Twin tail

[Paperclip20]

The 8.5 exorcism board is 14.375 wheelbase.

[Xen]

The 8.5 exorcism board is 14.375 wheelbase.

Ch'Ching.

Is it 32" long or 31.875 as noted around the web?

[flintstagram]

Expand Quote

The 8.5 exorcism board is 14.375 wheelbase.

[close]

Ch'Ching.

Is it 32" long or 31.875 as noted around the web?

31.875

[opesorry]

I think I finally came to the realization that I skate better off the nose of most boards I ride after being in denial about it for pretty much ever, what’s a good symmetrical shape that would be closer to that? Are most “twin tails” more of a middle ground than actually two tails? I skate 8” boards so maybe not a lot of options anyway.

It might be because I grew up skating my board the wrong direction because I didn’t know any better, but I’d rather find a symmetrical board than do that on purpose…

[Xen]

Expand Quote

Expand Quote

The 8.5 exorcism board is 14.375 wheelbase.

[close]

Ch'Ching.

Is it 32" long or 31.875 as noted around the web?

[close]

31.875

Sweet perfection. Just ordered one.

Thanks for the legwork!

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

I think I finally came to the realization that I skate better off the nose of most boards I ride after being in denial about it for pretty much ever, what’s a good symmetrical shape that would be closer to that? Are most “twin tails” more of a middle ground than actually two tails? I skate 8” boards so maybe not a lot of options anyway.

It might be because I grew up skating my board the wrong direction because I didn’t know any better, but I’d rather find a symmetrical board than do that on purpose…

The Foy, Neen, AWS Owlien twin (and the habitat) are more nose than tail; it's really only the DLX that's a true Twin Tail these days (no idea about the welcome) - that one looks more hybrid to me.

I like being able to krook either way (it's easier off the nose).

[Woodshop]

I think I finally came to the realization that I skate better off the nose of most boards I ride after being in denial about it for pretty much ever, what’s a good symmetrical shape that would be closer to that? Are most “twin tails” more of a middle ground than actually two tails? I skate 8” boards so maybe not a lot of options anyway.

It might be because I grew up skating my board the wrong direction because I didn’t know any better, but I’d rather find a symmetrical board than do that on purpose…

I would measure the length of the kicks (especially the nose) on whatever boards you have liked, as many standard boards are closer to a 6.8 to 7" nose with a 6.5" tail.

Twin tails are just that, often two tails, at 6.5 to 6.6" for many around the 8" size.  Twin noses are a bit longer, but there are not many, if any at all, in only 8" wide.

You could just ride normal boards that have a sideways graphic, eg Baker logo or Antihero eagle as two fairly recognisable graphics so it wouldn't be obvious you are riding the nose of the board.

[Woodshop]

This pic is big enough to show the specs on those stickers.

Ishod twin in 8.0 is only 6.55 in kick length, which is pretty much a normal tail by any other board.

[GBLange]

Expand Quote

Expand Quote

I just found a site that had three Neen 8.5 left, ordered them all so I am set for a while. 

[close]

Yeah!

At least you have boards.

So many people have wanted to order more of whatever they liked, but couldn't get hold of any, especially in limited shapes like that one.

[close]

Thanks bro. Here they are. Stoked I got three different top plys.

triplets

[Woodshop]

Triple the fun!

[Woodshop]

As XEN posted earlier

The one time Welcome did a popsicle was ages ago and seemingly sold out as soon as it hit shelves.

https://welcomeskateboards.com/collections/hardgoods/products/call-mary-on-labrys-hot-pink-8-5

8.5" x 31.95" with 14.25" Wheelbase


And then posted in the WBSWB thread:

A new challenger has entered the chat:

W/b is 14.25

[Easy Slider]

I think I finally came to the realization that I skate better off the nose of most boards I ride after being in denial about it for pretty much ever, what’s a good symmetrical shape that would be closer to that? Are most “twin tails” more of a middle ground than actually two tails? I skate 8” boards so maybe not a lot of options anyway.

It might be because I grew up skating my board the wrong direction because I didn’t know any better, but I’d rather find a symmetrical board than do that on purpose…

Dude check out my pics of the Neen bloards, those are twin noses. Try to find one but probably I snatched all of them up.

[Easy Slider]

Expand Quote

Expand Quote

Expand Quote

The 8.5 exorcism board is 14.375 wheelbase.

[close]

Ch'Ching.

Is it 32" long or 31.875 as noted around the web?

[close]

31.875

[close]

Sweet perfection. Just ordered one.

