New royal trucks

[Rubbrick]

https://shop.ccs.com/products/royal-inverted-skateboard-trucks-raw-159mm?variant=40267131027639&gclid=Cj0KCQjwjvaYBhDlARIsAO8PkE0w_hULd-qAWCARE_-7Nx4I3BAM-BERswg_EJL0yjIOVSj4MNOlYYQaAkkpEALw_wcB

Can anybody tell me if these are the new royals? They look the same on the site but aren’t listed as “The Royals”

[LebowskisRug]

Yes they are the new ones.

@Xen did you mean that the Ace bushings felt same as stock or bad like Bones? I have a set and I want to firm these things up a tad and would like to avoid using Indy blues.

[dublak2]

I bought the new royals, but I did not like the bushings it came with. I do not know the durometer but I assume it was very soft. I tightened the kingpin so much and it still felt loose (I'm 230 lbs.) I was looking for a tight feel.

I traditionally always ride everything stock until I bought some Bones hard bushings to rectify the loose feel and left both metal washers on, skipped the Bones black washer. Night and day difference. Feels super stable and centered in the crouch.

They grinded really long for the first ride and I like the turn better than Thunder. I think these new royals got me, just wish the stock bushings weren't so squishy.

[Xen]

I bought the new royals, but I did not like the bushings it came with. I do not know the durometer but I assume it was very soft. I tightened the kingpin so much and it still felt loose (I'm 230 lbs.) I was looking for a tight feel.

I traditionally always ride everything stock until I bought some Bones hard bushings to rectify the loose feel and left both metal washers on, skipped the Bones black washer. Night and day difference. Feels super stable and centered in the crouch.

They grinded really long for the first ride and I like the turn better than Thunder. I think these new royals got me, just wish the stock bushings weren't so squishy.

At 230lbs, you def need hard bushings in there. I'm 185/190 and they need some cranking down try some Krux 92a; note that the royal bottom is taller than other brand (stock indy/deluxe bait and tackle) but not by much. Krux are much closer in height, as are Indy aftermarket’s.

[dublak2]

Expand Quote

[close]

At 230lbs, you def need hard bushings in there. I'm 185/190 and they need some cranking down try some Krux 92a; note that the royal bottom is taller than other brand (stock indy/deluxe bait and tackle) but not by much. Krux are much closer in height, as are Indy aftermarket’s.

I hear you but I have setups w/ stock Indy's, stock Slant brand (Globe), stock Thunders, and stock CCS truck. Even the cheapo trucks did not squish like the Royal bushings. I purpose some of those boards for cruising or bowl skating so they are loser, but I was getting the same feeling from the Royals with a whole hell of a lot more kingpin thread showing.

Oh well, problem solved and I'm really digging them so far after the bushing swap. Not as jittery as Thunders. I could not speak to how they "pinch" but my crooked/smith/feeble game is pretty whack so I'm not qualified.

I'm just saying they turn smooth, keep stable, and grind. Would buy again. Seacrest out.

[chinotto]

Thought id share my thoughts on ultralights. I rode them for about 6 month and just switched to aces and i think a lot of things said in this thread were my experience as well. They’re a bit trickier to manual than aces and my manuals have improved since i switched and they’re definitely harder to pinch crookeds on and lock in compared to aces, just my experience. Im having way more fun on aces, i put a hollow hanger on the lows. The aces also being lower suprisingly wheelbite less than royals.

[sebbo]

I have been skating the IKP version for about 9 months now and have no problem with pinching.
Doing a lot of crooked grinds. I flirted with the idea of getting some team thunders but the fact that their bushings
are really bad turns me off. I don't want to fiddle around with different bushings and stuff. I read a lot of suggestions in the Thunder thread  . The royal bushings are still perfect after 9 months, with no cracks whatsoever.

I stepped on some aces a while back and did some cruising. They felt really nice. But I will probably just get a new set of royals raws this time. Riding the same setup for while now and don't want to get used to something different.

[IpathCats]

I have been skating the IKP version for about 9 months now and have no problem with pinching.
Doing a lot of crooked grinds. I flirted with the idea of getting some team thunders but the fact that their bushings
are really bad turns me off. I don't want to fiddle around with different bushings and stuff. I read a lot of suggestions in the Thunder thread  . The royal bushings are still perfect after 9 months, with no cracks whatsoever.

