The Set-up Thread

[dr.prestige]

Expand Quote

3 months in running this shape and I'm sold on not changing anything as long as I don't have to...

• Krooked Sweatpants 9.81"x32" w/ 14.37" wb
• Ace AF1 Hollow 66's (Ace 91a top bushings as tops/bottoms)
• Ace AF1 7/8" Hollow Allen
• Bones Swiss
• Spitfire F4 Classic 99a 55's

[close]

Will that shape work with Indy 144s? [/list]

Sure but they're much narrower than the width of the board at either truck location so if you're ok with magic carpeting then yeah but if not I would go for an indy 159 or 169 (~8.75"-9") those fit the board much better. I'm riding 169s with this shape right now and the back truck sticks out just a teeny bit.

[SorryReallySorryDVD]

It took me about 10 tries to get the grip lined up just right over the top graphic. Worth it.



Heated Wheel 8.5
Ace 44 classics with 2 year old AF1 bushings
54mm Loophole Brian Powderly
Reds
Jessup
5 year old Shorty's
Earthtone sticker

Lakai Atlantics

[Uncle Flea]

Reset the set up.

Traffic Orchard
Ventures cast 5.6
Found these mixed baseplates a few years ago. Kept um on ice now I'm stoked AF. I have like 4 extra sets of plates lol.

I'm on some old 101a 55mm classics. They are about 51s maybe 52s.

I definitely miss being on the 8.75 with the 5.8 and the 58mm ogs.

It's all good.

Probably like July or August I'll step up to 6.1s. the 5.8 was so good. Probably the  best truck ive ever had in my life.

I fully believe the 6.1 is going to be even better.

I tried switching to the indys but I just couldn't do it rn. The same for the slappy. The slappy trucks are on my cruiser rn. That shit is scary fast.

Maybe I'll post later. Has some rare ass shit on it.

[Samsquantch]

9" Anti-Hero orange eagle with kook-ish scratches
66 Ace AF1 Hollow with hard bushings
Indy risers
56mm Spitfire f4 Conical full
Mosaic Madars Apse bearings
Mob

8.75" BBS blank (Anti-Hero white eagle)
Ace AF1 55 stock
Indy risers
55mm OJ super juice mini
Mini logo bearings
Mob

Blazer GT's

Old guy getting back into it. I'm 6'5" 210 with size 14's. Basically Brian Anderson except completely unskilled.

Love the ace's with the hard bushings. Tried Indy's too, also liked them. Would be happy on either. Ace nuts are dogshit.

Full madness I've tried Dragons, X97's, and the F4's. Probably like the Dragons least, X97's are almost as good on crust, but don't feel as rubbery and slow in the park. F4's just feel perfect, they feel and sound like I think skateboard wheels should. Yeah, both Bones are better on crust but... I dunno, still like the spits better.

Other setup I put together for my wife, but I ride it way more. The super juices are a fucking riot and everyone should try them, they just mob through everything. So fun. No slide and heavy, but for mobbing around the neighborhood they're amazing.

[big_kev_215]

Hopps 8.0”
Venture 5.2 low
Spitfire 52mm F4 classics
Swiss
Mob
New Balance Poets 1010s

[zozu]

Current mood:


I realize @Xen posted something very similar one page back.

Zero 8.25, Jessup
Royal IKP 149
Thunder Risers
Spitfire Geering Conical 55mm
Mini Logo bearings
Janoskis

Also bonus fun setup I just bought trucks for:


Blind Tim Gavin reissue 8.125 slick egg (like 7.75 at the trucks)
Venture V-hollow 5.2
Random risers from a Kmart complete
Spitfire Ishod  55mm classics
MMini Logo Bearings 

[moonordie]

Current mood:


I realize @Xen posted something very similar one page back.

Zero 8.25, Jessup
Royal IKP 149
Thunder Risers
Spitfire Geering Conical 55mm
Mini Logo bearings
Janoskis

Also bonus fun setup I just bought trucks for:


Blind Tim Gavin reissue 8.125 slick egg (like 7.75 at the trucks)
Venture V-hollow 5.2
Random risers from a Kmart complete
Spitfire Ishod  55mm classics
MMini Logo Bearings

I'm surprised that your trucks are not black too, that would be kinda dope

[Mcidraque]

Great looking set-up, would love to see a closer pic of that bushing combo you're running. Sounds interesting

cheers!

3 months in running this shape and I'm sold on not changing anything as long as I don't have to...

