The Set-up Thread

[animalflesh]

Damn you really had to flex with the second pair of slippers like that

[Paperclip20]

FA 8.25     14 1/8th in WB
Thunder 149 Team Hollows
Spitfire burners
Spitfire F4 Classics

[Paperclip20]

Put together a second setup with different stuff that I'm used to.
Robot 8.375 (BBS)
Krux Nora 8.5, took the paint out to make them raw.
Shake Junt triple OG
F4 Radial slims 53mm 101

That's a really neat looking setup, have you skated krux before?

[moonordie]

Expand Quote

Put together a second setup with different stuff that I'm used to.
Robot 8.375 (BBS)
Krux Nora 8.5, took the paint out to make them raw.
Shake Junt triple OG
F4 Radial slims 53mm 101

[close]

That's a really neat looking setup, have you skated krux before?

Never, always wanted because of Cairo, Caswell and Nestor.

[moonordie]

Damn you really had to flex with the second pair of slippers like that

Those are my fiancee ones + other pair for people who comes visit. I got used from Czech republic to never use shoes indoors. Is pretty neat.

[Complements4U]

Ace 44 are really nice. I also skate boards 8.125-8.5 I used to always use the 5.5 tensor 10s cause an 8.375 axle is perfect for that range.

[harshrealm]

AH Brown Bomber
Indy Hollow 149
F4 Classics 53mm 99a

[Gray Imp Sausage Metal]

AH Brown Bomber
Indy Hollow 149
F4 Classics 53mm 99a

need a top pic🤞

[harshrealm]

Expand Quote

AH Brown Bomber
Indy Hollow 149
F4 Classics 53mm 99a

[close]

need a top pic🤞

Top pic for you. Roman numeral I stamp on this one.

[FrozenIndustries]

Love that shape, been contemplating pulling the trigger on that one quite a bit. Nice to see that 149s/44s would look good on it.

[alright]

Expand Quote

Expand Quote

Put together a second setup with different stuff that I'm used to.
Robot 8.375 (BBS)
Krux Nora 8.5, took the paint out to make them raw.
Shake Junt triple OG
F4 Radial slims 53mm 101

[close]

That's a really neat looking setup, have you skated krux before?

[close]

Never, always wanted because of Cairo, Caswell and Nestor.

How are you liking krux's? Do they seem alright? I'm always weary of trying any trucks nowadays that aren't thunders, indys, or ventures.

[moonordie]

Expand Quote

Expand Quote

Expand Quote

Put together a second setup with different stuff that I'm used to.
Robot 8.375 (BBS)
Krux Nora 8.5, took the paint out to make them raw.
Shake Junt triple OG
F4 Radial slims 53mm 101

[close]

That's a really neat looking setup, have you skated krux before?

[close]

Never, always wanted because of Cairo, Caswell and Nestor.

[close]

How are you liking krux's? Do they seem alright? I'm always weary of trying any trucks nowadays that aren't thunders, indys, or ventures.

I just came back from skating. Sure they grind different than Indy's, I like it more but the turn is not that good, is ok tho. Glad that I gave them a try

[harshrealm]

Love that shape, been contemplating pulling the trigger on that one quite a bit. Nice to see that 149s/44s would look good on it.

It could definitely be setup with 159s, but I like the 149s on it. It’s pretty much right at 8.5 at the back trucks and just slightly wider at the front.

[Sativa Lung]

Love that shape, been contemplating pulling the trigger on that one quite a bit. Nice to see that 149s/44s would look good on it.

Not sure what the length/wb is on that board but if you want something similar check out the Austin Kanfoush "yinzer" (a few sites have it misspelled as yanzer for some reason) shape. It's quite similar but with a square tail. Measurements are 8.55x31.62 with a 14.12 wb. Here's a Pic of one

[Painted Baby]

Yinzer is my favorite shape right now but it's not that easy to come by. As far as I know, they've only done 2 drops for it so far which were at least a few seasons apart and it didn't seem like they made that many, at least for the second one. Wish it was more in the regular rotation. I love that kind of tail and it's cool to get on something 8.5ish.

[ChuckRamone]

First time posting in here

Theories Rasputin 8.25" x 32", 14.25 WB
144 Reynolds Indys
56mm F4s
Reds
Jessup
Hopps 1" hardware

State Pacificas

[Gray Imp Sausage Metal]

Expand Quote

Expand Quote

AH Brown Bomber
Indy Hollow 149
F4 Classics 53mm 99a

[close]

need a top pic🤞

[close]

Top pic for you. Roman numeral I stamp on this one.

Thanks, looks like a tonnne of fun, also looking at black widow cuz it has an even shorter wheelbase but the brown stain on the bomber just looks so cool

[jay_nev]

All the AH eagles look great

[Nth syd bear]

Expand Quote

Love that shape, been contemplating pulling the trigger on that one quite a bit. Nice to see that 149s/44s would look good on it.

[close]

Not sure what the length/wb is on that board but if you want something similar check out the Austin Kanfoush "yinzer" (a few sites have it misspelled as yanzer for some reason) shape. It's quite similar but with a square tail. Measurements are 8.55x31.62 with a 14.12 wb. Here's a Pic of one

That board is backwards hehehe

[Roisto]

Real 8.38"
Ace 44s with mag plates and new pivot cups (again)
Spitfire Formula Four Radial Slims 54mm 101A
Zealous bearings with built in spacers
Pig rails
Thunder bolts
Some grip (not MOB)

Changed everything except the metal parts and top and bottom bushings in the trucks. Deck and wheel combo was looking so green that I had to put on bearings with green shields on as I had a set around. Also the rails I put on just cuz I had a green set around. Grip I kinda botched but it'll do for now.

