The Set-up Thread

[stets]

Post-Christmas-Complete time. Always wanted to try to piece together the lightest board possible. Thanks to the recent stimulus check, and getting my job back a few months ago, I had some extra money to throw at it.

Almost Mullen Uberlight, 8.375
Tensor Mag Light 5.75, stripped paint and modded (check out the Truck set-ups thread for that nerdery)
Spitfire Flashpoint 48mm wheels, slight conical shape
Andale P-Rod Swiss
Jessup
Enjoi Gender Bender hardware



Whole complete weighs 2097g. My just-retired 8.375 Quasi with heavily ground-to-axle Thunder 149's and 53mm Spitfire F4 conicals weighs 2403g, for reference.

Board without grip is actually heavier than a normal Resin-7 board of slightly larger dimensions (1280g for the Uber Light, and only 1240g for an 8.38 Real Full with a longer wheelbase!). Dang you and your false advertising Almost! Oh well, it will be a nice and stiff board.

I might swap the board out for the Real and a set of 54mm F4's if this feels weird after a couple weeks.

[gin]

Whole complete weighs 2097g. My just-retired 8.375 Quasi with heavily ground-to-axle Thunder 149's and 53mm Spitfire F4 conicals weighs 2403g, for reference.

Dang, so compared to new 149's that's likely almost a pound lighter. Better be careful when popping with all the flight restrictions now 

[Noble Experiment]

First crailtap deck in a while. Haven’t had a chance to actually skate it yet, only mellow cruising cuz I’m injured, but it feels good so far. The dimensions are pretty close to Bakers 8.475 shape, which is my favorite shape of all time, so I feel like it should feel pretty good for popping and flip tricks n such. Ventures on a 31.5-32 length deck with a 14-14.25 WB is definitely in the goldie locks zone for me.

Girl G033 shape, 8.5
Venture 5.8s
Spitfire 54mm 99A F4s
Random assortment of bearings and allen hardware

[Frank and Fred]

Post-Christmas-Complete time. Always wanted to try to piece together the lightest board possible. Thanks to the recent stimulus check, and getting my job back a few months ago, I had some extra money to throw at it.

Almost Mullen Uberlight, 8.375
Tensor Mag Light 5.75, stripped paint and modded (check out the Truck set-ups thread for that nerdery)
Spitfire Flashpoint 48mm wheels, slight conical shape
Andale P-Rod Swiss
Jessup
Enjoi Gender Bender hardware



Whole complete weighs 2097g. My just-retired 8.375 Quasi with heavily ground-to-axle Thunder 149's and 53mm Spitfire F4 conicals weighs 2403g, for reference.

Board without grip is actually heavier than a normal Resin-7 board of slightly larger dimensions (1280g for the Uber Light, and only 1240g for an 8.38 Real Full with a longer wheelbase!). Dang you and your false advertising Almost! Oh well, it will be a nice and stiff board.

I might swap the board out for the Real and a set of 54mm F4's if this feels weird after a couple weeks.

Where did you find those 48mm Spits? I'm setting up a 90s inspired set up and was looking for some small wheels but ultimately could not bring myself to go smaller than 50mm and have some Lil Smokies on the way.

[rocklobster]

The big Z has them:
https://www.zumiez.com/skate/wheels.html?brand=spitfire&d=4294967137

[jakeumms]

The big Z has them:
https://www.zumiez.com/skate/wheels.html?brand=spitfire&d=4294967137

They have a lotta sizes and no OG classics. I wonder if this is meant to be a replacement? Also got a tread which seems odd

[stets]

Expand Quote

Almost Mullen Uberlight, 8.375
Tensor Mag Light 5.75, stripped paint and modded (check out the Truck set-ups thread for that nerdery)
Spitfire Flashpoint 48mm wheels, slight conical shape
Andale P-Rod Swiss
Jessup
Enjoi Gender Bender hardware

[close]

Where did you find those 48mm Spits? I'm setting up a 90s inspired set up and was looking for some small wheels but ultimately could not bring myself to go smaller than 50mm and have some Lil Smokies on the way.

B-52's is right, bought them via the big ol Z. First thing I have bought from them in years. I think the Flashpoint series is an exclusive to Zumiez? The have multiple sizes, colors, and shapes. But these are the exact ones I got: https://www.zumiez.com/spitfire-flashpoint-48mm-99a-natural-skateboard-wheels.html

[GardenSkater77]

Big head 48

http://www.nordboards.com/spitfirewheels.html

[Gray Imp Sausage Metal]

First crailtap deck in a while. Haven’t had a chance to actually skate it yet, only mellow cruising cuz I’m injured, but it feels good so far. The dimensions are pretty close to Bakers 8.475 shape, which is my favorite shape of all time, so I feel like it should feel pretty good for popping and flip tricks n such. Ventures on a 31.5-32 length deck with a 14-14.25 WB is definitely in the goldie locks zone for me.

Girl G033 shape, 8.5
Venture 5.8s
Spitfire 54mm 99A F4s
Random assortment of bearings and allen hardware

such a clean board, I was actually contemplating the love seat version of it for a few weeks...

[Mbrimson88]

Expand Quote

The big Z has them:
https://www.zumiez.com/skate/wheels.html?brand=spitfire&d=4294967137

[close]

They have a lotta sizes and no OG classics. I wonder if this is meant to be a replacement? Also got a tread which seems odd

Those ones are the original or classic formula, not Formula Four, so depending on how you skate, they are the old faithful Spitfires that some people still love, or if you are more into Formula Four and never want to look back, they are the sound flatspots are made of.

I can and still ride either, but Formula Four are way better and longer lasting.
 
