Author Topic: Venture 2020  (Read 364456 times)

0 Members and 2 Guests are viewing this topic.

hiljentaa

  • Trade Count: (0)
  • Sr. Member
  • ****
  • Posts: 308
  • Rep: 317
Re: Venture 2020
« Reply #1620 on: April 25, 2021, 11:12:24 PM »
Does anyone know the weight on 5.2 V Lights Hi?


Did you ride the Indys on the April deck, if so what did you prefer between the Indys and Venture

Tactics has the 5.2 Hi V-Lights at ~340g each.

https://www.tactics.com/venture/v-lights-skateboard-trucks/all-polished-52-hi

I haven't ridden the Indys on that April.

I have the Indy 144s on a 14.25 wheelbase currently, and the overall wheelbase (axle to axle) is shorter than on the April.

I think it'd be too squirrely for my ability to manage hah

RichardBarkley

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 3989
  • Rep: -769
Re: Venture 2020
« Reply #1621 on: April 26, 2021, 05:10:10 AM »
Why did I ever leave Venture.

I skated thunders the last year and had a few weeks on Ace and it did nothing for my skating.

Just went back out on my 5.2 low cast and it just feels so good.
I want to fight you so badly richard
Please give me your address ill make it my life goal to punsh your face in

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10303
  • Rep: 1964
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Venture 2020
« Reply #1622 on: April 26, 2021, 07:34:19 AM »
Why did I ever leave Venture.

I skated thunders the last year and had a few weeks on Ace and it did nothing for my skating.

Just went back out on my 5.2 low cast and it just feels so good.

Radiohead said it best:
You do it to yourself, you do
And that's what really hurts
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

Idk

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2125
  • Rep: 314
Re: Venture 2020
« Reply #1623 on: April 26, 2021, 12:26:10 PM »
On one of the experience episodes Kelly Hart mentions that Koston redrills his Ventures.

CaptainBushwacker

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 117
  • Rep: 13
Re: Venture 2020
« Reply #1624 on: April 28, 2021, 03:30:28 AM »
So I was wondering.

I've been riding Girl G052 for the last month, with Venture 5.6 V-Lights.
The 14" WB is working nicely with them shits.

But I've seen Carl Aikens rocking the G016, which is 8.375. Also with Ventures, buuut the WB on that board is 14.25.

Since the store I was planning to buy from only has the G016 with the Pop Secret tech that I like for durability, should I go for it, or is the 14.25 wb too much? Any experiences with that shape and ventures?

Edit: https://crailtap.com/shapes/#g016
« Last Edit: April 28, 2021, 03:55:50 AM by CaptainBushwacker »

Esmith5488

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2272
  • Rep: 400
Re: Venture 2020
« Reply #1625 on: April 28, 2021, 05:18:17 AM »
So I was wondering.

I've been riding Girl G052 for the last month, with Venture 5.6 V-Lights.
The 14" WB is working nicely with them shits.

But I've seen Carl Aikens rocking the G016, which is 8.375. Also with Ventures, buuut the WB on that board is 14.25.

Since the store I was planning to buy from only has the G016 with the Pop Secret tech that I like for durability, should I go for it, or is the 14.25 wb too much? Any experiences with that shape and ventures?

Edit: https://crailtap.com/shapes/#g016
While I don’t have experience with that particular shape I often run ventures on a 14.25 wheelbase and enjoy it. I’m a short dude and even then the wheelbase doesn’t bother me. I would even say if the tail has enough length it should even it out but I’m riding a board that has a 31.5 length and a short tail so I don’t know anything ha. If anything when I went up from 14 to 14.25 wheelbases my manual tricks feel better

CaptainBushwacker

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 117
  • Rep: 13
Re: Venture 2020
« Reply #1626 on: April 28, 2021, 05:32:12 AM »
Expand Quote
So I was wondering.

I've been riding Girl G052 for the last month, with Venture 5.6 V-Lights.
The 14" WB is working nicely with them shits.

But I've seen Carl Aikens rocking the G016, which is 8.375. Also with Ventures, buuut the WB on that board is 14.25.

Since the store I was planning to buy from only has the G016 with the Pop Secret tech that I like for durability, should I go for it, or is the 14.25 wb too much? Any experiences with that shape and ventures?

