The Set-up Thread

[white guy in a durag]

Expand Quote

Expand Quote

Expand Quote

alltimers will marshall 8.125" 14" WB bbs wood
venture 5.2low from who knows how long ago ?
spitfire 52mm F4 classic 99du
bronze / swiss bones

[close]

Didn’t know the 8.1 shape had a 14” WB. Do you have the other dimensions? I checked tactics and it seems to be off

[close]

Apologies , just remeasured , measuring from the middle of the bolt to the middle of the other bolt , it’s a tenth less than 14.25” , but if measuring from where the bolt holes start it’s 14”

[close]

Thanks for checking!

Expand Quote

copying pup



Quasi "Please go to Hell" egg
venture 6.1
spitfire classics 99a 56mm
quantumn isotopes
telum hardware
jessup

[close]

Bones soft bushings with 56mm wheels and no risers? God bless you, that setup would kill me. Makes me want another one of these decks though. Such a nice shape.

Don't worry, I'll put the risers on when my 58 classics come this Thursday

[Freelancevagrant]

Just set up this Sora and I’m fucking juiced. Grip art by Thom.




Blind Sora Imposter series 9.4” wide 14.5” wb
Ace 55 classics
Spitfire f4 56mm 99a classics
Bones big balls
Jessup
Diamond 7/8” Allen

[Gray Imp Sausage Metal]

gunna be hard to decide between that Blind and Quasi next time I'm buying a board...

[GBLange]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

Quasi 9” football
Venture 6.1s w/the wooden risers
56mm 99a conical fulls
Cons slips

Pointy shoes and pointy noseee

[close]

does it have the same wheelbase as the Quasi poolskater face deck? 13.875?

[close]

I read on a few sites that it was 14 but I just measured it and it seems like 13.875

[close]

sweet.. hopefully our local skateshop will get this..

[close]

Lol my local and quasi’s warehouse are both in Dayton so luckily I get pick of the litter even though it’s not a very big shop… would be pretty funny to order one from somewhere else just to have it shipped back here tho.

nice..i'm halfway across the world..Borneo Island

[munchbox]

gunna be hard to decide between that Blind and Quasi next time I'm buying a board...

[coexist3]

scumco 7.8
venture 5.2h
loophole 52mm

ryde or die vol.1

[Velcro Wallet]

Love this board.  9.75 Symmetrical Egg
169 Titaniums
49.99999 Boardycakes

Offfft!!! BIG love. Heroin Egg’s and Boardycakes wheels should be a package deal. So good together.

[Slugboi22]

Expand Quote

Love this board.  9.75 Symmetrical Egg
169 Titaniums
49.99999 Boardycakes

[close]

Offfft!!! BIG love. Heroin Egg’s and Boardycakes wheels should be a package deal. So good together.

How is the quality on the boardycakes? obviously it’s no formula four but are they pretty reliable? been keen on trying some for a curb setup.

[Acky Jacky]

Took this snapshot on the jet-bridge before the flight I’m about to take. Newish setup, learned back tails on this board (I’m 32, feels amazing).

Passport 8” (I didn’t measure the wb, feels like it’s gotta be more than 14” but not by much). Length is a little less than 32”. Kinda can’t decide whether I like 8’s or 8.25+ more.

Indy 139
Spitfire classic F4 53”
Reds (woulda switched my Swiss from my other setup but didn’t have time/lazy)
Shorty’s h/w

Reebok Revenge Club C from Poshmark, haven’t skated yet.

[user18081971]

congrats on learning back tails! Setup looks perfect tbh

[Boog]

Real 8.25
53 conical f4
149 forged hollows
Reds
Jessup ultra

[MusclesMarinara]

For anyone interested I bought one of the Hammers Klein decks last week and finally arrived today. Wish I bought 2 since this is most likely gonna end up a wall hanger. The shape is really cool, fat upfront than tapers near the tail, the cutting into the plys and raised inks of it are really something. BBS did an amazing job on these, there's 5 colored plys! Only ever seen DSM do that before. Dimensions are 8.25 x 31.9 with a 13.75 wb.

[FrozenIndustries]

Shape looks diesel as hell

[RichardBarkley]

For anyone interested I bought one of the Hammers Klein decks last week and finally arrived today. Wish I bought 2 since this is most likely gonna end up a wall hanger. The shape is really cool, fat upfront than tapers near the tail, the cutting into the plys and raised inks of it are really something. BBS did an amazing job on these, there's 5 colored plys! Only ever seen DSM do that before. Dimensions are 8.25 x 31.9 with a 13.75 wb.

Wow

Looks unreal

[Ok]

Jesus. I can say he’s never been my guy, and the older I got….well I usually just avoid his stuff.
I gotta say that graphic, shape, dimensions, and execution are dope.

[DarkPools]

Wait, since when does BBS do the divot and width engraving in between the mounting holes?

Is that new? I might have to retract my statements in another thread about my recent Zero deck pickups that I thought were Clutch  *thinking emoji*

[funeral_tuxedo]

For anyone interested I bought one of the Hammers Klein decks last week and finally arrived today. Wish I bought 2 since this is most likely gonna end up a wall hanger. The shape is really cool, fat upfront than tapers near the tail, the cutting into the plys and raised inks of it are really something. BBS did an amazing job on these, there's 5 colored plys! Only ever seen DSM do that before. Dimensions are 8.25 x 31.9 with a 13.75 wb.

@CrimsonGhost thats such a cool board. I really like that Greco is trying to do something different aesthetically with Hammers.

[rocklobster]

Expand Quote

For anyone interested I bought one of the Hammers Klein decks last week and finally arrived today. Wish I bought 2 since this is most likely gonna end up a wall hanger. The shape is really cool, fat upfront than tapers near the tail, the cutting into the plys and raised inks of it are really something. BBS did an amazing job on these, there's 5 colored plys! Only ever seen DSM do that before. Dimensions are 8.25 x 31.9 with a 13.75 wb.

