Author Topic: Gear madness support thread  (Read 370740 times)

0 Members and 30 Guests are viewing this topic.

DakotaRed

  • Guest
Re: Gear madness support thread
« Reply #1770 on: January 04, 2024, 06:47:47 AM »
Expand Quote
Expand Quote
Expand Quote
im in the end stages of madness
comfortable with my setup and shit, worrying about colors
gonna break in these spits today

[close]
Well mine just activated.  Where did you get those wheels and what formula?? :o
[close]
zumiez (not my fault)
formula 4 classics 99a 52mm
[close]
lol, that’s exactly the only place they turned up for me on an internet search. Dammit ::)

Maybe it’s a Zumiez exclusive ;D
blacklistboardshop.com has some. I found a set of 52's at my local play it again sports.

ejazzle

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 643
  • Rep: 148
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1771 on: January 04, 2024, 07:11:59 AM »
Just switched from 8.38 twin, 14.33, 51mm to 9.0 egg, 13.88, 57mm. Using the same 8.25 trucks.
Starting the year as mad as possible

you chose chaos for 2024. Godspeed

JM

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 3130
  • Rep: 926
Re: Gear madness support thread
« Reply #1772 on: January 04, 2024, 07:43:22 AM »
Expand Quote
Expand Quote
Expand Quote
Expand Quote
im in the end stages of madness
comfortable with my setup and shit, worrying about colors
gonna break in these spits today

[close]
Well mine just activated.  Where did you get those wheels and what formula?? :o
[close]
zumiez (not my fault)
formula 4 classics 99a 52mm
[close]
lol, that’s exactly the only place they turned up for me on an internet search. Dammit ::)

Maybe it’s a Zumiez exclusive ;D
[close]
blacklistboardshop.com has some. I found a set of 52's at my local play it again sports.
Thanks yo.

Google shopping turned up one or two other small shops as well.

Play it again! Noice. Must have been like $20?
Thanks y’all. It’s been fun.

New Dog
✌️

DakotaRed

  • Guest
Re: Gear madness support thread
« Reply #1773 on: January 04, 2024, 08:03:01 AM »
Expand Quote
Expand Quote
Expand Quote
Expand Quote
Expand Quote
im in the end stages of madness
comfortable with my setup and shit, worrying about colors
gonna break in these spits today

[close]
Well mine just activated.  Where did you get those wheels and what formula?? :o
[close]
zumiez (not my fault)
formula 4 classics 99a 52mm
[close]
lol, that’s exactly the only place they turned up for me on an internet search. Dammit ::)

Maybe it’s a Zumiez exclusive ;D
[close]
blacklistboardshop.com has some. I found a set of 52's at my local play it again sports.
[close]
Thanks yo.

Google shopping turned up one or two other small shops as well.

Play it again! Noice. Must have been like $20?
I think they were more or less standard price. Skate-wise it's usually miscellaneous price point stuff but you get lucky sometimes and they always have reds & hardware. I pop in when I'm in the area.

JM

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 3130
  • Rep: 926
Re: Gear madness support thread
« Reply #1774 on: January 04, 2024, 05:03:44 PM »
Madness averted on the wheels. I have brand new x97’s that I love. 

Instead I just bought another one of the same deck that I’m skating now, in the same DLX press number. (Thanks sale gear thread. Thank you once again for separating money from my bank account)
Thanks y’all. It’s been fun.

New Dog
✌️

goodatmeth

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2131
  • Rep: 649
Re: Gear madness support thread
« Reply #1775 on: January 05, 2024, 12:26:48 PM »
Expand Quote
Just switched from 8.38 twin, 14.33, 51mm to 9.0 egg, 13.88, 57mm. Using the same 8.25 trucks.
Starting the year as mad as possible
[close]

you chose chaos for 2024. Godspeed
It works. I absolutely love this setup. After a month of struggling and just not feeling right on the 8.38, this 9" setup does exactly what I want. It even flips much easier. Ollies feel right again and give me so much more confidence to jump on rails without missing the lock.
It's like I forgot I could skate. Sometimes it's actually the setup that's the problem, but I don't accept it and struggle for a month on a setup because I can't "waste" a deck. That's what growing up poor does to people I guess.
Now I'm gonna stick with this 9" setup for the life of the deck.
Kiss kiss goodnight

Gleefull508

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 179
  • Rep: 26
Re: Gear madness support thread
« Reply #1776 on: January 22, 2024, 05:58:26 AM »
I started skating dragon wheels and now if I try any of my other set ups I feel like my board doesn't roll at all.

