Which Bearings Are You Guys Running?

[slaab900turbo]

Reds. Picked up some Swiss on sale but have not set up yet.

[Basingstoke]

Mini Logo only £5.00 cheapest bearings that I have ever owned and not bad. Heard from a reliable source that they are Reds with two shields.

[Banned from the room]

White ceramic bones circa 2017. Since the moment I went ceramic I've known. I'm always going to prefer them to the standard.

All my ceramics go 8+ years. Shields are completely unnecessary I believe now too. They just get faster now.



Swiss. Rode them in moisture once. Never the same no matter how much I clean um.

I'm probably going to rip the shields off rn.

I can't find the post or remember the OP. Can we get an update on the $13 bag of ceramic 608s. Is it worth it so far?

[Banned from the room]

Expand Quote

I have G3 right now and my disappointment cannot be measured.

[close]

What you don't like about them and why are they bad? Genuine question. I never bought anything from Bronson and I think I mostly heard negative things about the bearings. At least one person told me, that Bronson Raws are good.

I've ridden raws. I enjoyed them for the hour or so. It's like a red.
Lot of homies ride the g3 but they buy regularly. They're young way less interested in limiting your waste and suff. They don't complain. They definitely notice how fast my shit is tho. They always say THOSE ARE VENTURES NOT ACES!  Or I don't understand how you can ride those wheels.

Virgins 

[fulfillthedream]

I presume you lubed the Isotopes? @fulfillthedream

I had a couple seize up but the lube worked wonders after a good spin and sesh.

yeah i used that 99% alcohol and that lube. over my break i may try to resurrect them

[moonordie]

Expand Quote

I have G3 right now and my disappointment cannot be measured.

[close]

What you don't like about them and why are they bad? Genuine question. I never bought anything from Bronson and I think I mostly heard negative things about the bearings. At least one person told me, that Bronson Raws are good.

They're noticeable slower than swiss, I know that they need time to break in but still I don't think it will get that much better.
Shields are loose, feels like a damn pimp my ride car since when the wheel stops spinning the shield keeps on moving and for some reason that bothers the shit out of me.

[rikki]

I have G3 right now and my disappointment cannot be measured.

Such overrated bearings. Better to use Bones Reds if you want to go with something inexpensive.

[moonordie]

Expand Quote

I have G3 right now and my disappointment cannot be measured.

[close]

Such overrated bearings. Better to use Bones Reds if you want to go with something inexpensive.

Only reason I got them is was because they were 50% but even like that they're not worth it.
My swiss 6 died and wanted to get some cheaper bearings in the meantime since I'm going on holidays and won't be skating + wanted to save money for it but wanted to get some sessions before that.
Update: just went back to the busted swiss 6 which are better than G3. Cages have multiple cracks on them so hopefully they won't give up on me soon, they just need to hold till pay day

[Ok]

Expand Quote

Expand Quote

I have G3 right now and my disappointment cannot be measured.

[close]

Such overrated bearings. Better to use Bones Reds if you want to go with something inexpensive.

[close]

Only reason I got them is was because they were 50% but even like that they're not worth it.
My swiss 6 died and wanted to get some cheaper bearings in the meantime since I'm going on holidays and won't be skating + wanted to save money for it but wanted to get some sessions before that.
Update: just went back to the busted swiss 6 which are better than G3. Cages have multiple cracks on them so hopefully they won't give up on me soon, they just need to hold till pay day

repeating myself here, but i use minilogos (had decent luck with cheapshots), or bones swiss (preferably swiss 6).
i don’t like reds. don’t like bronson.

i want to try skf.

when i need a cheap bearing, mini logos do what needs to be done, more than well enough.

[vktrvghn]

Swiss are my go to but I have reds on most of my setups at the moment. What's the deal with popped shields then besides how they sound?

[moonordie]

Swiss are my go to but I have reds on most of my setups at the moment. What's the deal with popped shields then besides how they sound?

Is a great way to make your bearings last less.

[Banned from the room]

I was forced to clean my shit cuz everything got wet.

This is the inside of a ceramic bones. I bought them in 2017 used from a homie who was desperate for bread.

I tried to clean um once a year minimum. They've seen ever season since very few missed days.

Look at the track. It just st came out the acetone no polishing yet. Random selection.

As you can see the ceramic balls keep the track nice and clean. If you wanna save money definitely buy ceramic.





So worth it. I've had several metal sets die all the way on side boards in this time. I take much better Care of the metal ones too

[Banned from the room]

I show you my inside part

[Banned from the room]

One more example of awesome for the pals.

I know it's hard to see because of the Obama phone camera but I assure you there are zero deformed bearings in the cup.




Nothing but ceramics do that

Tools of the trade. thecup on the left has 3 pinholes on the edge of the top so I can squeeze transfer and recycle my acetone.





Example. The parts and scum stay in the squeeze cup. Fluid passes through easily without losing nothing






End result

[Banned from the room]

This Osiris symbol is bearing position 1 for reassembly

[Richard Skidder]

Got damn @Uncle Flea with the master class! Speed is the reward for dedication.

[#alexander#]

I can't find the post or remember the OP. Can we get an update on the $13 bag of ceramic 608s. Is it worth it so far?