Edit: https://crailtap.com/shapes/#g016
[close]
While I don’t have experience with that particular shape I often run ventures on a 14.25 wheelbase and enjoy it. I’m a short dude and even then the wheelbase doesn’t bother me. I would even say if the tail has enough length it should even it out but I’m riding a board that has a 31.5 length and a short tail so I don’t know anything ha. If anything when I went up from 14 to 14.25 wheelbases my manual tricks feel better

Thanks for the feedback!

I was also wondering about the tail length, because the G052 has a 6.8 tail, so I would say fairly long? But it looks and feels pretty stubby.

G016 tail is 6.3 so half an inch shorter, which seems kinda extreme.

rocklobster

  • Trade Count: (+18)
  • SLAP Pal
  • ******
  • Posts: 10303
  • Rep: 1964
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
    Gold Topic Start Gold Topic Start : Start a topic with over 10,000 replies.
Re: Venture 2020
« Reply #1627 on: April 28, 2021, 06:29:44 AM »
Expand Quote
Expand Quote
So I was wondering.

I've been riding Girl G052 for the last month, with Venture 5.6 V-Lights.
The 14" WB is working nicely with them shits.

But I've seen Carl Aikens rocking the G016, which is 8.375. Also with Ventures, buuut the WB on that board is 14.25.

Since the store I was planning to buy from only has the G016 with the Pop Secret tech that I like for durability, should I go for it, or is the 14.25 wb too much? Any experiences with that shape and ventures?

Edit: https://crailtap.com/shapes/#g016
[close]
While I don’t have experience with that particular shape I often run ventures on a 14.25 wheelbase and enjoy it. I’m a short dude and even then the wheelbase doesn’t bother me. I would even say if the tail has enough length it should even it out but I’m riding a board that has a 31.5 length and a short tail so I don’t know anything ha. If anything when I went up from 14 to 14.25 wheelbases my manual tricks feel better
[close]

Thanks for the feedback!

I was also wondering about the tail length, because the G052 has a 6.8 tail, so I would say fairly long? But it looks and feels pretty stubby.

G016 tail is 6.3 so half an inch shorter, which seems kinda extreme.

I think it will be a lot of adjust to: longer wheelbase plus shorter length, coupled with Venture V-Lights is going to give a very short feeling tail.

That said I got a lightly used G016 as an interim deck until my delivery comes in. If i went Ventures I would swap out to a cast baseplate to reduce the wheelbase displacement or Thunders.
Venture Truck Height:

5.0 & 5.2 LO
STANDARD - 1.88” - 47.75mm
FORGED - 1.85”- 46.99mm

5.0 ,5.2, 5.6, 5.8 & 6.1 HI
STANDARD - 2.09” - 53.09mm
FORGED - 2.04” - 51.82m

Esmith5488

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2272
  • Rep: 400
Re: Venture 2020
« Reply #1628 on: April 28, 2021, 02:13:37 PM »
Expand Quote
Expand Quote
Expand Quote
So I was wondering.

I've been riding Girl G052 for the last month, with Venture 5.6 V-Lights.
The 14" WB is working nicely with them shits.

But I've seen Carl Aikens rocking the G016, which is 8.375. Also with Ventures, buuut the WB on that board is 14.25.

Since the store I was planning to buy from only has the G016 with the Pop Secret tech that I like for durability, should I go for it, or is the 14.25 wb too much? Any experiences with that shape and ventures?

Edit: https://crailtap.com/shapes/#g016
[close]
While I don’t have experience with that particular shape I often run ventures on a 14.25 wheelbase and enjoy it. I’m a short dude and even then the wheelbase doesn’t bother me. I would even say if the tail has enough length it should even it out but I’m riding a board that has a 31.5 length and a short tail so I don’t know anything ha. If anything when I went up from 14 to 14.25 wheelbases my manual tricks feel better
[close]

Thanks for the feedback!

I was also wondering about the tail length, because the G052 has a 6.8 tail, so I would say fairly long? But it looks and feels pretty stubby.

G016 tail is 6.3 so half an inch shorter, which seems kinda extreme.
[close]

I think it will be a lot of adjust to: longer wheelbase plus shorter length, coupled with Venture V-Lights is going to give a very short feeling tail.

That said I got a lightly used G016 as an interim deck until my delivery comes in. If i went Ventures I would swap out to a cast baseplate to reduce the wheelbase displacement or Thunders.
I would also go with the cast plates but that’s my personal preference.

Bunk Moreland

  • Guest
Re: Venture 2020
« Reply #1629 on: April 28, 2021, 11:36:46 PM »
I've ridden ventures my entire nearly 30 years of skateboarding and I've never noticed the wheelbase thing. It's negligible if there's any difference at all.

