck with a 14.25WB and square/full shape.  I wish Quasi would switch to BBS though.

[close]

Doesn't the SE still have a 14.4" wheelbase? (at least on the 8.38's I think). Never had the full 8.38, but when i compared an older 8.5 full I had lying around to the Manderson 8.38 (Bomb graphic) the nose and tail were a lot more square than the standard full.

Oh shit I read that wrong and didn't realize it had to be 8.38.  The 8.25 is a 14.25 WB, my bad.  Going from 8.38 to 8.25 should be easy enough to do though... I find changing WB is harder than width personally.  I just went from 8.125 to 8.0 on my tech/flatground setup because Quasi's 8s have a longer wheelbase and length than their 8.125s.  My bad, I jumped on the reply button because 8.25 DLX Full SEs are one of my go to shapes.

[palelight]

Expand Quote

Doesn't the SE still have a 14.4" wheelbase? (at least on the 8.38's I think). Never had the full 8.38, but when i compared an older 8.5 full I had lying around to the Manderson 8.38 (Bomb graphic) the nose and tail were a lot more square than the standard full.

[close]

Oh shit I read that wrong and didn't realize it had to be 8.38.  The 8.25 is a 14.25 WB, my bad.  Going from 8.38 to 8.25 should be easy enough to do though... I find changing WB is harder than width personally.  I just went from 8.125 to 8.0 on my tech/flatground setup because Quasi's 8s have a longer wheelbase and length than their 8.125s.  My bad, I jumped on the reply button because 8.25 DLX Full SEs are one of my go to shapes.

No worries. And agreed about the width vs. wb, which is why I really dug the Manderson shape when they released it. Ticks a lot of boxes for me, the full nose, standard wheelbase, and BBS wood. No complaints.

[Woos]

Expand Quote

Expand Quote

Doesn't the SE still have a 14.4" wheelbase? (at least on the 8.38's I think). Never had the full 8.38, but when i compared an older 8.5 full I had lying around to the Manderson 8.38 (Bomb graphic) the nose and tail were a lot more square than the standard full.

[close]

Oh shit I read that wrong and didn't realize it had to be 8.38.  The 8.25 is a 14.25 WB, my bad.  Going from 8.38 to 8.25 should be easy enough to do though... I find changing WB is harder than width personally.  I just went from 8.125 to 8.0 on my tech/flatground setup because Quasi's 8s have a longer wheelbase and length than their 8.125s.  My bad, I jumped on the reply button because 8.25 DLX Full SEs are one of my go to shapes.

[close]

No worries. And agreed about the width vs. wb, which is why I really dug the Manderson shape when they released it. Ticks a lot of boxes for me, the full nose, standard wheelbase, and BBS wood. No complaints.

I might have to give that shap a try.  Thanks!

[FrozenIndustries]

Anyone know who presses Sausage? Got one recently and it looks kind of like a South Central.

[j....soy.....]

Could be....I always thought they were pressing their own stuff in some woodshop in pac-northwest.

[bony bawk]

maybe more directed to people in Oz but does anyone know where Private Joy presses their decks? same as passport?

[Kneesles]

Anyone know who presses Sausage? Got one recently and it looks kind of like a South Central.

I just picked up a couple 8.25" sausage decks and one is mellow kicks and concave from Canada and the other has medium kicks
and concave with 7k stamped in the middle of the front truck on the top sheet and is also imported so im guessing from mexico
 (Clutch possibly). It is a similar stamp to the Syndrome Dist boards from a few years ago, whoever was pressing those.

[FrozenIndustries]

Expand Quote

Anyone know who presses Sausage? Got one recently and it looks kind of like a South Central.

[close]

I just picked up a couple 8.25" sausage decks and one is mellow kicks and concave from Canada and the other has medium kicks
and concave with 7k stamped in the middle of the front truck on the top sheet and is also imported so im guessing from mexico
 (Clutch possibly). It is a similar stamp to the Syndrome Dist boards from a few years ago, whoever was pressing those.

Wild, I guess they're using a few shops. The 7k or k7 sounds like clutch for sure. I kind of want to DM them.

On this one only top ply mark was a dot over the front truck, no sticker on the shrink or anywhere to indicate origin. I was thinking South Central because of how thick and flat it is. Holding up next to a DOA flat they look like they could be from the same spot.

[palelight]

Expand Quote

Expand Quote

Anyone know who presses Sausage? Got one recently and it looks kind of like a South Central.

[close]

I just picked up a couple 8.25" sausage decks and one is mellow kicks and concave from Canada and the other has medium kicks
and concave with 7k stamped in the middle of the front truck on the top sheet and is also imported so im guessing from mexico
 (Clutch possibly). It is a similar stamp to the Syndrome Dist boards from a few years ago, whoever was pressing those.

[close]

Wild, I guess they're using a few shops. The 7k or k7 sounds like clutch for sure. I kind of want to DM them.