I stepped on some aces a while back and did some cruising. They felt really nice. But I will probably just get a new set of royals raws this time. Riding the same setup for while now and don't want to get used to something different.

I went through two sets on my thunders in no time. I cracked a bottom bushing on my second set ALL THE WAY THROUGH in one session. I like to think this was just a bad set or something, but still, thats insane.

Pics of your beat royals?

[sebbo]

Pics of your beat royals?

Probably a couple of months more life in them

[LebowskisRug]

Expand Quote

I have been skating the IKP version for about 9 months now and have no problem with pinching.
Doing a lot of crooked grinds. I flirted with the idea of getting some team thunders but the fact that their bushings
are really bad turns me off. I don't want to fiddle around with different bushings and stuff. I read a lot of suggestions in the Thunder thread  . The royal bushings are still perfect after 9 months, with no cracks whatsoever.

I stepped on some aces a while back and did some cruising. They felt really nice. But I will probably just get a new set of royals raws this time. Riding the same setup for while now and don't want to get used to something different.

[close]

I went through two sets on my thunders in no time. I cracked a bottom bushing on my second set ALL THE WAY THROUGH in one session. I like to think this was just a bad set or something, but still, thats insane.

Pics of your beat royals?

I know a lot of people that skate Thunders and no one switches from stock. Most feel they're great as long as you don't live in freezing temps.

[PisstickleTypeExperience]

Is there any consensus on what are the best bushings to replace stock with? I need something hard, like 96+

[Xen]

ACE hards?

I'm running the ACE Classic (dual duro) they work just as well, if not better than stock. Didn't need to crank them down to 'comfy' - with the stocks I had threads showing, with these I don't.

If you want 96+ yeah, pick up the ACE hards.

One kid at Tampa Am was going hard with these on.

[sebbo]

One kid at Tampa Am was going hard with these on.

Yeah, saw that. A lot of the Japanese kids ride royals, right?

[jimgrude]

Expand Quote

One kid at Tampa Am was going hard with these on.

[close]

Yeah, saw that. A lot of the Japanese kids ride royals, right?

Literally never seen Royals in Japan. All Thunder, Indy, Venture and Ace.

[Xen]

Expand Quote

Expand Quote

One kid at Tampa Am was going hard with these on.

[close]

Yeah, saw that. A lot of the Japanese kids ride royals, right?

[close]

Literally never seen Royals in Japan. All Thunder, Indy, Venture and Ace.

FWIW the new Ultra Lights we’re available in JP months ahead of the US.

[jimgrude]

Expand Quote

Expand Quote

Expand Quote

One kid at Tampa Am was going hard with these on.

[close]

Yeah, saw that. A lot of the Japanese kids ride royals, right?

[close]

Literally never seen Royals in Japan. All Thunder, Indy, Venture and Ace.

[close]

FWIW the new Ultra Lights we’re available in JP months ahead of the US.

I know, I've seen it in stores, but never on anyone's board. Just like Japan has its own Theeve team, yet it seems I'm the only one dorking around with them.

[Xen]

Expand Quote

Expand Quote

Expand Quote

Expand Quote

One kid at Tampa Am was going hard with these on.

[close]

Yeah, saw that. A lot of the Japanese kids ride royals, right?

[close]

Literally never seen Royals in Japan. All Thunder, Indy, Venture and Ace.

[close]

FWIW the new Ultra Lights we’re available in JP months ahead of the US.

[close]

I know, I've seen it in stores, but never on anyone's board. Just like Japan has its own Theeve team, yet it seems I'm the only one dorking around with them.

Speaking of Theeve, they now have a ton of trucks in stock on the us website; tempted to nab some TiKings.

[backinaction]

Speaking of Theeve, they now have a ton of trucks in stock on the us website; tempted to nab some TiKings.

I don't understand Theeve pricing.  The upgrade from a steel axle to a titanium one is $14.  Then for a hollow kingpin they want $24 more after that.   Huh?

[Xen]

Expand Quote

Speaking of Theeve, they now have a ton of trucks in stock on the us website; tempted to nab some TiKings.

[close]

I don't understand Theeve pricing.  The upgrade from a steel axle to a titanium one is $14.  Then for a hollow kingpin they want $24 more after that.   Huh?

Yeah, crazy expensive, which isn't helping their already diminished popularity. But if you know, you know.