Boog

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 647
  • Rep: 201
Re: Venture 2020
« Reply #1630 on: April 29, 2021, 07:51:02 AM »
I've ridden ventures my entire nearly 30 years of skateboarding and I've never noticed the wheelbase thing. It's negligible if there's any difference at all.
Seriously it's nothing you can't get used to in a couple sessions.

Uncle Flea

  • Trade Count: (+1)
  • SLAP Pal
  • ******
  • Posts: 7899
  • Rep: 953
    • Aural Buthcheryers avatar image
Re: Venture 2020
« Reply #1631 on: April 29, 2021, 08:46:37 AM »
It depends on how you wanna skate.

The closer I get to a 15" wb the less my board of wants to spin 360.

This is true with all trucks I've tried.
Plz stop killing each other
(A)pl(E)




JANUS

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2308
  • Rep: 602
Re: Venture 2020
« Reply #1632 on: April 29, 2021, 09:19:37 AM »
Forgive my ignorance, but what is the purpose of replacing the stock top washer with a flat one?
If you can't handle me at my Marc Johnson, you don't deserve me at my Bobby Puleo.

Firebert

  • Trade Count: (+2)
  • SLAP Pal
  • ******
  • Posts: 3307
  • Rep: 230
    • Instagram avatar image
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Venture 2020
« Reply #1633 on: April 29, 2021, 09:29:53 AM »
Forgive my ignorance, but what is the purpose of replacing the stock top washer with a flat one?
Stock washers can bind the turn when they hit the hangar and flat washers don't.

JANUS

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2308
  • Rep: 602
Re: Venture 2020
« Reply #1634 on: April 29, 2021, 09:33:46 AM »
Expand Quote
Forgive my ignorance, but what is the purpose of replacing the stock top washer with a flat one?
[close]
Stock washers can bind the turn when they hit the hangar and flat washers don't.

That makes sense. Thanks.
If you can't handle me at my Marc Johnson, you don't deserve me at my Bobby Puleo.

Fhk

  • Guest
Re: Venture 2020
« Reply #1635 on: April 29, 2021, 01:53:56 PM »
Looking for some success stories on Ventures on a 14.5 wb Any of you homeboys/homegirls have some intel?

augustmoon

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 4354
  • Rep: 803
Re: Venture 2020
« Reply #1636 on: April 29, 2021, 02:51:16 PM »
Quote
Fuck brandon biebel... The lemon thrower

tzhangdox

  • Trade Count: (+7)
  • SLAP Pal
  • ******
  • Posts: 2145
  • Rep: 521
Re: Venture 2020
« Reply #1637 on: April 29, 2021, 02:59:52 PM »
Looking for some success stories on Ventures on a 14.5 wb Any of you homeboys/homegirls have some intel?

I've done it and it was totally fine. On 14.38 with ventures right now and it feels perfect, 14.5 is pretty damn close.

Im v tall though so your mileage may vary.
« Last Edit: April 29, 2021, 03:58:29 PM by tzhangdox »

In A Jar

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 206
  • Rep: 35
    • just say null avatar image
  • SLAP OG SLAP OG : Been around since SLAP was a mag.
Re: Venture 2020
« Reply #1638 on: April 29, 2021, 03:06:21 PM »
Expand Quote
Looking for some success stories on Ventures on a 14.5 wb Any of you homeboys/homegirls have some intel?
[close]

I've done it and it was totally fine. On 14.38 with ventures right now and it feels perfect, 14.5 is pretty damn close.

Same.  It's fine.  I'm pretty tall.  I did also swap out to Ace at one point and it didn't make my treflips any better, just my ollies way worse.

Fhk

  • Guest
Re: Venture 2020
« Reply #1639 on: April 29, 2021, 03:53:01 PM »
^ Thanks! I will give it a shot..I am trying my best to be a one setup man..but I miss my 6.1s bad.

munchbox

  • Trade Count: (+8)
  • SLAP Pal
  • ******
  • Posts: 3120
  • Rep: 864
  • like….? brunch
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Venture 2020
« Reply #1640 on: April 29, 2021, 08:05:26 PM »
^ Thanks! I will give it a shot..I am trying my best to be a one setup man..but I miss my 6.1s bad.
6.1s add 3.125" to the wheelbase. those are the ventures to ride with a 14.5 wb if any
while cool-guying is a real phenomenon, studies show that 83% of all cool-guying incidents can be attributed to the cool-guyee being an awkward weirdo

drinny

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 160
  • Rep: 22
Re: Venture 2020
« Reply #1641 on: April 29, 2021, 10:57:13 PM »
I found I needed harder bushings in the 6.1s to get them to feel like regular (5.0,5.2) width Ventures. Otherwise they were way floppy.

