Fuck-You-Thats-Why, seabassbooster, pops and 1 Guest are viewing this topic.
Redrilled my huffer to a 14.38 wb, I am soldYesterday felt good. https://youtu.be/28lFkd0G-70
Ched on nach is mand
Rad clips as always @144p but its bordering on sacrilegious to re-drill the Huffer.
Quote from: Frank and Fred on May 10, 2022, 09:19:12 AMExpand QuoteRad clips as always @144p but its bordering on sacrilegious to re-drill the Huffer.[close]I just can't ride a wb that big and with ventures it worked out perfectly.Seems like a prime candidate to be double drilled, the stock nose seems a bit short.
Rad clips as always @144p but its bordering on sacrilegious to re-drill the Huffer.[close]
while cool-guying is a real phenomenon, studies show that 83% of all cool-guying incidents can be attributed to the cool-guyee being an awkward weirdo
Quote from: 144p on May 10, 2022, 02:45:40 PMExpand QuoteQuote from: Frank and Fred on May 10, 2022, 09:19:12 AMExpand QuoteRad clips as always @144p but its bordering on sacrilegious to re-drill the Huffer.[close]I just can't ride a wb that big and with ventures it worked out perfectly.Seems like a prime candidate to be double drilled, the stock nose seems a bit short.[close]agreed. double drilled mine some years back without the toolhonestly might do it again cause the shape is so good
Quote from: Frank and Fred on May 10, 2022, 09:19:12 AMExpand QuoteRad clips as always @144p but its bordering on sacrilegious to re-drill the Huffer.[close]I just can't ride a wb that big and with ventures it worked out perfectly.Seems like a prime candidate to be double drilled, the stock nose seems a bit short.[close]
Re-drilled = Not a Huffer.Bad things might happen.Getting a little worried. There are Couches and Love Seats for that type of black magic.
Well I have like 9 Andy Anderson dated flight decks.
Quote from: Frank and Fred on May 11, 2022, 08:04:16 AMExpand QuoteRe-drilled = Not a Huffer.Bad things might happen.Getting a little worried. There are Couches and Love Seats for that type of black magic.[close]THIS IS A SAFE SPACE FOR PEOPLE THAT LIKE LONG WHEELBASES.
Re-drilled = Not a Huffer.Bad things might happen.Getting a little worried. There are Couches and Love Seats for that type of black magic.[close]
og = hufferredrilled = huff?
Skateboarding is a jokeAnd if you think otherwiseyou're fucked in the headIt's not that serious - Go fast, catch a frontside And remember why you love it
Re-drilling the Huffer is admitting the shape isn't perfect which is absolute heresy. Accept the long wheelbase and the wheelbase will accept you. We should keep our standards high or else it will spiral down to a stage where people are cutting their Huffers down to 8" popsicles.
All huffers should be welcomed. OG huffers, short huffers, and phawts.It’s the shape that matters most. If someone’s juiced on the shape, then they should be free to adjust it so it works best for them. #allhufferswelcome
Quote from: djoekr on May 11, 2022, 12:37:38 PMExpand QuoteRe-drilling the Huffer is admitting the shape isn't perfect which is absolute heresy. Accept the long wheelbase and the wheelbase will accept you. We should keep our standards high or else it will spiral down to a stage where people are cutting their Huffers down to 8" popsicles.[close]where does it stop? next you'll be commanding what trucks (brand/size), wheels (brand/size/duro/shape), bushings, risers, rails, bearings, axle nuts we need to use in order to maintain the purest form of the Huffer
Re-drilling the Huffer is admitting the shape isn't perfect which is absolute heresy. Accept the long wheelbase and the wheelbase will accept you. We should keep our standards high or else it will spiral down to a stage where people are cutting their Huffers down to 8" popsicles.[close]
Quote from: art hellman on May 11, 2022, 02:03:20 PMExpand QuoteQuote from: djoekr on May 11, 2022, 12:37:38 PMExpand QuoteRe-drilling the Huffer is admitting the shape isn't perfect which is absolute heresy. Accept the long wheelbase and the wheelbase will accept you. We should keep our standards high or else it will spiral down to a stage where people are cutting their Huffers down to 8" popsicles.[close]where does it stop? next you'll be commanding what trucks (brand/size), wheels (brand/size/duro/shape), bushings, risers, rails, bearings, axle nuts we need to use in order to maintain the purest form of the Huffer [close]Anti-Hero = hellride, so if I see any Huffers in the wild that aren't on Indys (the most hellride truck) I'm gonna start screaming and focus the deck.
Quote from: djoekr on May 11, 2022, 12:37:38 PMExpand QuoteRe-drilling the Huffer is admitting the shape isn't perfect which is absolute heresy. Accept the long wheelbase and the wheelbase will accept you. We should keep our standards high or else it will spiral down to a stage where people are cutting their Huffers down to 8" popsicles.[close]where does it stop? next you'll be commanding what trucks (brand/size), wheels (brand/size/duro/shape), bushings, risers, rails, bearings, axle nuts we need to use in order to maintain the purest form of the Huffer [close]
My apologies for upsetting the cult, I will enjoy my bastard of a board in isolation, only checking this topic with a burner account so as not to soil thy huffer name with my bastard of an abomination.Please forgive my sins.
I was a bit worried for a minute, but all good now.How much did you guys drill down, was it the same as the six hole plate at 3/8" or more than that?I could definitely see how that would work after looking at my board.@144p and @art hellman
Quote from: Mbrimson88 on May 11, 2022, 08:46:40 PMExpand QuoteI was a bit worried for a minute, but all good now.How much did you guys drill down, was it the same as the six hole plate at 3/8" or more than that?I could definitely see how that would work after looking at my board.@144p and @art hellman[close]I used the wheelbase jig that was posted on the forum a while back. I can’t remember the name but I bought the one with 3/8 spaced holes. Well worth the money.
I was a bit worried for a minute, but all good now.How much did you guys drill down, was it the same as the six hole plate at 3/8" or more than that?I could definitely see how that would work after looking at my board.@144p and @art hellman[close]
Quote from: 144p on May 11, 2022, 10:10:54 PMExpand QuoteQuote from: Mbrimson88 on May 11, 2022, 08:46:40 PMExpand QuoteI was a bit worried for a minute, but all good now.How much did you guys drill down, was it the same as the six hole plate at 3/8" or more than that?I could definitely see how that would work after looking at my board.@144p and @art hellman[close]I used the wheelbase jig that was posted on the forum a while back. I can’t remember the name but I bought the one with 3/8 spaced holes. Well worth the money.[close]Chems tool or something, but yeah the 3/8" is what I was thinking would be best.That is the original 6.87 nose with 3/8" makes it more like the usual 7.25 or so anyway.
Quote from: Mbrimson88 on May 11, 2022, 08:46:40 PMExpand QuoteI was a bit worried for a minute, but all good now.How much did you guys drill down, was it the same as the six hole plate at 3/8" or more than that?I could definitely see how that would work after looking at my board.@144p and @art hellman[close]I used the wheelbase jig that was posted on the forum a while back. I can’t remember the name but I bought the one with 3/8 spaced holes. Well worth the money.[close]