Also I think we are all a bit spoiled by having such good wheels nowdays in so many options of Formula Four, but I wouldn't have it any other way.

[RichardBarkley]

Polar 8.375, 14.5wb
Thunder 149
F4 97a 54

The wheel base is just as long as p9 but feels shorter for some reason. Which will take some getting used to.

[jay_nev]

Polar 8.375, 14.5wb
Thunder 149
F4 97a 54

The wheel base is just as long as p9 but feels shorter for some reason. Which will take some getting used to.

.25” longer? How are those 97a treating you. Nice set ups.

[RichardBarkley]

Expand Quote

Polar 8.375, 14.5wb
Thunder 149
F4 97a 54

The wheel base is just as long as p9 but feels shorter for some reason. Which will take some getting used to.

[close]

.25” longer? How are those 97a treating you. Nice set ups.

Cheers. They are both advertised as 14.5

Must measure them both later

I love the 97a. They're the perfect wheel I think.

I pretty much just skate crust. They perform exactly like the 99s but just that bit creamier on the streets

[jay_nev]

@RichardBarkley i meant one is longer in length, but yes the 14.5” wb is the same for both. Cream on the streets sound good

[RichardBarkley]

@RichardBarkley i meant one is longer in length, but yes the 14.5” wb is the same for both. Cream on the streets sound good

Ah gotcha.

Yep I think that's it.

[jakeumms]

I can't decide if street creamers is a great or terrible name for a wheel company

[GoneWithTheSchwinn]

Only if it's porn related.

[white guy in a durag]

My ventures we're feeling lonely after I swapped them for aces, so I decided to set them up on this egg I've had in my stash for ages and try out rails.



Heroin Golden Egg - 9.125", 8.625" over the trucks, 14.38" WB
Venture 5.8
Spitfire 97a classics 54mm
Black Panthers
Rib Bones

[kimura]

I got a set of those 97a F4 wheels. They are the shiz

[Fhk]

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml
Jessup

[fs1/2cab]

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml
Jessup

Is that the G027 shape with the 6.8" tail? I am curious about that shape, tell us how you like it.

[Fhk]

Expand Quote

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml

Jessup

[close]

Is that the G027 shape with the 6.8" tail? I am curious about that shape, tell us how you like it.

Yessir it is the G027. Unfortunately I only have 2 stand still/2 beer buzz living room sessions on it, and the tail feels awesome. I really love the way my tre's feel with it. I know the thought of the tail being longer on a popsicle made my cringe, but visually the nose still appears longer so no worries there. I will definately report back if I can skate my local indoor sometime..somehow..someday.

[fs1/2cab]

Expand Quote

Expand Quote

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml

Jessup

[close]

Is that the G027 shape with the 6.8" tail? I am curious about that shape, tell us how you like it.

[close]

Yessir it is the G027. Unfortunately I only have 2 stand still/2 beer buzz living room sessions on it, and the tail feels awesome. I really love the way my tre's feel with it. I know the thought of the tail being longer on a popsicle made my cringe, but visually the nose still appears longer so no worries there. I will definately report back if I can skate my local indoor sometime..somehow..someday.

Ha yeah man, exactly what I've been stressing about. The tail being a bit longer as the nose. But can only be good for tailslides, wheelies  etc.. I think? Well not sure, alljust  theories in my head until I get one or anyone reports here.

*edit cos typo

[FrozenIndustries]

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml
Jessup

Just copped this same graphic on the loveseat. After hearing about the long tail I am tempted to try this shape as well.

[Ok]

Expand Quote

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml
Jessup

[close]

Just copped this same graphic on the loveseat. After hearing about the long tail I am tempted to try this shape as well.

Graphic is kinda sick.
This shape talk is intriguing. Crail wood (very decent) or ps (best imo)?

33s are too fun
S/o the homie who hooked me up

[TurdyBird]

Expand Quote

Expand Quote

My other "small" setup I can't wait to try this one.
8.25 Girl
Ace 33
51mm Sml
Jessup

[close]

Just copped this same graphic on the loveseat. After hearing about the long tail I am tempted to try this shape as well.

[close]

Graphic is kinda sick.
This shape talk is intriguing. Crail wood (very decent) or ps (best imo)?

33s are too fun
S/o the homie who hooked me up

Stoked for you! Might give Crail a chance. Use to be my fav

[Lou Strux]

Another one, just because.

BBS 8.5”/14.5” square tail sample, shape # unknown
Thunder Team Edition 149s w/ new plates
Spitfire F4 Conical Full 56mm, 99du
Bones Swiss
Mob grips
1” hardware (Roughneck?)

[GoneWithTheSchwinn]

Not a fan of clear grip, but your application of it on this deck is superb. Color combos are perfect.

[Mbrimson88]

Another one, just because.

BBS 8.5”/14.5” square tail sample, shape # unknown
Thunder Team Edition 149s w/ new plates
Spitfire F4 Conical Full 56mm, 99du
Bones Swiss
Mob grips
1” hardware (Roughneck?)

Reminds me of the 25% less graphic AH boards from back around 2003 or so.  They were listed as pricepoint decks but they were still the same wood and skated great!

Interesting on the fully square tail, and a good time to learn tail blocks (or do more if you know how) on anything and everything.

[milk crate]

...put the Labor deck on hold for a moment while I continue fanning the stoke from the petting zoo and destination unknown


Anti-Hero 8.18
Thunder 149ii
SF F4 52mm 99a
Swiss
Jessup

i know this is an old board but does anyone know what the people are saying on this board, cow says "fucking tourists" ?