Previous board was all warped and worn out already, an Ishod 8.5" twin tail. Had a nice curb session with this before the winter makes those impossible for several months and really enjoyed it. Radial Slims hot dog a bunch on Ace 44s. Probably gonna throw a few extra washers on the inside to make it look a bit better. Also my last set of 101s. After that I'm going fully to 99s and don't plan on coming back.

[munchbox]

my almost perfect setup
Antihero Eagle 9.0 15 wheelbase and near twin nose
Thunder 149 Hollow Lights that will be sized up to 151/159 after payday
Spitfire F4 Radial Slims that were 52s around 50mm now
Bones Reds
Bones Hardcore bushings
Krooked 1/8 risers
Shop hardware
Free Mob from the shop and will be switching back to Jessup

[fulfillthedream]

got my board stolen for the first time ever so got a new setup;

First time riding a DGK and its not too bad, The shop didn;t have any other 8.25s so I got this one
148 Thunder hi with the red 97a bushings
52mm F4's 99a
Bones reds
allen hardware

[rocklobster]

No idea how all of you ride such big setups, ridden a 8.06 for a while and 8.125 for 1 session and that felt too wide and large for me. But I'm still tempted to try a 8.25 Ishod Full SE I found at the shop. Either that or a Low Pro II, 7.75 boards just aren't working for me anymore.

[Shuh]

No idea how all of you ride such big setups, ridden a 8.06 for a while and 8.125 for 1 session and that felt too wide and large for me. But I'm still tempted to try a 8.25 Ishod Full SE I found at the shop. Either that or a Low Pro II, 7.75 boards just aren't working for me anymore.

Curious what size is your shoe? And is it vulc or cupsole?

[rocklobster]

Expand Quote

No idea how all of you ride such big setups, ridden a 8.06 for a while and 8.125 for 1 session and that felt too wide and large for me. But I'm still tempted to try a 8.25 Ishod Full SE I found at the shop; looks slightly intimidating but powerful, if you get what I mean. Either that or a Low Pro II, but the 14.38 WB feels to wide for me. 7.75 boards just aren't working for me anymore, even for a smaller technical board, feel like I need a slightly longer setup so I can get a good amount of drag and flick for my tricks.

[close]

Curious what size is your shoe? And is it vulc or cupsole?

Usually a size 9.5 - 10.5, last shoe I really enjoyed was an old Habitat in 10.5 with a vulcanized sole. I'm using the Etnies Manara 9.5 vulc which I got for free when I got a setup 2nd hand off a dude who was quitting. The grip isn't great. Next pair will be pair a DC Cupsole which I got for a huge discount.

[munchbox]

No idea how all of you ride such big setups, ridden a 8.06 for a while and 8.125 for 1 session and that felt too wide and large for me. But I'm still tempted to try a 8.25 Ishod Full SE I found at the shop. Either that or a Low Pro II, 7.75 boards just aren't working for me anymore.

im 6'5 with a size 13 foot. a 9 to me is like an 8 to you lol

[Mesteezo]

got my board stolen for the first time ever so got a new setup;

oof, I feel your pain. Enjoy the freshie 

[switchmongojazzpush]

Set-up this 8.38" Private Joy board today. If you aren't familiar with their videos I highly recommend checking them out!

[moonordie]

Expand Quote

No idea how all of you ride such big setups, ridden a 8.06 for a while and 8.125 for 1 session and that felt too wide and large for me. But I'm still tempted to try a 8.25 Ishod Full SE I found at the shop. Either that or a Low Pro II, 7.75 boards just aren't working for me anymore.

[close]

im 6'5 with a size 13 foot. a 9 to me is like an 8 to you lol

Since I'm non from the US I have no idea how tall is 6'5.
In my case I'm 1.76 mts and a size 8 us shoe. I skate 8.5 but anything smaller than 8.375 feels like a toothpick

[Shuh]

Expand Quote

Expand Quote

No idea how all of you ride such big setups, ridden a 8.06 for a while and 8.125 for 1 session and that felt too wide and large for me. But I'm still tempted to try a 8.25 Ishod Full SE I found at the shop; looks slightly intimidating but powerful, if you get what I mean. Either that or a Low Pro II, but the 14.38 WB feels to wide for me. 7.75 boards just aren't working for me anymore, even for a smaller technical board, feel like I need a slightly longer setup so I can get a good amount of drag and flick for my tricks.

[close]

Curious what size is your shoe? And is it vulc or cupsole?

[close]

Usually a size 9.5 - 10.5, last shoe I really enjoyed was an old Habitat in 10.5 with a vulcanized sole. I'm using the Etnies Manara 9.5 vulc which I got for free when I got a setup 2nd hand off a dude who was quitting. The grip isn't great. Next pair will be pair a DC Cupsole which I got for a huge discount.

I skate vulcs most size 10-10.5 I skate a 8.25 board, but I can jump on a friends 8 inch board and do a trick no problem. What bother me usually is the length of the tail if its too short I would feel super uncomfortable