• Krooked Sweatpants 9.81"x32" w/ 14.37" wb
• Ace AF1 Hollow 66's (Ace 91a top bushings as tops/bottoms)

[eSK3]

Hopps 8.0”
Venture 5.2 low
Spitfire 52mm F4 classics
Swiss
Mob
New Balance Poets 1010s

Most aesthetically pleasing set up on this page.

[Ok]

Expand Quote

[close]

Expand Quote

Hopps 8.0”
Venture 5.2 low
Spitfire 52mm F4 classics
Swiss
Mob
New Balance Poets 1010s

[close]

Most aesthetically pleasing set up on this page.

i’m am experiencing the pangs of envy

[TheLowerBack]

3 months in running this shape and I'm sold on not changing anything as long as I don't have to...

• Krooked Sweatpants 9.81"x32" w/ 14.37" wb
• Ace AF1 Hollow 66's (Ace 91a top bushings as tops/bottoms)
• Ace AF1 7/8" Hollow Allen
• Bones Swiss
• Spitfire F4 Classic 99a 55's

Good lookin whip, good lookin feebs[/list]

[Xen]

Current mood:


I realize @Xen posted something very similar one page back.

Zero 8.25, Jessup
Royal IKP 149
Thunder Risers
Spitfire Geering Conical 55mm
Mini Logo bearings
Janoskis

Also bonus fun setup I just bought trucks for:


Blind Tim Gavin reissue 8.125 slick egg (like 7.75 at the trucks)
Venture V-hollow 5.2
Random risers from a Kmart complete
Spitfire Ishod  55mm classics
MMini Logo Bearings 

@zozu

Sick!

I had initially setup my zero with black spit conicals! I'm switching off the zero, damn thing just feels soggy/dead =( really weird seeing as it's BBS.

[big_kev_215]

Expand Quote

Expand Quote

[close]

Expand Quote

Hopps 8.0”
Venture 5.2 low
Spitfire 52mm F4 classics
Swiss
Mob
New Balance Poets 1010s

[close]

Most aesthetically pleasing set up on this page.

[close]

i’m am experiencing the pangs of envy

Thanks fellow Slap users.  I skated it today and enjoyed the setup.  Large nose and tail

[Uncle Flea]

Great looking set-up, would love to see a closer pic of that bushing combo you're running. Sounds interesting

cheers!

Expand Quote

3 months in running this shape and I'm sold on not changing anything as long as I don't have to...

• Krooked Sweatpants 9.81"x32" w/ 14.37" wb
• Ace AF1 Hollow 66's (Ace 91a top bushings as tops/bottoms)

[close]

That shits beautiful. Gonz and roses in sliver is sick

[Uncle Flea]

Expand Quote

Expand Quote

[close]

Expand Quote

Hopps 8.0”
Venture 5.2 low
Spitfire 52mm F4 classics
Swiss
Mob
New Balance Poets 1010s

[close]

Most aesthetically pleasing set up on this page.

[close]

i’m am experiencing the pangs of envy

It is an excellent set up. If I wasn't angling for some 6.1s I'd definitely cop some 5.2s

[TheCrimsonShroud]

Probably like July or August I'll step up to 6.1s. the 5.8 was so good. Probably the  best truck ive ever had in my life.

I hated my 5.8 hi’s for a period but they’re like the most comfy, predictable trucks I’ve ever skated now that I changed the bushings and took some time with them. I haven’t bought any trucks for the 9.25 shaped deck I have coming and you just reminded me it’s because I want 6.1s on it.

[ridethegutter]

8.6 creature stumps
8.5 thunder hollow lights
53mm spitfire ishods

[Murge]

8.6 creature stumps
8.5 thunder hollow lights
53mm spitfire ishods

I had the 8.8 stumps and really enjoyed it.

[zozu]

Expand Quote

Current mood:

[close]

I'm surprised that your trucks are not black too, that would be kinda dope

Dont have any but now I'm tempted to bust out the spraypaint...

Expand Quote

I realize @Xen posted something very similar one page back.

[close]

@zozu

Sick!

I had initially setup my zero with black spit conicals! I'm switching off the zero, damn thing just feels soggy/dead =( really weird seeing as it's BBS.