Nothing mad just like a 95a sorted it .

Wonderful Whizzplank

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 107
  • Rep: 8
Re: Venture 2020
« Reply #1642 on: April 30, 2021, 03:04:04 AM »
Looking for some success stories on Ventures on a 14.5 wb Any of you homeboys/homegirls have some intel?

I can come close to that?

Got some 6.1s on a Krooked 8.75 (14.625wb) rn, from an AWS 8.75 (14.25wb) cause I felt I need more wheelbase. I adore it, though that might be because my setup in my "prime" was the same board shape on thunder 151's, so this kinda feels like home.
I am tall, but I've not felt any regrets from this setup.
Total newbie

Fhk

  • Guest
Re: Venture 2020
« Reply #1643 on: April 30, 2021, 04:49:52 AM »
Thanks guys.. I have a 9" Polar popsicle with new Aces on it, it's ok but I love Ventures so I'm heading back to where I belong.

music critic

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 63
  • Rep: 0
Re: Venture 2020
« Reply #1644 on: May 06, 2021, 08:51:57 PM »
I don't have the attention to go through all of this thread but...

What other bushings do people put in ventures to get a little more turn?  I've had bad experience with bones but would try again if thats what everyone is running.  After skating new aces for a few weeks and coming back to V's I want just a bit more turn/carve from venture.

Lloyd Braun

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 762
  • Rep: 80
Re: Venture 2020
« Reply #1645 on: May 06, 2021, 09:01:03 PM »
Looking for some success stories on Ventures on a 14.5 wb Any of you homeboys/homegirls have some intel?

Thats all I used to skate 2 years ago, Isle and DLX boards mainly. I skated great with them, then I started reading the shoes/gear thread more often and switched to 14.25. TBH for me it doesn't make a huge difference, I just skated a 14.5 3 boards or so ago and 360 flips still worked. For me its mostly all mental, but I don't like changing all the time, I try to skate the same shapes.

hobochimp

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 1133
  • Rep: 277
Re: Venture 2020
« Reply #1646 on: May 07, 2021, 12:44:43 AM »
I don't have the attention to go through all of this thread but...

What other bushings do people put in ventures to get a little more turn?  I've had bad experience with bones but would try again if thats what everyone is running.  After skating new aces for a few weeks and coming back to V's I want just a bit more turn/carve from venture.

Ace low bushings with flat washer on top. My favorite bushings for venture

Boog

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 647
  • Rep: 201
Re: Venture 2020
« Reply #1647 on: May 07, 2021, 07:49:43 AM »
I don't have the attention to go through all of this thread but...

What other bushings do people put in ventures to get a little more turn?  I've had bad experience with bones but would try again if thats what everyone is running.  After skating new aces for a few weeks and coming back to V's I want just a bit more turn/carve from venture.
Bones medium if you're wanting really turny. Bones hards if you weigh over 160 lbs.

munchbox

  • Trade Count: (+8)
  • SLAP Pal
  • ******
  • Posts: 3120
  • Rep: 864
  • like….? brunch
  • Bronze Topic Start Bronze Topic Start : Start a topic with over 1,000 replies.
Re: Venture 2020
« Reply #1648 on: May 07, 2021, 08:36:37 AM »
im running indy super soft barrel bottoms with shaved stock purple tops (around 7mm). flat washers everywhere and riptides

slight rattle with the looseness and it feels perfect to me in these 5.6s paired with a 14" wheelbase deck
while cool-guying is a real phenomenon, studies show that 83% of all cool-guying incidents can be attributed to the cool-guyee being an awkward weirdo

Noble Experiment

  • Trade Count: (0)
  • SLAP Pal
  • ******
  • Posts: 2799
  • Rep: 284
Re: Venture 2020
« Reply #1649 on: May 07, 2021, 09:22:48 AM »
Been doing bones tops with Indy barrel bottoms (for more stability and because bones bottom bushings always seem to squish out on me somewhat quickly for some reason) in my venture 5.8s for a while now. Feels damn good.