I'm happy that I found the one setup I really enjoy (aces and dragon wheels) but now I have no interest in riding my other setups. I guess I have to get more dragon wheels but these spitfires I have on there are basically brand new so it feels like a waste

JM

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 3130
  • Rep: 926
Re: Gear madness support thread
« Reply #1777 on: January 22, 2024, 06:40:13 AM »
I started skating dragon wheels and now if I try any of my other set ups I feel like my board doesn't roll at all.

I'm happy that I found the one setup I really enjoy (aces and dragon wheels) but now I have no interest in riding my other setups. I guess I have to get more dragon wheels but these spitfires I have on there are basically brand new so it feels like a waste
Once you go X, it’s what you’ll always expect.
Thanks y’all. It’s been fun.

New Dog
✌️

camel filters

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 6241
  • Rep: 1903
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1778 on: January 22, 2024, 08:18:37 AM »
I started skating dragon wheels and now if I try any of my other set ups I feel like my board doesn't roll at all.

I'm happy that I found the one setup I really enjoy (aces and dragon wheels) but now I have no interest in riding my other setups. I guess I have to get more dragon wheels but these spitfires I have on there are basically brand new so it feels like a waste
I have dragons on my cruiser and almost died getting stuck trying to 5050 a quarter pipe. Please tell me this gets better as I break it in because I am not going to wax coping and the wheels work well on other obstacles.

Gleefull508

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 179
  • Rep: 26
Re: Gear madness support thread
« Reply #1779 on: January 22, 2024, 09:11:08 AM »
Expand Quote
I started skating dragon wheels and now if I try any of my other set ups I feel like my board doesn't roll at all.

I'm happy that I found the one setup I really enjoy (aces and dragon wheels) but now I have no interest in riding my other setups. I guess I have to get more dragon wheels but these spitfires I have on there are basically brand new so it feels like a waste
[close]
I have dragons on my cruiser and almost died getting stuck trying to 5050 a quarter pipe. Please tell me this gets better as I break it in because I am not going to wax coping and the wheels work well on other obstacles.

I got that a couple times at first but not so much anymore. This wheel has changed skating for me more than any other piece of gear ever has its insane

Ok

  • Trade Count: (+4)
  • SLAP Pal
  • ******
  • Posts: 5748
  • Rep: 1316
Re: Gear madness support thread
« Reply #1780 on: January 22, 2024, 10:15:22 AM »
Expand Quote
Expand Quote
I started skating dragon wheels and now if I try any of my other set ups I feel like my board doesn't roll at all.

I'm happy that I found the one setup I really enjoy (aces and dragon wheels) but now I have no interest in riding my other setups. I guess I have to get more dragon wheels but these spitfires I have on there are basically brand new so it feels like a waste
[close]
I have dragons on my cruiser and almost died getting stuck trying to 5050 a quarter pipe. Please tell me this gets better as I break it in because I am not going to wax coping and the wheels work well on other obstacles.
[close]

I got that a couple times at first but not so much anymore. This wheel has changed skating for me more than any other piece of gear ever has its insane


i haven’t given my dragons the time, skated them maybe 5xs.
my opinion is that they are keyframes. i don’t get it. they are cruiser wheels. this other stuff about them being the gift hasn’t matched up with my experiences.

but pushing down the street and ollieing up curbs is sick. truly.

Rick Trapasso

  • Guest
Re: Gear madness support thread
« Reply #1781 on: January 22, 2024, 12:37:11 PM »
Expand Quote
Expand Quote
Expand Quote
I started skating dragon wheels and now if I try any of my other set ups I feel like my board doesn't roll at all.

