The Set-up Thread

[typeischeap]

New deck and wheels for the daily...I've been traveling with and skating backup setups so it wasn't completely needed but it was time... 3rd Polar 8.5 in a row but first without wheel wells so sized down from 56mm to 53mm.

Polar Gonzalez 8.5x32.125x14.375
Indy Hollow Forged 159
SF F4 Lock-ins 53mm/99du
Bones Swiss
MOB Grip
Minilogo HW
Vans Half-cabs '92

[goodatmeth]

New deck and wheels for the daily...I've been traveling with and skating backup setups so it wasn't completely needed but it was time... 3rd Polar 8.5 in a row but first without wheel wells so sized down from 56mm to 53mm.

Polar Gonzalez 8.5x32.125x14.375
Indy Hollow Forged 159
SF F4 Lock-ins 53mm/99du
Bones Swiss
MOB Grip
Minilogo HW
Vans Half-cabs '92

Nice setup. How long did you skate the old one? Looks pretty much new

[typeischeap]

Well that was inevitable, ha. Just over 3 months...it's been almost all backyard miniramp and transition at parks for this one, plus I have specific travel setups.

[Freelancevagrant]

Bought myself a present





Frog Chris Milic 10” x 31.625” with 14.25-14.75” wb
Film 6.5 trucks
Spitfire f4 conical fulls 54mm 99a
Bones Big balls
Bronze 1” Allen
Mob

[funeral_tuxedo]

Creature Brue Killer 12oz 7.80" x 30.45" with 14.25" wheelbase
Independent 109 standards
OJ Elite Hardline 55mm 99a
Jessup Ultra
Mini Logo bearings
Powell Peralta Rib Bones
1" hardware

Waiting for the rain to end so I can take it to the curbs and transition. 129s would be a way better fit for this board but I wanted an excuse to use 109s for something other than cruising. Not using this as a cruiser board either, it's going to be used as a standard skateboard.

that setup looks so fun @yourbreakfsat

[BartHarleyJarvis]

Hockey 8.75
Venture 5.8 Hollows
Spit F4 conical 52s
Quantums
Bender 7/8” allen
Mob

Almost always wearing some LRABs

[big_kev_215]

Expand Quote

Limo 8.38”
Ace 44 Classics
Spitfire F4 55mm Classics
Swiss
Pepper
Lil Jawns Rails
Ishods

[close]

how you like the limo? I want to get that same graphic in 8.18. never had one of their boards

I’m really liking it.  Relatively steep concave.  Kicks aren’t quite as squared off as FA/Hockey.  Also the BBS slicks feel really solid.  I had a couple 917 and Polar ones in the past. 

[DeepSpace9mm]

Huffer
AF1 66s w/ hollow axle
1/8” risers
F4 OG Classics 55mm
Swiss 6

I’m excited to try the Huffer shape.
Might swap the wheels for larger OG classics.

[pops]

Huffer
AF1 66s w/ hollow axle
1/8” risers
F4 OG Classics 55mm
Swiss 6

I’m excited to try the Huffer shape.
Might swap the wheels for larger OG classics.

Nice grip job. It's always pleasure to see a Huffer. It's simply the best board.

[GBLange]

Huffer
AF1 66s w/ hollow axle
1/8” risers
F4 OG Classics 55mm
Swiss 6

I’m excited to try the Huffer shape.
Might swap the wheels for larger OG classics.

huffer for the win

[Sk.A.T.A.N]

I usually ride 8.25 on my street deck, and I have a 10inch cruiser that is super fun, so I wanted to have something in between:



Heroin x French x Mandy 8.88 w/Mob
Venture 6.1 V-Hollow w/bones meds
Bones Big Balls
Powell Dragon’s 54mm
Bronze Allen Hardware 1”
Diamond 1/8 baseplates

Not too sold on the Dragons, definitely got caught by the marketing, but I’ll give them 1 more chance.

[Big Baby Jesus]

8.5 Polar with 14.375 WB
149 Indy FH w/ 96du aftermarket bushings
Spitfire 54mm CF 99du
Bones Big Balls
Bronze Hardware
Pepper Grip

Converse Cons Fastbreak

[Lee Ralphs Dear Old Mum]

Huffer
AF1 66s w/ hollow axle
1/8” risers
F4 OG Classics 55mm
Swiss 6

I’m excited to try the Huffer shape.
Might swap the wheels for larger OG classics.

Perfect. I think you'll like the mid sized wheels on that. No hollow kingpin on those Af1s?

[BartHarleyJarvis]

Huffer
AF1 66s w/ hollow axle
1/8” risers
F4 OG Classics 55mm
Swiss 6

I’m excited to try the Huffer shape.
Might swap the wheels for larger OG classics.

@DeepSpace9mm give us some updates in the “cult of the huffer” thread. I set mine up initially with those same AF1 66s and ended up sizing down to an 8.5” axle truck

[DeepSpace9mm]

Perfect. I think you'll like the mid sized wheels on that. No hollow kingpin on those Af1s?

Thanks!

No hollow kingpin on these because they’re a Frankenstein set.

I took these hangers with the hollow axle off a set that had I had warrantied due to loose kingpins and I slapped them on regular AF1 baseplates.

I do wish they were hollow kingpins.
Now I have 2 sets of 66’s though, so that’s cool. One set with hollow axle and kingpin, and this set thats just got the hollow axle.

[DeepSpace9mm]

I usually ride 8.25 on my street deck, and I have a 10inch cruiser that is super fun, so I wanted to have something in between:



Heroin x French x Mandy 8.88 w/Mob
Venture 6.1 V-Hollow w/bones meds
Bones Big Balls
Powell Dragon’s 54mm
Bronze Allen Hardware 1”
Diamond 1/8 baseplates

Not too sold on the Dragons, definitely got caught by the marketing, but I’ll give them 1 more chance.

