Author Topic: The Set-up Thread  (Read 5895629 times)

0 Members and 8 Guests are viewing this topic.

TastyBurrito

  • Trade Count: (+2)
  • SLAP Pal
  • ******
  • Posts: 3199
  • Rep: 950
Re: The Set-up Thread
« Reply #29610 on: December 08, 2021, 01:17:09 PM »
Can't fucking stand those band-aid shapes Quasi, FA, Hockey etc. use from PS Sticks. Saw that the new FA and Hockey boards are Bareback. That will improve the shapes they use (I hope) and cut down on the shitty QC.

FA/Hockey has been BBS for a bit.

But they do still have those band-aid, super big nose shapes. Takes some getting used to, but I do enjoy the steeper kicks in comparison to Quasi/PS kicks.

user18081971

  • Guest
Re: The Set-up Thread
« Reply #29611 on: December 08, 2021, 02:33:57 PM »
Ive always loved tapered/pointy decks, but my Hockey board was probably the best board I’ve ever had. I felt like it improved my skating because of that rectangular shape. My board wasn’t steep at all though, maybe the nose just a little bit

jakecker

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 3
  • Rep: 2
Re: The Set-up Thread
« Reply #29612 on: December 08, 2021, 02:57:38 PM »

i know the quality is bad, but heres my setup:

Quasi 8.125
Independent 139 standard
Spitfire 52mm Tablets 99a
Bronson G3
Mob grip, Indy hardware.

jakecker

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 3
  • Rep: 2
Re: The Set-up Thread
« Reply #29613 on: December 08, 2021, 03:04:24 PM »
Can't fucking stand those band-aid shapes Quasi, FA, Hockey etc. use from PS Sticks. Saw that the new FA and Hockey boards are Bareback. That will improve the shapes they use (I hope) and cut down on the shitty QC.



i find these shapes super easy to do kickflips on because of the extra width on the nose, but i do see what you mean there is no reason for the nose to be as big as it is.

Fhk

  • Guest
Re: The Set-up Thread
« Reply #29614 on: December 08, 2021, 03:09:48 PM »
Those big nosed F/A-Hockey shapes sell like a muthafucka. I have skated about 10 and the quality was top notch on all of them. They flip so good, but are definitely awkward to look down out

munchbox

  • Trade Count: (+8)
  • SLAP Pal
  • ******
  • Posts: 3819
  • Rep: 1178
  • like….? brunch
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: The Set-up Thread
« Reply #29615 on: December 08, 2021, 03:42:09 PM »
only so many brands that make the band aid shape, if you dont like em there are countless options to choose from.

nobody is forcing you to ride a shape you dont like, leave them for those who do
while cool-guying is a real phenomenon, studies show that 83% of all cool-guying incidents can be attributed to the cool-guyee being an awkward weirdo

jakecker

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 3
  • Rep: 2
Re: The Set-up Thread
« Reply #29616 on: December 08, 2021, 04:36:13 PM »
I love the FA/quasi board shapes, im just saying sometimes when i get one the nose is humongous and bigger than i remember

Ray C. Usery

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 683
  • Rep: 192
  • My brother Roy is into music
Re: The Set-up Thread
« Reply #29617 on: December 08, 2021, 05:31:41 PM »
I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread



CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness

CannerSpaghetti

  • Guest
Re: The Set-up Thread
« Reply #29618 on: December 08, 2021, 06:11:21 PM »
I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread



CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness

I cant believe u mirrored the stickers. Anyway what's your favorite podcast?

rocklobster

  • Trade Count: (+21)
  • SLAP Pal
  • ******
  • Posts: 11121
  • Rep: 2426
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: The Set-up Thread
« Reply #29619 on: December 08, 2021, 06:20:26 PM »
Expand Quote
I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread
CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness
[close]

I cant believe u mirrored the stickers. Anyway what's your favorite podcast?

Has to be The Joe Rogan Experience
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

manysnakes

  • Guest
Re: The Set-up Thread
« Reply #29620 on: December 08, 2021, 06:20:44 PM »
Ive always loved tapered/pointy decks, but my Hockey board was probably the best board I’ve ever had. I felt like it improved my skating because of that rectangular shape. My board wasn’t steep at all though, maybe the nose just a little bit

I'm not religiously devoted to the brand, but yeah, I've had two FA boards and they were basically perfect. I keep flirting with other shit but Polar and FA consistently have exactly what I want from a skateboard. I also firmly believe that FA is ordering "better" wood from BBS because their decks seem to razor tail more slowly and keep their pop longer than anything else.