I'm happy that I found the one setup I really enjoy (aces and dragon wheels) but now I have no interest in riding my other setups. I guess I have to get more dragon wheels but these spitfires I have on there are basically brand new so it feels like a waste
[close]
I have dragons on my cruiser and almost died getting stuck trying to 5050 a quarter pipe. Please tell me this gets better as I break it in because I am not going to wax coping and the wheels work well on other obstacles.
[close]

I got that a couple times at first but not so much anymore. This wheel has changed skating for me more than any other piece of gear ever has its insane
[close]


i haven’t given my dragons the time, skated them maybe 5xs.
my opinion is that they are keyframes. i don’t get it. they are cruiser wheels. this other stuff about them being the gift hasn’t matched up with my experiences.

but pushing down the street and ollieing up curbs is sick. truly.

Dragons slide much better than keyframes, though keyframes eat up crust a bit better.

Slayer666

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 145
  • Rep: -31
Re: Gear madness support thread
« Reply #1782 on: January 22, 2024, 12:56:16 PM »
I have two main setups rn and they are basically the same I used to have really bad madness trying all sorts of gear to see what I liked best and the conclusion was just to skate what you got in the end if you worry too much it’s just gonna fuck you over but I think it was beneficial to my skating somehow if you’re willing to take that plunge. My point is I still have some gear lying around from when I bought a bunch of stuff to try and I recently switched to 97a conicals on an 8.4 baker to skate an indoor park all winter then I bought and 8.5 baker and it didn’t feel quite right with the conicals something about it being a little less poiny than the 8.4 and my wheels being completely even with the deck made me have to switch back to the 99 radials I had setup before which are rounder wheels for it basically just not to bother me as much when I look down. But I still want to use the 97 conicals for the indoor park so I went back to my 8.4 baker but I also had brand new Thunder 151s lights left over from when I went crazy buying new shit I didn’t need so against my better judgement I currently have two super similar setups both with risers and thunders one with 54mm 99a radials on the 8.5 baker and the other one with 56mm 97a conicals on the 8.4 baker. I’m kinda hyped on baker too rn it’s been a while since I’ve had one and it currently feels the best rn I have no intention on switching anytime soon I’ll probably keep buying baker boards till I rot and die tbh. So long story short I don’t know why I have two setups it kinda just happened but I feel like the small difference between the two is kinda helping me skate in some weird way making me adjust how I do stuff ever so slightly (creating new neurological pathways in my skateboarding brain) Plus it’s kinda nice to spice it up and ride something else when I feel like it without it being too different where I can’t land my usual tricks. If anyone has time to read all this feel free to tell me how delusional I am or kook me as much as you like for the somewhat disgusting behavior of having more than 1 setup cause I’ve always been under the impression it’s kinda crazy to have more than 1 at a time until recently. I’ll probably go back to just 1 eventually but let me cook

Gleefull508

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 179
  • Rep: 26
Re: Gear madness support thread
« Reply #1783 on: January 23, 2024, 09:43:27 AM »
I have two main setups rn and they are basically the same I used to have really bad madness trying all sorts of gear to see what I liked best and the conclusion was just to skate what you got in the end if you worry too much it’s just gonna fuck you over but I think it was beneficial to my skating somehow if you’re willing to take that plunge. My point is I still have some gear lying around from when I bought a bunch of stuff to try and I recently switched to 97a conicals on an 8.4 baker to skate an indoor park all winter then I bought and 8.5 baker and it didn’t feel quite right with the conicals something about it being a little less poiny than the 8.4 and my wheels being completely even with the deck made me have to switch back to the 99 radials I had setup before which are rounder wheels for it basically just not to bother me as much when I look down. But I still want to use the 97 conicals for the indoor park so I went back to my 8.4 baker but I also had brand new Thunder 151s lights left over from when I went crazy buying new shit I didn’t need so against my better judgement I currently have two super similar setups both with risers and thunders one with 54mm 99a radials on the 8.5 baker and the other one with 56mm 97a conicals on the 8.4 baker. I’m kinda hyped on baker too rn it’s been a while since I’ve had one and it currently feels the best rn I have no intention on switching anytime soon I’ll probably keep buying baker boards till I rot and die tbh. So long story short I don’t know why I have two setups it kinda just happened but I feel like the small difference between the two is kinda helping me skate in some weird way making me adjust how I do stuff ever so slightly (creating new neurological pathways in my skateboarding brain) Plus it’s kinda nice to spice it up and ride something else when I feel like it without it being too different where I can’t land my usual tricks. If anyone has time to read all this feel free to tell me how delusional I am or kook me as much as you like for the somewhat disgusting behavior of having more than 1 setup cause I’ve always been under the impression it’s kinda crazy to have more than 1 at a time until recently. I’ll probably go back to just 1 eventually but let me cook

Great advice saying skate what you got. And I probably will eventually. It just sucks when I got all this new gear for a new setup that I don't enjoy/ feel like is making me worse.