Haha that would have been sick, was gonna run some natural conical fulls but the black wheels just had to go on.
Shame it was feeling soggy, that must have got in my head a lil bit cause I'm questioning my own setup now 

[GauchoAmigo]

Paccbet 8.5 14.5wb for the short kings out there
Ace af1 55(bushings blew out super quick on them)
Dlxsf 1/8” wooden risers
F4 og classics 99du 54mm
Bronson g2 bearings

I'm short / average height and I've always preferred short wheelbases, I thought taller you were = more likely to prefer longer wheelbase and vice versa

[roba]

shop board i designed, 8.375 x 31.875 x 14.25
venture standard 5.8 with 90a supercush and flat top washer
spitfire f4 radial 56 99, worn down to 52ish
skf bearings
jessup
pig bolts
skate half cabs, but i cut out the tongue straps so that the tongue goes over my pant cuffs

the manufacturer fucked up and they didn’t put the hole in the letter „D” so i cut a white sticker and put it there, it’s not identical to the original graphic i made but it works, kinda.

the shop is called „śledź” which means „herring” but i didn’t put the accents on there because it didn’t fit the graphic, the wheelbite marks could work as the accents lol

[sbr]

Great looking set-up, would love to see a closer pic of that bushing combo you're running. Sounds interesting

cheers!

Nothing too wild about it, just duel stock AF1 tops. I'm waiting for a homie that works at Mesa to send me a set of Ace Classic top bushings to run as bottoms without the washers. The Classic bushings have a slightly different shape to them and are a little stiffer since they compress less so I figured I'd give the full Ronbo bushing setup a go hahaha

bushings by Sean Brian Rosner, on Flickr

Good lookin whip, good lookin feebs

Thanks!

That shits beautiful. Gonz and roses in sliver is sick

I'm digging this one, but I haven't seen a graphic on this shape that I've been on the fence about. The only one I would hesitate to skate was the ltd. moon smile one, but that's only because I have an aversion to skating dipped boards.

[MOE SYZLAK]

Ramp’s almost done, Birthday is coming up.
It was hard to let the Chico Krooked go, but it was time for a new mini ramp rig.

CK loveseat
Thunder 149s
56mm spit conical full 101
Quantum metallics
Bender Allen
Krooked risers
Jessup ultra
Should be fun…

[TastyBurrito]

Heroin Razor Edge Egg 9.5”X14.25WB
Ace 66 Classic
Bones Dragon 54mm
Bronson Raw

[shpongle]

Ramp’s almost done, Birthday is coming up.
It was hard to let the Chico Krooked go, but it was time for a new mini ramp rig.

CK loveseat
Thunder 149s
56mm spit conical full 101
Quantum metallics
Bender Allen
Krooked risers
Jessup ultra
Should be fun…

Sick setup. How do you like thunders? I been thinking of trying them. I heard wheelbite is crazy. Im running 55mm wheels, do you think i need risers?

[MOE SYZLAK]

Expand Quote

Ramp’s almost done, Birthday is coming up.
It was hard to let the Chico Krooked go, but it was time for a new mini ramp rig.

CK loveseat
Thunder 149s
56mm spit conical full 101
Quantum metallics
Bender Allen
Krooked risers
Jessup ultra
Should be fun…

[close]

Sick setup. How do you like thunders? I been thinking of trying them. I heard wheelbite is crazy. Im running 55mm wheels, do you think i need risers?

I like thunders in general. I usually recommend a riser with any wheels over 54mm (but I like loose trucks and really high setups for ramps / cruisers so I fuck with risers)

[Tom Pearl]

8.0 workshop
5.2 venture lo (one white venture lo hanger cause i broke a kingpin)
52 f4 classics
bones swiss
bronze allen
jessup

[TheLowerBack]

Heroin Razor Edge Egg 9.5”X14.25WB
Ace 66 Classic
Bones Dragon 54mm
Bronson Raw

So is the top not routed at all? How's that feel on the shins?

[TastyBurrito]

Expand Quote

Heroin Razor Edge Egg 9.5”X14.25WB
Ace 66 Classic
Bones Dragon 54mm
Bronson Raw

[close]

So is the top not routed at all? How's that feel on the shins?

I haven’t shinned or primo’d…yet.

[TheLowerBack]

Expand Quote

Expand Quote

Heroin Razor Edge Egg 9.5”X14.25WB
Ace 66 Classic
Bones Dragon 54mm
Bronson Raw

[close]

So is the top not routed at all? How's that feel on the shins?

[close]

I haven’t shinned or primo’d…yet.

Good luck and god speed.
I've been curious about these, but haven't seen one in person. Fun lookin' set up fur shur.