Thanks for the legwork!

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

Expand Quote

I think I finally came to the realization that I skate better off the nose of most boards I ride after being in denial about it for pretty much ever, what’s a good symmetrical shape that would be closer to that? Are most “twin tails” more of a middle ground than actually two tails? I skate 8” boards so maybe not a lot of options anyway.

It might be because I grew up skating my board the wrong direction because I didn’t know any better, but I’d rather find a symmetrical board than do that on purpose…

[close]

The Foy, Neen, AWS Owlien twin (and the habitat) are more nose than tail; it's really only the DLX that's a true Twin Tail these days (no idea about the welcome) - that one looks more hybrid to me.

I like being able to krook either way (it's easier off the nose).

I can measure them but I am European so I‘ll have to calculate…plus I never measured a bloard except for width so I am not sure how to do it properly.  I‘ll see what I can do.

[opesorry]

Expand Quote

I think I finally came to the realization that I skate better off the nose of most boards I ride after being in denial about it for pretty much ever, what’s a good symmetrical shape that would be closer to that? Are most “twin tails” more of a middle ground than actually two tails? I skate 8” boards so maybe not a lot of options anyway.

It might be because I grew up skating my board the wrong direction because I didn’t know any better, but I’d rather find a symmetrical board than do that on purpose…

[close]

I would measure the length of the kicks (especially the nose) on whatever boards you have liked, as many standard boards are closer to a 6.8 to 7" nose with a 6.5" tail.

Twin tails are just that, often two tails, at 6.5 to 6.6" for many around the 8" size.  Twin noses are a bit longer, but there are not many, if any at all, in only 8" wide.

You could just ride normal boards that have a sideways graphic, eg Baker logo or Antihero eagle as two fairly recognisable graphics so it wouldn't be obvious you are riding the nose of the board.

Good call, I'll have to measure. And yeah that's a great point, maybe no one would notice haha

[Woodshop]

As most of the twins are coming out in at least 8.25 or more commonly 8.375 and some 8.5 there are not many options for a twin as only 8.0" as you asked for.

Keep looking though, as there might be some boards that fit the bill.

Quite a few shops like Tactics list the dimensions, including nose and tail lengths (even if they are often thought to be incorrect) but that should help a fair bit with finding boards that work for you.

[Bigwheelbite]

Never understood why skateboards were designed with a nose and tail tbh. Whoever came up with that stupid idea anyway? Once you get used to skating a symmetrical deck it feels so shit going back to a regular deck with nose & tail.

Symmetrical is life…

[opesorry]

Expand Quote

[close]

As most of the twins are coming out in at least 8.25 or more commonly 8.375 and some 8.5 there are not many options for a twin as only 8.0" as you asked for.

Keep looking though, as there might be some boards that fit the bill.

Quite a few shops like Tactics list the dimensions, including nose and tail lengths (even if they are often thought to be incorrect) but that should help a fair bit with finding boards that work for you.

I did notice that today on tactics actually, super helpful. Also surprised to see how short the tails of some boards I’ve skated really are in comparison so maybe just finding something with a bigger tail in general will help. Appreciate the help!

[backinaction]

Never understood why skateboards were designed with a nose and tail tbh. Whoever came up with that stupid idea anyway? Once you get used to skating a symmetrical deck it feels so shit going back to a regular deck with nose & tail.

Symmetrical is life…

Paul Schmitt has said in multiple interviews that having different noses and tails allow you to have the equivalent of two blades in your pocketknife.  Sometimes a trick may be easier off one end of the board vs the other.   I have notice that I can land a few certain tricks more regularly skating my directional board backwards.

That said, I still dig twin tails - especially on mini ramps. I hate skating a mini with my board backwards and on a regular board will always try to do two shove tricks in a row to get it back as quick as possible.

[Paperclip20]

Expand Quote

Never understood why skateboards were designed with a nose and tail tbh. Whoever came up with that stupid idea anyway? Once you get used to skating a symmetrical deck it feels so shit going back to a regular deck with nose & tail.

Symmetrical is life…

[close]

Paul Schmitt has said in multiple interviews that having different noses and tails allow you to have the equivalent of two blades in your pocketknife.  Sometimes a trick may be easier off one end of the board vs the other.   I have notice that I can land a few certain tricks more regularly skating my directional board backwards.

That said, I still dig twin tails - especially on mini ramps. I hate skating a mini with my board backwards and on a regular board will always try to do two shove tricks in a row to get it back as quick as possible.