Xen

  • Trade Count: (+13)
  • SLAP Pal
  • ******
  • Posts: 9539
  • Rep: 728
  • Living in your head rent free! <3
Re: Gear madness support thread
« Reply #1784 on: January 23, 2024, 10:49:44 AM »
Great advice saying skate what you got. And I probably will eventually. It just sucks when I got all this new gear for a new setup that I don't enjoy/ feel like is making me worse.

It can easily make you feel worse (all the gear) then it reflects in your skating (why doesn't this work?).

I've been bouncing between 8.25/14"wb (too small) and 8.5/14.25"wb (too big), all hovering around 31.8x, having no luck with those dims, I decided to split the difference and found one that is damn close to the median numerically (quite surprised it existed and is regularly available)....first few skates and it's working great.

Using what you have on hand = the way (with the exception of having something that totally doesn't work, e.g., only having 159s and 7.75 decks on hand, then you should go buy something that fits).

moonordie

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7325
  • Rep: -3
  • ɹǝʌǝɹoɟ lloᴚ
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1785 on: February 01, 2024, 05:08:36 AM »
Should change my CF for some V5?
Sir, I'm going to politely, but firmly, ask you and your common sense to leave this establishment.

DarkPools

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2076
  • Rep: 600
Re: Gear madness support thread
« Reply #1786 on: February 01, 2024, 09:34:53 PM »
Should change my CF for some V5?

I did the other direction and realized the V5 was way narrow than the C or CF, which in my head before trying both, I thought V5 and CF were nearly identical in width and feel haha
IN
THAT
ORDER

Super Champion Fun Zone
Circa 'It's Time'

mstuntbless

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 75
  • Rep: 23
Re: Gear madness support thread
« Reply #1787 on: February 02, 2024, 02:26:35 PM »
Here I am eating my words. I have venture 5.8s on a 8.38 14.25 board with 54mm classics. How is this NOT feeling like the perfect set up?! It’s been about 2 weeks on it

Sedition

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2486
  • Rep: 1504
  • Fuck the revoltion. Bring on the apocalypse.
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1788 on: February 02, 2024, 02:36:03 PM »
Was at shop. They had a DLX 8.5/14.25. I've had those before. And always hated them (too short and stubby for me). But this one was a IV stamp. And my favorite color top stain. Stood on it, and was feeling nice. So, I bought it. Gripped it at home, and it was looking real, real nice. How had I not liked this deck, several times, before? Switched over trucks/wheels, and was excited to go skate it. Then I stood on it. "Oh, right. You really don't like this thing, and now it's all coming back as to why." Skated it for about 2 hours, and pretty much hated every second. Went home, and took that thing right apart. Why did I even buy this? Did I think it's performance aspects were suddenly going to change...if I tried it again? Oh, right. I know why I bought it; madness. That last few times I had that deck, I gave it away. I think this time I'll keep it around, so a year from now, when I decide to try it again...I won't have to buy another one.
"When life goes bad, make it go wronger"  -Gerwer

Ok

  • Trade Count: (+4)
  • SLAP Pal
  • ******
  • Posts: 5748
  • Rep: 1316
Re: Gear madness support thread
« Reply #1789 on: February 02, 2024, 02:37:51 PM »
Was at shop. They had a DLX 8.5/14.25. I've had those before. And always hated them (too short and stubby for me). But this one was a IV stamp. And my favorite color top stain. Stood on it, and was feeling nice. So, I bought it. Gripped it at home, and it was looking real, real nice. How had I not liked this deck, several times, before? Switched over trucks/wheels, and was excited to go skate it. Then I stood on it. "Oh, right. You really don't like this thing, and now it's all coming back as to why." Skated it for about 2 hours, and pretty much hated every second. Went home, and took that thing right apart. Why did I even buy this? Did I think it's performance aspects were suddenly going to change...if I tried it again? Oh, right. I know why I bought it; madness. That last few times I had that deck, I gave it away. I think this time I'll keep it around, so a year from now, when I decide to try it again...I won't have to buy another one.

this is me, with indys.

sometimes a deck just seems like the one tho. i can’t buy boards online anymore. hate it.