I think that would be me, I actually just cleaned the bearings for the first time today. I definitely think the claim that the balls polish the races is true they have been getting faster the more I skate them. I also found ceramic balls that will fit the six ball bones and it’s got me like… 🤔

[Crust]

Bones Reds. Do the job for a decent price

[FatGuy92]

I've been running Quantum Atoms on my main setup for awhile now. I honestly don't even remember when I bought them, but even without regular maintenance, they're fast af and are easily the best bearings I've tried. Anyone have experience with the cheaper models (vectors/metallics)? The set of G3s I have in my slappy setup are finally starting to crap out and I'm wondering if it's worth spending extra for Atoms/Isotopes.

[@bolts_the_snowman on IG]

A pair of reds in one wheel, a pair of shake hunts in another, a pair of Bronson G3’s in one and one shorty and on reds bearing on the fourth one. My bearings tend to explode every time

[BartHarleyJarvis]

I've been running Quantum Atoms on my main setup for awhile now. I honestly don't even remember when I bought them, but even without regular maintenance, they're fast af and are easily the best bearings I've tried. Anyone have experience with the cheaper models (vectors/metallics)? The set of G3s I have in my slappy setup are finally starting to crap out and I'm wondering if it's worth spending extra for Atoms/Isotopes.

I have a set of quantum metallics that I haven’t ridden a ton, they’re relegated to a back up set up, but they’re fine. My biggest complaint is that they seem to get a little dry and squeak. I just add some graphflo and that usually takes care of it.

If you can find a good price I say go for it, otherwise they aren’t necessarily worth the upcharge over reds or whatever else.

Love my atoms/isotopes though

[Banned from the room]

Expand Quote

I can't find the post or remember the OP. Can we get an update on the $13 bag of ceramic 608s. Is it worth it so far?

[close]

I think that would be me, I actually just cleaned the bearings for the first time today. I definitely think the claim that the balls polish the races is true they have been getting faster the more I skate them. I also found ceramic balls that will fit the six ball bones and it’s got me like… 🤔

Hell yeah. I'm betting that they will fit anything but raws.

608s pretty standard.

[Banned from the room]

A pair of reds in one wheel, a pair of shake hunts in another, a pair of Bronson G3’s in one and one shorty and on reds bearing on the fourth one. My bearings tend to explode every time

Gotta maybe get some swiss cages. I'm pretty sure that's why they cost more. Those cages are anti explosion as the cup the balls much firmer.

[JimmyFive]

I used to go through all that hassle cleaning bearings but now I just use the Bones bearing cleaner. It's much more efficient IMO. I'm sure I used to scratch up my bearings pulling them to pieces.

For me Bronson G3's have been fast and totally serviceable. Bones Swiss are still going at 2 years bar one bearing that occasionally seizes. Quantum Atoms have been great, super fast but I can't get used to the noise they make. My fave at the moment is actually Modus Blue! Once the grease breaks in (I used some lighter oil to help it along) they are very smooth and very fast.

[JimmyFive]

Expand Quote

A pair of reds in one wheel, a pair of shake hunts in another, a pair of Bronson G3’s in one and one shorty and on reds bearing on the fourth one. My bearings tend to explode every time

[close]

Gotta maybe get some swiss cages. I'm pretty sure that's why they cost more. Those cages are anti explosion as the cup the balls much firmer.

Interesting. I know SKF make fibreglass reinforced retainers for their skate and "stuntmaster" inline bearings -perhaps Bones have a similarly enforced cage for their Swiss range as opposed to the usual nylon retainers?

[corey websturd]

Bronson Raws are the best to me despite the noise they produce.But at least people hear you comming from behind.

[JimmyFive]

Bronson Raws are the best to me despite the noise they produce.But at least people hear you comming from behind.

How long have you been running the Raws? Lots of ppl love them, I just cant get my head around a shieldless bearing. I guess a shield adds friction but surely the balls and races will get nicked up by debris and the bearings will fail faster than otherwise?

[DERBY]

is the quantum lube supposed to be black? had two sets of isotopes and theyre kinda mid. havent had swiss but been thinking bout em lately

[Banned from the room]

I used to go through all that hassle cleaning bearings but now I just use the Bones bearing cleaner. It's much more efficient IMO. I'm sure I used to scratch up my bearings pulling them to pieces.

For me Bronson G3's have been fast and totally serviceable. Bones Swiss are still going at 2 years bar one bearing that occasionally seizes. Quantum Atoms have been great, super fast but I can't get used to the noise they make. My fave at the moment is actually Modus Blue! Once the grease breaks in (I used some lighter oil to help it along) they are very smooth and very fast.

My bearings get mad hair in um. Especially cat hair. Probably because I like to stand on my board in the house.

I tried just building a shake cup. I gotta full tear apart. I can't help it. It takes way less cleaner too.

[Banned from the room]

Expand Quote

Expand Quote

A pair of reds in one wheel, a pair of shake hunts in another, a pair of Bronson G3’s in one and one shorty and on reds bearing on the fourth one. My bearings tend to explode every time

[close]

Gotta maybe get some swiss cages. I'm pretty sure that's why they cost more. Those cages are anti explosion as the cup the balls much firmer.

[close]

Interesting. I know SKF make fibreglass reinforced retainers for their skate and "stuntmaster" inline bearings -perhaps Bones have a similarly enforced cage for their Swiss range as opposed to the usual nylon retainers?

I think the cages are just beefier. They definitely keep a tighter tolerance after tearing them down. Way harder to pop out too.