On this one only top ply mark was a dot over the front truck, no sticker on the shrink or anywhere to indicate origin. I was thinking South Central because of how thick and flat it is. Holding up next to a DOA flat they look like they could be from the same spot.

Every South Central deck I've bought (DOA, Politic, Vacation, Bacon, Morning Bell) have had "Made in USA" on them. The owner of South Central gives pretty good price breaks for stating that. Also, they all had plain white round stickers indicating the size on the shrink wrap. And with the DOA flat they also have it labelled "E mold." Definitely worth sending them a DM, I've yet to get any flack for asking about woodshops when I nerd out. 

[whatsreallygood]

Expand Quote

Expand Quote

Decided to venture off from BBS wood and set up a Crailtap deck (Chocolate) 2 weeks ago. Shit is pressure cracking like a mofo behind both trucks, and everytime I landed bolts today I could hear wood crackiling so now I'm paranoid that the next time I land bolts this deck is dead. I was actually digging the wood too..oh well, back to BBS.

[close]

Damn, I was curious if they'd improved much but that's a bummer

[close]

They've improved significantly. Wood no longer feels soft as shit after a week or two, and tail doesn't chip and give out after 3-4 weeks like the old wood did. The decks do pressure crack absurdly fast, but it has no impact on deck performance.

Ben Degros' video is accurate to my personal experience with Girl/Chocolate decks.

Ah ok, fair. If I end up seeing one and the shape clicks I'll give it a shot, appreciate the info.

[Esmith5488]

Expand Quote

Expand Quote

Expand Quote

Decided to venture off from BBS wood and set up a Crailtap deck (Chocolate) 2 weeks ago. Shit is pressure cracking like a mofo behind both trucks, and everytime I landed bolts today I could hear wood crackiling so now I'm paranoid that the next time I land bolts this deck is dead. I was actually digging the wood too..oh well, back to BBS.

[close]

Damn, I was curious if they'd improved much but that's a bummer

[close]

They've improved significantly. Wood no longer feels soft as shit after a week or two, and tail doesn't chip and give out after 3-4 weeks like the old wood did. The decks do pressure crack absurdly fast, but it has no impact on deck performance.

Ben Degros' video is accurate to my personal experience with Girl/Chocolate decks.

[close]

Ah ok, fair. If I end up seeing one and the shape clicks I'll give it a shot, appreciate the info.

Shapes and good and the wood is better, I probably had over a year on nothing but crailtap boards once they fixed the wood because they shapes are really good for me

[myfeetarekillingme]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Decided to venture off from BBS wood and set up a Crailtap deck (Chocolate) 2 weeks ago. Shit is pressure cracking like a mofo behind both trucks, and everytime I landed bolts today I could hear wood crackiling so now I'm paranoid that the next time I land bolts this deck is dead. I was actually digging the wood too..oh well, back to BBS.

[close]

Damn, I was curious if they'd improved much but that's a bummer

[close]

They've improved significantly. Wood no longer feels soft as shit after a week or two, and tail doesn't chip and give out after 3-4 weeks like the old wood did. The decks do pressure crack absurdly fast, but it has no impact on deck performance.

Ben Degros' video is accurate to my personal experience with Girl/Chocolate decks.

[close]

Ah ok, fair. If I end up seeing one and the shape clicks I'll give it a shot, appreciate the info.

[close]

Shapes and good and the wood is better, I probably had over a year on nothing but crailtap boards once they fixed the wood because they shapes are really good for me

I, a grown man, tried to focus an old Chocolate deck last night and failed 3 times so I definitely think there's something to be said. If you can get past the pressure crack weirdness they seem really solid and the shapes are consistently good.

[Sundaynuggets]

Expand Quote

Expand Quote

Expand Quote

Anyone know who presses Sausage? Got one recently and it looks kind of like a South Central.

[close]

I just picked up a couple 8.25" sausage decks and one is mellow kicks and concave from Canada and the other has medium kicks
and concave with 7k stamped in the middle of the front truck on the top sheet and is also imported so im guessing from mexico
 (Clutch possibly). It is a similar stamp to the Syndrome Dist boards from a few years ago, whoever was pressing those.

[close]

Wild, I guess they're using a few shops. The 7k or k7 sounds like clutch for sure. I kind of want to DM them.

On this one only top ply mark was a dot over the front truck, no sticker on the shrink or anywhere to indicate origin. I was thinking South Central because of how thick and flat it is. Holding up next to a DOA flat they look like they could be from the same spot.

[close]

Every South Central deck I've bought (DOA, Politic, Vacation, Bacon, Morning Bell) have had "Made in USA" on them. The owner of South Central gives pretty good price breaks for stating that. Also, they all had plain white round stickers indicating the size on the shrink wrap. And with the DOA flat they also have it labelled "E mold." Definitely worth sending them a DM, I've yet to get any flack for asking about woodshops when I nerd out.