Mbrimson88

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7550
  • Rep: 1539
  • Just another skate shop guy
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1790 on: February 02, 2024, 03:20:45 PM »
Was at shop. They had a DLX 8.5/14.25. I've had those before. And always hated them (too short and stubby for me). But this one was a IV stamp. And my favorite color top stain. Stood on it, and was feeling nice. So, I bought it. Gripped it at home, and it was looking real, real nice. How had I not liked this deck, several times, before? Switched over trucks/wheels, and was excited to go skate it. Then I stood on it. "Oh, right. You really don't like this thing, and now it's all coming back as to why." Skated it for about 2 hours, and pretty much hated every second. Went home, and took that thing right apart. Why did I even buy this? Did I think it's performance aspects were suddenly going to change...if I tried it again? Oh, right. I know why I bought it; madness. That last few times I had that deck, I gave it away. I think this time I'll keep it around, so a year from now, when I decide to try it again...I won't have to buy another one.


If you still had those Venture trucks, they would work on that board with the shorter wheelbase, but it is still not Indy on 14.38 wb and I know you know that too.


Gone since 1988.  I talk too much about skateboards.  Sorry.

Sedition

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2486
  • Rep: 1504
  • Fuck the revoltion. Bring on the apocalypse.
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1791 on: February 02, 2024, 05:02:40 PM »
Expand Quote
Was at shop. They had a DLX 8.5/14.25. I've had those before. And always hated them (too short and stubby for me). But this one was a IV stamp. And my favorite color top stain. Stood on it, and was feeling nice. So, I bought it. Gripped it at home, and it was looking real, real nice. How had I not liked this deck, several times, before? Switched over trucks/wheels, and was excited to go skate it. Then I stood on it. "Oh, right. You really don't like this thing, and now it's all coming back as to why." Skated it for about 2 hours, and pretty much hated every second. Went home, and took that thing right apart. Why did I even buy this? Did I think it's performance aspects were suddenly going to change...if I tried it again? Oh, right. I know why I bought it; madness. That last few times I had that deck, I gave it away. I think this time I'll keep it around, so a year from now, when I decide to try it again...I won't have to buy another one.
[close]


If you still had those Venture trucks, they would work on that board with the shorter wheelbase, but it is still not Indy on 14.38 wb and I know you know that too.

I actually still do have them. But I don’t like milk all that much. I really hate Gin, too. Milk and Gin mixed together? No thanks. :)
« Last Edit: February 02, 2024, 08:01:01 PM by Sedition »
"When life goes bad, make it go wronger"  -Gerwer

Mbrimson88

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7550
  • Rep: 1539
  • Just another skate shop guy
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1792 on: February 03, 2024, 12:16:07 AM »
Expand Quote
Expand Quote
Was at shop. They had a DLX 8.5/14.25. I've had those before. And always hated them (too short and stubby for me). But this one was a IV stamp. And my favorite color top stain. Stood on it, and was feeling nice. So, I bought it. Gripped it at home, and it was looking real, real nice. How had I not liked this deck, several times, before? Switched over trucks/wheels, and was excited to go skate it. Then I stood on it. "Oh, right. You really don't like this thing, and now it's all coming back as to why." Skated it for about 2 hours, and pretty much hated every second. Went home, and took that thing right apart. Why did I even buy this? Did I think it's performance aspects were suddenly going to change...if I tried it again? Oh, right. I know why I bought it; madness. That last few times I had that deck, I gave it away. I think this time I'll keep it around, so a year from now, when I decide to try it again...I won't have to buy another one.
[close]


If you still had those Venture trucks, they would work on that board with the shorter wheelbase, but it is still not Indy on 14.38 wb and I know you know that too.
[close]

I actually still do have them. But I don’t like milk all that much. I really hate Gin, too. Milk and Gin mixed together? No thanks. :)


Well you could set it all up with some wheels you don't like either so it can really be your whole entire hating life type of setup you can have a stand on or even a look at any time you ever think that you would like to try anything other than DLX 8.25 on forged Indy 144s with 53 mm Classic wheels.