Nothing against you and Schmitt personally but I hate that viewpoint. If people started with twin tails I doubt that would be an arguement. There's differences yes but people just skate their board backwards when going switch anyway which doesn't seem logical. If the nose and tail were that important you wouldn't skate the board backwards going switch.


I get that there's differences. (I used to do hardflips off the nose when I ride normal boards) But it feels almost wasteful not having a twin tail because they last so much longer unless you skate tons of switch.

[Dan Gerous]

Even though I have a few Ishod/Worrest 8.25/8.3 Slick twin tails on ice, I just impulse bought the Foy 8.5 twin tail.

¯\_(ツ)_/¯

I guess I can justify it by telling myself I could set it with bigger/wider/squarer wheels for crustier spots, keep the DLX with smaller Spitfire Classics for smoother spots...

[Xen]

Even though I have a few Ishod/Worrest 8.25/8.3 Slick twin tails on ice, I just impulse bought the Foy 8.5 twin tail.

¯\_(ツ)_/¯

I guess I can justify it by telling myself I could set it with bigger/wider/squarer wheels for crustier spots, keep the DLX with smaller Spitfire Classics for smoother spots...

I'm sitting on two unskated Neen 8.25 twin (and been skating a pretty new 8.375 UMA)...but my Foy twin arrives tomorrow... been digging wider boards and longer WBs, but 32" boards make it clunky.

[Bigwheelbite]

Expand Quote

Even though I have a few Ishod/Worrest 8.25/8.3 Slick twin tails on ice, I just impulse bought the Foy 8.5 twin tail.

¯\_(ツ)_/¯

I guess I can justify it by telling myself I could set it with bigger/wider/squarer wheels for crustier spots, keep the DLX with smaller Spitfire Classics for smoother spots...

[close]

I'm sitting on two unskated Neen 8.25 twin (and been skating a pretty new 8.375 UMA)...but my Foy twin arrives tomorrow... een digging wider boards and longer WBs, but 32" boards make it clunky.

Let us know how they skate pls dude

[Sonny Paluso]

Chems tool .375in adjustment on the tail will yield similar "twin tail/nose" effect. A typical 8.5 w/14.5 wb, will turn into 7"N/7.1ishT with 14.125wb. May have to add risers or bigger wheels to offset pop angle. Nose will still be steeper though.

[Easy Slider]

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

Ok I measured but with a metric measure.

Wheelbase is 36.7 cm = 14.44 inch so 14.5 seems correct
Width 21.5 cm = 8.46 inch so 8.5 seems correct
Length 83 cm = 32.67 so it‘s a bit longer than 32

[144p]

I got to ride a prototype of the welcome twin and helped a bit with the dimensions.
Loved the feel, its a beaut.

[Woodshop]

Expand Quote

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

[close]

Ok I measured but with a metric measure.

Wheelbase is 36.7 cm = 14.44 inch so 14.5 seems correct
Width 21.5 cm = 8.46 inch so 8.5 seems correct
Length 83 cm = 32.67 so it‘s a bit longer than 32

Was the length measured with the concave (usually longer) or straight across (usually shorter)?

I recall for boards of about 32 measured straight across, they come up about 32.5 measured with the concave.

Not doubting you either, just checking / wanting to clarify.

Thanks.

[Easy Slider]

Expand Quote

Expand Quote

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

[close]

Ok I measured but with a metric measure.

Wheelbase is 36.7 cm = 14.44 inch so 14.5 seems correct
Width 21.5 cm = 8.46 inch so 8.5 seems correct
Length 83 cm = 32.67 so it‘s a bit longer than 32

[close]

Was the length measured with the concave (usually longer) or straight across (usually shorter)?

I recall for boards of about 32 measured straight across, they come up about 32.5 measured with the concave.

Not doubting you either, just checking / wanting to clarify.

Thanks.

Measured straight across. And no problem, I am a measuring novice so it‘s ok to double check 

[Woodshop]

Expand Quote

Expand Quote

Expand Quote

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

[close]

Ok I measured but with a metric measure.

Wheelbase is 36.7 cm = 14.44 inch so 14.5 seems correct
Width 21.5 cm = 8.46 inch so 8.5 seems correct
Length 83 cm = 32.67 so it‘s a bit longer than 32

[close]

Was the length measured with the concave (usually longer) or straight across (usually shorter)?

I recall for boards of about 32 measured straight across, they come up about 32.5 measured with the concave.

Not doubting you either, just checking / wanting to clarify.

Thanks.

[close]

Measured straight across. And no problem, I am a measuring novice so it‘s ok to double check 

Easy!