Do you mean South central gives you a price break if you order s batch of decks from them with “made in usa” on it? I’m going to use them for my next batch of decks so I’m curious

[myfeetarekillingme]

Does anyone happen to know the full measurements for Politic and DOA's 8.125s and 8.25s? I refuse to order a board online without knowing the length and wb...

[FrozenIndustries]

Does anyone happen to know the full measurements for Politic and DOA's 8.125s and 8.25s? I refuse to order a board online without knowing the length and wb...

My DOA 8.25"s have all been 14.25WB and about 31.75 overall.

[palelight]

Do you mean South central gives you a price break if you order s batch of decks from them with “made in usa” on it? I’m going to use them for my next batch of decks so I’m curious

Trying to find where the hell I read this, but it was recently. Might be worth it to email the owner and confirm as I'm now worried I'm talking out of my ass.

Does anyone happen to know the full measurements for Politic and DOA's 8.125s and 8.25s? I refuse to order a board online without knowing the length and wb...

If you message Steve at DOA he'll let you know. Got back to me in like an hour about all my wheelbase nerd-ery.

[Sundaynuggets]

Expand Quote

Do you mean South central gives you a price break if you order s batch of decks from them with “made in usa” on it? I’m going to use them for my next batch of decks so I’m curious

[close]

Trying to find where the hell I read this, but it was recently. Might be worth it to email the owner and confirm as I'm now worried I'm talking out of my ass.

Expand Quote

Does anyone happen to know the full measurements for Politic and DOA's 8.125s and 8.25s? I refuse to order a board online without knowing the length and wb...

[close]

If you message Steve at DOA he'll let you know. Got back to me in like an hour about all my wheelbase nerd-ery.

Gotcha, I’ll check, thank you!

[Woos]

So does Skull Skates make all of their own boards or what exactly?  I've been thinking about throwing a cruiser together and I'm looking at their BA. KU. collabs and the Heroin DMODW Raven.  Not sure what one would be better quality.

[backinaction]

So does Skull Skates make all of their own boards or what exactly?  I've been thinking about throwing a cruiser together and I'm looking at their BA. KU. collabs and the Heroin DMODW Raven.  Not sure what one would be better quality.

I saw a video a few months back where they said they were made at a woodshop in Canada and how that made them better because the wood - which is grown there - didn't have to be shipped all over.  They were pretty proud that their shop decks weren't the cheaper decks that they carried, and that people were willing to pay more than average for them.

[pointandclick]

So does Skull Skates make all of their own boards or what exactly?  I've been thinking about throwing a cruiser together and I'm looking at their BA. KU. collabs and the Heroin DMODW Raven.  Not sure what one would be better quality.

skull skates are made at control, which to me are reserved to be shop boards. they are cheap, dont keep their shape and sog out.

[Woos]

Expand Quote

So does Skull Skates make all of their own boards or what exactly?  I've been thinking about throwing a cruiser together and I'm looking at their BA. KU. collabs and the Heroin DMODW Raven.  Not sure what one would be better quality.

[close]

skull skates are made at control, which to me are reserved to be shop boards. they are cheap, dont keep their shape and sog out.

Damn.  If I'm buying a board for cruising I want it to last as long as possible because I'm not going to ride it very hard or even that often.  I sort of figured playing it safe with BBS would be the best option but those BA. KU. graphics are sick.  I'm a sucker for that TRVE KVLT shit.

[pointandclick]

Expand Quote

Expand Quote

So does Skull Skates make all of their own boards or what exactly?  I've been thinking about throwing a cruiser together and I'm looking at their BA. KU. collabs and the Heroin DMODW Raven.  Not sure what one would be better quality.

[close]

skull skates are made at control, which to me are reserved to be shop boards. they are cheap, dont keep their shape and sog out.

[close]

Damn.  If I'm buying a board for cruising I want it to last as long as possible because I'm not going to ride it very hard or even that often.  I sort of figured playing it safe with BBS would be the best option but those BA. KU. graphics are sick.  I'm a sucker for that TRVE KVLT shit.

heroin boards are solid bbs wood, should treat you well.

[palelight]

Expand Quote

Expand Quote

So does Skull Skates make all of their own boards or what exactly?  I've been thinking about throwing a cruiser together and I'm looking at their BA. KU. collabs and the Heroin DMODW Raven.  Not sure what one would be better quality.

[close]

skull skates are made at control, which to me are reserved to be shop boards. they are cheap, dont keep their shape and sog out.

[close]

Damn.  If I'm buying a board for cruising I want it to last as long as possible because I'm not going to ride it very hard or even that often.  I sort of figured playing it safe with BBS would be the best option but those BA. KU. graphics are sick.  I'm a sucker for that TRVE KVLT shit.

Though not specifically first wave black metal inspired, Brujeria always has some good heavy graphics, and the owner posts here from time to time,
https://www.brujariaskateboards.com/shop-1

Edit: Thought they were BBS, but they're last listed as using Clutch, which I've never skated.

[j....soy.....]

I think for a cruiser, the skull board will suit you fine.  They do it because they want to keep it Canadian.