Woodshop

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1693
  • Rep: 340
  • Just deck / woodshop info
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: The Set-up Thread
« Reply #29621 on: December 08, 2021, 07:08:48 PM »
My street skating setup:

Real Reneal Doves 8.5 x 32.125, 14.375 WB
Ace AF1 55’s
Spitfire Classics 99a 54mm (worn to about 52 now)

I’m not sure if I like the shape that much. I prefer a long and wide nose/tail, on this deck they’re slightly tapered/sharp and a bit shorter. I think I’ll also go back to a 14.25 WB next time, to compensate for the weight of the Ace’s. I think it’ll give me a slightly snappier pop.


The other DLX 8.5 is shorter with the 14.25 wb but still pretty much the same shape.

If you want longer rounder kicks, something like Alien Workshop / Habitat have that shape with 14.25 wb, but they are definitely longer kicks and wide to the ends.

Just a few options anyway.


Ray C. Usery

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 683
  • Rep: 192
  • My brother Roy is into music
Re: The Set-up Thread
« Reply #29622 on: December 08, 2021, 08:27:22 PM »
I cant believe u mirrored the stickers.

I can

Anyway what's your favorite podcast?

Huberman Lab, Old Friends Catch Up and any of the ones that me a rocklobster's mother listens to

rocklobster

  • Trade Count: (+21)
  • SLAP Pal
  • ******
  • Posts: 11121
  • Rep: 2426
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: The Set-up Thread
« Reply #29623 on: December 08, 2021, 09:34:17 PM »
Expand Quote
I cant believe u mirrored the stickers.
[close]

I can

Expand Quote
Anyway what's your favorite podcast?
[close]

Huberman Lab, Old Friends Catch Up and any of the ones that me a rocklobster's mother listens to

My mom loves The Joe Rogan Experience and The Ben Shapiro Show!
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

Frank Sobotka

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 338
  • Rep: 102
  • We used to make shit in this country, build shit
Re: The Set-up Thread
« Reply #29624 on: December 09, 2021, 01:45:20 AM »
Expand Quote
Anyway what's your favorite podcast?
[close]

Huberman Lab, Old Friends Catch Up and any of the ones that me a rocklobster's mother listens to
Love this guy, ever since he did that piece for Jenkem, can't get enough of his purely scientific, no bullshit approach. I've learned so much about my own physiology and nervous system.

sammyz

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 379
  • Rep: 82
Re: The Set-up Thread
« Reply #29625 on: December 09, 2021, 02:26:36 AM »
Off popsicles for the meantime…i need to skate low curbs and flat ground, just so o can keep skating in my 50’s…for some reason when im on a popsicle all i think about is how big can i go. Anyway…





PP Nicky guerrero 10 x 14.5 x 31.8
Indy 159 barbee hollows
Spitfire 54mm 97a
Mob grip
Super swiss

somedudefromnj

  • Trade Count: (+2)
  • SLAP Pal
  • ******
  • Posts: 1413
  • Rep: 162
Re: The Set-up Thread
« Reply #29626 on: December 09, 2021, 04:39:45 AM »
I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread



CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness

Was wondering since Roberts always calls it twin paddle, are the kicks slightly bigger than your usual tail? Almost like a mellow double nose situation?

Lol. Eldee is definitely a human. He’s like a raider on horse back who’s kinda scared to do battle. Somehow he closes his eyes and swings his sword wildly and wakes up in a pile of dead orcs.


GBLange

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1097
  • Rep: 306
Re: The Set-up Thread
« Reply #29627 on: December 09, 2021, 05:17:20 AM »
Expand Quote
I'm confident that this set up could make it to the "Worst Of The Set-Up Thread" thread



CHOCOLATE ROBERTS TWIN CHUNK 8.25" DECK
width: 8.25"
length: 31.875"
wheelbase: 14"
nose: 6.84"
tail: 6.84"

ACE TRUCKS 44 AF1 - POLISHED
Axle width: 8.25” (209mm)
Hanger width: 5.6” (143mm)
Truck height: 2.1” (53mm)
Fits boards: 8.125” - 8.3”
Weight: 13.9 oz

BONES WHEELS
David Gravette Pro Model
Heaven & Hell
53x28
V2 Locks
street tech formula 99a

BONES® SWISS SKATEBOARD BEARINGS

ACE BOLTS ALLEN 7/8"

NINE CLUB LOGO GRIPTAPE
9in x 33in Nine Club Logo Sheet Mob Skateboard Griptape

Talk about madness
[close]

I cant believe u mirrored the stickers. Anyway what's your favorite podcast?

i did the same to the 9.75 symmetrical egg.from the stickers to the griptape job.