[close]

@CrimsonGhost thats such a cool board. I really like that Greco is trying to do something different aesthetically with Hammers.

13.75 WB hot damn that's a first for anything wider than 8"

[Movies]

For anyone interested I bought one of the Hammers Klein decks last week and finally arrived today. Wish I bought 2 since this is most likely gonna end up a wall hanger. The shape is really cool, fat upfront than tapers near the tail, the cutting into the plys and raised inks of it are really something. BBS did an amazing job on these, there's 5 colored plys! Only ever seen DSM do that before. Dimensions are 8.25 x 31.9 with a 13.75 wb.

First board I've seen where I'd consider hanging it to show the top graphic. So nice.

[French manicure]

That Hammers board is amazing

[Acky Jacky]

congrats on learning back tails! Setup looks perfect tbh

Thank you my friend! I am shocked and pleased.

[shpongle]

lotties 8.5
ace af1 55
spitfire 56mm f4 classic 99d
jessup griptape

[funeral_tuxedo]

8.38 local shop deck
Thunder Tis 149s
All Ti nuts
Weird tri-wing Ti hardware
Rad slim F4s, legit this time 
Bones Swiss Six

I thought about purchasing the Real wooden riser pads for the east coast crust out here. Ultimately, decided to make my own with some carbon fiber I had laying around. 7 grams each. I'm 100% confident they won't help me skate better, but I need something to tinker around with, plus they were basically free.

@PuffinMuffin  how are the thunder modifications feeling?

[MysticalTypeExperience]

I thought about purchasing the Real wooden riser pads for the east coast crust out here. Ultimately, decided to make my own with some carbon fiber I had laying around. 7 grams each. I'm 100% confident they won't help me skate better, but I need something to tinker around with, plus they were basically free.

Love to see people nerding out over the little details like this.

Where'd you scoop the Ti hardware? I'd get some if it wasn't too expensive. Currently just using $1.28 Home Depot hardware which is working out nice. Low profile and all silver bolts which I prefer.

[iw0]

Expand Quote

I thought about purchasing the Real wooden riser pads for the east coast crust out here. Ultimately, decided to make my own with some carbon fiber I had laying around. 7 grams each. I'm 100% confident they won't help me skate better, but I need something to tinker around with, plus they were basically free.

[close]

Love to see people nerding out over the little details like this.

Where'd you scoop the Ti hardware? I'd get some if it wasn't too expensive. Currently just using $1.28 Home Depot hardware which is working out nice. Low profile and all silver bolts which I prefer.

oh hey, i still had the tab open with the Ti hardware from when puffin posted it - https://www.ebay.com/itm/274654295315?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2047675.l2557&nma=true&si=19sUxsXH36TOKngG6%252BlYaKNKBnc%253D&orig_cvip=true&nordt=true&rt=nc

[PuffinMuffin]

@PuffinMuffin  how are the thunder modifications feeling?

I haven't skated the risers yet, still can't skate for three more weeks. But the rest of the setup feels great.  Swapped the bottom Thunder bushings out for Krux K4 bushings, as they're the exact same height. Tensor ATG bushings are on the top and sleeved washers on the bottom. The kingpin never hangs up, and the trucks snap back to center quickly.

Expand Quote

I thought about purchasing the Real wooden riser pads for the east coast crust out here. Ultimately, decided to make my own with some carbon fiber I had laying around. 7 grams each. I'm 100% confident they won't help me skate better, but I need something to tinker around with, plus they were basically free.

[close]

Love to see people nerding out over the little details like this.

Where'd you scoop the Ti hardware? I'd get some if it wasn't too expensive. Currently just using $1.28 Home Depot hardware which is working out nice. Low profile and all silver bolts which I prefer.

Edited my comment cuz @iw0 already posted the link.

[Easy Slider]

Expand Quote

@PuffinMuffin  how are the thunder modifications feeling?

[close]

I haven't skated the risers yet, still can't skate for three more weeks. But the rest of the setup feels great.  Swapped the bottom Thunder bushings out for Krux K4 bushings, as they're the exact same height. Tensor ATG bushings are on the top and sleeved washers on the bottom. The kingpin never hangs up, and the trucks snap back to center quickly.

Expand Quote

Expand Quote

I thought about purchasing the Real wooden riser pads for the east coast crust out here. Ultimately, decided to make my own with some carbon fiber I had laying around. 7 grams each. I'm 100% confident they won't help me skate better, but I need something to tinker around with, plus they were basically free.

[close]

Love to see people nerding out over the little details like this.

Where'd you scoop the Ti hardware? I'd get some if it wasn't too expensive. Currently just using $1.28 Home Depot hardware which is working out nice. Low profile and all silver bolts which I prefer.

[close]

Edited my comment cuz @iw0 already posted the link.

Wait, you're already rolling around again? 

[gaunting]

carpet atiba guest model 8x31.6 14”WB I think?
spitfire f4 52mm 99a
Indy 139 forged hollow.
bones super swiss.
shake junt hardware allen 7/8”
bones medium bushings

switch between NB Tom knox 440 hi in the white/green and GT blazer low in black/white

[YungJugg]

Hockey 8.5 x 31.91x 14.25
Venture 5.8 w 88a Supercush & flat washer
55mm f4 classics
jessup, shortys allen, misc bearings

[shpongle]

Hockey 8.5 x 31.91x 14.25
Venture 5.8 w 88a Supercush & flat washer
55mm f4 classics
jessup, shortys allen, misc bearings

this looks fun! i love the way ventures grind and the stability on em too. after using ace for so long, ventures are a nice change