Gone since 1988.  I talk too much about skateboards.  Sorry.

Mbrimson88

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7550
  • Rep: 1539
  • Just another skate shop guy
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread I actually set that up the other day, even the b
« Reply #1793 on: February 03, 2024, 12:20:47 AM »
.


I actually set that up the other day, even the blue bushings and it is a fun setup, so I could see how that would work so well for you, or anyone else who wanted to try it for that matter.


What else is on your usual board?


DLX 8.25 IV stamp deck
Indy forged hollow 144 trucks with blue 92 cylinder bushings
Spitfire Classic 53 mm 99 duro wheels
Bearings?
Grip?
Bolts?

Any other mods or changes to what would be a fairly easy setup to make from all stock parts?


Helping with your madness to make more of my own...

Good fun though seeing what others ride / have as their preferred setup when I have done that before in the past.




Gone since 1988.  I talk too much about skateboards.  Sorry.

Sedition

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2486
  • Rep: 1504
  • Fuck the revoltion. Bring on the apocalypse.
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread I actually set that up the other day, even the b
« Reply #1794 on: February 03, 2024, 01:11:05 AM »
.


I actually set that up the other day, even the blue bushings and it is a fun setup, so I could see how that would work so well for you, or anyone else who wanted to try it for that matter.


What else is on your usual board?


DLX 8.25 IV stamp deck
Indy forged hollow 144 trucks with blue 92 cylinder bushings
Spitfire Classic 53 mm 99 duro wheels
Bearings?
Grip?
Bolts?

Any other mods or changes to what would be a fairly easy setup to make from all stock parts?


Helping with your madness to make more of my own...

Good fun though seeing what others ride / have as their preferred setup when I have done that before in the past.

Bearings: Super Swiss 6
Grip: Jessup
Bolts: Indy 7/8" Allen

Oh, I usually ride rails, too. Powell Rib Bones. No other mods, though.
"When life goes bad, make it go wronger"  -Gerwer

FUBAR

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 940
  • Rep: 268
Re: Gear madness support thread
« Reply #1795 on: February 03, 2024, 05:55:01 AM »
After years of stressing my wheels HAVE to be 51mm when new, I can now say 52mm is just fine too. Whew…needed to get that off my chest.

Ok

  • Trade Count: (+4)
  • SLAP Pal
  • ******
  • Posts: 5748
  • Rep: 1316
Re: Gear madness support thread
« Reply #1796 on: February 03, 2024, 06:45:13 AM »
After years of stressing my wheels HAVE to be 51mm when new, I can now say 52mm is just fine too. Whew…needed to get that off my chest.

extremely relevant to my interests

Sedition

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2486
  • Rep: 1504
  • Fuck the revoltion. Bring on the apocalypse.
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Gear madness support thread
« Reply #1797 on: February 03, 2024, 07:32:28 AM »
After years of stressing my wheels HAVE to be 51mm when new, I can now say 52mm is just fine too. Whew…needed to get that off my chest.

Damn, dude. That’s a bold move. I’m locked on 53, and the idea of going 54/52 is, well, a Cataclysmic abyss of peril and torment.
« Last Edit: February 03, 2024, 08:08:31 AM by Sedition »
"When life goes bad, make it go wronger"  -Gerwer

Thebird

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 588
  • Rep: 222
Re: Gear madness support thread
« Reply #1798 on: February 03, 2024, 07:40:04 AM »
After years of stressing my wheels HAVE to be 51mm when new, I can now say 52mm is just fine too. Whew…needed to get that off my chest.

I agree with this.  I switched to 52 for a while, but now for some reason I am back on 51 and I sometimes have thoughts about 50 lol.

Xen

  • Trade Count: (+13)
  • SLAP Pal
  • ******
  • Posts: 9539
  • Rep: 728
  • Living in your head rent free! <3
Re: Gear madness support thread
« Reply #1799 on: February 03, 2024, 07:21:01 PM »
52mm is the best, you want 53s but 52s are fine, you want 51s and 52s will be that in a good weeks worth of skating.