Hell yeah, dope setup!
With the 6.1’s too.
I’d probably also put the dragon wheels on that setup if I had it.
I’m feelin that grip job too.

[nosneb]

Shortys 7.75
Black magic
Venture low 5.0
Bronze Allen key
Spitfire F4 48mm
Bones big balls

[FROTHY]

I recently started pressing and finishing boards at home. I'm coming back from a surgery and haven't really skated one besides rolling around the block, but I've had some good reviews from friends. Just set this up for my return to skating, which is gradually going to start about now.

"The Department of Sidewalks" 8.88" wide, about 8.5" over trucks, 33", 14.25wb
Thunder 148
F4 53mm conical full
reds
jessup

[iw0]

I recently started pressing and finishing boards at home. I'm coming back from a surgery and haven't really skated one besides rolling around the block, but I've had some good reviews from friends. Just set this up for my return to skating, which is gradually going to start about now.

"The Department of Sidewalks" 8.88" wide, about 8.5" over trucks, 33", 14.25wb
Thunder 148
F4 53mm conical full
reds
jessup

very nice, yellow top & natural bottom is a classy combo

[kneebone]

Shortys 7.75
Black magic
Venture low 5.0
Bronze Allen key
Spitfire F4 48mm
Bones big balls

48mm’s have never looked so big

[TastyBurrito]

Expand Quote

Damn. This was basically my middle school setup back in 1996

Shortys 7.75
Black magic
Venture low 5.0
Bronze Allen key
Spitfire F4 48mm
Bones big balls

[close]

48mm’s have never looked so big

[Tireeedd]

Shortys 7.75
Black magic
Venture low 5.0
Bronze Allen key
Spitfire F4 48mm
Bones big balls

If you would've told me in 2012 that in 2022 we'd be riding 7.75 shorty's bloards with 48mm wheels I would've laughed and probably said sick but now this looks wonderful like an ideallic setup should.

[Lee Ralphs Dear Old Mum]

I recently started pressing and finishing boards at home. I'm coming back from a surgery and haven't really skated one besides rolling around the block, but I've had some good reviews from friends. Just set this up for my return to skating, which is gradually going to start about now.

"The Department of Sidewalks" 8.88" wide, about 8.5" over trucks, 33", 14.25wb
Thunder 148
F4 53mm conical full
reds
jessup

That's a beaut.

[Sk.A.T.A.N]

Expand Quote

I usually ride 8.25 on my street deck, and I have a 10inch cruiser that is super fun, so I wanted to have something in between:



Heroin x French x Mandy 8.88 w/Mob
Venture 6.1 V-Hollow w/bones meds
Bones Big Balls
Powell Dragon’s 54mm
Bronze Allen Hardware 1”
Diamond 1/8 baseplates

Not too sold on the Dragons, definitely got caught by the marketing, but I’ll give them 1 more chance.

[close]

Hell yeah, dope setup!
With the 6.1’s too.
I’d probably also put the dragon wheels on that setup if I had it.
I’m feelin that grip job too.

Thanks dude! I’ve been “awake” for a minute and now I found those 6.1s for half the price so I had to pull the trigger. I just change to bones bushings and they do wonders.
I had a Polar Surf Jr before but kinda hated how small the nose was and how narrow the tail felt… it was like skating a 8 inch deck tbh. So I went digging for an alternative and this deck seemed sweet to pair with the ventures as it has a 14inch WB.
Skated it a bit yesterday and it felt really good. Nice, stable and carvy, good to flip too. I might use it more often then I predicted!

[l1ll1ll1]

Sci-Fi 8.25
Mob
Venture 5.6 Hi (Loose Kit + Indy Soft Conical bottoms)
F4 56mm 99a Conical Fulls
Swiss 6
Random bolts

[switchfrontshuv]

Sci-Fi 8.25
Mob
Venture 5.6 Hi (Loose Kit + Indy Soft Conical bottoms)
F4 56mm 99a Conical Fulls
Swiss 6
Random bolts

very pleasing to the eye

[switchfrontshuv]

Tactics Blank 8.38
Independent Hollow 149 (no forged baseplate)
Spit lock-ins 57mm
Shorty's lights bolts (remember loving these as a kid lol)
modus titanium bearings (love them so far)
cringe artwork

The tactics blank actually has really good BBS quality. I've had the unfortunate experience with some skate shops that claim to have "generator" or BBS wood and immediately it feels thin, flexy, and overall just not finished like a BBS. This shit is a tank

[rocklobster]

Tactics Blank 8.38
Independent Hollow 149 (no forged baseplate)
Spit lock-ins 57mm
Shorty's lights bolts (remember loving these as a kid lol)
modus titanium bearings (love them so far)
cringe artwork

The tactics blank actually has really good BBS quality. I've had the unfortunate experience with some skate shops that claim to have "generator" or BBS wood and immediately it feels thin, flexy, and overall just not finished like a BBS. This shit is a tank

Just got done with a Tactics 8.38 and it was a treat, I'll wait till BF to stock up on boards with a similar shape / dims.

[Maccat]

8.5 Polar with 14.375 WB
149 Indy FH w/ 96du aftermarket bushings
Spitfire 54mm CF 99du
Bones Big Balls
Bronze Hardware
Pepper Grip

Converse Cons Fastbreak

Sick. What shape is this? That taper on the tail is looking good.

[typeischeap]

Sick. What shape is this? That taper on the tail is looking good.

Standard Polar popsicle shape. Always available across graphics. Roundy square nose and tapered tail. Perfection. (I'm on my 3rd.)