[jimgrude]

Expand Quote

Speaking of Theeve, they now have a ton of trucks in stock on the us website; tempted to nab some TiKings.

[close]

I don't understand Theeve pricing.  The upgrade from a steel axle to a titanium one is $14.  Then for a hollow kingpin they want $24 more after that.   Huh?

Yeah, TiKing isn't worth it now that they no longer come with an actual titanium kingpin. Tiax is kinda worth it if you have trouble with the axle ends getting bashed up.
For most people, however, I'd recomment the new CSX hollow, or regular CSX if you don't care about weight.

[Xen]

Expand Quote

Expand Quote

Speaking of Theeve, they now have a ton of trucks in stock on the us website; tempted to nab some TiKings.

[close]

That Ti kingpin was light AF...serious weight reduction.

I don't understand Theeve pricing.  The upgrade from a steel axle to a titanium one is $14.  Then for a hollow kingpin they want $24 more after that.   Huh?

[close]

Yeah, TiKing isn't worth it now that they no longer come with an actual titanium kingpin. .

[Shrimp Po-boy]

I had planned on switching to ventures from Indy eventually and this thread convinced me to give royals a try. Thanks guys. Ordered some 149 ultra lights from tactics with their 20% off sale. I’m going to try my best not to set them up immediately and let these Indy’s have an honorable death.

[rocklobster]

I had planned on switching to ventures from Indy eventually and this thread convinced me to give royals a try. Thanks guys. Ordered some 149 ultra lights from tactics with their 20% off sale. I’m going to try my best not to set them up immediately and let these Indy’s have an honorable death.

If anyone wants to try them they are going on SWH for $30 -ish a pair on SWH daily dose, standard raw model

[Musicaldeath107]

I grabbed a set of Pig bushings for my Ventures but they are too tall. 

They fit perfectly in the new Royals.  They are also super nice. I would say as good as the stock bushings.  Skated in colder temps, upper 30s, and they stayed consistent just like the stock bushings as well.

If you need something a little stiffer they are a great alternative.

[goodatmeth]

I grabbed a set of Pig bushings for my Ventures but they are too tall. 

They fit perfectly in the new Royals.  They are also super nice. I would say as good as the stock bushings.  Skated in colder temps, upper 30s, and they stayed consistent just like the stock bushings as well.

If you need something a little stiffer they are a great alternative.

What kind of top washer did you use? Doesn't seem like any stock washers fit them. Bones?

[Musicaldeath107]

Expand Quote

I grabbed a set of Pig bushings for my Ventures but they are too tall. 

They fit perfectly in the new Royals.  They are also super nice. I would say as good as the stock bushings.  Skated in colder temps, upper 30s, and they stayed consistent just like the stock bushings as well.

If you need something a little stiffer they are a great alternative.

[close]

What kind of top washer did you use? Doesn't seem like any stock washers fit them. Bones?

Stock Royal washer worked perfectly

[goodatmeth]

Expand Quote

Expand Quote

I grabbed a set of Pig bushings for my Ventures but they are too tall. 

They fit perfectly in the new Royals.  They are also super nice. I would say as good as the stock bushings.  Skated in colder temps, upper 30s, and they stayed consistent just like the stock bushings as well.

If you need something a little stiffer they are a great alternative.

[close]

What kind of top washer did you use? Doesn't seem like any stock washers fit them. Bones?

[close]

Stock Royal washer worked perfectly

Ok that's weird and good to know. The wider top didn't work at all with thunder, venture or ace washers, had to use some flat washers that are wider than bones.

[Shrimp Po-boy]

Two seshes in on the 149 hollows.

I think they grind better than my indy trucks did? They seem to be pushing through crusty stuff that usually stopped my Indys dead in their tracks. They turn great as well. I’m Liking them so far.

[Sila]

What decks/kick steepness has everyone been riding these with? My pop feels a bit heavy on an enjoi r7 14.25 wb. I made the change from Thunder hollow lights and along with the squishy bushings they don't feel great at the moment.

[sebbo]

What decks/kick steepness has everyone been riding these with? My pop feels a bit heavy on an enjoi r7 14.25 wb. I made the change from Thunder hollow lights and along with the squishy bushings they don't feel great at the moment.

I am riding control boards (rave, studio, poetic collective) with medium to high concave.