So it really is a LLLOOONNNGGG board.

Twin nose would definitely make it longer than twin tail, but I wasn't sure quite how much.


So was it pretty much right on 7" each kick?

You probably already mentioned earlier, but I had already started typing the message.

[Easy Slider]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

@Easy Slider

Did you happen to measure your 8.5" Neen decks? Curious if they are actually 8.5x32x14.5 seeing as the Foy posted dim are wrong around the web.

[close]

Ok I measured but with a metric measure.

Wheelbase is 36.7 cm = 14.44 inch so 14.5 seems correct
Width 21.5 cm = 8.46 inch so 8.5 seems correct
Length 83 cm = 32.67 so it‘s a bit longer than 32

[close]

Was the length measured with the concave (usually longer) or straight across (usually shorter)?

I recall for boards of about 32 measured straight across, they come up about 32.5 measured with the concave.

Not doubting you either, just checking / wanting to clarify.

Thanks.

[close]

Measured straight across. And no problem, I am a measuring novice so it‘s ok to double check 

[close]

Easy!

So it really is a LLLOOONNNGGG board.

Twin nose would definitely make it longer than twin tail, but I wasn't sure quite how much.


So was it pretty much right on 7" each kick?

You probably already mentioned earlier, but I had already started typing the message.

I won‘t tolerate any slandering my board as a longboard 

Jk, yes the kicks are pretty much right on 7‘ each.

[burm]

Expand Quote

Expand Quote

Never understood why skateboards were designed with a nose and tail tbh. Whoever came up with that stupid idea anyway? Once you get used to skating a symmetrical deck it feels so shit going back to a regular deck with nose & tail.

Symmetrical is life…

[close]

Paul Schmitt has said in multiple interviews that having different noses and tails allow you to have the equivalent of two blades in your pocketknife.  Sometimes a trick may be easier off one end of the board vs the other.   I have notice that I can land a few certain tricks more regularly skating my directional board backwards.

That said, I still dig twin tails - especially on mini ramps. I hate skating a mini with my board backwards and on a regular board will always try to do two shove tricks in a row to get it back as quick as possible.

[close]

Nothing against you and Schmitt personally but I hate that viewpoint. If people started with twin tails I doubt that would be an arguement. There's differences yes but people just skate their board backwards when going switch anyway which doesn't seem logical. If the nose and tail were that important you wouldn't skate the board backwards going switch.


I get that there's differences. (I used to do hardflips off the nose when I ride normal boards) But it feels almost wasteful not having a twin tail because they last so much longer unless you skate tons of switch.

I think the general reasoning is that the nose being longer makes it easier to pop, ie hits the ground faster, so it helps with your weaker foot (nollies and switch). But due to this you also get a lesser angle, so you can still pop higher from the tail.

If your switch and nollie tricks are just fine on a twin tail this is probably a non-issue for you then.

[burm]

Expand Quote

Expand Quote

Expand Quote

Never understood why skateboards were designed with a nose and tail tbh. Whoever came up with that stupid idea anyway? Once you get used to skating a symmetrical deck it feels so shit going back to a regular deck with nose & tail.

Symmetrical is life…

[close]

Paul Schmitt has said in multiple interviews that having different noses and tails allow you to have the equivalent of two blades in your pocketknife.  Sometimes a trick may be easier off one end of the board vs the other.   I have notice that I can land a few certain tricks more regularly skating my directional board backwards.

That said, I still dig twin tails - especially on mini ramps. I hate skating a mini with my board backwards and on a regular board will always try to do two shove tricks in a row to get it back as quick as possible.

[close]

Nothing against you and Schmitt personally but I hate that viewpoint. If people started with twin tails I doubt that would be an arguement. There's differences yes but people just skate their board backwards when going switch anyway which doesn't seem logical. If the nose and tail were that important you wouldn't skate the board backwards going switch.


I get that there's differences. (I used to do hardflips off the nose when I ride normal boards) But it feels almost wasteful not having a twin tail because they last so much longer unless you skate tons of switch.

[close]

I think the general reasoning is that the nose being longer makes it easier to pop, ie hits the ground faster, so it helps with your weaker foot (nollies and switch). But due to this you also get a lesser angle, so you can still pop higher from the tail.

If your switch and nollie tricks are just fine on a twin tail this is probably a non-issue for you then.

Boards started with smaller/nonexistent noses after all, then evolved past the point of symmentry into the elongated noses, it’s not like they ”started off” with longer noses and just never thought to make them symmetrical.