Huell Howser

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1350
  • Rep: 286
Re: The Set-up Thread
« Reply #29628 on: December 09, 2021, 09:22:50 AM »
my local shop's decks are all dlx wood so I just keep getting em. this angle makes my trucks look so mangled hahah. waiting for the day until they just snap. going on 1 & 1/2 years or so


8.75 shop deck
indy 159's
OJ juice bar
spitfire 55 formula 4 conicals(forget)

FrozenIndustries

  • Guest
Re: The Set-up Thread
« Reply #29629 on: December 09, 2021, 10:10:57 AM »


8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

fakiefs180

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2457
  • Rep: 814
    • a short part avatar image
Re: The Set-up Thread
« Reply #29630 on: December 09, 2021, 01:15:59 PM »


8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

I never had Venture's but this setup looks perfect.

And I am mad jealous of all you who have access to BBS local shop decks. Ya all are so lucky. Great wood and supporting the local shop.

FrozenIndustries

  • Guest
Re: The Set-up Thread
« Reply #29631 on: December 09, 2021, 01:39:14 PM »
Expand Quote


8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.
[close]

I never had Venture's but this setup looks perfect.

And I am mad jealous of all you who have access to BBS local shop decks. Ya all are so lucky. Great wood and supporting the local shop.

Thank you, they're good trucks. The lows get hated on but they were all I skated pre-madness.

hobochimp

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1127
  • Rep: 277
Re: The Set-up Thread
« Reply #29632 on: December 09, 2021, 02:08:59 PM »


8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

This setup is beautiful. Looks like so much fun. Love the green stain too.

Weird question but what shoes are those? I like the rounded look of the toe box haha

FrozenIndustries

  • Guest
Re: The Set-up Thread
« Reply #29633 on: December 09, 2021, 02:18:58 PM »
Expand Quote


8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.
[close]

This setup is beautiful. Looks like so much fun. Love the green stain too.

Weird question but what shoes are those? I like the rounded look of the toe box haha

NB# 440 high! The best shoe.

Ok

  • Trade Count: (+4)
  • SLAP Pal
  • ******
  • Posts: 5752
  • Rep: 1317
Re: The Set-up Thread
« Reply #29634 on: December 09, 2021, 04:40:56 PM »


8.1" Clutch blank
Venture 5.2 lows
50mm F4 classics

The 9" pop was fun but exhausting, and the only other non-cruiser I had set up was my 8" DOA with Venture lows (nostalgia board). Had a blast skating it for the past week but I took a fat chip out of it, so I set up this blank from the stash.

I remember hating my last Clutch but the first session on this was nice.

Wet

scrub74

  • Trade Count: (0)
  • Newbie
  • *
  • Posts: 38
  • Rep: 22
Re: The Set-up Thread
« Reply #29635 on: December 10, 2021, 05:44:57 AM »
Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob



biaherl

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1208
  • Rep: 385
    • Why So Sad avatar image
Re: The Set-up Thread
« Reply #29636 on: December 10, 2021, 09:22:56 AM »
Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob



I hope they make that shape for a while. I haven't had a chance to skate it yet and it might be a year before I get a chance

Frank and Fred

  • Guest
Re: The Set-up Thread
« Reply #29637 on: December 10, 2021, 10:30:53 AM »
Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob



Oh oh. Symmetrical board with asymmetrical grip... might create a hole in the space-time continuum. Hold tight.

biaherl

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1208
  • Rep: 385
    • Why So Sad avatar image
Re: The Set-up Thread
« Reply #29638 on: December 10, 2021, 10:36:56 AM »
Expand Quote
Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob


[close]

Oh oh. Symmetrical board with asymmetrical grip... might create a hole in the space-time continuum. Hold tight.

Also would you call that a lurb or a cledge that you're skating? Asking for a friend

RichardBarkley

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 4542
  • Rep: -705
Re: The Set-up Thread
« Reply #29639 on: December 10, 2021, 12:14:20 PM »
Expand Quote
Expand Quote
Took the symmetrical egg for a spin, felt good.

169 hollows
bender allen hardware
quantums
54 classic 97s
mob


[close]

Oh oh. Symmetrical board with asymmetrical grip... might create a hole in the space-time continuum. Hold tight.
[close]

Also would you call that a lurb or a cledge that you're skating? Asking for a friend

It's perfect it's a curb but you can tell people it's a ledge.
I want to fight you so badly richard
Please give me your address ill make it my life goal to punsh your face in